DPDK patches and discussions
 help / color / mirror / Atom feed
From: fengchengwen <fengchengwen@huawei.com>
To: Mingjin Ye <mingjinx.ye@intel.com>, <dev@dpdk.org>
Cc: Simei Su <simei.su@intel.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	Ferruh Yigit <ferruh.yigit@amd.com>,
	Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Subject: Re: [PATCH v2 1/3] ethdev: add frequency adjustment API
Date: Mon, 23 Sep 2024 11:11:55 +0800	[thread overview]
Message-ID: <648dee04-2890-4f37-ac94-030f698c7992@huawei.com> (raw)
In-Reply-To: <20240910091328.922082-2-mingjinx.ye@intel.com>

Hi Mingjin,

  Why we need this API? What's the use-case?

Thanks

On 2024/9/10 17:13, Mingjin Ye wrote:
> This patch adds freq adjustment API for PTP high accuracy.
> 
> Signed-off-by: Simei Su <simei.su@intel.com>
> Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
> ---
>  doc/guides/nics/features.rst           |  4 +++-
>  doc/guides/rel_notes/release_24_11.rst | 30 +++-----------------------
>  lib/ethdev/ethdev_driver.h             |  5 +++++
>  lib/ethdev/ethdev_trace.h              |  9 ++++++++
>  lib/ethdev/ethdev_trace_points.c       |  3 +++
>  lib/ethdev/rte_ethdev.c                | 18 ++++++++++++++++
>  lib/ethdev/rte_ethdev.h                | 20 +++++++++++++++++
>  lib/ethdev/version.map                 |  3 +++
>  8 files changed, 64 insertions(+), 28 deletions(-)
> 
> diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
> index cd0115ffb3..0508f118fe 100644
> --- a/doc/guides/nics/features.rst
> +++ b/doc/guides/nics/features.rst
> @@ -677,10 +677,12 @@ Supports IEEE1588/802.1AS timestamping.
>  
>  * **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
>    ``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
> -  ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
> +  ``timesync_adjust_time``, ``timesync_adjust_freq``,
> +  ``timesync_read_time``, ``timesync_write_time``.
>  * **[related]    API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
>    ``rte_eth_timesync_read_rx_timestamp()``,
>    ``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
> +  ``rte_eth_timesync_adjust_freq()``,
>    ``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
>  
>  
> diff --git a/doc/guides/rel_notes/release_24_11.rst b/doc/guides/rel_notes/release_24_11.rst
> index 0ff70d9057..10ac35e5c0 100644
> --- a/doc/guides/rel_notes/release_24_11.rst
> +++ b/doc/guides/rel_notes/release_24_11.rst
> @@ -25,35 +25,11 @@ New Features
>  ------------
>  
>  .. This section should contain new features added in this release.
> -   Sample format:
>  
> -   * **Add a title in the past tense with a full stop.**
> +* **Added Ethernet device clock incremental rate adjustment.**
>  
> -     Add a short 1-2 sentence description in the past tense.
> -     The description should be enough to allow someone scanning
> -     the release notes to understand the new feature.
> -
> -     If the feature adds a lot of sub-features you can use a bullet list
> -     like this:
> -
> -     * Added feature foo to do something.
> -     * Enhanced feature bar to do something else.
> -
> -     Refer to the previous release notes for examples.
> -
> -     Suggested order in release notes items:
> -     * Core libs (EAL, mempool, ring, mbuf, buses)
> -     * Device abstraction libs and PMDs (ordered alphabetically by vendor name)
> -       - ethdev (lib, PMDs)
> -       - cryptodev (lib, PMDs)
> -       - eventdev (lib, PMDs)
> -       - etc
> -     * Other libs
> -     * Apps, Examples, Tools (if significant)
> -
> -     This section is a comment. Do not overwrite or remove it.
> -     Also, make sure to start the actual text at the margin.
> -     =======================================================

