DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
@ 2015-01-12 14:44 Michal Jastrzebski
  2015-01-12 15:46 ` Jastrzebski, MichalX K
  0 siblings, 1 reply; 5+ messages in thread
From: Michal Jastrzebski @ 2015-01-12 14:44 UTC (permalink / raw)
  To: dev

Date: Mon, 12 Jan 2015 15:39:41 +0100
Message-Id: <1421073581-6644-3-git-send-email-michalx.k.jastrzebski@intel.com>
X-Mailer: git-send-email 2.1.1
In-Reply-To: <1421073581-6644-1-git-send-email-michalx.k.jastrzebski@intel.com>
References: <1421073581-6644-1-git-send-email-michalx.k.jastrzebski@intel.com>

From: Pawel Wodkowski <pawelx.wodkowski@intel.com>


This patch incorporate fixes to support DCB in SRIOV mode for testpmd.

It also clean up some old code that is not needed or wrong.



Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>

---

 app/test-pmd/cmdline.c |    4 ++--

 app/test-pmd/testpmd.c |   39 +++++++++++++++++++++++++++++----------

 app/test-pmd/testpmd.h |   10 ----------

 3 files changed, 31 insertions(+), 22 deletions(-)



diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c

index 882a5a2..3c60087 100644

--- a/app/test-pmd/cmdline.c

+++ b/app/test-pmd/cmdline.c

@@ -1947,9 +1947,9 @@ cmd_config_dcb_parsed(void *parsed_result,

 

 	/* DCB in VT mode */

 	if (!strncmp(res->vt_en, "on",2))

-		dcb_conf.dcb_mode = DCB_VT_ENABLED;

+		dcb_conf.vt_en = 1;

 	else

-		dcb_conf.dcb_mode = DCB_ENABLED;

+		dcb_conf.vt_en = 0;

 

 	if (!strncmp(res->pfc_en, "on",2)) {

 		dcb_conf.pfc_en = 1;

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c

index 8c69756..6677a5e 100644

--- a/app/test-pmd/testpmd.c

+++ b/app/test-pmd/testpmd.c

@@ -1733,7 +1733,8 @@ const uint16_t vlan_tags[] = {

 };

 

 static  int

-get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)

+get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf,

+	uint16_t sriov)

 {

         uint8_t i;

 

@@ -1741,7 +1742,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)

  	 * Builds up the correct configuration for dcb+vt based on the vlan tags array

  	 * given above, and the number of traffic classes available for use.

  	 */

-	if (dcb_conf->dcb_mode == DCB_VT_ENABLED) {

+	if (dcb_conf->vt_en == 1) {

 		struct rte_eth_vmdq_dcb_conf vmdq_rx_conf;

 		struct rte_eth_vmdq_dcb_tx_conf vmdq_tx_conf;

 

@@ -1758,9 +1759,17 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)

 			vmdq_rx_conf.pool_map[i].vlan_id = vlan_tags[ i ];

 			vmdq_rx_conf.pool_map[i].pools = 1 << (i % vmdq_rx_conf.nb_queue_pools);

 		}

-		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {

-			vmdq_rx_conf.dcb_queue[i] = i;

-			vmdq_tx_conf.dcb_queue[i] = i;

+

+		if (sriov == 0) {

+			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {

+				vmdq_rx_conf.dcb_queue[i] = i;

+				vmdq_tx_conf.dcb_queue[i] = i;

+			}

+		} else {

+			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {

+				vmdq_rx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;

+				vmdq_tx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;

+			}

 		}

 

 		/*set DCB mode of RX and TX of multiple queues*/

@@ -1818,22 +1827,32 @@ init_port_dcb_config(portid_t pid,struct dcb_config *dcb_conf)

 	uint16_t nb_vlan;

 	uint16_t i;

 

-	/* rxq and txq configuration in dcb mode */

-	nb_rxq = 128;

-	nb_txq = 128;

 	rx_free_thresh = 64;

 

+	rte_port = &ports[pid];

 	memset(&port_conf,0,sizeof(struct rte_eth_conf));

 	/* Enter DCB configuration status */

 	dcb_config = 1;

 

 	nb_vlan = sizeof( vlan_tags )/sizeof( vlan_tags[ 0 ]);

