* [dpdk-dev] DPDK OVS on Ubuntu 14.04
@ 2015-12-01 6:13 Abhijeet Karve
2015-12-01 14:46 ` Polehn, Mike A
0 siblings, 1 reply; 13+ messages in thread
From: Abhijeet Karve @ 2015-12-01 6:13 UTC (permalink / raw)
To: dev; +Cc: bhavya.addep
[-- Attachment #1: Type: text/plain, Size: 3575 bytes --]
Dear All,
We are trying to install DPDK OVS on top of the openstack juno in Ubuntu
14.04 single server. We are referring following steps for executing the
same.
https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
During execution we are getting some issues with ovs-vswitchd service as
its getting hang during starting.
_________________________________________________________________________
nfv-dpdk@nfv-dpdk:~$ tail -f /var/log/openvswitch/ovs-vswitchd.log
2015-11-24T10:54:34.036Z|00006|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connecting...
2015-11-24T10:54:34.036Z|00007|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connected
2015-11-24T10:54:34.064Z|00008|bridge|INFO|ovs-vswitchd (Open vSwitch)
2.4.90
2015-11-24T11:03:42.957Z|00002|vlog|INFO|opened log file
/var/log/openvswitch/ov
s-vswitchd.log
2015-11-24T11:03:42.958Z|00003|ovs_numa|INFO|Discovered 24 CPU cores on
NUMA
nod
e 0
2015-11-24T11:03:42.958Z|00004|ovs_numa|INFO|Discovered 24 CPU cores on
NUMA
nod
e 1
2015-11-24T11:03:42.958Z|00005|ovs_numa|INFO|Discovered 2 NUMA nodes and
48 CPU
cores
2015-11-24T11:03:42.958Z|00006|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connecting...
2015-11-24T11:03:42.958Z|00007|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connected
2015-11-24T11:03:42.961Z|00008|bridge|INFO|ovs-vswitchd (Open vSwitch)
2.4.90
_________________________________________________________________________
Also, attaching output(Hugepage.txt) of “ ./ovs-vswitchd --dpdk -c 0x0FF8
-n 4 --socket-mem 1024,0 --
--log-file=/var/log/openvswitch/ovs-vswitchd.log
--pidfile=/var/run/oppenvswitch/ovs-vswitchd.pid”
- We tried seting up echo 0 >
/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages, but couldn’t
succeeded.
Can anyone please help us in getting the things if we are missing
any and causing ovs-vswitchd to stuck while starting?
Also, when we create vm in openstack with DPDK OVS, dpdkvhost-user type
interfaces are getting created automatically. If this interfaces are
getting mapped with regular br-int bridge rather than DPDK bridge br0 then
is this mean that we have successfully enabled DPDK with netdev datapath?
We really appreciate for all the advice if you have.
Thanks,
Abhijeet
Thanks & Regards
Abhijeet Karve
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
[-- Attachment #2: image002.png --]
[-- Type: image/png, Size: 108749 bytes --]
[-- Attachment #3: Hugepage issue.txt --]
[-- Type: text/plain, Size: 18156 bytes --]
root@nfv-dpdk:/opt/stack/ovs/vswitchd# ./ovs-vswitchd --dpdk -c 0x0FF8 -n 4 --socket-mem 1024,0 -- --log-file=/var/log/openvswitch/ovs-vswitchd.log --pidfile=/var/run/op\rpenvswitch/ovs-vswitchd.pid
\r\rroot@nfv-dpdk:/opt/stack/ovs/vswitchd# killall ovs-vswitchd
ovs-vswitchd: no process found
root@nfv-dpdk:/opt/stack/ovs/vswitchd#./ovs-vswitchd --dpdk -c 0x0FF8 -n 4 --socket-mem 1024,0 -- --log-file=/var/log/openvswitch/ovs-vswitchd.log --pidfile=/var/run/op\rpenvswitch/ovs-vswitchd.pid
2015-11-24T13:14:09Z|00001|dpdk|INFO|No -vhost_sock_dir provided - defaulting to /var/run/openvswitch
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 8 on socket 0
EAL: Detected lcore 7 as core 9 on socket 0
EAL: Detected lcore 8 as core 10 on socket 0
EAL: Detected lcore 9 as core 11 on socket 0
EAL: Detected lcore 10 as core 12 on socket 0
EAL: Detected lcore 11 as core 13 on socket 0
EAL: Detected lcore 12 as core 0 on socket 1
EAL: Detected lcore 13 as core 1 on socket 1
EAL: Detected lcore 14 as core 2 on socket 1
EAL: Detected lcore 15 as core 3 on socket 1
EAL: Detected lcore 16 as core 4 on socket 1
EAL: Detected lcore 17 as core 5 on socket 1
EAL: Detected lcore 18 as core 8 on socket 1
EAL: Detected lcore 19 as core 9 on socket 1
EAL: Detected lcore 20 as core 10 on socket 1
EAL: Detected lcore 21 as core 11 on socket 1
EAL: Detected lcore 22 as core 12 on socket 1
EAL: Detected lcore 23 as core 13 on socket 1
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 1 on socket 0
EAL: Detected lcore 26 as core 2 on socket 0
EAL: Detected lcore 27 as core 3 on socket 0
EAL: Detected lcore 28 as core 4 on socket 0
EAL: Detected lcore 29 as core 5 on socket 0
EAL: Detected lcore 30 as core 8 on socket 0
EAL: Detected lcore 31 as core 9 on socket 0
EAL: Detected lcore 32 as core 10 on socket 0
EAL: Detected lcore 33 as core 11 on socket 0
EAL: Detected lcore 34 as core 12 on socket 0
EAL: Detected lcore 35 as core 13 on socket 0
EAL: Detected lcore 36 as core 0 on socket 1
EAL: Detected lcore 37 as core 1 on socket 1
EAL: Detected lcore 38 as core 2 on socket 1
EAL: Detected lcore 39 as core 3 on socket 1
EAL: Detected lcore 40 as core 4 on socket 1
EAL: Detected lcore 41 as core 5 on socket 1
EAL: Detected lcore 42 as core 8 on socket 1
EAL: Detected lcore 43 as core 9 on socket 1
EAL: Detected lcore 44 as core 10 on socket 1
EAL: Detected lcore 45 as core 11 on socket 1
EAL: Detected lcore 46 as core 12 on socket 1
EAL: Detected lcore 47 as core 13 on socket 1
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 48 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Searching for IVSHMEM devices...
EAL: No IVSHMEM configuration found!
EAL: Setting up memory...
