From: "Jastrzebski, MichalX K" <michalx.k.jastrzebski@intel.com>
To: "Jastrzebski, MichalX K" <michalx.k.jastrzebski@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe
Date: Mon, 12 Jan 2015 15:46:11 +0000 [thread overview]
Message-ID: <60ABE07DBB3A454EB7FAD707B4BB1582138D2553@IRSMSX109.ger.corp.intel.com> (raw)
In-Reply-To: <6c3329$jtfs2e@orsmga002.jf.intel.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Michal Jastrzebski
> Sent: Monday, January 12, 2015 3:43 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe
>
> Date: Mon, 12 Jan 2015 15:39:40 +0100
> Message-Id: <1421073581-6644-2-git-send-email-
> michalx.k.jastrzebski@intel.com>
> X-Mailer: git-send-email 2.1.1
> In-Reply-To: <1421073581-6644-1-git-send-email-
> michalx.k.jastrzebski@intel.com>
> References: <1421073581-6644-1-git-send-email-
> michalx.k.jastrzebski@intel.com>
>
> From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
>
>
> This patch add support for DCB in SRIOV mode. When no PFC
>
> is enabled this feature might be used as multiple queues
>
> (up to 8 or 4) for VF.
>
>
>
> It incorporate following modifications:
>
> - Allow zero rx/tx queues to be passed to rte_eth_dev_configure().
>
> Rationale:
>
> in SRIOV mode PF use first free VF to RX/TX. If VF count
>
> is 16 or 32 all recources are assigned to VFs so PF can
>
> be used only for configuration.
>
> - split nb_q_per_pool to nb_rx_q_per_pool and nb_tx_q_per_pool
>
> Rationale:
>
> rx and tx number of queue might be different if RX and TX are
>
> configured in different mode. This allow to inform VF about
>
> proper number of queues.
>
> - extern mailbox API for DCB mode
>
>
>
> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
>
> ---
>
> lib/librte_ether/rte_ethdev.c | 84 +++++++++++++++++++++---------
>
> lib/librte_ether/rte_ethdev.h | 5 +-
>
> lib/librte_pmd_e1000/igb_pf.c | 3 +-
>
> lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 10 ++--
>
> lib/librte_pmd_ixgbe/ixgbe_ethdev.h | 1 +
>
> lib/librte_pmd_ixgbe/ixgbe_pf.c | 98 ++++++++++++++++++++++++++++++--
> ---
>
> lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 7 ++-
>
> 7 files changed, 159 insertions(+), 49 deletions(-)
>
>
>
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
>
> index 95f2ceb..4c1a494 100644
>
> --- a/lib/librte_ether/rte_ethdev.c
>
> +++ b/lib/librte_ether/rte_ethdev.c
>
> @@ -333,7 +333,7 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev
> *dev, uint16_t nb_queues)
>
> dev->data->rx_queues = rte_zmalloc("ethdev->rx_queues",
>
> sizeof(dev->data->rx_queues[0]) * nb_queues,
>
> RTE_CACHE_LINE_SIZE);
>
> - if (dev->data->rx_queues == NULL) {
>
> + if (dev->data->rx_queues == NULL && nb_queues > 0) {
>
> dev->data->nb_rx_queues = 0;
>
> return -(ENOMEM);
>
> }
>
> @@ -475,7 +475,7 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev
> *dev, uint16_t nb_queues)
>
> dev->data->tx_queues = rte_zmalloc("ethdev->tx_queues",
>
> sizeof(dev->data->tx_queues[0]) * nb_queues,
>
> RTE_CACHE_LINE_SIZE);
>
> - if (dev->data->tx_queues == NULL) {
>
> + if (dev->data->tx_queues == NULL && nb_queues > 0) {
>
> dev->data->nb_tx_queues = 0;
>
> return -(ENOMEM);
>
> }
>
> @@ -507,6 +507,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
> uint16_t nb_rx_q, uint16_t nb_tx_q,
>
> const struct rte_eth_conf *dev_conf)
>
> {
>
> struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>
> + struct rte_eth_dev_info dev_info;
>
>
>
> if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
>