 	/*set configuration of DCB in vt mode and DCB in non-vt mode*/

-	retval = get_eth_dcb_conf(&port_conf, dcb_conf);

+	retval = get_eth_dcb_conf(&port_conf, dcb_conf, rte_port->dev_info.max_vfs);

+

+	/* rxq and txq configuration in dcb mode */

+	nb_rxq = rte_port->dev_info.max_rx_queues;

+	nb_txq = rte_port->dev_info.max_tx_queues;

+

+	if (rte_port->dev_info.max_vfs) {

+		if (port_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)

+			nb_rxq /= port_conf.rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;

+

+		if (port_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)

+			nb_txq /= port_conf.tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;

+	}

+

 	if (retval < 0)

 		return retval;

 

-	rte_port = &ports[pid];

 	memcpy(&rte_port->dev_conf, &port_conf,sizeof(struct rte_eth_conf));

 

 	rte_port->rx_conf.rx_thresh = rx_thresh;

diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h

index f8b0740..8976acc 100644

--- a/app/test-pmd/testpmd.h

+++ b/app/test-pmd/testpmd.h

@@ -227,20 +227,10 @@ struct fwd_config {

 	portid_t   nb_fwd_ports;    /**< Nb. of ports involved. */

 };

 

-/**

- * DCB mode enable

- */

-enum dcb_mode_enable

-{

-	DCB_VT_ENABLED,

-	DCB_ENABLED

-};

-

 /*

  * DCB general config info

  */

 struct dcb_config {

-	enum dcb_mode_enable dcb_mode;

 	uint8_t vt_en;

 	enum rte_eth_nb_tcs num_tcs;

 	uint8_t pfc_en;

