DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Jiang, MaoX" <maox.jiang@intel.com>
To: "Guo, Jia" <jia.guo@intel.com>, "Ye, Xiaolong" <xiaolong.ye@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/2] net/i40e: fix binding interrupt without msix vectors
Date: Tue, 21 Jul 2020 06:50:43 +0000	[thread overview]
Message-ID: <79BEEF5375D8C04B84B9FF07CBE5ED871655EA9E@CDSMSX102.ccr.corp.intel.com> (raw)
In-Reply-To: <13cbfa88-5d4d-7d6b-5b3a-9f77b411692b@intel.com>

Thanks Jia. Comments as below.

> -----Original Message-----
> From: Guo, Jia
> Sent: Tuesday, July 21, 2020 11:58 AM
> To: Jiang, MaoX <maox.jiang@intel.com>; Ye, Xiaolong
> <xiaolong.ye@intel.com>
> Cc: dev@dpdk.org; stable@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/2] net/i40e: fix binding interrupt without
> msix vectors
> 
> hi, jiang mao
> 
> On 7/9/2020 3:50 AM, Jiang Mao wrote:
> > The value of vsi->nb_msix shouldn`t be zero, otherwise, all of
> > interrupts will be bind to vector 0.
> >
> > Fixes: 4861cde461 (i40e: new poll mode driver)
> > Cc: stable@dpdk.org
> 
> 
> Blank line is need before Signed-off. And please remember --reply-to when
> you send new version patch to trace the comments.
> 
> 
> > Signed-off-by: Jiang Mao <maox.jiang@intel.com>
> > ---
> >   drivers/net/i40e/i40e_ethdev.c | 31 +++++++++++++++++++++++--------
> >   drivers/net/i40e/i40e_ethdev.h |  2 +-
> >   2 files changed, 24 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> b/drivers/net/i40e/i40e_ethdev.c
> > index 777e149..16fcb8d 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -2001,7 +2001,7 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >   	I40E_WRITE_FLUSH(hw);
> >   }
> >
> > -void
> > +int
> >   i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx)
> >   {
> >   	struct rte_eth_dev *dev = vsi->adapter->eth_dev;
> > @@ -2021,10 +2021,14 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >
> >   	/* VF bind interrupt */
> >   	if (vsi->type == I40E_VSI_SRIOV) {
> > +		if (vsi->nb_msix == 0) {
> > +			PMD_DRV_LOG(ERR, "No msix resource");
> > +			return -EINVAL;
> > +		}
> >   		__vsi_queues_bind_intr(vsi, msix_vect,
> >   				       vsi->base_queue, vsi->nb_qps,
> >   				       itr_idx);
> > -		return;
> > +		return 0;
> >   	}
> >
> >   	/* PF & VMDq bind interrupt */
> > @@ -2041,7 +2045,10 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >   	}
> >
> >   	for (i = 0; i < vsi->nb_used_qps; i++) {
> > -		if (nb_msix <= 1) {
> > +		if (vsi->nb_msix == 0) {
> > +			PMD_DRV_LOG(ERR, "No msix resource");
> > +			return -EINVAL;
> > +		} else if (nb_msix <= 1) {
> >   			if (!rte_intr_allow_others(intr_handle))
> >   				/* allow to share MISC_VEC_ID */
> >   				msix_vect = I40E_MISC_VEC_ID;
> > @@ -2066,6 +2073,8 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >   		msix_vect++;
> >   		nb_msix--;
> >   	}
> > +
> > +	return 0;
> >   }
> >
> >   static void
> > @@ -2306,21 +2315,27 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >   	/* Map queues with MSIX interrupt */
> >   	main_vsi->nb_used_qps = dev->data->nb_rx_queues -
> >   		pf->nb_cfg_vmdq_vsi *
> RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
> > -	i40e_vsi_queues_bind_intr(main_vsi, I40E_ITR_INDEX_DEFAULT);
> > +	ret = i40e_vsi_queues_bind_intr(main_vsi,
> I40E_ITR_INDEX_DEFAULT);
> > +	if (ret < 0)
> 
> 
> Better to add some print log out of the calling if it is need. Below is
> the same.