The above should not delete in this patch, it will remove when release

> +  Added new function ``rte_eth_timesync_adjust_freq`` to
> +  adjust the clock increment rate for Ethernet devices.
>  
>  
>  Removed Items
> diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
> index 883e59a927..68cadc14a5 100644
> --- a/lib/ethdev/ethdev_driver.h
> +++ b/lib/ethdev/ethdev_driver.h
> @@ -664,6 +664,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
>  /** @internal Function used to adjust the device clock. */
>  typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
>  
> +/** @internal Function used to adjust the clock frequency. */
> +typedef int (*eth_timesync_adjust_freq)(struct rte_eth_dev *dev, int64_t);
> +
>  /** @internal Function used to get time from the device clock. */
>  typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
>  				      struct timespec *timestamp);
> @@ -1378,6 +1381,8 @@ struct eth_dev_ops {
>  	eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
>  	/** Adjust the device clock */
>  	eth_timesync_adjust_time   timesync_adjust_time;
> +	/** Adjust the clock frequency */
> +	eth_timesync_adjust_freq   timesync_adjust_freq;
>  	/** Get the device clock time */
>  	eth_timesync_read_time     timesync_read_time;
>  	/** Set the device clock time */
> diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
> index 3bec87bfdb..e273d5853e 100644
> --- a/lib/ethdev/ethdev_trace.h
> +++ b/lib/ethdev/ethdev_trace.h
> @@ -2183,6 +2183,15 @@ RTE_TRACE_POINT_FP(
>  	rte_trace_point_emit_int(ret);
>  )
>  
> +/* Called in loop in examples/ptpclient */
> +RTE_TRACE_POINT_FP(
> +	rte_eth_trace_timesync_adjust_freq,
> +	RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t ppm, int ret),
> +	rte_trace_point_emit_u16(port_id);
> +	rte_trace_point_emit_i64(ppm);
> +	rte_trace_point_emit_int(ret);
> +)
> +
>  /* Called in loop in app/test-flow-perf */
>  RTE_TRACE_POINT_FP(
>  	rte_flow_trace_create,
> diff --git a/lib/ethdev/ethdev_trace_points.c b/lib/ethdev/ethdev_trace_points.c
> index 99e04f5893..a99fec0c1e 100644
> --- a/lib/ethdev/ethdev_trace_points.c
> +++ b/lib/ethdev/ethdev_trace_points.c
> @@ -409,6 +409,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
>  RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
>  	lib.ethdev.timesync_adjust_time)
>  
> +RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_freq,
> +	lib.ethdev.timesync_adjust_freq)
> +
>  RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
>  	lib.ethdev.timesync_read_time)
>  
> diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
> index f1c658f49e..660eab2f1e 100644
> --- a/lib/ethdev/rte_ethdev.c
> +++ b/lib/ethdev/rte_ethdev.c
> @@ -6310,6 +6310,24 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
>  	return ret;
>  }
>  
> +int
> +rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm)
> +{
> +	struct rte_eth_dev *dev;
> +	int ret;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +	dev = &rte_eth_devices[port_id];
> +
> +	if (*dev->dev_ops->timesync_adjust_freq == NULL)
> +		return -ENOTSUP;
> +	ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_freq)(dev, ppm));
> +
> +	rte_eth_trace_timesync_adjust_freq(port_id, ppm, ret);
> +
> +	return ret;
> +}
> +
>  int
>  rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
>  {
> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
> index 548fada1c7..c3587089b9 100644
> --- a/lib/ethdev/rte_ethdev.h
> +++ b/lib/ethdev/rte_ethdev.h
> @@ -5297,6 +5297,26 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
>   */
>  int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
>  
> +/**
> + * Adjust the clock increment rate on an Ethernet device.
> + *
> + * This is usually used in conjunction with other Ethdev timesync functions to
> + * synchronize the device time using the IEEE1588/802.1AS protocol.
> + *
> + * @param port_id
> + *  The port identifier of the Ethernet device.
> + * @param ppm
> + *  Parts per million with 16-bit fractional field
> + *
> + * @return
> + *   - 0: Success.
> + *   - -ENODEV: The port ID is invalid.
> + *   - -EIO: if device is removed.
> + *   - -ENOTSUP: The function is not supported by the Ethernet driver.
> + */
> +__rte_experimental
> +int rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm);
> +
>  /**
>   * Read the time from the timesync clock on an Ethernet device.
>   *
> diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
> index 1669055ca5..199480ef07 100644
> --- a/lib/ethdev/version.map
> +++ b/lib/ethdev/version.map
> @@ -325,6 +325,9 @@ EXPERIMENTAL {
>  	rte_flow_template_table_resizable;
>  	rte_flow_template_table_resize;
>  	rte_flow_template_table_resize_complete;
> +
> +	# added in 24.11
> +	rte_eth_timesync_adjust_freq;
>  };
>  
>  INTERNAL {


