Re: [dpdk-dev] [PATCH v2 2/2] net/i40e: add NVGRE parsing function

["Lu, Wenzhuo" <wenzhuo.lu@intel.com>]

Hi Beilei,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Beilei Xing
> Sent: Thursday, June 1, 2017 2:57 PM
> To: Wu, Jingjing
> Cc: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 2/2] net/i40e: add NVGRE parsing function
> 
> This patch adds NVGRE parsing function to support NVGRE classification.
> 
> Signed-off-by: Beilei Xing <beilei.xing@intel.com>
> ---
>  drivers/net/i40e/i40e_flow.c | 271
> ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 269 insertions(+), 2 deletions(-)

> 
>  /* 1. Last in item should be NULL as range is not supported.
> + * 2. Supported filter types: IMAC_IVLAN_TENID, IMAC_IVLAN,
> + *    IMAC_TENID, OMAC_TENID_IMAC and IMAC.
> + * 3. Mask of fields which need to be matched should be
> + *    filled with 1.
> + * 4. Mask of fields which needn't to be matched should be
> + *    filled with 0.
> + */
> +static int
> +i40e_flow_parse_nvgre_pattern(__rte_unused struct rte_eth_dev *dev,
> +			      const struct rte_flow_item *pattern,
> +			      struct rte_flow_error *error,
> +			      struct i40e_tunnel_filter_conf *filter) {
> +	const struct rte_flow_item *item = pattern;
> +	const struct rte_flow_item_eth *eth_spec;
> +	const struct rte_flow_item_eth *eth_mask;
> +	const struct rte_flow_item_nvgre *nvgre_spec;
> +	const struct rte_flow_item_nvgre *nvgre_mask;
> +	const struct rte_flow_item_vlan *vlan_spec;
> +	const struct rte_flow_item_vlan *vlan_mask;
> +	enum rte_flow_item_type item_type;
> +	uint8_t filter_type = 0;
> +	bool is_tni_masked = 0;
> +	uint8_t tni_mask[] = {0xFF, 0xFF, 0xFF};
> +	bool nvgre_flag = 0;
> +	uint32_t tenant_id_be = 0;
> +	int ret;
> +
> +	for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> +		if (item->last) {
> +			rte_flow_error_set(error, EINVAL,
> +					   RTE_FLOW_ERROR_TYPE_ITEM,
> +					   item,
> +					   "Not support range");
> +			return -rte_errno;
> +		}
> +		item_type = item->type;
> +		switch (item_type) {
> +		case RTE_FLOW_ITEM_TYPE_ETH:
> +			eth_spec = (const struct rte_flow_item_eth *)item-
> >spec;
> +			eth_mask = (const struct rte_flow_item_eth *)item-
> >mask;
> +			if ((!eth_spec && eth_mask) ||
> +			    (eth_spec && !eth_mask)) {
> +				rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						   item,
> +						   "Invalid ether spec/mask");
> +				return -rte_errno;
> +			}
> +
> +			if (eth_spec && eth_mask) {
> +				/* DST address of inner MAC shouldn't be
> masked.
> +				 * SRC address of Inner MAC should be
> masked.
> +				 */
> +				if (!is_broadcast_ether_addr(&eth_mask->dst)
> ||
> +				    !is_zero_ether_addr(&eth_mask->src) ||
> +				    eth_mask->type) {
> +					rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						   item,
> +						   "Invalid ether spec/mask");
> +					return -rte_errno;
> +				}
> +
> +				if (!nvgre_flag) {
> +					rte_memcpy(&filter->outer_mac,
> +						   &eth_spec->dst,
> +						   ETHER_ADDR_LEN);
> +					filter_type |=
> ETH_TUNNEL_FILTER_OMAC;
> +				} else {
> +					rte_memcpy(&filter->inner_mac,
> +						   &eth_spec->dst,
> +						   ETHER_ADDR_LEN);
> +					filter_type |=
> ETH_TUNNEL_FILTER_IMAC;
> +				}
> +			}
Nothing to do if both spec and mask are NULL, right? If so, would you like to add comments here?

> +
> +			break;
> +		case RTE_FLOW_ITEM_TYPE_VLAN:
> +			vlan_spec =
> +				(const struct rte_flow_item_vlan *)item-
> >spec;
> +			vlan_mask =
> +				(const struct rte_flow_item_vlan *)item-
> >mask;
> +			if (nvgre_flag) {
Why need to check nvgre_flag? Seems VLAN must be after NVGRE, so this flag is always 1.

