DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v4 00/11] A new net PMD - hinic
@ 2019-06-06 11:04 Ziyang Xuan
  2019-06-06 11:05 ` [dpdk-dev] [PATCH v4 05/11] net/hinic/base: add eqs and context code Ziyang Xuan
                   ` (10 more replies)
  0 siblings, 11 replies; 24+ messages in thread
From: Ziyang Xuan @ 2019-06-06 11:04 UTC (permalink / raw)
  To: dev
  Cc: ferruh.yigit, cloud.wangxiaoyun, zhouguoyang, shahar.belkar,
	stephen, luoxianjun, Ziyang Xuan

This patch set adds support of a new net PMD
for Huawei Intelligent nic. This patch provides supoort
for basic RX/TX and the contorl path needed for it.
Later on new features will be added like VLAN, VFs, etc.

Basic features:
1. Basic device operations: probe, initialization, start/stop,
   configure, info get.
2. RX/TX queue operations: setup/release, start/stop.
3. RX/TX.

Stats:
1. statistics and extended  statistics.

---
v2:
 - Fix arm64 compilation issue.
 - Fix some checkpatch checks issues
 - Fix patches thread issue.
 - Fit to the newest rte_ prefix patch

v3:
 - Remove Rami from hinic pmd maintainers
 - Remove hinic_logs.* files and move log codes to other files
 - Remove the C++ guards within hinic pmd codes
 - Remove variable related errors shields from compilation files
 - Use lib link statu related functions but selfdefined
 - Fix x86_64-native-linuxapp-clang compilation errors
 - Fix i686-native-linuxapp-gcc compilation errors

v4:
 - Update doc hinic.ini and hini.rst
 - Remove x86-32, i686, BSD, Power8, ARMv7 compilations
 - Fit to newest IPV4 and IPV6 uppercase

Ziyang Xuan (11):
  net/hinic/base: add registers for Huawei Hi1822 NIC
  net/hinic/base: add command channels code
  net/hinic/base: add mgmt module interactive code
  net/hinic/base: add code about hardware operation
  net/hinic/base: add eqs and context code
  net/hinic/base: add code for nic business
  net/hinic/base: add various headers
  net/hinic: add hinic PMD build and doc files
  net/hinic: add RX module
  net/hinic: add TX module
  net/hinic: add support for basic device operations