At i40e_vsi_queues_bind_intr(), I have add a print log, I think it`s enough, otherwise it will add too many print log in code.

> 
> 
> > +		return ret;
> >   	i40e_vsi_enable_queues_intr(main_vsi);
> >
> >   	/* Map VMDQ VSI queues with MSIX interrupt */
> >   	for (i = 0; i < pf->nb_cfg_vmdq_vsi; i++) {
> >   		pf->vmdq[i].vsi->nb_used_qps =
> RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
> > -		i40e_vsi_queues_bind_intr(pf->vmdq[i].vsi,
> > -					  I40E_ITR_INDEX_DEFAULT);
> > +		ret = i40e_vsi_queues_bind_intr(pf->vmdq[i].vsi,
> > +						I40E_ITR_INDEX_DEFAULT);
> > +		if (ret < 0)
> > +			return ret;
> >   		i40e_vsi_enable_queues_intr(pf->vmdq[i].vsi);
> >   	}
> >
> >   	/* enable FDIR MSIX interrupt */
> >   	if (pf->fdir.fdir_vsi) {
> > -		i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi,
> > -					  I40E_ITR_INDEX_NONE);
> > +		ret = i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi,
> > +						I40E_ITR_INDEX_NONE);
> > +		if (ret < 0)
> > +			return ret;
> >   		i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
> >   	}
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.h
> b/drivers/net/i40e/i40e_ethdev.h
> > index e5d0ce5..33fbe77 100644
> > --- a/drivers/net/i40e/i40e_ethdev.h
> > +++ b/drivers/net/i40e/i40e_ethdev.h
> > @@ -1248,7 +1248,7 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf,
> >   void i40e_pf_disable_irq0(struct i40e_hw *hw);
> >   void i40e_pf_enable_irq0(struct i40e_hw *hw);
> >   int i40e_dev_link_update(struct rte_eth_dev *dev, int
> wait_to_complete);
> > -void i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx);
> > +int i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx);
> >   void i40e_vsi_queues_unbind_intr(struct i40e_vsi *vsi);
> >   int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi,
> >   			   struct i40e_vsi_vlan_pvid_info *info);

  reply	other threads:[~2020-07-21  6:50 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-09  2:25 Jiang Mao
2020-06-09  2:25 ` [dpdk-dev] [PATCH 2/2] net/i40e: fix fdir allocating msix resource error Jiang Mao
2020-06-17  5:43   ` Huang, ZhiminX
2020-07-08 19:52   ` Jiang Mao
2020-07-20 10:31     ` Zhang, Qi Z
2020-07-21 19:51     ` [dpdk-dev] [PATCH] " Jiang Mao
2020-06-17  5:42 ` [dpdk-dev] [PATCH 1/2] net/i40e: fix binding interrupt without msix vectors Huang, ZhiminX
2020-07-08 19:50 ` Jiang Mao
2020-07-21  3:57   ` Jeff Guo
2020-07-21  6:50     ` Jiang, MaoX [this message]
2020-07-22 17:57   ` [dpdk-dev] [PATCH v3 " Jiang Mao
2020-07-22 17:57     ` [dpdk-dev] [PATCH v3 2/2] net/i40e: fix fdir allocating msix resource error Jiang Mao
2020-07-23 16:11       ` [dpdk-dev] [PATCH v4 " Jiang Mao
2020-07-23 12:40         ` Zhang, Qi Z
2020-07-23 15:27     ` [dpdk-dev] [PATCH v4 1/2] net/i40e: fix binding interrupt without msix vectors Jiang Mao
2020-07-23 12:40       ` Zhang, Qi Z
  -- strict thread matches above, loose matches on Subject: below --
2020-06-09  1:37 [dpdk-dev] [PATCH " Jiang Mao
2020-06-09  2:02 ` Ye Xiaolong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=79BEEF5375D8C04B84B9FF07CBE5ED871655EA9E@CDSMSX102.ccr.corp.intel.com \
    --to=maox.jiang@intel.com \
    --cc=dev@dpdk.org \
    --cc=jia.guo@intel.com \
    --cc=stable@dpdk.org \
    --cc=xiaolong.ye@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).