From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from stargate.chelsio.com (stargate.chelsio.com [12.32.117.8]) by dpdk.org (Postfix) with ESMTP id 7C2175B2C for ; Wed, 28 Feb 2018 19:05:51 +0100 (CET) Received: from localhost (scalar.blr.asicdesigners.com [10.193.185.94]) by stargate.chelsio.com (8.13.8/8.13.8) with ESMTP id w1SI5hDU006754; Wed, 28 Feb 2018 10:05:44 -0800 From: Rahul Lakkireddy To: dev@dpdk.org Cc: kumaras@chelsio.com, surendra@chelsio.com, nirranjan@chelsio.com, indranil@chelsio.com Date: Wed, 28 Feb 2018 23:34:52 +0530 Message-Id: <8367c98895d57b3854d6b87482ff6615780a27cc.1519832644.git.rahul.lakkireddy@chelsio.com> X-Mailer: git-send-email 2.5.3 In-Reply-To: References: In-Reply-To: References: Subject: [dpdk-dev] [PATCH v2 7/7] cxgbe: rework and use 32-bit port capability X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 28 Feb 2018 18:05:52 -0000 The new code uses the new 32-bit Port Capabilities exclusively and only translates to/from the old 16-bit Port Capabilities at the last point possible when talking to older Firmware. For the old versus new Firmware issue, we use the new FW_PARAMS_CMD[PFVF, CAPS32] command to tell the Firmware that we want Asynchronous Port Status updates to use the new 32-bit version of the Port Information message. If we get an error, we know we're dealing with older Firmware, and if not, we'll start getting th new 32-bit Port Capability message formats. Also, refactor t4_handle_fw_rpl() to handle new 32-bit Port Capability replies from firmware in t4_handle_get_port_info(). Original work by Surendra Mobiya Signed-off-by: Rahul Lakkireddy Signed-off-by: Kumar Sanghvi --- v2: - No changes. doc/guides/nics/cxgbe.rst | 10 +- drivers/net/cxgbe/base/common.h | 8 + drivers/net/cxgbe/base/t4_hw.c | 356 +++++++++++++++++++++++--------- drivers/net/cxgbe/base/t4fw_interface.h | 47 ++++- 4 files changed, 323 insertions(+), 98 deletions(-) diff --git a/doc/guides/nics/cxgbe.rst b/doc/guides/nics/cxgbe.rst index 6126167c5..c4afe8678 100644 --- a/doc/guides/nics/cxgbe.rst +++ b/doc/guides/nics/cxgbe.rst @@ -82,7 +82,7 @@ Supported Chelsio T6 NICs Prerequisites ------------- -- Requires firmware version **1.16.43.0** and higher. Visit +- Requires firmware version **1.17.14.0** and higher. Visit `Chelsio Download Center `_ to get latest firmware bundled with the latest Chelsio Unified Wire package. @@ -210,7 +210,7 @@ Unified Wire package for Linux operating system are as follows: .. code-block:: console - firmware-version: 1.16.43.0, TP 0.1.4.9 + firmware-version: 1.17.14.0, TP 0.1.4.9 Running testpmd ~~~~~~~~~~~~~~~ @@ -268,7 +268,7 @@ devices managed by librte_pmd_cxgbe in Linux operating system. EAL: PCI memory mapped at 0x7fd7c0200000 EAL: PCI memory mapped at 0x7fd77cdfd000 EAL: PCI memory mapped at 0x7fd7c10b7000 - PMD: rte_cxgbe_pmd: fw: 1.16.43.0, TP: 0.1.4.9 + PMD: rte_cxgbe_pmd: fw: 1.17.14.0, TP: 0.1.4.9 PMD: rte_cxgbe_pmd: Coming up as MASTER: Initializing adapter Interactive-mode selected Configuring Port 0 (socket 0) @@ -352,7 +352,7 @@ Unified Wire package for FreeBSD operating system are as follows: .. code-block:: console - dev.t5nex.0.firmware_version: 1.16.43.0 + dev.t5nex.0.firmware_version: 1.17.14.0 Running testpmd ~~~~~~~~~~~~~~~ @@ -470,7 +470,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system. EAL: PCI memory mapped at 0x8007ec000 EAL: PCI memory mapped at 0x842800000 EAL: PCI memory mapped at 0x80086c000 - PMD: rte_cxgbe_pmd: fw: 1.16.43.0, TP: 0.1.4.9 + PMD: rte_cxgbe_pmd: fw: 1.17.14.0, TP: 0.1.4.9 PMD: rte_cxgbe_pmd: Coming up as MASTER: Initializing adapter Interactive-mode selected Configuring Port 0 (socket 0) diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h index 98886288c..365e9e692 100644 --- a/drivers/net/cxgbe/base/common.h +++ b/drivers/net/cxgbe/base/common.h @@ -239,6 +239,7 @@ struct adapter_params { struct arch_specific_params arch; /* chip specific params */ bool ulptx_memwrite_dsgl; /* use of T5 DSGL allowed */ + u8 fw_caps_support; /* 32-bit Port Capabilities */ }; /* Firmware Port Capabilities types. @@ -246,6 +247,12 @@ struct adapter_params { typedef u16 fw_port_cap16_t; /* 16-bit Port Capabilities integral value */ typedef u32 fw_port_cap32_t; /* 32-bit Port Capabilities integral value */ +enum fw_caps { + FW_CAPS_UNKNOWN = 0, /* 0'ed out initial state */ + FW_CAPS16 = 1, /* old Firmware: 16-bit Port Capabilities */ + FW_CAPS32 = 2, /* new Firmware: 32-bit Port Capabilities */ +}; + struct link_config { fw_port_cap32_t pcaps; /* link capabilities */ fw_port_cap32_t acaps; /* advertised capabilities */ @@ -265,6 +272,7 @@ struct link_config { unsigned char autoneg; /* autonegotiating? */ unsigned char link_ok; /* link up? */ + unsigned char link_down_rc; /* link down reason */ }; #include "adapter.h" diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c index 46b296a9d..c66e2a6f7 100644 --- a/drivers/net/cxgbe/base/t4_hw.c +++ b/drivers/net/cxgbe/base/t4_hw.c @@ -2791,6 +2791,43 @@ void t4_dump_version_info(struct adapter *adapter) #define ADVERT_MASK (V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED) | \ FW_PORT_CAP32_ANEG) +/** + * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits + * @caps16: a 16-bit Port Capabilities value + * + * Returns the equivalent 32-bit Port Capabilities value. + */ +static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16) +{ + fw_port_cap32_t caps32 = 0; + +#define CAP16_TO_CAP32(__cap) \ + do { \ + if (caps16 & FW_PORT_CAP_##__cap) \ + caps32 |= FW_PORT_CAP32_##__cap; \ + } while (0) + + CAP16_TO_CAP32(SPEED_100M); + CAP16_TO_CAP32(SPEED_1G); + CAP16_TO_CAP32(SPEED_25G); + CAP16_TO_CAP32(SPEED_10G); + CAP16_TO_CAP32(SPEED_40G); + CAP16_TO_CAP32(SPEED_100G); + CAP16_TO_CAP32(FC_RX); + CAP16_TO_CAP32(FC_TX); + CAP16_TO_CAP32(ANEG); + CAP16_TO_CAP32(MDIX); + CAP16_TO_CAP32(MDIAUTO); + CAP16_TO_CAP32(FEC_RS); + CAP16_TO_CAP32(FEC_BASER_RS); + CAP16_TO_CAP32(802_3_PAUSE); + CAP16_TO_CAP32(802_3_ASM_DIR); + +#undef CAP16_TO_CAP32 + + return caps32; +} + /** * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits * @caps32: a 32-bit Port Capabilities value @@ -2900,6 +2937,7 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port, struct link_config *lc) { unsigned int fw_mdi = V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO); + unsigned int fw_caps = adap->params.fw_caps_support; fw_port_cap32_t fw_fc, cc_fec, fw_fec, rcap; struct fw_port_cmd cmd; @@ -2941,9 +2979,15 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port, F_FW_CMD_REQUEST | F_FW_CMD_EXEC | V_FW_PORT_CMD_PORTID(port)); cmd.action_to_len16 = - cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | + cpu_to_be32(V_FW_PORT_CMD_ACTION(fw_caps == FW_CAPS16 ? + FW_PORT_ACTION_L1_CFG : + FW_PORT_ACTION_L1_CFG32) | FW_LEN16(cmd)); - cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap)); + + if (fw_caps == FW_CAPS16) + cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap)); + else + cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap); return t4_wr_mbox(adap, mbox, &cmd, sizeof(cmd), NULL); } @@ -4278,6 +4322,31 @@ int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } +/** + * t4_link_down_rc_str - return a string for a Link Down Reason Code + * @link_down_rc: Link Down Reason Code + * + * Returns a string representation of the Link Down Reason Code. + */ +static const char *t4_link_down_rc_str(unsigned char link_down_rc) +{ + static const char * const reason[] = { + "Link Down", + "Remote Fault", + "Auto-negotiation Failure", + "Reserved", + "Insufficient Airflow", + "Unable To