From: Kevin Traynor <ktraynor@redhat.com>
To: Igor Russkikh <igor.russkikh@aquantia.com>, dev@dpdk.org
Cc: pavel.belous@aquantia.com, Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: Re: [dpdk-dev] [PATCH v2 00/21] net/atlantic: Aquantia aQtion 10G NIC Family DPDK PMD driver
Date: Fri, 21 Sep 2018 15:43:12 +0100 [thread overview]
Message-ID: <7d4268da-6e8c-6e3c-47f4-c99f0a53d83f@redhat.com> (raw)
In-Reply-To: <1536841371-12431-1-git-send-email-igor.russkikh@aquantia.com>
On 09/13/2018 01:22 PM, Igor Russkikh wrote:
> Hello DPDK community!
>
> Aquantia would like to contribute PMD for aQtion AQC10X NIC family:
> https://www.aquantia.com/products/aqtion/chips/
> These are 10G ethernet NICs with various features.
>
> We do base this work on parts of the existing native linux kernel
> driver source (atlantic). Shared code is hw_atl hardware and registers access module.
>
Hi Igor,
The link in the contributing guide [1] says "The DPDK uses the Open
Source BSD-3-Clause license for the core libraries and drivers." There
seems to be some GPL only licensed files in the patchset. There are
other examples where dual licensing is used, so perhaps that's an option
for you.
[1] http://doc.dpdk.org/guides/contributing/patches.html#source-license
http://git.dpdk.org/dpdk/tree/license/README
+cc Hemant
Kevin.
> We'd like to target this driver for 18.11 DPDK release timeline,
> it'd be good to hear comments from the community on how feasible is this.
>
> This patchset implements basic driver infrastructure,
> vlan offloads, checksumm offloads, rss control,
> multiring, jumbo frames and other features.
>
> Later on, we plan to share HW MACSEC offloads, rxflows and other features.
>
> version 2 changes:
> - fixed build on freebsd (no ETIME const)
> - fixed a bunch of checkpatch failures and warnings
> - removed extra CFLAGS disabled warning
> - making static arrays const
>
> Igor Russkikh (11):
> net/atlantic: documentation and rel notes
> net/atlantic: logging macroes and some typedefs
> net/atlantic: hw_atl register declarations
> net/atlantic: b0 hardware layer main logic
> net/atlantic: firmware operations layer
> net/atlantic: hardware register access routines
> net/atlantic: rte device start, stop, initial configuration
> net/atlantic: RSS and RETA manipulation API
> net/atlantic: LED control DPDK and private APIs
> net/atlantic: device statistics, xstats
> net/atlantic: RX side structures and implementation
>
> Pavel Belous (10):
> net/atlantic: atlantic PMD driver skeleton
> net/atlantic: link status and interrupt management
> net/atlantic: add hw adapter structures and defines
> net/atlantic: flow control configuration
> net/atlantic: MAC address manipulations
> net/atlantic: eeprom and register manipulation routines
> net/atlantic: promisc and allmulti configuration
> net/atlantic: VLAN filters and offloads
> net/atlantic: device MTU and statuses
> net/atlantic: TX side structures and implementation
>
> config/common_base | 9 +
> doc/guides/nics/atlantic.rst | 59 +
> doc/guides/nics/features/atlantic.ini | 37 +
> doc/guides/nics/index.rst | 1 +
> doc/guides/rel_notes/release_18_11.rst | 5 +
> drivers/net/Makefile | 2 +
> drivers/net/atlantic/Makefile | 46 +
> drivers/net/atlantic/atl_common.h | 96 +
> drivers/net/atlantic/atl_ethdev.c | 1751 +++++++++++++++
> drivers/net/atlantic/atl_ethdev.h | 133 ++
> drivers/net/atlantic/atl_hw_regs.c | 52 +
> drivers/net/atlantic/atl_hw_regs.h | 53 +
> drivers/net/atlantic/atl_logs.h | 68 +
> drivers/net/atlantic/atl_rxtx.c | 1365 ++++++++++++
> drivers/net/atlantic/atl_types.h | 235 ++
> drivers/net/atlantic/hw_atl/hw_atl_b0.c | 510 +++++
> drivers/net/atlantic/hw_atl/hw_atl_b0.h | 40 +
> drivers/net/atlantic/hw_atl/hw_atl_b0_internal.h | 145 ++
> drivers/net/atlantic/hw_atl/hw_atl_llh.c | 1490 +++++++++++++
> drivers/net/atlantic/hw_atl/hw_atl_llh.h | 714 ++++++
> drivers/net/atlantic/hw_atl/hw_atl_llh_internal.h | 2407 +++++++++++++++++++++
> drivers/net/atlantic/hw_atl/hw_atl_utils.c | 942 ++++++++
> drivers/net/atlantic/hw_atl/hw_atl_utils.h | 510 +++++
> drivers/net/atlantic/hw_atl/hw_atl_utils_fw2x.c | 618 ++++++
> drivers/net/atlantic/meson.build | 28 +
> drivers/net/atlantic/rte_pmd_atlantic.c | 19 +
> drivers/net/atlantic/rte_pmd_atlantic.h | 44 +
> drivers/net/atlantic/rte_pmd_atlantic_version.map | 4 +
> drivers/net/meson.build | 1 +
> mk/rte.app.mk | 1 +
> 30 files changed, 11385 insertions(+)
> create mode 100644 doc/guides/nics/atlantic.rst
> create mode 100644 doc/guides/nics/features/atlantic.ini
> create mode 100644 drivers/net/atlantic/Makefile
> create mode 100644 drivers/net/atlantic/atl_common.h
> create mode 100644 drivers/net/atlantic/atl_ethdev.c
> create mode 100644 drivers/net/atlantic/atl_ethdev.h
> create mode 100644 drivers/net/atlantic/atl_hw_regs.c
> create mode 100644 drivers/net/atlantic/atl_hw_regs.h
> create mode 100644 drivers/net/atlantic/atl_logs.h
> create mode 100644 drivers/net/atlantic/atl_rxtx.c
> create mode 100644 drivers/net/atlantic/atl_types.h
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_b0.c
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_b0.h
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_b0_internal.h
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_llh.c
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_llh.h
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_llh_internal.h
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_utils.c
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_utils.h
> create mode 100644 drivers/net/atlantic/hw_atl/hw_atl_utils_fw2x.c
> create mode 100644 drivers/net/atlantic/meson.build
> create mode 100644 drivers/net/atlantic/rte_pmd_atlantic.c
> create mode 100644 drivers/net/atlantic/rte_pmd_atlantic.h
> create mode 100644 drivers/net/atlantic/rte_pmd_atlantic_version.map
>
prev parent reply other threads:[~2018-09-21 14:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 12:22 Igor Russkikh
2018-09-21 14:20 ` Ferruh Yigit
2018-09-21 14:43 ` Kevin Traynor [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7d4268da-6e8c-6e3c-47f4-c99f0a53d83f@redhat.com \
--to=ktraynor@redhat.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=igor.russkikh@aquantia.com \
--cc=pavel.belous@aquantia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).