> +				if (!(vlan_spec && vlan_mask)) {
> +					rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						   item,
> +						   "Invalid vlan item");
> +					return -rte_errno;
> +				}
> +			} else {
> +				if (vlan_spec || vlan_mask)
> +					rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						   item,
> +						   "Invalid vlan item");
> +				return -rte_errno;
> +			}
> +
> +			if (vlan_spec && vlan_mask) {
> +				if (vlan_mask->tci ==
> +				    rte_cpu_to_be_16(I40E_TCI_MASK))
> +					filter->inner_vlan =
> +					      rte_be_to_cpu_16(vlan_spec->tci)
> &
> +					      I40E_TCI_MASK;
> +				filter_type |= ETH_TUNNEL_FILTER_IVLAN;
> +			}
> +			break;
> +		case RTE_FLOW_ITEM_TYPE_IPV4:
> +			filter->ip_type = I40E_TUNNEL_IPTYPE_IPV4;
> +			/* IPv4 is used to describe protocol,
> +			 * spec and mask should be NULL.
> +			 */
> +			if (item->spec || item->mask) {
> +				rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						   item,
> +						   "Invalid IPv4 item");
> +				return -rte_errno;
> +			}
> +			break;
> +		case RTE_FLOW_ITEM_TYPE_IPV6:
> +			filter->ip_type = I40E_TUNNEL_IPTYPE_IPV6;
> +			/* IPv6 is used to describe protocol,
> +			 * spec and mask should be NULL.
> +			 */
> +			if (item->spec || item->mask) {
> +				rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						   item,
> +						   "Invalid IPv6 item");
> +				return -rte_errno;
> +			}
> +			break;
> +		case RTE_FLOW_ITEM_TYPE_NVGRE:
> +			nvgre_spec =
> +				(const struct rte_flow_item_nvgre *)item-
> >spec;
> +			nvgre_mask =
> +				(const struct rte_flow_item_nvgre *)item-
> >mask;
> +			/* Check if NVGRE item is used to describe protocol.
> +			 * If yes, both spec and mask should be NULL.
> +			 * If no, either spec or mask shouldn't be NULL.
> +			 */
> +			if ((!nvgre_spec && nvgre_mask) ||
> +			    (nvgre_spec && !nvgre_mask)) {
> +				rte_flow_error_set(error, EINVAL,
> +					   RTE_FLOW_ERROR_TYPE_ITEM,
> +					   item,
> +					   "Invalid NVGRE item");
> +				return -rte_errno;
> +			}
> +
> +			if (nvgre_spec && nvgre_mask) {
> +				is_tni_masked =
> +					!!memcmp(nvgre_mask->tni,
> tni_mask,
> +						 RTE_DIM(tni_mask));
> +				if (is_tni_masked) {
> +					rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						       item,
> +						       "Invalid TNI mask");
> +					return -rte_errno;
> +				}
> +				rte_memcpy(((uint8_t *)&tenant_id_be + 1),
> +					   nvgre_spec->tni, 3);
> +				filter->tenant_id =
> +					rte_be_to_cpu_32(tenant_id_be);
> +				filter_type |= ETH_TUNNEL_FILTER_TENID;
> +			}
A similar concern. Is here a comments for NULL spec and mask better?

> +
> +			nvgre_flag = 1;
> +			break;
> +		default:
> +			break;
> +		}
> +	}
> +
> +	ret = i40e_check_tunnel_filter_type(filter_type);
> +	if (ret < 0) {
> +		rte_flow_error_set(error, EINVAL,
> +				   RTE_FLOW_ERROR_TYPE_ITEM,
> +				   NULL,
> +				   "Invalid filter type");
> +		return -rte_errno;
> +	}
> +	filter->filter_type = filter_type;
> +
> +	filter->tunnel_type = I40E_TUNNEL_TYPE_NVGRE;
> +
> +	return 0;
> +}
> +
> +static int
> +i40e_flow_parse_nvgre_filter(struct rte_eth_dev *dev,
> +			     const struct rte_flow_attr *attr,
> +			     const struct rte_flow_item pattern[],
> +			     const struct rte_flow_action actions[],
> +			     struct rte_flow_error *error,
> +			     union i40e_filter_t *filter)
> +{
> +	struct i40e_tunnel_filter_conf *tunnel_filter =
> +		&filter->consistent_tunnel_filter;
> +	int ret;
> +
> +	ret = i40e_flow_parse_nvgre_pattern(dev, pattern,
> +					    error, tunnel_filter);
> +	if (ret)
> +		return ret;
> +
> +	ret = i40e_flow_parse_tunnel_action(dev, actions, error,
> tunnel_filter);
> +	if (ret)
> +		return ret;
> +
> +	ret = i40e_flow_parse_attr(attr, error);
> +	if (ret)
> +		return ret;
> +
> +	cons_filter_type = RTE_ETH_FILTER_TUNNEL;
> +
> +	return ret;
> +}
> +
> +/* 1. Last in item should be NULL as range is not supported.
>   * 2. Supported filter types: MPLS label.
>   * 3. Mask of fields which need to be matched should be
>   *    filled with 1.
> --
> 2.5.5