> /* check multi-queue mode */
>
> @@ -524,11 +525,33 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
> uint16_t nb_rx_q, uint16_t nb_tx_q,
>
> return (-EINVAL);
>
> }
>
>
>
> + if ((dev_conf->rxmode.mq_mode ==
> ETH_MQ_RX_VMDQ_DCB) &&
>
> + (dev_conf->txmode.mq_mode ==
> ETH_MQ_TX_VMDQ_DCB)) {
>
> + enum rte_eth_nb_pools rx_pools =
>
> + dev_conf-
> >rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
>
> + enum rte_eth_nb_pools tx_pools =
>
> + dev_conf-
> >tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
>
> +
>
> + if (rx_pools != tx_pools) {
>
> + /* Only equal number of pools is supported
> when
>
> + * DCB+VMDq in SRIOV */
>
> + PMD_DEBUG_TRACE("ethdev port_id=%"
> PRIu8
>
> + " SRIOV active, DCB+VMDQ
> mode, "
>
> + "number of rx and tx pools is
> not eqaul\n",
>
> + port_id);
>
> + return (-EINVAL);
>
> + }
>
> + }
>
> +
>
> + uint16_t nb_rx_q_per_pool =
> RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool;
>
> + uint16_t nb_tx_q_per_pool =
> RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
>
> +
>
> switch (dev_conf->rxmode.mq_mode) {
>
> - case ETH_MQ_RX_VMDQ_RSS:
>
> case ETH_MQ_RX_VMDQ_DCB:
>
> + break;
>
> + case ETH_MQ_RX_VMDQ_RSS:
>
> case ETH_MQ_RX_VMDQ_DCB_RSS:
>
> - /* DCB/RSS VMDQ in SRIOV mode, not implement yet
> */
>
> + /* RSS, DCB+RSS VMDQ in SRIOV mode, not
> implement yet */
>
> PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>
> " SRIOV active, "
>
> "unsupported VMDQ mq_mode rx
> %u\n",
>
> @@ -537,37 +560,32 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
> uint16_t nb_rx_q, uint16_t nb_tx_q,
>
> default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE
> */
>
> /* if nothing mq mode configure, use default scheme
> */
>
> dev->data->dev_conf.rxmode.mq_mode =
> ETH_MQ_RX_VMDQ_ONLY;
>
> - if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
>
> - RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool =
> 1;
>
> + if (nb_rx_q_per_pool > 1)
>
> + nb_rx_q_per_pool = 1;
>
> break;
>
> }
>
>
>
> switch (dev_conf->txmode.mq_mode) {
>
> - case ETH_MQ_TX_VMDQ_DCB:
>
> - /* DCB VMDQ in SRIOV mode, not implement yet */
>
> - PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>
> - " SRIOV active, "
>
> - "unsupported VMDQ mq_mode tx
> %u\n",
>
> - port_id, dev_conf-
> >txmode.mq_mode);
>
> - return (-EINVAL);
>
> + case ETH_MQ_TX_VMDQ_DCB: /* DCB VMDQ in SRIOV
> mode*/
>
> + break;
>
> default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE
> */
>
> /* if nothing mq mode configure, use default scheme
> */
>
> dev->data->dev_conf.txmode.mq_mode =
> ETH_MQ_TX_VMDQ_ONLY;
>
> - if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
>
> - RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool =
> 1;
>
> + if (nb_tx_q_per_pool > 1)
>
> + nb_tx_q_per_pool = 1;
>
> break;
>
> }
>
>
>
> /* check valid queue number */
>
> - if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) ||
>
> - (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)) {
>
> + if (nb_rx_q > nb_rx_q_per_pool || nb_tx_q >
> nb_tx_q_per_pool) {
>
> PMD_DEBUG_TRACE("ethdev port_id=%d SRIOV
> active, "
>
> - "queue number must less equal to %d\n",
>
> - port_id,
> RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool);
>
> + "rx/tx queue number must less equal to
> %d/%d\n",
>
> + port_id,
> RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool,
>
> +
> RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool);
>
> return (-EINVAL);
>
> }
>
> } else {
>