-- 

1.7.9.5

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
  2015-01-12 14:44 [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode Michal Jastrzebski
@ 2015-01-12 15:46 ` Jastrzebski, MichalX K
  0 siblings, 0 replies; 5+ messages in thread
From: Jastrzebski, MichalX K @ 2015-01-12 15:46 UTC (permalink / raw)
  To: Jastrzebski, MichalX K, dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Michal Jastrzebski
> Sent: Monday, January 12, 2015 3:45 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
> 
> Date: Mon, 12 Jan 2015 15:39:41 +0100
> Message-Id: <1421073581-6644-3-git-send-email-
> michalx.k.jastrzebski@intel.com>
> X-Mailer: git-send-email 2.1.1
> In-Reply-To: <1421073581-6644-1-git-send-email-
> michalx.k.jastrzebski@intel.com>
> References: <1421073581-6644-1-git-send-email-
> michalx.k.jastrzebski@intel.com>
> 
> From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
> 
> 
> This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
> 
> It also clean up some old code that is not needed or wrong.
> 
> 
> 
> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
> 
> ---
> 
>  app/test-pmd/cmdline.c |    4 ++--
> 
>  app/test-pmd/testpmd.c |   39 +++++++++++++++++++++++++++++----------
> 
>  app/test-pmd/testpmd.h |   10 ----------
> 
>  3 files changed, 31 insertions(+), 22 deletions(-)
> 
> 
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> 
> index 882a5a2..3c60087 100644
> 
> --- a/app/test-pmd/cmdline.c
> 
> +++ b/app/test-pmd/cmdline.c
> 
> @@ -1947,9 +1947,9 @@ cmd_config_dcb_parsed(void *parsed_result,
> 
> 
> 
>  	/* DCB in VT mode */
> 
>  	if (!strncmp(res->vt_en, "on",2))
> 
> -		dcb_conf.dcb_mode = DCB_VT_ENABLED;
> 
> +		dcb_conf.vt_en = 1;
> 
>  	else
> 
> -		dcb_conf.dcb_mode = DCB_ENABLED;
> 
> +		dcb_conf.vt_en = 0;
> 
> 
> 
>  	if (!strncmp(res->pfc_en, "on",2)) {
> 
>  		dcb_conf.pfc_en = 1;
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> 
> index 8c69756..6677a5e 100644
> 
> --- a/app/test-pmd/testpmd.c
> 
> +++ b/app/test-pmd/testpmd.c
> 
> @@ -1733,7 +1733,8 @@ const uint16_t vlan_tags[] = {
> 
>  };
> 
> 
> 
>  static  int
> 
> -get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config
> *dcb_conf)
> 
> +get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config
> *dcb_conf,
> 
> +	uint16_t sriov)
> 
>  {
> 
>          uint8_t i;
> 
> 
> 
> @@ -1741,7 +1742,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
> struct dcb_config *dcb_conf)
> 
>   	 * Builds up the correct configuration for dcb+vt based on the vlan tags
> array
> 
>   	 * given above, and the number of traffic classes available for use.
> 
>   	 */
> 
> -	if (dcb_conf->dcb_mode == DCB_VT_ENABLED) {
> 
> +	if (dcb_conf->vt_en == 1) {
> 
>  		struct rte_eth_vmdq_dcb_conf vmdq_rx_conf;
> 
>  		struct rte_eth_vmdq_dcb_tx_conf vmdq_tx_conf;
> 
> 
> 
> @@ -1758,9 +1759,17 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
> struct dcb_config *dcb_conf)
> 
>  			vmdq_rx_conf.pool_map[i].vlan_id = vlan_tags[ i ];
> 
>  			vmdq_rx_conf.pool_map[i].pools = 1 << (i %
> vmdq_rx_conf.nb_queue_pools);
> 
>  		}
> 
> -		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> 
> -			vmdq_rx_conf.dcb_queue[i] = i;
> 
> -			vmdq_tx_conf.dcb_queue[i] = i;
> 
> +
> 
> +		if (sriov == 0) {
> 
> +			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> 
> +				vmdq_rx_conf.dcb_queue[i] = i;