EAL: Ask a virtual area of 0x8a00000 bytes
EAL: Virtual area found at 0x7f2cf6800000 (size = 0x8a00000)
EAL: Ask a virtual area of 0x4800000 bytes
EAL: Virtual area found at 0x7f2d1ba00000 (size = 0x4800000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d1b600000 (size = 0x200000)
EAL: Ask a virtual area of 0x7800000 bytes
EAL: Virtual area found at 0x7f2d13c00000 (size = 0x7800000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d13800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d13400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d13000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d12c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x800000 bytes
EAL: Virtual area found at 0x7f2cf5e00000 (size = 0x800000)
EAL: Ask a virtual area of 0x8800000 bytes
EAL: Virtual area found at 0x7f2ced400000 (size = 0x8800000)
EAL: Ask a virtual area of 0x6400000 bytes
EAL: Virtual area found at 0x7f2d0c600000 (size = 0x6400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0c200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0be00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0ba00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0b600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0b200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0ae00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0aa00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0a600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d0a200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d09e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d09a00000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2d09400000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d09000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d08c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d08800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d08400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d08000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d07c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d07800000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2d07200000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d06e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d06a00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ced000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d06600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cecc00000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2cec600000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d06200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d05e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d05a00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cec200000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2cebc00000 (size = 0x400000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2d05400000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d05000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d04c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2ceb600000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d04800000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2ceb000000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d04400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d04000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d03c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ceac00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d03800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cea800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d03400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cea400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d03000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cea000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d02c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce9c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d02800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce9800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d02400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce9400000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2ce8e00000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d02000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d01c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d01800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce8a00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d01400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce8600000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2ce8000000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d01000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d00c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d00800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce7c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d00400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce7800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d00000000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2ce7200000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cffc00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce6e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cff800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce6a00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce6600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce6200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2cff400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce5e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce5a00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce5600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2ce5200000 (size = 0x200000)
EAL: Ask a virtual area of 0x14800000 bytes
EAL: Virtual area found at 0x7f2cd0800000 (size = 0x14800000)
EAL: Ask a virtual area of 0x800000 bytes
EAL: Virtual area found at 0x7f2ccfe00000 (size = 0x800000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2ccf800000 (size = 0x400000)
EAL: Ask a virtual area of 0xc00000 bytes
EAL: Virtual area found at 0x7f2ccea00000 (size = 0xc00000)
EAL: Ask a virtual area of 0x800000 bytes
EAL: Virtual area found at 0x7f2cce000000 (size = 0x800000)
EAL: Ask a virtual area of 0x17a00000 bytes
EAL: Virtual area found at 0x7f2cb6400000 (size = 0x17a00000)
EAL: Ask a virtual area of 0x42200000 bytes
EAL: Virtual area found at 0x7f2c74000000 (size = 0x42200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2c73c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x11800000 bytes
EAL: Virtual area found at 0x7f2c62200000 (size = 0x11800000)
EAL: Ask a virtual area of 0x4800000 bytes
EAL: Virtual area found at 0x7f2c5d800000 (size = 0x4800000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2c5d200000 (size = 0x400000)
EAL: Ask a virtual area of 0x9200000 bytes
EAL: Virtual area found at 0x7f2c53e00000 (size = 0x9200000)
EAL: Ask a virtual area of 0x1800000 bytes
EAL: Virtual area found at 0x7f2c52400000 (size = 0x1800000)
EAL: Ask a virtual area of 0x1ee00000 bytes
EAL: Virtual area found at 0x7f2c33400000 (size = 0x1ee00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2c33000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2c32c00000 (size = 0x200000)
EAL: Ask a virtual area of 0xa800000 bytes
EAL: Virtual area found at 0x7f2c28200000 (size = 0xa800000)
EAL: Ask a virtual area of 0x15200000 bytes
EAL: Virtual area found at 0x7f2c12e00000 (size = 0x15200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2c12800000 (size = 0x400000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: TSC frequency is ~2596991 KHz
EAL: Master lcore 3 is ready (tid=21ffa700;cpuset=[3])
PMD: ENICPMD trace: rte_enic_pmd_init
EAL: lcore 5 is ready (tid=e49fe700;cpuset=[5])
EAL: lcore 4 is ready (tid=e51ff700;cpuset=[4])
EAL: lcore 9 is ready (tid=e29fa700;cpuset=[9])
EAL: lcore 6 is ready (tid=e41fd700;cpuset=[6])
EAL: lcore 10 is ready (tid=e21f9700;cpuset=[10])
EAL: lcore 7 is ready (tid=e39fc700;cpuset=[7])
EAL: lcore 11 is ready (tid=e19f8700;cpuset=[11])
EAL: lcore 8 is ready (tid=e31fb700;cpuset=[8])
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: Not managed by a supported kernel driver, skipped
EAL: PCI device 0000:04:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: Not managed by a supported kernel driver, skipped
Zone 0: name:<MALLOC_S0_HEAP_0>, phys:0x30400000, len:0xb00000, virt:0x7f2d1ba00000, socket_id:0, flags:0
Zone 1: name:<RG_MP_log_history>, phys:0x35400000, len:0x2080, virt:0x7f2d1b600000, socket_id:0, flags:0
Zone 2: name:<MP_log_history>, phys:0xe3ce00000, len:0x28a0c0, virt:0x7f2d09400000, socket_id:0, flags:0
2015-11-24T13:14:12Z|00002|vlog|INFO|opened log file /var/log/openvswitch/ovs-vswitchd.log
2015-11-24T13:14:12Z|00003|ovs_numa|INFO|Discovered 24 CPU cores on NUMA node 0
2015-11-24T13:14:12Z|00004|ovs_numa|INFO|Discovered 24 CPU cores on NUMA node 1
2015-11-24T13:14:12Z|00005|ovs_numa|INFO|Discovered 2 NUMA nodes and 48 CPU cores
2015-11-24T13:14:12Z|00006|reconnect|INFO|unix:/var/run/openvswitch/db.sock: connecting...
2015-11-24T13:14:12Z|00007|reconnect|INFO|unix:/var/run/openvswitch/db.sock: connected
2015-11-24T13:14:12Z|00008|ofproto_dpif|INFO|netdev@ovs-netdev: Datapath supports recirculation
2015-11-24T13:14:12Z|00009|ofproto_dpif|INFO|netdev@ovs-netdev: MPLS label stack length probed as 3
2015-11-24T13:14:12Z|00010|ofproto_dpif|INFO|netdev@ovs-netdev: Datapath supports unique flow ids
2015-11-24T13:14:12Z|00011|dpif_netlink|ERR|Generic Netlink family 'ovs_datapath' does not exist. The Open vSwitch kernel module is probably not loaded.
2015-11-24T13:14:12Z|00012|dpif|WARN|failed to enumerate system datapaths: No such file or directory
2015-11-24T13:14:12Z|00013|dpif|WARN|failed to create datapath ovs-system: No such file or directory
2015-11-24T13:14:12Z|00014|ofproto_dpif|ERR|failed to open datapath of type system: No such file or directory
2015-11-24T13:14:12Z|00015|ofproto|ERR|failed to open datapath br-eth1: No such file or directory
2015-11-24T13:14:12Z|00016|bridge|ERR|failed to create bridge br-eth1: No such file or directory
2015-11-24T13:14:12Z|00017|bridge|INFO|bridge br-ex: added interface br-ex on port 65534
2015-11-24T13:14:12Z|00018|bridge|INFO|bridge br-int: added interface tapb6327a6f-e3 on port 1
2015-11-24T13:14:12Z|00019|bridge|INFO|bridge br-int: added interface br-int on port 65534
2015-11-24T13:14:12Z|00020|bridge|INFO|bridge br-ex: using datapath ID 0000be3137b62448
2015-11-24T13:14:12Z|00021|connmgr|INFO|br-ex: added service controller "punix:/var/run/openvswitch/br-ex.mgmt"
2015-11-24T13:14:12Z|00022|bridge|INFO|bridge br-int: using datapath ID 000016d2ab534949
2015-11-24T13:14:12Z|00023|connmgr|INFO|br-int: added service controller "punix:/var/run/openvswitch/br-int.mgmt"
2015-11-24T13:14:12Z|00024|bridge|INFO|ovs-vswitchd (Open vSwitch) 2.4.90
2015-11-24T13:14:19Z|00025|memory|INFO|25200 kB peak resident set size after 10.3 seconds
2015-11-24T13:14:19Z|00026|memory|INFO|handlers:17 ports:3 revalidators:7 rules:9
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04
2015-12-01 6:13 [dpdk-dev] DPDK OVS on Ubuntu 14.04 Abhijeet Karve
@ 2015-12-01 14:46 ` Polehn, Mike A
2015-12-02 14:52 ` Gray, Mark D
0 siblings, 1 reply; 13+ messages in thread
From: Polehn, Mike A @ 2015-12-01 14:46 UTC (permalink / raw)
To: Abhijeet Karve, dev; +Cc: bhavya.addep
May need to setup huge pages on kernel boot line (this is example, you may need to adjust):
The huge page configuration can be added to the default configuration file /etc/default/grub by adding to the GRUB_CMDLINE_LINUX and the grub configuration file regenerated to get an updated configuration file for Linux boot.
# vim /etc/default/grub // edit file
. . .
GRUB_CMDLINE_LINUX_DEFAULT="... default_hugepagesz=1GB hugepagesz=1GB hugepages=4 hugepagesize=2m hugepages=2048 ..."
. . .
This example sets up huge pages for both 1 GB pages for 4 GB of 1 GB hugepage memory and 2 MB pages for 4 GB of 2 MB hugepage memory. After boot the number of 1 GB pages cannot be changed, but the number of 2 MB pages can be changed.
After editing configuration file /etc/default/grub , the new grub.cfg boot file needs to be regenerated:
# update-grub
And reboot. After reboot memory managers need to be setup:
If /dev/hugepages does not exist: # mkdir /dev/hugepages
# mount -t hugetlbfs nodev /dev/hugepages
# mkdir /dev/hugepages_2mb
# mount -t hugetlbfs nodev /dev/hugepages_2mb -o pagesize=2MB
Mike
-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
Sent: Monday, November 30, 2015 10:14 PM
To: dev@dpdk.org
Cc: bhavya.addep@gmail.com
Subject: [dpdk-dev] DPDK OVS on Ubuntu 14.04
Dear All,
We are trying to install DPDK OVS on top of the openstack juno in Ubuntu
14.04 single server. We are referring following steps for executing the same.
https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
During execution we are getting some issues with ovs-vswitchd service as its getting hang during starting.