 MAINTAINERS                                   |    9 +
 config/common_base                            |    5 +
 config/common_linux                           |    5 +
 config/defconfig_arm-armv7a-linuxapp-gcc      |    1 +
 config/defconfig_i686-native-linuxapp-gcc     |    5 +
 config/defconfig_i686-native-linuxapp-icc     |    5 +
 config/defconfig_ppc_64-power8-linuxapp-gcc   |    1 +
 config/defconfig_x86_64-native-linuxapp-icc   |    5 +
 config/defconfig_x86_x32-native-linuxapp-gcc  |    5 +
 doc/guides/nics/features/hinic.ini            |   37 +
 doc/guides/nics/hinic.rst                     |   55 +
 drivers/net/Makefile                          |    1 +
 drivers/net/hinic/Makefile                    |   73 +
 drivers/net/hinic/base/hinic_compat.h         |  239 ++
 drivers/net/hinic/base/hinic_csr.h            |  164 ++
 drivers/net/hinic/base/hinic_ctx_def.h        |  184 ++
 drivers/net/hinic/base/hinic_pmd_api_cmd.c    | 1037 ++++++++
 drivers/net/hinic/base/hinic_pmd_api_cmd.h    |  271 +++
 drivers/net/hinic/base/hinic_pmd_cfg.c        |  269 +++
 drivers/net/hinic/base/hinic_pmd_cfg.h        |  264 ++
 drivers/net/hinic/base/hinic_pmd_cmdq.c       |  901 +++++++
 drivers/net/hinic/base/hinic_pmd_cmdq.h       |  190 ++
 drivers/net/hinic/base/hinic_pmd_dpdev.h      |  146 ++
 drivers/net/hinic/base/hinic_pmd_eqs.c        |  725 ++++++
 drivers/net/hinic/base/hinic_pmd_eqs.h        |   94 +
 drivers/net/hinic/base/hinic_pmd_hw.h         |   49 +
 drivers/net/hinic/base/hinic_pmd_hw_mgmt.h    |   85 +
 drivers/net/hinic/base/hinic_pmd_hwdev.c      | 1544 ++++++++++++
 drivers/net/hinic/base/hinic_pmd_hwdev.h      |  205 ++
 drivers/net/hinic/base/hinic_pmd_hwif.c       |  542 +++++
 drivers/net/hinic/base/hinic_pmd_hwif.h       |   90 +
 drivers/net/hinic/base/hinic_pmd_mgmt.c       |  617 +++++
 drivers/net/hinic/base/hinic_pmd_mgmt.h       |  125 +
 .../net/hinic/base/hinic_pmd_mgmt_interface.h |  503 ++++
 drivers/net/hinic/base/hinic_pmd_nic.h        |   85 +
 drivers/net/hinic/base/hinic_pmd_niccfg.c     | 1376 +++++++++++
 drivers/net/hinic/base/hinic_pmd_niccfg.h     |  333 +++
 drivers/net/hinic/base/hinic_pmd_nicio.c      |  919 +++++++
 drivers/net/hinic/base/hinic_pmd_nicio.h      |   53 +
 drivers/net/hinic/base/hinic_pmd_qp.c         |   26 +
 drivers/net/hinic/base/hinic_pmd_qp.h         |   76 +
 drivers/net/hinic/base/hinic_pmd_wq.c         |  164 ++
 drivers/net/hinic/base/hinic_pmd_wq.h         |   52 +
 drivers/net/hinic/base/hinic_port_cmd.h       |  483 ++++
 drivers/net/hinic/base/hinic_qe_def.h         |  450 ++++
 drivers/net/hinic/base/meson.build            |   50 +
 drivers/net/hinic/hinic_pmd_dpdev.c           |  702 ++++++
 drivers/net/hinic/hinic_pmd_ethdev.c          | 2150 +++++++++++++++++
 drivers/net/hinic/hinic_pmd_ethdev.h          |  102 +
 drivers/net/hinic/hinic_pmd_rx.c              |  902 +++++++
 drivers/net/hinic/hinic_pmd_rx.h              |  135 ++
 drivers/net/hinic/hinic_pmd_tx.c              | 1070 ++++++++
 drivers/net/hinic/hinic_pmd_tx.h              |   97 +
 drivers/net/hinic/meson.build                 |   18 +
 drivers/net/hinic/rte_pmd_hinic_version.map   |    4 +
 mk/rte.app.mk                                 |    1 +
 56 files changed, 17699 insertions(+)
 create mode 100644 doc/guides/nics/features/hinic.ini
 create mode 100644 doc/guides/nics/hinic.rst
 create mode 100644 drivers/net/hinic/Makefile
 create mode 100644 drivers/net/hinic/base/hinic_compat.h
 create mode 100644 drivers/net/hinic/base/hinic_csr.h
 create mode 100644 drivers/net/hinic/base/hinic_ctx_def.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_api_cmd.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_api_cmd.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_cfg.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_cfg.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_cmdq.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_cmdq.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_dpdev.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_eqs.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_eqs.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_hw.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_hw_mgmt.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_hwdev.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_hwdev.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_hwif.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_hwif.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_mgmt.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_mgmt.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_mgmt_interface.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_nic.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_niccfg.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_niccfg.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_nicio.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_nicio.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_qp.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_qp.h
 create mode 100644 drivers/net/hinic/base/hinic_pmd_wq.c
 create mode 100644 drivers/net/hinic/base/hinic_pmd_wq.h
 create mode 100644 drivers/net/hinic/base/hinic_port_cmd.h
 create mode 100644 drivers/net/hinic/base/hinic_qe_def.h
 create mode 100644 drivers/net/hinic/base/meson.build
 create mode 100644 drivers/net/hinic/hinic_pmd_dpdev.c
 create mode 100644 drivers/net/hinic/hinic_pmd_ethdev.c
 create mode 100644 drivers/net/hinic/hinic_pmd_ethdev.h
 create mode 100644 drivers/net/hinic/hinic_pmd_rx.c
 create mode 100644 drivers/net/hinic/hinic_pmd_rx.h
 create mode 100644 drivers/net/hinic/hinic_pmd_tx.c
 create mode 100644 drivers/net/hinic/hinic_pmd_tx.h
 create mode 100644 drivers/net/hinic/meson.build
 create mode 100644 drivers/net/hinic/rte_pmd_hinic_version.map