> 
> +				vmdq_tx_conf.dcb_queue[i] = i;
> 
> +			}
> 
> +		} else {
> 
> +			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> 
> +				vmdq_rx_conf.dcb_queue[i] = i % dcb_conf-
> >num_tcs;
> 
> +				vmdq_tx_conf.dcb_queue[i] = i % dcb_conf-
> >num_tcs;
> 
> +			}
> 
>  		}
> 
> 
> 
>  		/*set DCB mode of RX and TX of multiple queues*/
> 
> @@ -1818,22 +1827,32 @@ init_port_dcb_config(portid_t pid,struct
> dcb_config *dcb_conf)
> 
>  	uint16_t nb_vlan;
> 
>  	uint16_t i;
> 
> 
> 
> -	/* rxq and txq configuration in dcb mode */
> 
> -	nb_rxq = 128;
> 
> -	nb_txq = 128;
> 
>  	rx_free_thresh = 64;
> 
> 
> 
> +	rte_port = &ports[pid];
> 
>  	memset(&port_conf,0,sizeof(struct rte_eth_conf));
> 
>  	/* Enter DCB configuration status */
> 
>  	dcb_config = 1;
> 
> 
> 
>  	nb_vlan = sizeof( vlan_tags )/sizeof( vlan_tags[ 0 ]);
> 
>  	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
> 
> -	retval = get_eth_dcb_conf(&port_conf, dcb_conf);
> 
> +	retval = get_eth_dcb_conf(&port_conf, dcb_conf, rte_port-
> >dev_info.max_vfs);
> 
> +
> 
> +	/* rxq and txq configuration in dcb mode */
> 
> +	nb_rxq = rte_port->dev_info.max_rx_queues;
> 
> +	nb_txq = rte_port->dev_info.max_tx_queues;
> 
> +
> 
> +	if (rte_port->dev_info.max_vfs) {
> 
> +		if (port_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
> 
> +			nb_rxq /=
> port_conf.rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
> 
> +
> 
> +		if (port_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)
> 
> +			nb_txq /=
> port_conf.tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
> 
> +	}
> 
> +
> 
>  	if (retval < 0)
> 
>  		return retval;
> 
> 
> 
> -	rte_port = &ports[pid];
> 
>  	memcpy(&rte_port->dev_conf, &port_conf,sizeof(struct
> rte_eth_conf));
> 
> 
> 
>  	rte_port->rx_conf.rx_thresh = rx_thresh;
> 
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> 
> index f8b0740..8976acc 100644
> 
> --- a/app/test-pmd/testpmd.h
> 
> +++ b/app/test-pmd/testpmd.h
> 
> @@ -227,20 +227,10 @@ struct fwd_config {
> 
>  	portid_t   nb_fwd_ports;    /**< Nb. of ports involved. */
> 
>  };
> 
> 
> 
> -/**
> 
> - * DCB mode enable
> 
> - */
> 
> -enum dcb_mode_enable
> 
> -{
> 
> -	DCB_VT_ENABLED,
> 
> -	DCB_ENABLED
> 
> -};
> 
> -
> 
>  /*
> 
>   * DCB general config info
> 
>   */
> 
>  struct dcb_config {
> 
> -	enum dcb_mode_enable dcb_mode;
> 
>  	uint8_t vt_en;
> 
>  	enum rte_eth_nb_tcs num_tcs;
> 
>  	uint8_t pfc_en;
> 
> --
> 
> 1.7.9.5
> 
> 
Self nacked - because of wrong message format.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
  2015-01-13 10:15   ` Vlad Zolotarov
@ 2015-01-13 11:08     ` Wodkowski, PawelX
  0 siblings, 0 replies; 5+ messages in thread
From: Wodkowski, PawelX @ 2015-01-13 11:08 UTC (permalink / raw)
  To: Vlad Zolotarov, Jastrzebski, MichalX K, dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Vlad Zolotarov
> Sent: Tuesday, January 13, 2015 11:16 AM
> To: Jastrzebski, MichalX K; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
> 
> 
> On 01/12/15 17:50, Michal Jastrzebski wrote:
> > From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
> >
> > This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
> > It also clean up some old code that is not needed or wrong.
> 
> The same here: could u, pls., separate the "cleanup" part of the patch
> from the "fixes" part into separate patches?
> 

