DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To: dev@dpdk.org, Yongseok Koh <yskoh@mellanox.com>
Cc: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: [dpdk-dev] [PATCH v3 2/3] net/mlx5: split MAC address add/remove code
Date: Mon, 23 Apr 2018 13:09:27 +0200	[thread overview]
Message-ID: <6e7917509648466661a6a96147154fc384591971.1524477133.git.nelio.laranjeiro@6wind.com> (raw)
In-Reply-To: <cover.1524477133.git.nelio.laranjeiro@6wind.com>
In-Reply-To: <cover.1524477133.git.nelio.laranjeiro@6wind.com>

Move some code in DPDK callbacks to add/remove MAC addresses to internal
function.  This modification will be necessary to handle implement the
devop set_mc_addr_list.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
 drivers/net/mlx5/mlx5_defs.h   |  4 +-
 drivers/net/mlx5/mlx5_ethdev.c |  2 +-
 drivers/net/mlx5/mlx5_mac.c    | 86 +++++++++++++++++++++++++---------
 3 files changed, 68 insertions(+), 24 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
index 3fb2f1480..e3aa03bef 100644
--- a/drivers/net/mlx5/mlx5_defs.h
+++ b/drivers/net/mlx5/mlx5_defs.h
@@ -13,8 +13,10 @@
 /* Reported driver name. */
 #define MLX5_DRIVER_NAME "net_mlx5"
 
+/* Maximum number of simultaneous unicast MAC addresses. */
+#define MLX5_MAX_UC_MAC_ADDRESSES 128
 /* Maximum number of simultaneous MAC addresses. */
-#define MLX5_MAX_MAC_ADDRESSES 128
+#define MLX5_MAX_MAC_ADDRESSES MLX5_MAX_UC_MAC_ADDRESSES
 
 /* Maximum number of simultaneous VLAN filters. */
 #define MLX5_MAX_VLAN_IDS 128
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index ef44cc91f..99ac4cc5c 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -446,7 +446,7 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 		max = 65535;
 	info->max_rx_queues = max;
 	info->max_tx_queues = max;
-	info->max_mac_addrs = RTE_DIM(priv->mac);
+	info->max_mac_addrs = MLX5_MAX_UC_MAC_ADDRESSES;
 	info->rx_queue_offload_capa = mlx5_get_rx_queue_offloads(dev);
 	info->rx_offload_capa = (mlx5_get_rx_port_offloads() |
 				 info->rx_queue_offload_capa);
diff --git a/drivers/net/mlx5/mlx5_mac.c b/drivers/net/mlx5/mlx5_mac.c
index f24b5f759..e9334ea4a 100644
--- a/drivers/net/mlx5/mlx5_mac.c
+++ b/drivers/net/mlx5/mlx5_mac.c
@@ -57,38 +57,30 @@ mlx5_get_mac(struct rte_eth_dev *dev, uint8_t (*mac)[ETHER_ADDR_LEN])
 }
 
 /**
- * DPDK callback to remove a MAC address.
+ * Remove a MAC address from the internal array.
  *
  * @param dev
  *   Pointer to Ethernet device structure.
  * @param index
  *   MAC address index.
  */
-void
-mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+static void
+mlx5_internal_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
 {
 	struct priv *priv = dev->data->dev_private;
 	const int vf = priv->config.vf;
-	int ret;
 
-	if (index >= MLX5_MAX_MAC_ADDRESSES)
-		return;
+	assert(index < MLX5_MAX_MAC_ADDRESSES);
 	if (is_zero_ether_addr(&dev->data->mac_addrs[index]))
 		return;
 	if (vf)
 		mlx5_nl_mac_addr_remove(dev, &dev->data->mac_addrs[index],
 					index);
 	memset(&dev->data->mac_addrs[index], 0, sizeof(struct ether_addr));
-	if (!dev->data->promiscuous) {
-		ret = mlx5_traffic_restart(dev);
-		if (ret)
-			DRV_LOG(ERR, "port %u cannot restart traffic: %s",
-				dev->data->port_id, strerror(rte_errno));
-	}
 }
 