> - /* For vmdb+dcb mode check our configuration before we go
> further */
>
> + /* For vmdq+dcb mode check our configuration before we go
> further */
>
> if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
> {
>
> const struct rte_eth_vmdq_dcb_conf *conf;
>
>
>
> @@ -606,11 +624,20 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
> uint16_t nb_rx_q, uint16_t nb_tx_q,
>
> }
>
> }
>
>
>
> + /* For DCB we need to obtain maximum number of queues
> dinamically,
>
> + * as this depends on max VF exported in PF */
>
> + if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
>
> + (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB))
> {
>
> +
>
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >dev_infos_get, -ENOTSUP);
>
> + (*dev->dev_ops->dev_infos_get)(dev,
> &dev_info);
>
> + }
>
> +
>
> /* For DCB mode check our configuration before we go further
> */
>
> if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) {
>
> const struct rte_eth_dcb_rx_conf *conf;
>
>
>
> - if (nb_rx_q != ETH_DCB_NUM_QUEUES) {
>
> + if (nb_rx_q != dev_info.max_rx_queues) {
>
> PMD_DEBUG_TRACE("ethdev port_id=%d
> DCB, nb_rx_q "
>
> "!= %d\n",
>
> port_id,
> ETH_DCB_NUM_QUEUES);
>
> @@ -630,7 +657,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
> uint16_t nb_rx_q, uint16_t nb_tx_q,
>
> if (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB) {
>
> const struct rte_eth_dcb_tx_conf *conf;
>
>
>
> - if (nb_tx_q != ETH_DCB_NUM_QUEUES) {
>
> + if (nb_tx_q != dev_info.max_tx_queues) {
>
> PMD_DEBUG_TRACE("ethdev port_id=%d
> DCB, nb_tx_q "
>
> "!= %d\n",
>
> port_id,
> ETH_DCB_NUM_QUEUES);
>
> @@ -690,7 +717,10 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t
> nb_rx_q, uint16_t nb_tx_q,
>
> }
>
> if (nb_rx_q == 0) {
>
> PMD_DEBUG_TRACE("ethdev port_id=%d nb_rx_q == 0\n",
> port_id);
>
> - return (-EINVAL);
>
> + /* In SRIOV there can be no free resource for PF. So permit use
> only
>
> + * for configuration. */
>
> + if (RTE_ETH_DEV_SRIOV(dev).active == 0)
>
> + return (-EINVAL);
>
> }
>
>
>
> if (nb_tx_q > dev_info.max_tx_queues) {
>
> @@ -698,9 +728,13 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t
> nb_rx_q, uint16_t nb_tx_q,
>
> port_id, nb_tx_q, dev_info.max_tx_queues);
>
> return (-EINVAL);
>
> }
>
> +
>
> if (nb_tx_q == 0) {
>
> PMD_DEBUG_TRACE("ethdev port_id=%d nb_tx_q == 0\n",
> port_id);
>
> - return (-EINVAL);
>
> + /* In SRIOV there can be no free resource for PF. So permit use
> only
>
> + * for configuration. */
>
> + if (RTE_ETH_DEV_SRIOV(dev).active == 0)
>
> + return (-EINVAL);
>
> }
>
>
>
> /* Copy the dev_conf parameter into the dev structure */
>
> @@ -750,7 +784,7 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t
> nb_rx_q, uint16_t nb_tx_q,
>
> ETHER_MAX_LEN;
>
> }
>
>
>
> - /* multipe queue mode checking */
>
> + /* multiple queue mode checking */
>
> diag = rte_eth_dev_check_mq_mode(port_id, nb_rx_q, nb_tx_q,
> dev_conf);
>
> if (diag != 0) {
>
> PMD_DEBUG_TRACE("port%d rte_eth_dev_check_mq_mode =
> %d\n",
>
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
>
> index ce0528f..04fda83 100644
>
> --- a/lib/librte_ether/rte_ethdev.h
>
> +++ b/lib/librte_ether/rte_ethdev.h
>
> @@ -299,7 +299,7 @@ enum rte_eth_rx_mq_mode {
>
> enum rte_eth_tx_mq_mode {
>
> ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */
>
> ETH_MQ_TX_DCB, /**< For TX side,only DCB is on. */
>
> - ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is
> on. */
>
> + ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on.
