[dpdk-dev] [PATCH 5/5] app/testpmd: request device removal interrupt

[Gaetan Rivet <gaetan.rivet@6wind.com>]

Enable device removal event for PMD supporting it.
Add the --no-rmv-interrupt parameter to explicitly disable it.

Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
---
 app/test-pmd/parameters.c |  4 ++++
 app/test-pmd/testpmd.c    | 43 +++++++++++++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.h    |  1 +
 3 files changed, 48 insertions(+)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 89231be..792e2e9 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -197,6 +197,7 @@ usage(char* progname)
 	printf("  --disable-link-check: disable check on link status when "
 	       "starting/stopping ports.\n");
 	printf("  --no-lsc-interrupt: disable link status change interrupt.\n");
+	printf("  --no-rmv-interrupt: disable device removal interrupt.");
 }
 
 #ifdef RTE_LIBRTE_CMDLINE
@@ -563,6 +564,7 @@ launch_args_parse(int argc, char** argv)
 		{ "txpkts",			1, 0, 0 },
 		{ "disable-link-check",		0, 0, 0 },
 		{ "no-lsc-interrupt",		0, 0, 0 },
+		{ "no-rmv-interrupt",		0, 0, 0 },
 		{ 0, 0, 0, 0 },
 	};
 
@@ -982,6 +984,8 @@ launch_args_parse(int argc, char** argv)
 				no_link_check = 1;
 			if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
 				lsc_interrupt = 0;
+			if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
+				rmv_interrupt = 0;
 
 			break;
 		case 'h':
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 8bd1285..de1bb12 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -59,6 +59,7 @@
 #include <rte_memzone.h>
 #include <rte_launch.h>
 #include <rte_eal.h>
+#include <rte_alarm.h>
 #include <rte_per_lcore.h>
 #include <rte_lcore.h>
 #include <rte_atomic.h>
@@ -268,6 +269,11 @@ uint8_t no_link_check = 0; /* check by default */
 uint8_t lsc_interrupt = 1; /* enabled by default */
 
 /*
+ * Enable device removal notification.
+ */
+uint8_t rmv_interrupt = 1; /* enabled by default */
+
+/*
  * NIC bypass mode configuration options.
  */
 #ifdef RTE_NIC_BYPASS
@@ -1709,6 +1715,29 @@ check_all_ports_link_status(uint32_t port_mask)
 	}
 }
 
+static void
+rmv_event_callback(void *arg)
+{
+	struct rte_eth_dev *dev;
+	struct rte_devargs *da;
+	char name[32] = "";
+	uint8_t port_id = (intptr_t)arg;
+
+	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	dev = &rte_eth_devices[port_id];
+	da = dev->device->devargs;
+
+	stop_port(port_id);
+	close_port(port_id);
+	if (da->type == RTE_DEVTYPE_VIRTUAL)
+		snprintf(name, sizeof(name), "%s", da->virt.drv_name);
+	else if (da->type == RTE_DEVTYPE_WHITELISTED_PCI)
+		rte_eal_pci_device_name(&da->pci.addr, name, sizeof(name));
+	printf("removing device %s\n", name);
+	rte_eal_dev_detach(name);
+	dev->state = RTE_ETH_DEV_UNUSED;
+}
+
 /* This function is used by the interrupt thread */
 static void
 eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
@@ -1735,6 +1764,16 @@ eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
 			event_desc[type]);
 		fflush(stdout);
 	}
+
+	switch (type) {
+	case RTE_ETH_EVENT_INTR_RMV:
+		if (rte_eal_alarm_set(100000,
+				rmv_event_callback, (void *)(intptr_t)port_id))
+			fprintf(stderr, "Could not set up deferred device removal\n");
+		break;
+	default:
+		break;
+	}
 }
 
 static int
@@ -1905,6 +1944,10 @@ init_port_config(void)
 		    (rte_eth_devices[pid].data->dev_flags &
 		     RTE_ETH_DEV_INTR_LSC))
 			port->dev_conf.intr_conf.lsc = 1;
+		if (rmv_interrupt &&
+		    (rte_eth_devices[pid].data->dev_flags &
+		     RTE_ETH_DEV_INTR_RMV))
+			port->dev_conf.intr_conf.rmv = 1;
 	}
 }
 
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 77fa7ee..85d3e82 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -306,6 +306,7 @@ extern uint8_t  mp_anon; /**< set by "--mp-anon" parameter */
 extern uint8_t no_link_check; /**<set by "--disable-link-check" parameter */
 extern volatile int test_done; /* stop packet forwarding when set to 1. */
 extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
+extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
 
 #ifdef RTE_NIC_BYPASS
 extern uint32_t bypass_timeout; /**< Store the NIC bypass watchdog timeout */
-- 
2.1.4