_________________________________________________________________________
nfv-dpdk@nfv-dpdk:~$ tail -f /var/log/openvswitch/ovs-vswitchd.log
2015-11-24T10:54:34.036Z|00006|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connecting...
2015-11-24T10:54:34.036Z|00007|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connected
2015-11-24T10:54:34.064Z|00008|bridge|INFO|ovs-vswitchd (Open vSwitch)
2.4.90
2015-11-24T11:03:42.957Z|00002|vlog|INFO|opened log file
/var/log/openvswitch/ov
s-vswitchd.log 2015-11-24T11:03:42.958Z|00003|ovs_numa|INFO|Discovered 24 CPU cores on NUMA
nod
e 0
2015-11-24T11:03:42.958Z|00004|ovs_numa|INFO|Discovered 24 CPU cores on NUMA
nod
e 1
2015-11-24T11:03:42.958Z|00005|ovs_numa|INFO|Discovered 2 NUMA nodes and
48 CPU
cores
2015-11-24T11:03:42.958Z|00006|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connecting...
2015-11-24T11:03:42.958Z|00007|reconnect|INFO|unix:/var/run/openvswitch/db.sock:
connected
2015-11-24T11:03:42.961Z|00008|bridge|INFO|ovs-vswitchd (Open vSwitch)
2.4.90
_________________________________________________________________________
Also, attaching output(Hugepage.txt) of “ ./ovs-vswitchd --dpdk -c 0x0FF8 -n 4 --socket-mem 1024,0 -- --log-file=/var/log/openvswitch/ovs-vswitchd.log
--pidfile=/var/run/oppenvswitch/ovs-vswitchd.pid”
- We tried seting up echo 0 >
/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages, but couldn’t succeeded.
Can anyone please help us in getting the things if we are missing any and causing ovs-vswitchd to stuck while starting?
Also, when we create vm in openstack with DPDK OVS, dpdkvhost-user type interfaces are getting created automatically. If this interfaces are getting mapped with regular br-int bridge rather than DPDK bridge br0 then is this mean that we have successfully enabled DPDK with netdev datapath?
We really appreciate for all the advice if you have.
Thanks,
Abhijeet
Thanks & Regards
Abhijeet Karve
=====-----=====-----=====
Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04
2015-12-01 14:46 ` Polehn, Mike A
@ 2015-12-02 14:52 ` Gray, Mark D
2015-12-15 5:55 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser Abhijeet Karve
0 siblings, 1 reply; 13+ messages in thread
From: Gray, Mark D @ 2015-12-02 14:52 UTC (permalink / raw)
To: Polehn, Mike A, Abhijeet Karve, dev; +Cc: bhavya.addep, discuss
+ discuss@openvswitch.org
one comment below:
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Polehn, Mike A
> Sent: Tuesday, December 1, 2015 2:46 PM
> To: Abhijeet Karve; dev@dpdk.org
> Cc: bhavya.addep@gmail.com
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04
>
> May need to setup huge pages on kernel boot line (this is example, you may
> need to adjust):
>
> The huge page configuration can be added to the default configuration file
> /etc/default/grub by adding to the GRUB_CMDLINE_LINUX and the grub
> configuration file regenerated to get an updated configuration file for Linux
> boot.
> # vim /etc/default/grub // edit file
>
> . . .
> GRUB_CMDLINE_LINUX_DEFAULT="... default_hugepagesz=1GB
> hugepagesz=1GB hugepages=4 hugepagesize=2m hugepages=2048 ..."
> . . .
>
>
> This example sets up huge pages for both 1 GB pages for 4 GB of 1 GB
> hugepage memory and 2 MB pages for 4 GB of 2 MB hugepage memory.
> After boot the number of 1 GB pages cannot be changed, but the number of
> 2 MB pages can be changed.
>
> After editing configuration file /etc/default/grub , the new grub.cfg boot file
> needs to be regenerated:
> # update-grub
>
> And reboot. After reboot memory managers need to be setup:
>
> If /dev/hugepages does not exist: # mkdir /dev/hugepages
>
> # mount -t hugetlbfs nodev /dev/hugepages
>
> # mkdir /dev/hugepages_2mb
> # mount -t hugetlbfs nodev /dev/hugepages_2mb -o pagesize=2MB
>
> Mike
>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Monday, November 30, 2015 10:14 PM
> To: dev@dpdk.org
> Cc: bhavya.addep@gmail.com
> Subject: [dpdk-dev] DPDK OVS on Ubuntu 14.04
>
> Dear All,
>
>
> We are trying to install DPDK OVS on top of the openstack juno in Ubuntu
> 14.04 single server. We are referring following steps for executing the same.
>
> https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-
> ovs-today-using-dpdk-200
>
> During execution we are getting some issues with ovs-vswitchd service as its
> getting hang during starting.
> __________________________________________________________
> _______________
>
> nfv-dpdk@nfv-dpdk:~$ tail -f /var/log/openvswitch/ovs-vswitchd.log
> 2015-11-
> 24T10:54:34.036Z|00006|reconnect|INFO|unix:/var/run/openvswitch/db.so
> ck:
> connecting...
> 2015-11-
> 24T10:54:34.036Z|00007|reconnect|INFO|unix:/var/run/openvswitch/db.so
> ck:
> connected
> 2015-11-24T10:54:34.064Z|00008|bridge|INFO|ovs-vswitchd (Open vSwitch)
> 2.4.90
> 2015-11-24T11:03:42.957Z|00002|vlog|INFO|opened log file
> /var/log/openvswitch/ov
> s-vswitchd.log 2015-11-
> 24T11:03:42.958Z|00003|ovs_numa|INFO|Discovered 24 CPU cores on
> NUMA
> nod
> e 0
> 2015-11-24T11:03:42.958Z|00004|ovs_numa|INFO|Discovered 24 CPU cores
> on NUMA
> nod
> e 1
> 2015-11-24T11:03:42.958Z|00005|ovs_numa|INFO|Discovered 2 NUMA
> nodes and
> 48 CPU
> cores
> 2015-11-
> 24T11:03:42.958Z|00006|reconnect|INFO|unix:/var/run/openvswitch/db.so
> ck:
> connecting...
> 2015-11-
> 24T11:03:42.958Z|00007|reconnect|INFO|unix:/var/run/openvswitch/db.so
> ck:
> connected
> 2015-11-24T11:03:42.961Z|00008|bridge|INFO|ovs-vswitchd (Open vSwitch)
> 2.4.90
> __________________________________________________________
> _______________
>
> Also, attaching output(Hugepage.txt) of “ ./ovs-vswitchd --dpdk -c 0x0FF8 -n
> 4 --socket-mem 1024,0 -- --log-file=/var/log/openvswitch/ovs-vswitchd.log
> --pidfile=/var/run/oppenvswitch/ovs-vswitchd.pid”
>
> - We tried seting up echo 0 >
> /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages, but couldn’t
> succeeded.
> Can anyone please help us in getting the things if we are missing any and
> causing ovs-vswitchd to stuck while starting?
>
> Also, when we create vm in openstack with DPDK OVS, dpdkvhost-user type
> interfaces are getting created automatically. If this interfaces are getting
> mapped with regular br-int bridge rather than DPDK bridge br0 then is this
You can still have a bridge named br-int that is backed with a userspace datapath. You can't add
a dpdkvhostuser port to a kernel space datapath. So in this case, I think you are ok and are
using DPDK.
> mean that we have successfully enabled DPDK with netdev datapath?
>
>
>
> We really appreciate for all the advice if you have.
>
> Thanks,
> Abhijeet
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If you
> are not the intended recipient, any dissemination, use, review, distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received this
> communication in error, please notify us by reply e-mail or telephone and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
2015-12-02 14:52 ` Gray, Mark D
@ 2015-12-15 5:55 ` Abhijeet Karve
2015-12-15 15:42 ` Czesnowicz, Przemyslaw
0 siblings, 1 reply; 13+ messages in thread
From: Abhijeet Karve @ 2015-12-15 5:55 UTC (permalink / raw)
To: Gray, Mark D; +Cc: dev, discuss
Dear All,
After seting up system boot parameters as shown below, the issue is
resolved now & we are able to successfully setup openvswitch netdev-dpdk
with vhostuser support.
_________________________________________________________________________________________________________________
Setup 2 sets of huge pages with different sizes. One for Vhost and another
for Guest VM.
Edit /etc/default/grub.
GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
hugepages=10 hugepagesz=2M hugepages=4096"
# update-grub
- Mount the huge pages into different directory.
# sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
# sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
_________________________________________________________________________________________________________________
At present we are facing an issue in Testing DPDK application on setup. In
our scenario, We have DPDK instance launched on top of the Openstack Kilo
compute node. Not able to assign DHCP IP from controller.
Thanks & Regards
Abhijeet Karve
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
2015-12-15 5:55 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser Abhijeet Karve
@ 2015-12-15 15:42 ` Czesnowicz, Przemyslaw
2015-12-16 9:36 ` Abhijeet Karve
0 siblings, 1 reply; 13+ messages in thread
From: Czesnowicz, Przemyslaw @ 2015-12-15 15:42 UTC (permalink / raw)
To: Abhijeet Karve, Gray, Mark D; +Cc: dev, discuss
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org; discuss@openvswitch.org
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup. In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If you
> are not the intended recipient, any dissemination, use, review, distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received this
> communication in error, please notify us by reply e-mail or telephone and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
2015-12-15 15:42 ` Czesnowicz, Przemyslaw
@ 2015-12-16 9:36 ` Abhijeet Karve
2015-12-17 11:57 ` Czesnowicz, Przemyslaw
0 siblings, 1 reply; 13+ messages in thread
From: Abhijeet Karve @ 2015-12-16 9:36 UTC (permalink / raw)
To: Czesnowicz, Przemyslaw; +Cc: dev, discuss
Hi Przemek,
We have configured the accelerated data path between a physical interface
to the VM using openvswitch netdev-dpdk with vhost-user support. The VM
created with this special data path and vhost library, I am calling as
DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are
able to make 2 VM's to communicate on the same compute node. Else it's not
associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following
software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide
https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534,
priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534,
priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c
actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x57
actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1
actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912,
idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition)
if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>, "Gray, Mark D"
<mark.d.gray@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org"
<discuss@openvswitch.org>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm
assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org; discuss@openvswitch.org
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and
another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup.
In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If
you
> are not the intended recipient, any dissemination, use, review,
distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received
this
> communication in error, please notify us by reply e-mail or telephone
and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
2015-12-16 9:36 ` Abhijeet Karve
@ 2015-12-17 11:57 ` Czesnowicz, Przemyslaw
2015-12-17 12:40 ` Abhijeet Karve
0 siblings, 1 reply; 13+ messages in thread
From: Czesnowicz, Przemyslaw @ 2015-12-17 11:57 UTC (permalink / raw)
To: Abhijeet Karve; +Cc: dev, discuss
HI Abhijeet,
For Kilo you need to use ovsdpdk mechanism driver and a matching agent to integrate ovs-dpdk with OpenStack.
The guide you are following only talks about running ovs-dpdk not how it should be integrated with OpenStack.
Please follow this guide:
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
Best regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Wednesday, December 16, 2015 9:37 AM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
Hi Przemek,
We have configured the accelerated data path between a physical interface to the VM using openvswitch netdev-dpdk with vhost-user support. The VM created with this special data path and vhost library, I am calling as DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are able to make 2 VM's to communicate on the same compute node. Else it's not associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x57 actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1 actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912, idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition) if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup. In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If you
> are not the intended recipient, any dissemination, use, review, distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received this
> communication in error, please notify us by reply e-mail or telephone and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
2015-12-17 11:57 ` Czesnowicz, Przemyslaw
@ 2015-12-17 12:40 ` Abhijeet Karve
2015-12-17 13:01 ` Czesnowicz, Przemyslaw
0 siblings, 1 reply; 13+ messages in thread
From: Abhijeet Karve @ 2015-12-17 12:40 UTC (permalink / raw)
To: Czesnowicz, Przemyslaw; +Cc: dev, discuss
Hi Przemek,
Thank you so much for sharing the ref guide.
Would be appreciate if clear one doubt.
At present we are setting up openstack kilo interactively and further
replacing ovs with ovs-dpdk enabled.
Once the above setup done, We are creating instance in openstack and
passing that instance id to QEMU command line which further passes the
vhost-user sockets to instances, enabling the DPDK libraries in it.
Isn't this the correct way of integrating ovs-dpdk with openstack?
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org"
<discuss@openvswitch.org>, "Gray, Mark D" <mark.d.gray@intel.com>
Date: 12/17/2015 05:27 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
HI Abhijeet,
For Kilo you need to use ovsdpdk mechanism driver and a matching agent to
integrate ovs-dpdk with OpenStack.
The guide you are following only talks about running ovs-dpdk not how it
should be integrated with OpenStack.
Please follow this guide:
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
Best regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Wednesday, December 16, 2015 9:37 AM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Przemek,
We have configured the accelerated data path between a physical interface
to the VM using openvswitch netdev-dpdk with vhost-user support. The VM
created with this special data path and vhost library, I am calling as
DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are
able to make 2 VM's to communicate on the same compute node. Else it's not
associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following
software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide
https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534,
priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534,
priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c
actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x57
actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1
actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912,
idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition)
if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>, "Gray, Mark D" <
mark.d.gray@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org" <
discuss@openvswitch.org>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm
assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org; discuss@openvswitch.org
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and
another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup.
In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If
you
> are not the intended recipient, any dissemination, use, review,
distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received
this
> communication in error, please notify us by reply e-mail or telephone
and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
2015-12-17 12:40 ` Abhijeet Karve
@ 2015-12-17 13:01 ` Czesnowicz, Przemyslaw
2015-12-24 17:41 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing Abhijeet Karve
0 siblings, 1 reply; 13+ messages in thread
From: Czesnowicz, Przemyslaw @ 2015-12-17 13:01 UTC (permalink / raw)
To: Abhijeet Karve; +Cc: dev, discuss
I haven't tried that approach not sure if that would work, it seems clunky.
If you enable ovsdpdk ml2 mechanism driver and agent all of that (add ports to ovs with the right type, pass the sockets to qemu) would be done by OpenStack.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 17, 2015 12:41 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
Hi Przemek,
Thank you so much for sharing the ref guide.
Would be appreciate if clear one doubt.
At present we are setting up openstack kilo interactively and further replacing ovs with ovs-dpdk enabled.
Once the above setup done, We are creating instance in openstack and passing that instance id to QEMU command line which further passes the vhost-user sockets to instances, enabling the DPDK libraries in it.
Isn't this the correct way of integrating ovs-dpdk with openstack?
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Date: 12/17/2015 05:27 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
HI Abhijeet,
For Kilo you need to use ovsdpdk mechanism driver and a matching agent to integrate ovs-dpdk with OpenStack.
The guide you are following only talks about running ovs-dpdk not how it should be integrated with OpenStack.
Please follow this guide:
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
Best regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Wednesday, December 16, 2015 9:37 AM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
Hi Przemek,
We have configured the accelerated data path between a physical interface to the VM using openvswitch netdev-dpdk with vhost-user support. The VM created with this special data path and vhost library, I am calling as DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are able to make 2 VM's to communicate on the same compute node. Else it's not associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x57 actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1 actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912, idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition) if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup. In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If you
> are not the intended recipient, any dissemination, use, review, distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received this
> communication in error, please notify us by reply e-mail or telephone and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing
2015-12-17 13:01 ` Czesnowicz, Przemyslaw
@ 2015-12-24 17:41 ` Abhijeet Karve
2016-01-04 14:24 ` Czesnowicz, Przemyslaw
0 siblings, 1 reply; 13+ messages in thread
From: Abhijeet Karve @ 2015-12-24 17:41 UTC (permalink / raw)
To: Czesnowicz, Przemyslaw; +Cc: dev, discuss
Hi Przemek,
Thank you so much for your quick response.
The guide(
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
) which you have suggested that is for openstack vhost user installations
with devstack.
Can't we have any reference for including ovs-dpdk mechanisam driver for
openstack Ubuntu distribution which we are following for
compute+controller node setup?"
We are facing below listed issues With the current approach of setting up
openstack kilo interactively + replacing ovs with ovs-dpdk enabled and
Instance creation in openstack with
passing that instance id to QEMU command line which further passes the
vhost-user sockets to instances for enabling the DPDK libraries in it.
1. Created a flavor m1.hugepages which is backed by hugepage memory,
unable to spawn instance with this flavor – Getting a issue like: No
matching hugetlbfs for the number of hugepages assigned to the flavor.
2. Passing socket info to instances via qemu manually and instnaces
created are not persistent.
Now as you suggested, we are looking in enabling ovsdpdk ml2 mechanism
driver and agent all of that in our openstack ubuntu distribution.
Would be really appriciate if get any help or ref with explanation.
