From: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
Date: 12 Jan 2015 06:44:57 -0800 [thread overview]
Message-ID: <6c3329$jtfsjp@orsmga002.jf.intel.com> (raw)
Date: Mon, 12 Jan 2015 15:39:41 +0100
Message-Id: <1421073581-6644-3-git-send-email-michalx.k.jastrzebski@intel.com>
X-Mailer: git-send-email 2.1.1
In-Reply-To: <1421073581-6644-1-git-send-email-michalx.k.jastrzebski@intel.com>
References: <1421073581-6644-1-git-send-email-michalx.k.jastrzebski@intel.com>
From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
It also clean up some old code that is not needed or wrong.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
---
app/test-pmd/cmdline.c | 4 ++--
app/test-pmd/testpmd.c | 39 +++++++++++++++++++++++++++++----------
app/test-pmd/testpmd.h | 10 ----------
3 files changed, 31 insertions(+), 22 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 882a5a2..3c60087 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1947,9 +1947,9 @@ cmd_config_dcb_parsed(void *parsed_result,
/* DCB in VT mode */
if (!strncmp(res->vt_en, "on",2))
- dcb_conf.dcb_mode = DCB_VT_ENABLED;
+ dcb_conf.vt_en = 1;
else
- dcb_conf.dcb_mode = DCB_ENABLED;
+ dcb_conf.vt_en = 0;
if (!strncmp(res->pfc_en, "on",2)) {
dcb_conf.pfc_en = 1;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 8c69756..6677a5e 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1733,7 +1733,8 @@ const uint16_t vlan_tags[] = {
};
static int
-get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
+get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf,
+ uint16_t sriov)
{
uint8_t i;
@@ -1741,7 +1742,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
* Builds up the correct configuration for dcb+vt based on the vlan tags array
* given above, and the number of traffic classes available for use.
*/
- if (dcb_conf->dcb_mode == DCB_VT_ENABLED) {
+ if (dcb_conf->vt_en == 1) {
struct rte_eth_vmdq_dcb_conf vmdq_rx_conf;
struct rte_eth_vmdq_dcb_tx_conf vmdq_tx_conf;
@@ -1758,9 +1759,17 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
vmdq_rx_conf.pool_map[i].vlan_id = vlan_tags[ i ];
vmdq_rx_conf.pool_map[i].pools = 1 << (i % vmdq_rx_conf.nb_queue_pools);
}
- for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
- vmdq_rx_conf.dcb_queue[i] = i;
- vmdq_tx_conf.dcb_queue[i] = i;
+
+ if (sriov == 0) {
+ for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
+ vmdq_rx_conf.dcb_queue[i] = i;
+ vmdq_tx_conf.dcb_queue[i] = i;
+ }
+ } else {
+ for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
+ vmdq_rx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
+ vmdq_tx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
+ }
}
/*set DCB mode of RX and TX of multiple queues*/
@@ -1818,22 +1827,32 @@ init_port_dcb_config(portid_t pid,struct dcb_config *dcb_conf)
uint16_t nb_vlan;
uint16_t i;
- /* rxq and txq configuration in dcb mode */
- nb_rxq = 128;
- nb_txq = 128;
rx_free_thresh = 64;
+ rte_port = &ports[pid];
memset(&port_conf,0,sizeof(struct rte_eth_conf));
/* Enter DCB configuration status */
dcb_config = 1;
nb_vlan = sizeof( vlan_tags )/sizeof( vlan_tags[ 0 ]);
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
- retval = get_eth_dcb_conf(&port_conf, dcb_conf);
+ retval = get_eth_dcb_conf(&port_conf, dcb_conf, rte_port->dev_info.max_vfs);
+
+ /* rxq and txq configuration in dcb mode */
+ nb_rxq = rte_port->dev_info.max_rx_queues;
+ nb_txq = rte_port->dev_info.max_tx_queues;
+
+ if (rte_port->dev_info.max_vfs) {
+ if (port_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
+ nb_rxq /= port_conf.rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
+
+ if (port_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)
+ nb_txq /= port_conf.tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
+ }
+
if (retval < 0)
return retval;
- rte_port = &ports[pid];
memcpy(&rte_port->dev_conf, &port_conf,sizeof(struct rte_eth_conf));
rte_port->rx_conf.rx_thresh = rx_thresh;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index f8b0740..8976acc 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -227,20 +227,10 @@ struct fwd_config {
portid_t nb_fwd_ports; /**< Nb. of ports involved. */
};
-/**
- * DCB mode enable
- */
-enum dcb_mode_enable
-{
- DCB_VT_ENABLED,
- DCB_ENABLED
-};
-
/*
* DCB general config info
*/
struct dcb_config {
- enum dcb_mode_enable dcb_mode;
uint8_t vt_en;
enum rte_eth_nb_tcs num_tcs;
uint8_t pfc_en;
--
1.7.9.5
next reply other threads:[~2015-01-12 14:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 14:44 Michal Jastrzebski [this message]
2015-01-12 15:46 ` Jastrzebski, MichalX K
2015-01-12 15:50 [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver Michal Jastrzebski
2015-01-12 15:50 ` [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode Michal Jastrzebski
2015-01-13 10:15 ` Vlad Zolotarov
2015-01-13 11:08 ` Wodkowski, PawelX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='6c3329$jtfsjp@orsmga002.jf.intel.com' \
--to=michalx.k.jastrzebski@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).