From: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>
To: "Nicolau, Radu" <radu.nicolau@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Yigit, Ferruh" <ferruh.yigit@intel.com>,
"Iremonger, Bernard" <bernard.iremonger@intel.com>,
"Nicolau, Radu" <radu.nicolau@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2] ethdev: moved bypass functions to ixgbe pmd
Date: Wed, 31 May 2017 03:29:49 +0000 [thread overview]
Message-ID: <6A0DE07E22DDAD4C9103DF62FEBC09093B5C8F21@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1496071373-21907-1-git-send-email-radu.nicolau@intel.com>
Hi Radu,
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Radu Nicolau
> Sent: Monday, May 29, 2017 11:23 PM
> To: dev@dpdk.org
> Cc: Yigit, Ferruh; Iremonger, Bernard; Nicolau, Radu
> Subject: [dpdk-dev] [PATCH v2] ethdev: moved bypass functions to ixgbe
> pmd
>
> Moved all bypass functions to ixgbe pmd and removed function pointers
> from the eth_dev_ops struct.
>
> Changes in v2:
> CONFIG_RTE_NIC_BYPASS removed, new option in the IXGBE section added,
> CONFIG_RTE_LIBRTE_IXGBE_BYPASS.
> Updated test-pmd to always include the bypass commands.
>
> Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
> diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c
> b/drivers/net/ixgbe/rte_pmd_ixgbe.c
> index e8fc9a6..efcaf68 100644
> --- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
> +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
> @@ -908,3 +908,109 @@ rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
>
> return 0;
> }
> +
> +#ifdef RTE_LIBRTE_IXGBE_BYPASS
> +int
> +rte_pmd_ixgbe_bypass_init(uint8_t port_id) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
Please reference the existing code to check "is_ixgbe_supported" here. Because this API may be called by APP directly.
The same comments for all the other APIs below.
> +
> + dev = &rte_eth_devices[port_id];
> + ixgbe_bypass_init(dev);
> + return 0;
> +}
> +
> +int
> +rte_pmd_ixgbe_bypass_state_show(uint8_t port_id, uint32_t *state) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_state_show(dev, state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_state_set(uint8_t port_id, uint32_t *new_state) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_state_store(dev, new_state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_event_show(uint8_t port_id,
> + uint32_t event,
> + uint32_t *state)
> +{
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_event_show(dev, event, state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_event_store(uint8_t port_id,
> + uint32_t event,
> + uint32_t state)
> +{
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_event_store(dev, event, state); }
> +
> +int
> +rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port_id, uint32_t
> +timeout) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_wd_timeout_store(dev, timeout); }
> +
> +int
> +rte_pmd_ixgbe_bypass_ver_show(uint8_t port_id, uint32_t *ver) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_ver_show(dev, ver); }
> +
> +int
> +rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port_id, uint32_t
> +*wd_timeout) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_wd_timeout_show(dev, wd_timeout); }
> +
> +int
> +rte_pmd_ixgbe_bypass_wd_reset(uint8_t port_id) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> + return ixgbe_bypass_wd_reset(dev);
> +}
next prev parent reply other threads:[~2017-05-31 3:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-26 14:30 [dpdk-dev] [PATCH] " Radu Nicolau
2017-05-29 10:38 ` Ferruh Yigit
2017-05-29 15:22 ` [dpdk-dev] [PATCH v2] " Radu Nicolau
2017-05-31 3:29 ` Lu, Wenzhuo [this message]
2017-05-31 7:41 ` Dai, Wei
2017-05-31 11:10 ` [dpdk-dev] [PATCH v3] " Radu Nicolau
2017-06-01 0:49 ` Lu, Wenzhuo
2017-06-01 11:26 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6A0DE07E22DDAD4C9103DF62FEBC09093B5C8F21@shsmsx102.ccr.corp.intel.com \
--to=wenzhuo.lu@intel.com \
--cc=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=radu.nicolau@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).