We are using compute + controller node setup and we are using following
software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
Thanks,
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org"
<discuss@openvswitch.org>, "Gray, Mark D" <mark.d.gray@intel.com>
Date: 12/17/2015 06:32 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
I haven’t tried that approach not sure if that would work, it seems
clunky.
If you enable ovsdpdk ml2 mechanism driver and agent all of that (add
ports to ovs with the right type, pass the sockets to qemu) would be done
by OpenStack.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 17, 2015 12:41 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Przemek,
Thank you so much for sharing the ref guide.
Would be appreciate if clear one doubt.
At present we are setting up openstack kilo interactively and further
replacing ovs with ovs-dpdk enabled.
Once the above setup done, We are creating instance in openstack and
passing that instance id to QEMU command line which further passes the
vhost-user sockets to instances, enabling the DPDK libraries in it.
Isn't this the correct way of integrating ovs-dpdk with openstack?
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org" <
discuss@openvswitch.org>, "Gray, Mark D" <mark.d.gray@intel.com>
Date: 12/17/2015 05:27 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
HI Abhijeet,
For Kilo you need to use ovsdpdk mechanism driver and a matching agent to
integrate ovs-dpdk with OpenStack.
The guide you are following only talks about running ovs-dpdk not how it
should be integrated with OpenStack.
Please follow this guide:
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
Best regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Wednesday, December 16, 2015 9:37 AM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Przemek,
We have configured the accelerated data path between a physical interface
to the VM using openvswitch netdev-dpdk with vhost-user support. The VM
created with this special data path and vhost library, I am calling as
DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are
able to make 2 VM's to communicate on the same compute node. Else it's not
associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following
software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide
https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534,
priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534,
priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c
actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x57
actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1
actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912,
idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition)
if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>, "Gray, Mark D" <
mark.d.gray@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org" <
discuss@openvswitch.org>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm
assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org; discuss@openvswitch.org
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and
another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup.
In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If
you
> are not the intended recipient, any dissemination, use, review,
distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received
this
> communication in error, please notify us by reply e-mail or telephone
and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing
2015-12-24 17:41 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing Abhijeet Karve
@ 2016-01-04 14:24 ` Czesnowicz, Przemyslaw
[not found] ` <OF7B9ED0F7.5B3B2C67-ON65257F45.0055D550-65257F45.005E9455@tcs.com>
0 siblings, 1 reply; 13+ messages in thread
From: Czesnowicz, Przemyslaw @ 2016-01-04 14:24 UTC (permalink / raw)
To: Abhijeet Karve; +Cc: dev, discuss
You should be able to clone networking-ovs-dpdk, switch to kilo branch, and run
python setup.py install
in the root of networking-ovs-dpdk, that should install agent and mech driver.
Then you would need to enable mech driver (ovsdpdk) on the controller in the /etc/neutron/plugins/ml2/ml2_conf.ini
And run the right agent on the computes (networking-ovs-dpdk-agent).
There should be pip packeges of networking-ovs-dpdk available shortly, I’ll let you know when that happens.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 24, 2015 6:42 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing
Hi Przemek,
Thank you so much for your quick response.
The guide(https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst) which you have suggested that is for openstack vhost user installations with devstack.
Can't we have any reference for including ovs-dpdk mechanisam driver for openstack Ubuntu distribution which we are following for
compute+controller node setup?"
We are facing below listed issues With the current approach of setting up openstack kilo interactively + replacing ovs with ovs-dpdk enabled and Instance creation in openstack with
passing that instance id to QEMU command line which further passes the vhost-user sockets to instances for enabling the DPDK libraries in it.
1. Created a flavor m1.hugepages which is backed by hugepage memory, unable to spawn instance with this flavor – Getting a issue like: No matching hugetlbfs for the number of hugepages assigned to the flavor.
2. Passing socket info to instances via qemu manually and instnaces created are not persistent.
Now as you suggested, we are looking in enabling ovsdpdk ml2 mechanism driver and agent all of that in our openstack ubuntu distribution.
Would be really appriciate if get any help or ref with explanation.
We are using compute + controller node setup and we are using following software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
Thanks,
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Date: 12/17/2015 06:32 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
I haven’t tried that approach not sure if that would work, it seems clunky.
If you enable ovsdpdk ml2 mechanism driver and agent all of that (add ports to ovs with the right type, pass the sockets to qemu) would be done by OpenStack.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 17, 2015 12:41 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
Hi Przemek,
Thank you so much for sharing the ref guide.
Would be appreciate if clear one doubt.
At present we are setting up openstack kilo interactively and further replacing ovs with ovs-dpdk enabled.
Once the above setup done, We are creating instance in openstack and passing that instance id to QEMU command line which further passes the vhost-user sockets to instances, enabling the DPDK libraries in it.
Isn't this the correct way of integrating ovs-dpdk with openstack?
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Date: 12/17/2015 05:27 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
HI Abhijeet,
For Kilo you need to use ovsdpdk mechanism driver and a matching agent to integrate ovs-dpdk with OpenStack.
The guide you are following only talks about running ovs-dpdk not how it should be integrated with OpenStack.
Please follow this guide:
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
Best regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Wednesday, December 16, 2015 9:37 AM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
Hi Przemek,
We have configured the accelerated data path between a physical interface to the VM using openvswitch netdev-dpdk with vhost-user support. The VM created with this special data path and vhost library, I am calling as DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are able to make 2 VM's to communicate on the same compute node. Else it's not associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x57 actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1 actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912, idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition) if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup. In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If you
> are not the intended recipient, any dissemination, use, review, distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received this
> communication in error, please notify us by reply e-mail or telephone and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Inter-VM communication & IP allocation through DHCP issue
[not found] ` <OF7B9ED0F7.5B3B2C67-ON65257F45.0055D550-65257F45.005E9455@tcs.com>
@ 2016-01-27 11:41 ` Czesnowicz, Przemyslaw
2016-01-27 16:22 ` Abhijeet Karve
0 siblings, 1 reply; 13+ messages in thread
From: Czesnowicz, Przemyslaw @ 2016-01-27 11:41 UTC (permalink / raw)
To: Abhijeet Karve; +Cc: dev, discuss
Hi Abhijeet,
It seems you are almost there!
When booting the VM’s do you request hugepage memory for them (by setting hw:mem_page_size=large in flavor extra_spec)?
If not then please do, if yes then please look into libvirt logfiles for the VM’s (in /var/log/libvirt/qemu/instance-xxx), I think there could be a clue.
Regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Monday, January 25, 2016 6:13 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Inter-VM communication & IP allocation through DHCP issue
Hi Przemek,
Thank you for your response, It really provided us breakthrough.