-- 
2.18.0


^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH v4 08/11] net/hinic: add hinic PMD build and doc files
@ 2019-06-12 15:00 Xuanziyang (William, Chip Application Design Logic and Hardware Development Dept IT_Products & Solutions)
  0 siblings, 0 replies; 24+ messages in thread
From: Xuanziyang (William, Chip Application Design Logic and Hardware Development Dept IT_Products & Solutions) @ 2019-06-12 15:00 UTC (permalink / raw)
  To: Ferruh Yigit, dev
  Cc: Wangxiaoyun (Cloud, Network Chip Application Development Dept),
	zhouguoyang, Shahar Belkar, stephen, Luoxianjun


> On 6/6/2019 12:06 PM, Ziyang Xuan wrote:
> > Add build and doc files, and common code files.
> >
> > Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
> > ---
> >  MAINTAINERS                                  |   9 +
> >  config/common_base                           |   5 +
> >  config/common_linux                          |   5 +
> >  config/defconfig_arm-armv7a-linuxapp-gcc     |   1 +
> >  config/defconfig_i686-native-linuxapp-gcc    |   5 +
> >  config/defconfig_i686-native-linuxapp-icc    |   5 +
> >  config/defconfig_ppc_64-power8-linuxapp-gcc  |   1 +
> >  config/defconfig_x86_64-native-linuxapp-icc  |   5 +
> >  config/defconfig_x86_x32-native-linuxapp-gcc |   5 +
> >  doc/guides/nics/features/hinic.ini           |  37 +
> >  doc/guides/nics/hinic.rst                    |  55 ++
> 
> Can you also update the release notes documentation
> (doc/guides/rel_notes/release_19_08.rst) to announce new driver?

OK, I will update the release note documentation at next version patchset.

> 
> <...>
> 
> > @@ -0,0 +1,55 @@
> > +..  SPDX-License-Identifier: BSD-3-Clause
> > +    Copyright(c) 2017 Huawei Technologies Co., Ltd
> > +
> > +
> > +HINIC Poll Mode Driver
> > +======================
> > +
> > +The hinic PMD (librte_pmd_hinic) provides poll mode driver support
> > +for
> > +25 Gbps Huawei Intelligent PCIE Network Adapters based on the Huawei
> > +Ethernet Controller Hi1822.
> 
> Can you please provide a link to product documentation?

OK, I will post the link of our product documentation in the hinic.rst at next patchset. 

> 
> > +
> > +
> > +Features
> > +--------
> > +
> > +- Multi arch support: x86_64, ARMv8.
> > +- Multiple queues for TX and RX
> > +- Receiver Side Scaling (RSS)
> > +- MAC/VLAN filtering
> > +- Checksum offload
> > +- TSO offload
> > +- Promiscuous mode
> > +- Port hardware statistics
> > +- Jumbo frames
> 
> Jumbo frame marked as not supported in above .ini file?

I will remove it here.