> */
>
> ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */
>
> };
>
>
>
> @@ -1569,7 +1569,8 @@ struct rte_eth_dev {
>
>
>
> struct rte_eth_dev_sriov {
>
> uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */
>
> - uint8_t nb_q_per_pool; /**< rx queue number per pool */
>
> + uint8_t nb_rx_q_per_pool; /**< rx queue number per pool */
>
> + uint8_t nb_tx_q_per_pool; /**< tx queue number per pool */
>
> uint16_t def_vmdq_idx; /**< Default pool num used for PF */
>
> uint16_t def_pool_q_idx; /**< Default pool queue start reg index */
>
> };
>
> diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
>
> index bc3816a..9d2f858 100644
>
> --- a/lib/librte_pmd_e1000/igb_pf.c
>
> +++ b/lib/librte_pmd_e1000/igb_pf.c
>
> @@ -115,7 +115,8 @@ void igb_pf_host_init(struct rte_eth_dev *eth_dev)
>
> rte_panic("Cannot allocate memory for private VF data\n");
>
>
>
> RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_8_POOLS;
>
> - RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
>
> + RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
>
> + RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
>
> RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
>
> RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num *
> nb_queue);
>
>
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
>
> index 3fc3738..347f03c 100644
>
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
>
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
>
> @@ -3555,14 +3555,14 @@ static int ixgbe_set_vf_rate_limit(struct
> rte_eth_dev *dev, uint16_t vf,
>
> struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>
> struct ixgbe_vf_info *vfinfo =
>
> *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
> >dev_private));
>
> - uint8_t nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
>
> + uint8_t nb_tx_q_per_pool =
> RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
>
> uint32_t queue_stride =
>
> IXGBE_MAX_RX_QUEUE_NUM /
> RTE_ETH_DEV_SRIOV(dev).active;
>
> uint32_t queue_idx = vf * queue_stride, idx = 0, vf_idx;
>
> - uint32_t queue_end = queue_idx + nb_q_per_pool - 1;
>
> + uint32_t tx_queue_end = queue_idx + nb_tx_q_per_pool - 1;
>
> uint16_t total_rate = 0;
>
>
>
> - if (queue_end >= hw->mac.max_tx_queues)
>
> + if (tx_queue_end >= hw->mac.max_tx_queues)
>
> return -EINVAL;
>
>
>
> if (vfinfo != NULL) {
>
> @@ -3577,7 +3577,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev
> *dev, uint16_t vf,
>
> return -EINVAL;
>
>
>
> /* Store tx_rate for this vf. */
>
> - for (idx = 0; idx < nb_q_per_pool; idx++) {
>
> + for (idx = 0; idx < nb_tx_q_per_pool; idx++) {
>
> if (((uint64_t)0x1 << idx) & q_msk) {
>
> if (vfinfo[vf].tx_rate[idx] != tx_rate)
>
> vfinfo[vf].tx_rate[idx] = tx_rate;
>
> @@ -3595,7 +3595,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev
> *dev, uint16_t vf,
>
> }
>
>
>
> /* Set RTTBCNRC of each queue/pool for vf X */
>
> - for (; queue_idx <= queue_end; queue_idx++) {
>
> + for (; queue_idx <= tx_queue_end; queue_idx++) {
>
> if (0x1 & q_msk)
>
> ixgbe_set_queue_rate_limit(dev, queue_idx, tx_rate);
>
> q_msk = q_msk >> 1;
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
>
> index ca99170..ebf16e9 100644
>
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
>
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
>
> @@ -159,6 +159,7 @@ struct ixgbe_vf_info {
>
> uint16_t tx_rate[IXGBE_MAX_QUEUE_NUM_PER_VF];
>
> uint16_t vlan_count;
>
> uint8_t spoofchk_enabled;
>
> + unsigned int vf_api;
>
> };