  parent reply	other threads:[~2024-09-23  3:12 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-05  1:31 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-05  1:31 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-05  1:31 ` [PATCH 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
2024-09-05  1:31 ` [PATCH 3/3] examples/ptpclient: add frequency adjustment support Mingjin Ye
2024-09-10  9:13 ` [PATCH v2 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-10  9:13   ` [PATCH v2 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-22 18:59     ` Ferruh Yigit
2024-09-23  3:11     ` fengchengwen [this message]
2024-09-23  6:28       ` Ye, MingjinX
2024-09-10  9:13   ` [PATCH v2 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
2024-09-10  9:13   ` [PATCH v2 3/3] examples/ptpclient: add frequency adjustment support Mingjin Ye
2024-09-22 19:06   ` [PATCH v2 0/3] add frequency adjustment support for PTP Ferruh Yigit
2024-09-23  2:47     ` Ye, MingjinX
2024-09-30  8:42   ` [PATCH v3 " Mingjin Ye
2024-09-30  8:42     ` [PATCH v3 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-30 20:51       ` Ferruh Yigit
2024-09-30  8:42     ` [PATCH v3 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
2024-09-30  8:42     ` [PATCH v3 3/3] examples/ptpclient: add frequency adjustment support Mingjin Ye
2024-09-30 20:51       ` Ferruh Yigit
2024-09-30 20:53     ` [PATCH v3 0/3] add frequency adjustment support for PTP Ferruh Yigit
2024-10-10  9:32     ` [PATCH v4 " Mingjin Ye
2024-10-10  9:32       ` [PATCH v4 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-10-11  2:53         ` [PATCH v5 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-10-11  2:53           ` [PATCH v5 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-10-11  2:53           ` [PATCH v5 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
2024-10-11  2:53           ` [PATCH v5 3/3] examples/ptpclient: add frequency adjustment Mingjin Ye
2024-10-11  6:34           ` [PATCH v6 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-10-11  6:34             ` [PATCH v6 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-10-11 23:44               ` Ferruh Yigit
2024-10-11  6:34             ` [PATCH v6 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
2024-10-11  8:02               ` Bruce Richardson
2024-10-11  9:28                 ` Ye, MingjinX
2024-10-11 23:44                 ` Ferruh Yigit
2024-10-11  6:34             ` [PATCH v6 3/3] examples/ptpclient: add frequency adjustment Mingjin Ye
2024-10-11 19:37               ` Ferruh Yigit
2024-10-15  8:22               ` [PATCH v7] " Mingjin Ye
2024-10-15 17:43                 ` Stephen Hemminger
2024-10-15 17:57                   ` Ferruh Yigit
2024-10-16  1:41                     ` Ye, MingjinX
2024-10-16 10:02                       ` Ferruh Yigit
2024-11-04  9:47                         ` Ye, MingjinX
2024-10-16  1:23                   ` Ye, MingjinX
2024-11-04  9:30                 ` Rybalchenko, Kirill
2024-11-05 23:54                   ` Ferruh Yigit
2024-10-11 23:44             ` [PATCH v6 0/3] add frequency adjustment support for PTP Ferruh Yigit
2024-10-10  9:32       ` [PATCH v4 2/3] net/ice: " Mingjin Ye
2024-10-10 10:34         ` Bruce Richardson
2024-10-10  9:32       ` [PATCH v4 3/3] examples/ptpclient: add frequency adjustment Mingjin Ye
2024-09-05 10:26 [PATCH v2 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-05 10:26 ` [PATCH v2 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-06  5:19 [PATCH v2 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-06  5:19 ` [PATCH v2 1/3] ethdev: add frequency adjustment API Mingjin Ye

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=648dee04-2890-4f37-ac94-030f698c7992@huawei.com \
    --to=fengchengwen@huawei.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@amd.com \
    --cc=mingjinx.ye@intel.com \
    --cc=simei.su@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).