> 
> > +- Link state information
> > +- Link flow control
> > +- Scattered and gather for TX and RX
> > +
> > +Prerequisites
> > +-------------
> > +
> > +- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to
> setup the basic DPDK environment.
> > +
> > +Requires firmware 1.6.2.5
> 
> Please provide some link for this prerequisite.
> 
> <...>
> 
> > +#
> > +# Add extra flags for base driver files (also known as shared code) #
> > +to disable warnings # ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
> > +CFLAGS_BASE_DRIVER = -diag-disable 593 else CFLAGS_BASE_DRIVER  =
> > +-Wno-sign-compare CFLAGS_BASE_DRIVER += -Wno-unused-parameter
> > +CFLAGS_BASE_DRIVER += -Wno-strict-aliasing CFLAGS_BASE_DRIVER +=
> > +-Wno-missing-field-initializers CFLAGS_BASE_DRIVER +=
> > +-Wno-pointer-to-int-cast endif
> 
> Since icc is not supported (yet), can drop this part.

The part of icc can be delete. And I will delete the rest of compilation shield options by fix our codes.

> 
> > +
> > +OBJS_BASE_DRIVER=$(sort $(patsubst %.c,%.o,$(notdir $(wildcard
> > +$(SRCDIR)/base/*.c)))) $(foreach obj, $(OBJS_BASE_DRIVER), $(eval
> > +CFLAGS_$(obj)+=$(CFLAGS_BASE_DRIVER)))
> 
> And when icc part removed, I think nothing is left to set
> "CFLAGS_BASE_DRIVER", so this part can be removed too.
> 
> > +
> > +VPATH += $(SRCDIR)/base
> > +
> > +#
> > +# all source are stored in SRCS-y
> > +#
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_api_cmd.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_cfg.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_cmdq.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_eqs.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_hwdev.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_hwif.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_mgmt.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_niccfg.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_nicio.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_qp.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_wq.c
> > +
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_dpdev.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_ethdev.c
> > +#SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_rx.c
> > +#SRCS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic_pmd_tx.c
> 
> Please remove commented lines.

OK.

> 
> > +
> > +# this lib depends upon:
> > +DEPDIRS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += lib/librte_eal
> > +lib/librte_ether
> > +DEPDIRS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += lib/librte_mempool
> > +lib/librte_mbuf
> > +DEPDIRS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += lib/librte_net
> > +lib/librte_hash
> > +DEPDIRS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += lib/librte_kvargs
> > +DEPDIRS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += lib/librte_net
> > +DEPDIRS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += lib/librte_ring
> 
> We stop using DEPDIRS, below LDLIBS is replacing it, can drop above lines.

OK.

> 
> <...>
> 
> > +headers = [
> > +	'hinic_compat.h',
> > +	'hinic_csr.h',
> > +	'hinic_ctx_def.h',
> > +	'hinic_pmd_api_cmd.h',
> > +	'hinic_pmd_cfg.h',
> > +	'hinic_pmd_cmdq.h',
> > +	'hinic_pmd_dpdev.h',
> > +	'hinic_pmd_eqs.h',
> > +	'hinic_pmd_hwdev.h',
> > +	'hinic_pmd_hw.h',
> > +	'hinic_pmd_hwif.h',
> > +	'hinic_pmd_hw_mgmt.h',
> > +	'hinic_pmd_mgmt.h',
> > +	'hinic_pmd_mgmt_interface.h',
> > +	'hinic_pmd_niccfg.h',
> > +	'hinic_pmd_nic.h',
> > +	'hinic_pmd_nicio.h',
> > +	'hinic_pmd_qp.h',
> > +	'hinic_pmd_wq.h',
> > +	'hinic_port_cmd.h',
> > +	'hinic_qe_def.h',
> > +]
> 
> Does headers need to be defined for the PMD?

I will delete these.

> 
> <...>
> 
> > +
> > +void *hinic_dma_mem_zalloc(void *dev, size_t size, dma_addr_t
> *dma_handle,
> > +			   unsigned int flag, unsigned int align)
> 
> Why not many of the functions are not 'static'? Please make them 'static' as
> much as possible.

OK.