>
>
>
> /*
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c b/lib/librte_pmd_ixgbe/ixgbe_pf.c
>
> index 51da1fd..4d30bcf 100644
>
> --- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
>
> +++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
>
> @@ -127,7 +127,8 @@ void ixgbe_pf_host_init(struct rte_eth_dev *eth_dev)
>
> RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_16_POOLS;
>
> }
>
>
>
> - RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
>
> + RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
>
> + RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
>
> RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
>
> RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num *
> nb_queue);
>
>
>
> @@ -189,7 +190,7 @@ int ixgbe_pf_host_configure(struct rte_eth_dev
> *eth_dev)
>
> hw->mac.ops.set_vmdq(hw, 0,
> RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx);
>
>
>
> /*
>
> - * SW msut set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
>
> + * SW must set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
>
> */
>
> gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
>
> gcr_ext &= ~IXGBE_GCR_EXT_VT_MODE_MASK;
>
> @@ -214,19 +215,19 @@ int ixgbe_pf_host_configure(struct rte_eth_dev
> *eth_dev)
>
> }
>
>
>
> IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
>
> - IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
>
> + IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
>
>
>
> - /*
>
> + /*
>
> * enable vlan filtering and allow all vlan tags through
>
> */
>
> - vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
>
> - vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
>
> - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
>
> + vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
>
> + vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
>
> + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
>
>
>
> - /* VFTA - enable all vlan filters */
>
> - for (i = 0; i < IXGBE_MAX_VFTA; i++) {
>
> - IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
>
> - }
>
> + /* VFTA - enable all vlan filters */
>
> + for (i = 0; i < IXGBE_MAX_VFTA; i++) {
>
> + IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
>
> + }
>
>
>
> /* Enable MAC Anti-Spoofing */
>
> hw->mac.ops.set_mac_anti_spoofing(hw, FALSE, vf_num);
>
> @@ -369,6 +370,73 @@ ixgbe_vf_reset(struct rte_eth_dev *dev, uint16_t vf,
> uint32_t *msgbuf)
>
> }
>
>
>
> static int
>
> +ixgbe_negotiate_vf_api(struct rte_eth_dev *dev, uint32_t vf, uint32_t
> *msgbuf)
>
> +{
>
> + struct ixgbe_vf_info *vfinfo =
>
> + *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
> >dev_private));
>
> + int api = msgbuf[1];
>
> +
>
> + switch (api) {
>
> + case ixgbe_mbox_api_10:
>
> + case ixgbe_mbox_api_11:
>
> + vfinfo[vf].vf_api = api;
>
> + return 0;
>
> + default:
>
> + break;
>
> + }
>
> +
>
> + RTE_LOG(DEBUG, PMD, "VF %d requested invalid api version %u\n", vf,
> api);
>
> + return -1;
>
> +}
>
> +
>
> +static int
>
> +ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
>
> +{
>
> + struct ixgbe_vf_info *vfinfo =
>
> + *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
> >dev_private));
>
> + struct ixgbe_dcb_config *dcb_cfg =
>
> + IXGBE_DEV_PRIVATE_TO_DCB_CFG(dev->data-
> >dev_private);
>
> +
>
> + uint8_t num_tcs = dcb_cfg->num_tcs.pg_tcs;
>
> +
>
> + /* verify the PF is supporting the correct APIs */
>
> + switch (vfinfo[vf].vf_api) {
>
> + case ixgbe_mbox_api_10:
>
> + case ixgbe_mbox_api_11:
>
> + break;