After setting up DPDK on compute node for stable/kilo, We are trying to set up Openstack stable/liberty all-in-one setup, At present we are not able to get the IP allocation for the vhost type instances through DHCP. Also we tried assigning IP's manually to them but the inter-VM communication also not happening,
#neutron agent-list
root@nfv-dpdk-devstack:/etc/neutron# neutron agent-list
+--------------------------------------+--------------------+-------------------+-------+----------------+---------------------------+
| id | agent_type | host | alive | admin_state_up | binary |
+--------------------------------------+--------------------+-------------------+-------+----------------+---------------------------+
| 3b29e93c-3a25-4f7d-bf6c-6bb309db5ec0 | DPDK OVS Agent | nfv-dpdk-devstack | :-) | True | neutron-openvswitch-agent |
| 62593b2c-c10f-4d93-8551-c46ce24895a6 | L3 agent | nfv-dpdk-devstack | :-) | True | neutron-l3-agent |
| 7cb97af9-cc20-41f8-90fb-aba97d39dfbd | DHCP agent | nfv-dpdk-devstack | :-) | True | neutron-dhcp-agent |
| b613c654-99b7-437e-9317-20fa651a1310 | Linux bridge agent | nfv-dpdk-devstack | :-) | True | neutron-linuxbridge-agent |
| c2dd0384-6517-4b44-9c25-0d2825d23f57 | Metadata agent | nfv-dpdk-devstack | :-) | True | neutron-metadata-agent |
| f23dde40-7dc0-4f20-8b3e-eb90ddb15e49 | Open vSwitch agent | nfv-dpdk-devstack | xxx | True | neutron-openvswitch-agent |
+--------------------------------------+--------------------+-------------------+-------+----------------+---------------------------+
ovs-vsctl show output#
--------------------------------------------------------
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Port phy-br-dpdk
Interface phy-br-dpdk
type: patch
options: {peer=int-br-dpdk}
Bridge br-int
fail_mode: secure
Port "vhufa41e799-f2"
tag: 5
Interface "vhufa41e799-f2"
type: dpdkvhostuser
Port int-br-dpdk
Interface int-br-dpdk
type: patch
options: {peer=phy-br-dpdk}
Port "tap4e19f8e1-59"
tag: 5
Interface "tap4e19f8e1-59"
type: internal
Port "vhu05734c49-3b"
tag: 5
Interface "vhu05734c49-3b"
type: dpdkvhostuser
Port "vhu10c06b4d-84"
tag: 5
Interface "vhu10c06b4d-84"
type: dpdkvhostuser
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port "vhue169c581-ef"
tag: 5
Interface "vhue169c581-ef"
type: dpdkvhostuser
Port br-int
Interface br-int
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
error: "could not open network device br-tun (Invalid argument)"
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
ovs_version: "2.4.0"
--------------------------------------------------------
ovs-ofctl dump-flows br-int#
--------------------------------------------------------
root@nfv-dpdk-devstack:/etc/neutron# ovs-ofctl dump-flows br-int
NXST_FLOW reply (xid=0x4):
cookie=0xaaa002bb2bcf827b, duration=2410.012s, table=0, n_packets=0, n_bytes=0, idle_age=2410, priority=10,icmp6,in_port=43,icmp_type=136 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2409.480s, table=0, n_packets=0, n_bytes=0, idle_age=2409, priority=10,icmp6,in_port=44,icmp_type=136 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.704s, table=0, n_packets=0, n_bytes=0, idle_age=2408, priority=10,icmp6,in_port=45,icmp_type=136 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.155s, table=0, n_packets=0, n_bytes=0, idle_age=2408, priority=10,icmp6,in_port=42,icmp_type=136 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2409.858s, table=0, n_packets=0, n_bytes=0, idle_age=2409, priority=10,arp,in_port=43 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2409.314s, table=0, n_packets=0, n_bytes=0, idle_age=2409, priority=10,arp,in_port=44 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.564s, table=0, n_packets=0, n_bytes=0, idle_age=2408, priority=10,arp,in_port=45 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.019s, table=0, n_packets=0, n_bytes=0, idle_age=2408, priority=10,arp,in_port=42 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2411.538s, table=0, n_packets=0, n_bytes=0, idle_age=2411, priority=3,in_port=1,dl_vlan=346 actions=mod_vlan_vid:5,NORMAL
cookie=0xaaa002bb2bcf827b, duration=2415.038s, table=0, n_packets=0, n_bytes=0, idle_age=2415, priority=2,in_port=1 actions=drop
cookie=0xaaa002bb2bcf827b, duration=2416.148s, table=0, n_packets=0, n_bytes=0, idle_age=2416, priority=0 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2416.059s, table=23, n_packets=0, n_bytes=0, idle_age=2416, priority=0 actions=drop
cookie=0xaaa002bb2bcf827b, duration=2410.101s, table=24, n_packets=0, n_bytes=0, idle_age=2410, priority=2,icmp6,in_port=43,icmp_type=136,nd_target=fe80::f816:3eff:fe81:da61 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2409.571s, table=24, n_packets=0, n_bytes=0, idle_age=2409, priority=2,icmp6,in_port=44,icmp_type=136,nd_target=fe80::f816:3eff:fe73:254 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.775s, table=24, n_packets=0, n_bytes=0, idle_age=2408, priority=2,icmp6,in_port=45,icmp_type=136,nd_target=fe80::f816:3eff:fe88:5cc actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.231s, table=24, n_packets=0, n_bytes=0, idle_age=2408, priority=2,icmp6,in_port=42,icmp_type=136,nd_target=fe80::f816:3eff:fe86:f5f7 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2409.930s, table=24, n_packets=0, n_bytes=0, idle_age=2409, priority=2,arp,in_port=43,arp_spa=20.20.20.14 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2409.389s, table=24, n_packets=0, n_bytes=0, idle_age=2409, priority=2,arp,in_port=44,arp_spa=20.20.20.16 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.633s, table=24, n_packets=0, n_bytes=0, idle_age=2408, priority=2,arp,in_port=45,arp_spa=20.20.20.17 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.085s, table=24, n_packets=0, n_bytes=0, idle_age=2408, priority=2,arp,in_port=42,arp_spa=20.20.20.13 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2415.974s, table=24, n_packets=0, n_bytes=0, idle_age=2415, priority=0 actions=drop
root@nfv-dpdk-devstack:/etc/neutron#
--------------------------------------------------------
Also attaching Neutron-server, nova-compute & nova-scheduler logs.
It will be really great for us if get any hint to overcome out of this Inter-VM & DHCP communication issue,
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Date: 01/04/2016 07:54 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing
________________________________
You should be able to clone networking-ovs-dpdk, switch to kilo branch, and run
python setup.py install
in the root of networking-ovs-dpdk, that should install agent and mech driver.
Then you would need to enable mech driver (ovsdpdk) on the controller in the /etc/neutron/plugins/ml2/ml2_conf.ini
And run the right agent on the computes (networking-ovs-dpdk-agent).
There should be pip packeges of networking-ovs-dpdk available shortly, I’ll let you know when that happens.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 24, 2015 6:42 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing
Hi Przemek,
Thank you so much for your quick response.
The guide(https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst) which you have suggested that is for openstack vhost user installations with devstack.
Can't we have any reference for including ovs-dpdk mechanisam driver for openstack Ubuntu distribution which we are following for
compute+controller node setup?"
We are facing below listed issues With the current approach of setting up openstack kilo interactively + replacing ovs with ovs-dpdk enabled and Instance creation in openstack with
passing that instance id to QEMU command line which further passes the vhost-user sockets to instances for enabling the DPDK libraries in it.
1. Created a flavor m1.hugepages which is backed by hugepage memory, unable to spawn instance with this flavor – Getting a issue like: No matching hugetlbfs for the number of hugepages assigned to the flavor.
2. Passing socket info to instances via qemu manually and instnaces created are not persistent.
Now as you suggested, we are looking in enabling ovsdpdk ml2 mechanism driver and agent all of that in our openstack ubuntu distribution.
Would be really appriciate if get any help or ref with explanation.
We are using compute + controller node setup and we are using following software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
Thanks,
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Date: 12/17/2015 06:32 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
I haven’t tried that approach not sure if that would work, it seems clunky.
If you enable ovsdpdk ml2 mechanism driver and agent all of that (add ports to ovs with the right type, pass the sockets to qemu) would be done by OpenStack.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 17, 2015 12:41 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
Hi Przemek,
Thank you so much for sharing the ref guide.
Would be appreciate if clear one doubt.
At present we are setting up openstack kilo interactively and further replacing ovs with ovs-dpdk enabled.
Once the above setup done, We are creating instance in openstack and passing that instance id to QEMU command line which further passes the vhost-user sockets to instances, enabling the DPDK libraries in it.
Isn't this the correct way of integrating ovs-dpdk with openstack?
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Date: 12/17/2015 05:27 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
HI Abhijeet,
For Kilo you need to use ovsdpdk mechanism driver and a matching agent to integrate ovs-dpdk with OpenStack.
The guide you are following only talks about running ovs-dpdk not how it should be integrated with OpenStack.
Please follow this guide:
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
Best regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Wednesday, December 16, 2015 9:37 AM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
Hi Przemek,
We have configured the accelerated data path between a physical interface to the VM using openvswitch netdev-dpdk with vhost-user support. The VM created with this special data path and vhost library, I am calling as DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are able to make 2 VM's to communicate on the same compute node. Else it's not associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x57 actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1 actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912, idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition) if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com<mailto:przemyslaw.czesnowicz@intel.com>>
To: Abhijeet Karve <abhijeet.karve@tcs.com<mailto:abhijeet.karve@tcs.com>>, "Gray, Mark D" <mark.d.gray@intel.com<mailto:mark.d.gray@intel.com>>
Cc: "dev@dpdk.org<mailto:dev@dpdk.org>" <dev@dpdk.org<mailto:dev@dpdk.org>>, "discuss@openvswitch.org<mailto:discuss@openvswitch.org>" <discuss@openvswitch.org<mailto:discuss@openvswitch.org>>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser
________________________________
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org<mailto:dev@dpdk.org>; discuss@openvswitch.org<mailto:discuss@openvswitch.org>
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup. In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If you
> are not the intended recipient, any dissemination, use, review, distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received this
> communication in error, please notify us by reply e-mail or telephone and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Inter-VM communication & IP allocation through DHCP issue
2016-01-27 11:41 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Inter-VM communication & IP allocation through DHCP issue Czesnowicz, Przemyslaw
@ 2016-01-27 16:22 ` Abhijeet Karve
0 siblings, 0 replies; 13+ messages in thread
From: Abhijeet Karve @ 2016-01-27 16:22 UTC (permalink / raw)
To: Czesnowicz, Przemyslaw; +Cc: dev, discuss
Hi Przemek,
Thanks for the quick response. Now able to get the DHCP ip's for 2
vhostuser instances and able to ping each other. Isssue was a bug in
cirros 0.3.0 images which we were using in openstack after using 0.3.1
image as given in the URL(
https://www.redhat.com/archives/rhos-list/2013-August/msg00032.html), able
to get the IP's in vhostuser VM instances.