> 
> <...>
> 
> > +int32_t hinic_nic_dev_create(struct rte_eth_dev *eth_dev) {
> > +	struct hinic_nic_dev *nic_dev =
> > +
> 	HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(eth_dev);
> > +	int rc;
> > +
> > +	nic_dev->hwdev =
> > +		(struct hinic_hwdev *)rte_zmalloc("hinic_hwdev",
> > +						  sizeof(*nic_dev->hwdev),
> > +						  RTE_CACHE_LINE_SIZE);
> 
> There was a patch by Stephen [1] very recently to remove the casting from
> and to the "void *" which is not required by 'C'.
> To not need similar cleanups later, can you please check them at first place.
> 
> [1]https://patches.dpdk.org/project/dpdk/list/?series=4816

OK.

> 
> <...>
> 
> > +sources = files(
> > +	'hinic_pmd_dpdev.c',
> > +	'hinic_pmd_ethdev.c',
> > +#	'hinic_pmd_rx.c',
> > +#	'hinic_pmd_tx.c'
> 
> Please don't have commented code.

I will fix it.

> 
> > +	)
> > +
> > +deps += 'ethdev'
> > +deps += 'pci'
> > +deps += 'hash'
> 
> Is hash a dependency?

Yes, we used hash table in the file hinic_pmd_dpdev.c. It is better: deps += ['ethdev', 'pci', 'hash']

^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2019-06-12 15:00 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-06 11:04 [dpdk-dev] [PATCH v4 00/11] A new net PMD - hinic Ziyang Xuan
2019-06-06 11:05 ` [dpdk-dev] [PATCH v4 05/11] net/hinic/base: add eqs and context code Ziyang Xuan
2019-06-06 11:06 ` [dpdk-dev] [PATCH v4 06/11] net/hinic/base: add code for nic business Ziyang Xuan
2019-06-06 11:06 ` [dpdk-dev] [PATCH v4 08/11] net/hinic: add hinic PMD build and doc files Ziyang Xuan
2019-06-11 15:56   ` Ferruh Yigit
2019-06-06 11:06 ` [dpdk-dev] [PATCH v4 10/11] net/hinic: add TX module Ziyang Xuan
2019-06-06 11:07 ` [dpdk-dev] [PATCH v4 11/11] net/hinic: add support for basic device operations Ziyang Xuan
2019-06-11 16:02   ` Ferruh Yigit
2019-06-06 11:13 ` [dpdk-dev] [PATCH v4 01/11] net/hinic/base: add registers for Huawei Hi1822 NIC Ziyang Xuan
2019-06-06 11:04   ` Ziyang Xuan
2019-06-06 11:14 ` [dpdk-dev] [PATCH v4 02/11] net/hinic/base: add command channels code Ziyang Xuan
2019-06-06 11:05   ` Ziyang Xuan
2019-06-06 11:15 ` [dpdk-dev] [PATCH v4 03/11] net/hinic/base: add mgmt module interactive code Ziyang Xuan
2019-06-06 11:05   ` Ziyang Xuan
2019-06-06 11:15 ` [dpdk-dev] [PATCH v4 04/11] net/hinic/base: add code about hardware operation Ziyang Xuan
2019-06-06 11:05   ` Ziyang Xuan
2019-06-06 11:17 ` [dpdk-dev] [PATCH v4 07/11] net/hinic/base: add various headers Ziyang Xuan
2019-06-06 11:06   ` Ziyang Xuan
2019-06-11 16:04   ` Ferruh Yigit
2019-06-06 11:18 ` [dpdk-dev] [PATCH v4 09/11] net/hinic: add RX module Ziyang Xuan
2019-06-06 11:06   ` Ziyang Xuan
2019-06-11 15:57   ` Ferruh Yigit
2019-06-12 14:36     ` [dpdk-dev] 答复: " Xuanziyang (William, Chip Application Design Logic and Hardware Development Dept IT_Products & Solutions)
2019-06-12 15:00 [dpdk-dev] [PATCH v4 08/11] net/hinic: add hinic PMD build and doc files Xuanziyang (William, Chip Application Design Logic and Hardware Development Dept IT_Products & Solutions)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).