 /**
- * DPDK callback to add a MAC address.
+ * Adds a MAC address to the internal array.
  *
  * @param dev
  *   Pointer to Ethernet device structure.
@@ -96,24 +88,19 @@ mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
  *   MAC address to register.
  * @param index
  *   MAC address index.
- * @param vmdq
- *   VMDq pool index to associate address with (ignored).
  *
  * @return
  *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
-int
-mlx5_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac,
-		  uint32_t index, uint32_t vmdq __rte_unused)
+static int
+mlx5_internal_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac,
+			   uint32_t index)
 {
 	struct priv *priv = dev->data->dev_private;
 	const int vf = priv->config.vf;
 	unsigned int i;
 
-	if (index >= MLX5_MAX_MAC_ADDRESSES) {
-		rte_errno = EINVAL;
-		return -rte_errno;
-	}
+	assert(index < MLX5_MAX_MAC_ADDRESSES);
 	if (is_zero_ether_addr(mac)) {
 		rte_errno = EINVAL;
 		return -rte_errno;
@@ -136,6 +123,61 @@ mlx5_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac,
 			return ret;
 	}
 	dev->data->mac_addrs[index] = *mac;
+	return 0;
+}
+
+/**
+ * DPDK callback to remove a MAC address.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param index
+ *   MAC address index.
+ */
+void
+mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+	int ret;
+
+	if (index >= MLX5_MAX_UC_MAC_ADDRESSES)
+		return;
+	mlx5_internal_mac_addr_remove(dev, index);
+	if (!dev->data->promiscuous) {
+		ret = mlx5_traffic_restart(dev);
+		if (ret)
+			DRV_LOG(ERR, "port %u cannot restart traffic: %s",
+				dev->data->port_id, strerror(rte_errno));
+	}
+}
+
+/**
+ * DPDK callback to add a MAC address.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param mac_addr
+ *   MAC address to register.
+ * @param index
+ *   MAC address index.
+ * @param vmdq
+ *   VMDq pool index to associate address with (ignored).
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac,
+		  uint32_t index, uint32_t vmdq __rte_unused)
+{
+	int ret;
+
+	if (index >= MLX5_MAX_UC_MAC_ADDRESSES) {
+		rte_errno = EINVAL;
+		return -rte_errno;
+	}
+	ret = mlx5_internal_mac_addr_add(dev, mac, index);
+	if (ret < 0)
+		return ret;
 	if (!dev->data->promiscuous)
 		return mlx5_traffic_restart(dev);
 	return 0;
-- 
2.17.0

  parent reply	other threads:[~2018-04-23 11:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-18 11:24 [dpdk-dev] [PATCH 0/2] implement set_mc_addr devop Nelio Laranjeiro
2018-04-18 11:24 ` [dpdk-dev] [PATCH 1/2] net/mlx5: split MAC address add/remove code Nelio Laranjeiro
2018-04-18 11:24 ` [dpdk-dev] [PATCH 2/2] net/mlx5: implement multicast add list devop Nelio Laranjeiro
2018-04-18 13:50 ` [dpdk-dev] [PATCH v2 0/3] net/mlx5: implement set_mc_addr devop Nelio Laranjeiro
2018-04-18 14:43   ` Adrien Mazarguil
2018-04-23 11:09   ` [dpdk-dev] [PATCH v3 " Nelio Laranjeiro
2018-04-23 12:46     ` Shahaf Shuler
2018-04-23 11:09   ` [dpdk-dev] [PATCH v3 1/3] net/mlx5: more checks on MAC addresses Nelio Laranjeiro
2018-04-23 11:09   ` Nelio Laranjeiro [this message]
2018-04-23 11:09   ` [dpdk-dev] [PATCH v3 3/3] net/mlx5: implement multicast add list devop Nelio Laranjeiro
2018-04-18 13:50 ` [dpdk-dev] [PATCH v2 1/3] net/mlx5: more checks on MAC addresses Nelio Laranjeiro
2018-04-18 13:50 ` [dpdk-dev] [PATCH v2 2/3] net/mlx5: split MAC address add/remove code Nelio Laranjeiro
2018-04-18 13:50 ` [dpdk-dev] [PATCH v2 3/3] net/mlx5: implement multicast add list devop Nelio Laranjeiro
2018-04-23  5:52   ` Shahaf Shuler
2018-04-23  7:33     ` Nélio Laranjeiro
2018-04-23  7:57       ` Shahaf Shuler
2018-04-23  9:34         ` Nélio Laranjeiro
2018-04-23  9:58           ` Shahaf Shuler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6e7917509648466661a6a96147154fc384591971.1524477133.git.nelio.laranjeiro@6wind.com \
    --to=nelio.laranjeiro@6wind.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).