As per our understanding, Packet flow across DPDK datapath will be like
vhostuser ports are connected to the br-int bridge & same is being patched
to the br-dpdk bridge where in our physical network (NIC) is connected
with dpdk0 port.
So for testing the flow we have to connect that physical network(NIC) with
external packet generator (e.g - ixia, iperf) & run the testpmd
application in the vhostuser VM, right?
Does it required to add any flows/efforts in bridge configurations(either
br-int or br-dpdk)?
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org"
<discuss@openvswitch.org>, "Gray, Mark D" <mark.d.gray@intel.com>
Date: 01/27/2016 05:11 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Inter-VM communication & IP allocation through DHCP issue
Hi Abhijeet,
It seems you are almost there!
When booting the VM’s do you request hugepage memory for them (by setting
hw:mem_page_size=large in flavor extra_spec)?
If not then please do, if yes then please look into libvirt logfiles for
the VM’s (in /var/log/libvirt/qemu/instance-xxx), I think there could be a
clue.
Regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Monday, January 25, 2016 6:13 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Inter-VM communication & IP allocation through DHCP issue
Hi Przemek,
Thank you for your response, It really provided us breakthrough.
After setting up DPDK on compute node for stable/kilo, We are trying to
set up Openstack stable/liberty all-in-one setup, At present we are not
able to get the IP allocation for the vhost type instances through DHCP.
Also we tried assigning IP's manually to them but the inter-VM
communication also not happening,
#neutron agent-list
root@nfv-dpdk-devstack:/etc/neutron# neutron agent-list
+--------------------------------------+--------------------+-------------------+-------+----------------+---------------------------+
| id | agent_type | host |
alive | admin_state_up | binary |
+--------------------------------------+--------------------+-------------------+-------+----------------+---------------------------+
| 3b29e93c-3a25-4f7d-bf6c-6bb309db5ec0 | DPDK OVS Agent |
nfv-dpdk-devstack | :-) | True | neutron-openvswitch-agent |
| 62593b2c-c10f-4d93-8551-c46ce24895a6 | L3 agent |
nfv-dpdk-devstack | :-) | True | neutron-l3-agent |
| 7cb97af9-cc20-41f8-90fb-aba97d39dfbd | DHCP agent |
nfv-dpdk-devstack | :-) | True | neutron-dhcp-agent |
| b613c654-99b7-437e-9317-20fa651a1310 | Linux bridge agent |
nfv-dpdk-devstack | :-) | True | neutron-linuxbridge-agent |
| c2dd0384-6517-4b44-9c25-0d2825d23f57 | Metadata agent |
nfv-dpdk-devstack | :-) | True | neutron-metadata-agent |
| f23dde40-7dc0-4f20-8b3e-eb90ddb15e49 | Open vSwitch agent |
nfv-dpdk-devstack | xxx | True | neutron-openvswitch-agent |
+--------------------------------------+--------------------+-------------------+-------+----------------+---------------------------+
ovs-vsctl show output#
--------------------------------------------------------
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Port phy-br-dpdk
Interface phy-br-dpdk
type: patch
options: {peer=int-br-dpdk}
Bridge br-int
fail_mode: secure
Port "vhufa41e799-f2"
tag: 5
Interface "vhufa41e799-f2"
type: dpdkvhostuser
Port int-br-dpdk
Interface int-br-dpdk
type: patch
options: {peer=phy-br-dpdk}
Port "tap4e19f8e1-59"
tag: 5
Interface "tap4e19f8e1-59"
type: internal
Port "vhu05734c49-3b"
tag: 5
Interface "vhu05734c49-3b"
type: dpdkvhostuser
Port "vhu10c06b4d-84"
tag: 5
Interface "vhu10c06b4d-84"
type: dpdkvhostuser
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port "vhue169c581-ef"
tag: 5
Interface "vhue169c581-ef"
type: dpdkvhostuser
Port br-int
Interface br-int
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
error: "could not open network device br-tun (Invalid
argument)"
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
ovs_version: "2.4.0"
--------------------------------------------------------
ovs-ofctl dump-flows br-int#
--------------------------------------------------------
root@nfv-dpdk-devstack:/etc/neutron# ovs-ofctl dump-flows br-int
NXST_FLOW reply (xid=0x4):
cookie=0xaaa002bb2bcf827b, duration=2410.012s, table=0, n_packets=0,
n_bytes=0, idle_age=2410, priority=10,icmp6,in_port=43,icmp_type=136
actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2409.480s, table=0, n_packets=0,
n_bytes=0, idle_age=2409, priority=10,icmp6,in_port=44,icmp_type=136
actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.704s, table=0, n_packets=0,
n_bytes=0, idle_age=2408, priority=10,icmp6,in_port=45,icmp_type=136
actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.155s, table=0, n_packets=0,
n_bytes=0, idle_age=2408, priority=10,icmp6,in_port=42,icmp_type=136
actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2409.858s, table=0, n_packets=0,
n_bytes=0, idle_age=2409, priority=10,arp,in_port=43 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2409.314s, table=0, n_packets=0,
n_bytes=0, idle_age=2409, priority=10,arp,in_port=44 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.564s, table=0, n_packets=0,
n_bytes=0, idle_age=2408, priority=10,arp,in_port=45 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2408.019s, table=0, n_packets=0,
n_bytes=0, idle_age=2408, priority=10,arp,in_port=42 actions=resubmit(,24)
cookie=0xaaa002bb2bcf827b, duration=2411.538s, table=0, n_packets=0,
n_bytes=0, idle_age=2411, priority=3,in_port=1,dl_vlan=346
actions=mod_vlan_vid:5,NORMAL
cookie=0xaaa002bb2bcf827b, duration=2415.038s, table=0, n_packets=0,
n_bytes=0, idle_age=2415, priority=2,in_port=1 actions=drop
cookie=0xaaa002bb2bcf827b, duration=2416.148s, table=0, n_packets=0,
n_bytes=0, idle_age=2416, priority=0 actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2416.059s, table=23, n_packets=0,
n_bytes=0, idle_age=2416, priority=0 actions=drop
cookie=0xaaa002bb2bcf827b, duration=2410.101s, table=24, n_packets=0,
n_bytes=0, idle_age=2410,
priority=2,icmp6,in_port=43,icmp_type=136,nd_target=fe80::f816:3eff:fe81:da61
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2409.571s, table=24, n_packets=0,
n_bytes=0, idle_age=2409,
priority=2,icmp6,in_port=44,icmp_type=136,nd_target=fe80::f816:3eff:fe73:254
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.775s, table=24, n_packets=0,
n_bytes=0, idle_age=2408,
priority=2,icmp6,in_port=45,icmp_type=136,nd_target=fe80::f816:3eff:fe88:5cc
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.231s, table=24, n_packets=0,
n_bytes=0, idle_age=2408,
priority=2,icmp6,in_port=42,icmp_type=136,nd_target=fe80::f816:3eff:fe86:f5f7
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2409.930s, table=24, n_packets=0,
n_bytes=0, idle_age=2409, priority=2,arp,in_port=43,arp_spa=20.20.20.14
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2409.389s, table=24, n_packets=0,
n_bytes=0, idle_age=2409, priority=2,arp,in_port=44,arp_spa=20.20.20.16
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.633s, table=24, n_packets=0,
n_bytes=0, idle_age=2408, priority=2,arp,in_port=45,arp_spa=20.20.20.17
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2408.085s, table=24, n_packets=0,
n_bytes=0, idle_age=2408, priority=2,arp,in_port=42,arp_spa=20.20.20.13
actions=NORMAL
cookie=0xaaa002bb2bcf827b, duration=2415.974s, table=24, n_packets=0,
n_bytes=0, idle_age=2415, priority=0 actions=drop
root@nfv-dpdk-devstack:/etc/neutron#
--------------------------------------------------------
Also attaching Neutron-server, nova-compute & nova-scheduler logs.