Maybe little confusion I introduced by saying cleanups. Some code became
obsolete (like enum dcb_mode_enable) when I fixed DCV in VT mode, so
removing those parts I called "cleanups". Please consider them to be a fixes.

Pawel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
  2015-01-12 15:50 ` [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode Michal Jastrzebski
@ 2015-01-13 10:15   ` Vlad Zolotarov
  2015-01-13 11:08     ` Wodkowski, PawelX
  0 siblings, 1 reply; 5+ messages in thread
From: Vlad Zolotarov @ 2015-01-13 10:15 UTC (permalink / raw)
  To: Michal Jastrzebski, dev


On 01/12/15 17:50, Michal Jastrzebski wrote:
> From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
>
> This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
> It also clean up some old code that is not needed or wrong.

The same here: could u, pls., separate the "cleanup" part of the patch 
from the "fixes" part into separate patches?

thanks,
vlad

>
> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
> ---
>   app/test-pmd/cmdline.c |    4 ++--
>   app/test-pmd/testpmd.c |   39 +++++++++++++++++++++++++++++----------
>   app/test-pmd/testpmd.h |   10 ----------
>   3 files changed, 31 insertions(+), 22 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 882a5a2..3c60087 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -1947,9 +1947,9 @@ cmd_config_dcb_parsed(void *parsed_result,
>   
>   	/* DCB in VT mode */
>   	if (!strncmp(res->vt_en, "on",2))
> -		dcb_conf.dcb_mode = DCB_VT_ENABLED;
> +		dcb_conf.vt_en = 1;
>   	else
> -		dcb_conf.dcb_mode = DCB_ENABLED;
> +		dcb_conf.vt_en = 0;
>   
>   	if (!strncmp(res->pfc_en, "on",2)) {
>   		dcb_conf.pfc_en = 1;
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index 8c69756..6677a5e 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -1733,7 +1733,8 @@ const uint16_t vlan_tags[] = {
>   };
>   
>   static  int
> -get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
> +get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf,
> +	uint16_t sriov)
>   {
>           uint8_t i;
>   
> @@ -1741,7 +1742,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
>    	 * Builds up the correct configuration for dcb+vt based on the vlan tags array
>    	 * given above, and the number of traffic classes available for use.
>    	 */
> -	if (dcb_conf->dcb_mode == DCB_VT_ENABLED) {
> +	if (dcb_conf->vt_en == 1) {
>   		struct rte_eth_vmdq_dcb_conf vmdq_rx_conf;
>   		struct rte_eth_vmdq_dcb_tx_conf vmdq_tx_conf;
>   
> @@ -1758,9 +1759,17 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
>   			vmdq_rx_conf.pool_map[i].vlan_id = vlan_tags[ i ];
>   			vmdq_rx_conf.pool_map[i].pools = 1 << (i % vmdq_rx_conf.nb_queue_pools);
>   		}
> -		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> -			vmdq_rx_conf.dcb_queue[i] = i;
> -			vmdq_tx_conf.dcb_queue[i] = i;
> +
> +		if (sriov == 0) {
> +			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> +				vmdq_rx_conf.dcb_queue[i] = i;
> +				vmdq_tx_conf.dcb_queue[i] = i;
> +			}
> +		} else {
> +			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> +				vmdq_rx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
> +				vmdq_tx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
> +			}
>   		}
>   
>   		/*set DCB mode of RX and TX of multiple queues*/
> @@ -1818,22 +1827,32 @@ init_port_dcb_config(portid_t pid,struct dcb_config *dcb_conf)
>   	uint16_t nb_vlan;
>   	uint16_t i;
>   
> -	/* rxq and txq configuration in dcb mode */
> -	nb_rxq = 128;
> -	nb_txq = 128;
>   	rx_free_thresh = 64;
>   
> +	rte_port = &ports[pid];
>   	memset(&port_conf,0,sizeof(struct rte_eth_conf));
>   	/* Enter DCB configuration status */
>   	dcb_config = 1;
>   
>   	nb_vlan = sizeof( vlan_tags )/sizeof( vlan_tags[ 0 ]);
>   	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
> -	retval = get_eth_dcb_conf(&port_conf, dcb_conf);
> +	retval = get_eth_dcb_conf(&port_conf, dcb_conf, rte_port->dev_info.max_vfs);
> +
> +	/* rxq and txq configuration in dcb mode */
> +	nb_rxq = rte_port->dev_info.max_rx_queues;
> +	nb_txq = rte_port->dev_info.max_tx_queues;
> +
> +	if (rte_port->dev_info.max_vfs) {
> +		if (port_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
> +			nb_rxq /= port_conf.rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
> +
> +		if (port_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)
> +			nb_txq /= port_conf.tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
> +	}
> +
>   	if (retval < 0)
>   		return retval;
>   
> -	rte_port = &ports[pid];
>   	memcpy(&rte_port->dev_conf, &port_conf,sizeof(struct rte_eth_conf));
>   
>   	rte_port->rx_conf.rx_thresh = rx_thresh;
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index f8b0740..8976acc 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -227,20 +227,10 @@ struct fwd_config {
>   	portid_t   nb_fwd_ports;    /**< Nb. of ports involved. */
>   };
>   
> -/**
> - * DCB mode enable
> - */
> -enum dcb_mode_enable
> -{
> -	DCB_VT_ENABLED,
> -	DCB_ENABLED
> -};
> -
>   /*
>    * DCB general config info
>    */
>   struct dcb_config {
> -	enum dcb_mode_enable dcb_mode;
>   	uint8_t vt_en;
>   	enum rte_eth_nb_tcs num_tcs;
>   	uint8_t pfc_en;

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
  2015-01-12 15:50 [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver Michal Jastrzebski
@ 2015-01-12 15:50 ` Michal Jastrzebski
  2015-01-13 10:15   ` Vlad Zolotarov
  0 siblings, 1 reply; 5+ messages in thread
From: Michal Jastrzebski @ 2015-01-12 15:50 UTC (permalink / raw)
  To: dev

From: Pawel Wodkowski <pawelx.wodkowski@intel.com>

This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
It also clean up some old code that is not needed or wrong.

Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
---
 app/test-pmd/cmdline.c |    4 ++--
 app/test-pmd/testpmd.c |   39 +++++++++++++++++++++++++++++----------
 app/test-pmd/testpmd.h |   10 ----------
 3 files changed, 31 insertions(+), 22 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 882a5a2..3c60087 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1947,9 +1947,9 @@ cmd_config_dcb_parsed(void *parsed_result,
 