>
> + default:
>
> + return -1;
>
> + }
>
> +
>
> + if (RTE_ETH_DEV_SRIOV(dev).active) {
>
> + if (dev->data->dev_conf.rxmode.mq_mode ==
> ETH_MQ_RX_VMDQ_DCB)
>
> + msgbuf[IXGBE_VF_TX_QUEUES] = num_tcs;
>
> + else
>
> + msgbuf[IXGBE_VF_TX_QUEUES] = 1;
>
> +
>
> + if (dev->data->dev_conf.txmode.mq_mode ==
> ETH_MQ_TX_VMDQ_DCB)
>
> + msgbuf[IXGBE_VF_RX_QUEUES] = num_tcs;
>
> + else
>
> + msgbuf[IXGBE_VF_RX_QUEUES] = 1;
>
> + } else {
>
> + /* only allow 1 Tx queue for bandwidth limiting */
>
> + msgbuf[IXGBE_VF_TX_QUEUES] = 1;
>
> + msgbuf[IXGBE_VF_RX_QUEUES] = 1;
>
> + }
>
> +
>
> + /* notify VF of need for VLAN tag stripping, and correct queue */
>
> + if (num_tcs)
>
> + msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
>
> + else
>
> + msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
>
> +
>
> + /* notify VF of default queue */
>
> + msgbuf[IXGBE_VF_DEF_QUEUE] = 0;
>
> +
>
> + return 0;
>
> +}
>
> +
>
> +static int
>
> ixgbe_vf_set_mac_addr(struct rte_eth_dev *dev, uint32_t vf, uint32_t
> *msgbuf)
>
> {
>
> struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>
> @@ -512,6 +580,12 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev,
> uint16_t vf)
>
> case IXGBE_VF_SET_VLAN:
>
> retval = ixgbe_vf_set_vlan(dev, vf, msgbuf);
>
> break;
>
> + case IXGBE_VF_API_NEGOTIATE:
>
> + retval = ixgbe_negotiate_vf_api(dev, vf, msgbuf);
>
> + break;
>
> + case IXGBE_VF_GET_QUEUES:
>
> + retval = ixgbe_get_vf_queues(dev, vf, msgbuf);
>
> + break;
>
> default:
>
> PMD_DRV_LOG(DEBUG, "Unhandled Msg %8.8x",
> (unsigned)msgbuf[0]);
>
> retval = IXGBE_ERR_MBX;
>
> @@ -526,7 +600,7 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev,
> uint16_t vf)
>
>
>
> msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
>
>
>
> - ixgbe_write_mbx(hw, msgbuf, 1, vf);
>
> + ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
>
>
>
> return retval;
>
> }
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>
> index e10d6a2..49b44fe 100644
>
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>
> @@ -3166,10 +3166,9 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev)
>
>
>
> /* check support mq_mode for DCB */
>
> if ((dev_conf->rxmode.mq_mode != ETH_MQ_RX_VMDQ_DCB) &&
>
> - (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB))
>
> - return;
>
> -
>
> - if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES)
>
> + (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB) &&
>
> + (dev_conf->txmode.mq_mode != ETH_MQ_TX_VMDQ_DCB) &&
>
> + (dev_conf->txmode.mq_mode != ETH_MQ_TX_DCB))
>
> return;
>
>
>
> /** Configure DCB hardware **/
>
> --
>
> 1.7.9.5
>
>
Self nacked - because of wrong message format.
next prev parent reply other threads:[~2015-01-12 15:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 14:43 Michal Jastrzebski
2015-01-12 15:46 ` Jastrzebski, MichalX K [this message]
2015-01-13 10:02 ` Vlad Zolotarov
2015-01-13 10:08 ` Vlad Zolotarov
2015-01-14 0:51 ` Ouyang, Changchun
2015-01-14 9:46 ` Wodkowski, PawelX
2015-01-12 15:50 [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver Michal Jastrzebski
2015-01-12 15:50 ` [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe Michal Jastrzebski
2015-01-13 10:14 ` Vlad Zolotarov
2015-01-13 11:00 ` Wodkowski, PawelX
2015-01-14 1:00 ` Ouyang, Changchun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=60ABE07DBB3A454EB7FAD707B4BB1582138D2553@IRSMSX109.ger.corp.intel.com \
--to=michalx.k.jastrzebski@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).