It will be really great for us if get any hint to overcome out of this
Inter-VM & DHCP communication issue,
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org" <
discuss@openvswitch.org>, "Gray, Mark D" <mark.d.gray@intel.com>
Date: 01/04/2016 07:54 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Getting memory backing issues with qemu parameter passing
You should be able to clone networking-ovs-dpdk, switch to kilo branch,
and run
python setup.py install
in the root of networking-ovs-dpdk, that should install agent and mech
driver.
Then you would need to enable mech driver (ovsdpdk) on the controller in
the /etc/neutron/plugins/ml2/ml2_conf.ini
And run the right agent on the computes (networking-ovs-dpdk-agent).
There should be pip packeges of networking-ovs-dpdk available shortly,
I’ll let you know when that happens.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 24, 2015 6:42 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Getting memory backing issues with qemu parameter passing
Hi Przemek,
Thank you so much for your quick response.
The guide(
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
) which you have suggested that is for openstack vhost user installations
with devstack.
Can't we have any reference for including ovs-dpdk mechanisam driver for
openstack Ubuntu distribution which we are following for
compute+controller node setup?"
We are facing below listed issues With the current approach of setting up
openstack kilo interactively + replacing ovs with ovs-dpdk enabled and
Instance creation in openstack with
passing that instance id to QEMU command line which further passes the
vhost-user sockets to instances for enabling the DPDK libraries in it.
1. Created a flavor m1.hugepages which is backed by hugepage memory,
unable to spawn instance with this flavor – Getting a issue like: No
matching hugetlbfs for the number of hugepages assigned to the flavor.
2. Passing socket info to instances via qemu manually and instnaces
created are not persistent.
Now as you suggested, we are looking in enabling ovsdpdk ml2 mechanism
driver and agent all of that in our openstack ubuntu distribution.
Would be really appriciate if get any help or ref with explanation.
We are using compute + controller node setup and we are using following
software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
Thanks,
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org" <
discuss@openvswitch.org>, "Gray, Mark D" <mark.d.gray@intel.com>
Date: 12/17/2015 06:32 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
I haven’t tried that approach not sure if that would work, it seems
clunky.
If you enable ovsdpdk ml2 mechanism driver and agent all of that (add
ports to ovs with the right type, pass the sockets to qemu) would be done
by OpenStack.
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Thursday, December 17, 2015 12:41 PM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Przemek,
Thank you so much for sharing the ref guide.
Would be appreciate if clear one doubt.
At present we are setting up openstack kilo interactively and further
replacing ovs with ovs-dpdk enabled.
Once the above setup done, We are creating instance in openstack and
passing that instance id to QEMU command line which further passes the
vhost-user sockets to instances, enabling the DPDK libraries in it.
Isn't this the correct way of integrating ovs-dpdk with openstack?
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org" <
discuss@openvswitch.org>, "Gray, Mark D" <mark.d.gray@intel.com>
Date: 12/17/2015 05:27 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
HI Abhijeet,
For Kilo you need to use ovsdpdk mechanism driver and a matching agent to
integrate ovs-dpdk with OpenStack.
The guide you are following only talks about running ovs-dpdk not how it
should be integrated with OpenStack.
Please follow this guide:
https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst
Best regards
Przemek
From: Abhijeet Karve [mailto:abhijeet.karve@tcs.com]
Sent: Wednesday, December 16, 2015 9:37 AM
To: Czesnowicz, Przemyslaw
Cc: dev@dpdk.org; discuss@openvswitch.org; Gray, Mark D
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Przemek,
We have configured the accelerated data path between a physical interface
to the VM using openvswitch netdev-dpdk with vhost-user support. The VM
created with this special data path and vhost library, I am calling as
DPDK instance.
If assigning ip manually to the newly created Cirros VM instance, We are
able to make 2 VM's to communicate on the same compute node. Else it's not
associating any ip through DHCP though DHCP is in compute node only.
Yes it's a compute + controller node setup and we are using following
software platform on compute node:
_____________
Openstack: Kilo
Distribution: Ubuntu 14.04
OVS Version: 2.4.0
DPDK 2.0.0
_____________
We are following the intel guide
https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200
When doing "ovs-vsctl show" in compute node, it shows below output:
_____________________________________________
ovs-vsctl show
c2ec29a5-992d-4875-8adc-1265c23e0304
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
fail_mode: secure
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvo0ae19a43-b6"
tag: 2
Interface "qvo0ae19a43-b6"
Port br-int
Interface br-int
type: internal
Port "qvo31c89856-a2"
tag: 1
Interface "qvo31c89856-a2"
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo97fef28a-ec"
tag: 2
Interface "qvo97fef28a-ec"
Bridge br-dpdk
Port br-dpdk
Interface br-dpdk
type: internal
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "vhost-user-2"
Interface "vhost-user-2"
type: dpdkvhostuser
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
ovs_version: "2.4.0"
root@dpdk:~#
_____________________________________________
Open flows output in bridge in compute node are as below:
_____________________________________________
root@dpdk:~# ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2)
cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534,
priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,20)
cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534,
priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,22)
cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c
actions=mod_vlan_vid:2,resubmit(,10)
cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1,tun_id=0x57
actions=mod_vlan_vid:1,resubmit(,10)
cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1
actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794,
idle_age=19982, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
root@dpdk:~#
root@dpdk:~#
root@dpdk:~# ovs-ofctl dump-flows br-tun
int NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop
cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912,
idle_age=19981, hard_age=65534, priority=1 actions=NORMAL
cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
root@dpdk:~#
_____________________________________________
Further we don't know what all the network changes(Packet Flow addition)
if required for associating IP address through the DHCP.
Would be really appreciate if have clarity on DHCP flow establishment.
Thanks & Regards
Abhijeet Karve
From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>
To: Abhijeet Karve <abhijeet.karve@tcs.com>, "Gray, Mark D" <
mark.d.gray@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "discuss@openvswitch.org" <
discuss@openvswitch.org>
Date: 12/15/2015 09:13 PM
Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
Successfully setup DPDK OVS with vhostuser
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm
assuming this is at least compute+ controller setup)
Best regards
Przemek
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Abhijeet Karve
> Sent: Tuesday, December 15, 2015 5:56 AM
> To: Gray, Mark D
> Cc: dev@dpdk.org; discuss@openvswitch.org
> Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved#
> Successfully setup DPDK OVS with vhostuser
>
> Dear All,
>
> After seting up system boot parameters as shown below, the issue is
> resolved now & we are able to successfully setup openvswitch netdev-dpdk
> with vhostuser support.
>
> __________________________________________________________
> _______________________________________________________
> Setup 2 sets of huge pages with different sizes. One for Vhost and
another
> for Guest VM.
> Edit /etc/default/grub.
> GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G
> hugepages=10 hugepagesz=2M hugepages=4096"
> # update-grub
> - Mount the huge pages into different directory.
> # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M
> # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G
> __________________________________________________________
> _______________________________________________________
>
> At present we are facing an issue in Testing DPDK application on setup.
In our
> scenario, We have DPDK instance launched on top of the Openstack Kilo
> compute node. Not able to assign DHCP IP from controller.
>
>
> Thanks & Regards
> Abhijeet Karve
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail message and/or
> attachments to it may contain confidential or privileged information. If
you
> are not the intended recipient, any dissemination, use, review,
distribution,
> printing or copying of the information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If you have received
this
> communication in error, please notify us by reply e-mail or telephone
and
> immediately and permanently delete the message and any attachments.
> Thank you
>
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-01-27 16:22 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-01 6:13 [dpdk-dev] DPDK OVS on Ubuntu 14.04 Abhijeet Karve
2015-12-01 14:46 ` Polehn, Mike A
2015-12-02 14:52 ` Gray, Mark D
2015-12-15 5:55 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser Abhijeet Karve
2015-12-15 15:42 ` Czesnowicz, Przemyslaw
2015-12-16 9:36 ` Abhijeet Karve
2015-12-17 11:57 ` Czesnowicz, Przemyslaw
2015-12-17 12:40 ` Abhijeet Karve
2015-12-17 13:01 ` Czesnowicz, Przemyslaw
2015-12-24 17:41 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing Abhijeet Karve
2016-01-04 14:24 ` Czesnowicz, Przemyslaw
[not found] ` <OF7B9ED0F7.5B3B2C67-ON65257F45.0055D550-65257F45.005E9455@tcs.com>
2016-01-27 11:41 ` [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Inter-VM communication & IP allocation through DHCP issue Czesnowicz, Przemyslaw
2016-01-27 16:22 ` Abhijeet Karve
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).