 	/* DCB in VT mode */
 	if (!strncmp(res->vt_en, "on",2))
-		dcb_conf.dcb_mode = DCB_VT_ENABLED;
+		dcb_conf.vt_en = 1;
 	else
-		dcb_conf.dcb_mode = DCB_ENABLED;
+		dcb_conf.vt_en = 0;
 
 	if (!strncmp(res->pfc_en, "on",2)) {
 		dcb_conf.pfc_en = 1;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 8c69756..6677a5e 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1733,7 +1733,8 @@ const uint16_t vlan_tags[] = {
 };
 
 static  int
-get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
+get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf,
+	uint16_t sriov)
 {
         uint8_t i;
 
@@ -1741,7 +1742,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
  	 * Builds up the correct configuration for dcb+vt based on the vlan tags array
  	 * given above, and the number of traffic classes available for use.
  	 */
-	if (dcb_conf->dcb_mode == DCB_VT_ENABLED) {
+	if (dcb_conf->vt_en == 1) {
 		struct rte_eth_vmdq_dcb_conf vmdq_rx_conf;
 		struct rte_eth_vmdq_dcb_tx_conf vmdq_tx_conf;
 
@@ -1758,9 +1759,17 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
 			vmdq_rx_conf.pool_map[i].vlan_id = vlan_tags[ i ];
 			vmdq_rx_conf.pool_map[i].pools = 1 << (i % vmdq_rx_conf.nb_queue_pools);
 		}
-		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
-			vmdq_rx_conf.dcb_queue[i] = i;
-			vmdq_tx_conf.dcb_queue[i] = i;
+
+		if (sriov == 0) {
+			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
+				vmdq_rx_conf.dcb_queue[i] = i;
+				vmdq_tx_conf.dcb_queue[i] = i;
+			}
+		} else {
+			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
+				vmdq_rx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
+				vmdq_tx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
+			}
 		}
 
 		/*set DCB mode of RX and TX of multiple queues*/
@@ -1818,22 +1827,32 @@ init_port_dcb_config(portid_t pid,struct dcb_config *dcb_conf)
 	uint16_t nb_vlan;
 	uint16_t i;
 
-	/* rxq and txq configuration in dcb mode */
-	nb_rxq = 128;
-	nb_txq = 128;
 	rx_free_thresh = 64;
 
+	rte_port = &ports[pid];
 	memset(&port_conf,0,sizeof(struct rte_eth_conf));
 	/* Enter DCB configuration status */
 	dcb_config = 1;
 
 	nb_vlan = sizeof( vlan_tags )/sizeof( vlan_tags[ 0 ]);
 	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
-	retval = get_eth_dcb_conf(&port_conf, dcb_conf);
+	retval = get_eth_dcb_conf(&port_conf, dcb_conf, rte_port->dev_info.max_vfs);
+
+	/* rxq and txq configuration in dcb mode */
+	nb_rxq = rte_port->dev_info.max_rx_queues;
+	nb_txq = rte_port->dev_info.max_tx_queues;
+
+	if (rte_port->dev_info.max_vfs) {
+		if (port_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
+			nb_rxq /= port_conf.rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
+
+		if (port_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)
+			nb_txq /= port_conf.tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
+	}
+
 	if (retval < 0)
 		return retval;
 
-	rte_port = &ports[pid];
 	memcpy(&rte_port->dev_conf, &port_conf,sizeof(struct rte_eth_conf));
 
 	rte_port->rx_conf.rx_thresh = rx_thresh;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index f8b0740..8976acc 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -227,20 +227,10 @@ struct fwd_config {
 	portid_t   nb_fwd_ports;    /**< Nb. of ports involved. */
 };
 
-/**
- * DCB mode enable
- */
-enum dcb_mode_enable
-{
-	DCB_VT_ENABLED,
-	DCB_ENABLED
-};
-
 /*
  * DCB general config info
  */
 struct dcb_config {
-	enum dcb_mode_enable dcb_mode;
 	uint8_t vt_en;
 	enum rte_eth_nb_tcs num_tcs;
 	uint8_t pfc_en;
-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2015-01-13 11:08 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-12 14:44 [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode Michal Jastrzebski
2015-01-12 15:46 ` Jastrzebski, MichalX K
2015-01-12 15:50 [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver Michal Jastrzebski
2015-01-12 15:50 ` [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode Michal Jastrzebski
2015-01-13 10:15   ` Vlad Zolotarov
2015-01-13 11:08     ` Wodkowski, PawelX

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).