[dpdk-dev] [PATCH v1 2/2] net/hinic: remove the operation of optical modules

[Guoyang Zhou <zhouguoyang@huawei.com>]

In the link up and link down functions, they do not need
to operate the optical module.

Fixes: 511b7371d32b ("net/hinic: fix hugepage memory leaks")
Cc: stable@dpdk.org
Signed-off-by: Guoyang Zhou <zhouguoyang@huawei.com>
---
 drivers/net/hinic/base/hinic_pmd_niccfg.c | 38 -------------------------------
 drivers/net/hinic/base/hinic_pmd_niccfg.h |  2 --
 drivers/net/hinic/hinic_pmd_ethdev.c      | 14 ------------
 3 files changed, 54 deletions(-)

diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.c b/drivers/net/hinic/base/hinic_pmd_niccfg.c
index be6445d..8c08d63 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.c
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.c
@@ -1659,44 +1659,6 @@ int hinic_get_link_mode(void *hwdev, u32 *supported, u32 *advertised)
 }
 
 /**
- * hinic_set_xsfp_tx_status - Enable or disable the fiber in
- * tx direction when set link up or down.
- *
- * @param hwdev
- *   The hardware interface of a nic device.
- * @param enable
- *   Enable or Disable.
- *
- * @return
- *   0 on success.
- *   negative error value otherwise.
- */
-int hinic_set_xsfp_tx_status(void *hwdev, bool enable)
-{
-	struct hinic_set_xsfp_status xsfp_status;
-	u16 out_size = sizeof(struct hinic_set_xsfp_status);
-	int err;
-
-	memset(&xsfp_status, 0, sizeof(xsfp_status));
-	xsfp_status.mgmt_msg_head.resp_aeq_num = HINIC_AEQ1;
-	xsfp_status.port_id = hinic_global_func_id(hwdev);
-	xsfp_status.xsfp_tx_dis = ((enable == 0) ? 1 : 0);
-
-	err = l2nic_msg_to_mgmt_sync(hwdev, HINIC_PORT_CMD_SET_XSFP_STATUS,
-		&xsfp_status, sizeof(struct hinic_set_xsfp_status),
-		&xsfp_status, &out_size);
-	if (err || !out_size || xsfp_status.mgmt_msg_head.status) {
-		PMD_DRV_LOG(ERR,
-			"Failed to %s port xsfp status, err: %d, status: 0x%x, out size: 0x%x\n",
-			enable ? "Disable" : "Enable", err,
-			xsfp_status.mgmt_msg_head.status, out_size);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
  * hinic_flush_qp_res - Flush tx && rx chip resources in case of set vport
  * fake failed when device start.
  *
diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.h b/drivers/net/hinic/base/hinic_pmd_niccfg.h
index 73b16b4..04cd374 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.h
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.h
@@ -909,8 +909,6 @@ int hinic_set_link_status_follow(void *hwdev,
 
 int hinic_get_link_mode(void *hwdev, u32 *supported, u32 *advertised);
 
-int hinic_set_xsfp_tx_status(void *hwdev, bool enable);
-
 int hinic_flush_qp_res(void *hwdev);
 
 int hinic_init_function_table(void *hwdev, u16 rx_buf_sz);
diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
index 378f2c8..6264235 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.c
+++ b/drivers/net/hinic/hinic_pmd_ethdev.c
@@ -939,13 +939,6 @@ static int hinic_dev_set_link_up(struct rte_eth_dev *dev)
 	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
 	int ret;
 
-	ret = hinic_set_xsfp_tx_status(nic_dev->hwdev, true);
-	if (ret) {
-		PMD_DRV_LOG(ERR, "Enable port tx xsfp failed, dev_name: %s, port_id: %d",
-			    nic_dev->proc_dev_name, dev->data->port_id);
-		return ret;
-	}
-
 	/* link status follow phy port status, up will open pma */
 	ret = hinic_set_port_enable(nic_dev->hwdev, true);
 	if (ret)
@@ -969,13 +962,6 @@ static int hinic_dev_set_link_down(struct rte_eth_dev *dev)
 	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
 	int ret;
 
-	ret = hinic_set_xsfp_tx_status(nic_dev->hwdev, false);
-	if (ret) {
-		PMD_DRV_LOG(ERR, "Disable port tx xsfp failed, dev_name: %s, port_id: %d",
-			    nic_dev->proc_dev_name, dev->data->port_id);
-		return ret;
-	}
-
 	/* link status follow phy port status, up will close pma */
 	ret = hinic_set_port_enable(nic_dev->hwdev, false);
 	if (ret)
-- 
1.8.3.1