Determine Reason", + "No RX Signal Detected", + "Reserved", + }; + + if (link_down_rc >= ARRAY_SIZE(reason)) + return "Bad Reason Code"; + + return reason[link_down_rc]; +} + /* Return the highest speed set in the port capabilities, in Mb/s. */ static unsigned int fwcap_to_speed(fw_port_cap32_t caps) { @@ -4300,6 +4369,122 @@ static unsigned int fwcap_to_speed(fw_port_cap32_t caps) return 0; } +/** + * t4_handle_get_port_info - process a FW reply message + * @pi: the port info + * @rpl: start of the FW message + * + * Processes a GET_PORT_INFO FW reply message. + */ +static void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) +{ + const struct fw_port_cmd *cmd = (const void *)rpl; + int action = G_FW_PORT_CMD_ACTION(be32_to_cpu(cmd->action_to_len16)); + fw_port_cap32_t pcaps, acaps, linkattr; + struct link_config *lc = &pi->link_cfg; + struct adapter *adapter = pi->adapter; + enum fw_port_module_type mod_type; + enum fw_port_type port_type; + unsigned int speed, fc, fec; + int link_ok, linkdnrc; + + /* Extract the various fields from the Port Information message. + */ + switch (action) { + case FW_PORT_ACTION_GET_PORT_INFO: { + u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype); + + link_ok = (lstatus & F_FW_PORT_CMD_LSTATUS) != 0; + linkdnrc = G_FW_PORT_CMD_LINKDNRC(lstatus); + port_type = G_FW_PORT_CMD_PTYPE(lstatus); + mod_type = G_FW_PORT_CMD_MODTYPE(lstatus); + pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap)); + acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap)); + + /* Unfortunately the format of the Link Status in the old + * 16-bit Port Information message isn't the same as the + * 16-bit Port Capabilities bitfield used everywhere else ... + */ + linkattr = 0; + if (lstatus & F_FW_PORT_CMD_RXPAUSE) + linkattr |= FW_PORT_CAP32_FC_RX; + if (lstatus & F_FW_PORT_CMD_TXPAUSE) + linkattr |= FW_PORT_CAP32_FC_TX; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) + linkattr |= FW_PORT_CAP32_SPEED_100M; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) + linkattr |= FW_PORT_CAP32_SPEED_1G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) + linkattr |= FW_PORT_CAP32_SPEED_10G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G)) + linkattr |= FW_PORT_CAP32_SPEED_25G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G)) + linkattr |= FW_PORT_CAP32_SPEED_40G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G)) + linkattr |= FW_PORT_CAP32_SPEED_100G; + + break; + } + + case FW_PORT_ACTION_GET_PORT_INFO32: { + u32 lstatus32 = + be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32); + + link_ok = (lstatus32 & F_FW_PORT_CMD_LSTATUS32) != 0; + linkdnrc = G_FW_PORT_CMD_LINKDNRC32(lstatus32); + port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32); + mod_type = G_FW_PORT_CMD_MODTYPE32(lstatus32); + pcaps = be32_to_cpu(cmd->u.info32.pcaps32); + acaps = be32_to_cpu(cmd->u.info32.acaps32); + linkattr = be32_to_cpu(cmd->u.info32.linkattr32); + break; + } + + default: + dev_warn(adapter, "Handle Port Information: Bad Command/Action %#x\n", + be32_to_cpu(cmd->action_to_len16)); + return; + } + + fec = fwcap_to_cc_fec(acaps); + + fc = fwcap_to_cc_pause(linkattr); + speed = fwcap_to_speed(linkattr); + + if (mod_type != pi->mod_type) { + lc->auto_fec = fec; + pi->port_type = port_type; + pi->mod_type = mod_type; + t4_os_portmod_changed(adapter, pi->port_id); + } + if (link_ok != lc->link_ok || speed != lc->speed || + fc != lc->fc || fec != lc->fec) { /* something changed */ + if (!link_ok && lc->link_ok) { + lc->link_down_rc = linkdnrc; + dev_warn(adap, "Port %d link down, reason: %s\n", + pi->tx_chan, t4_link_down_rc_str(linkdnrc)); + } + lc->link_ok = link_ok; + lc->speed = speed; + lc->fc = fc; + lc->fec = fec; + lc->pcaps = pcaps; + lc->acaps = acaps & ADVERT_MASK; + + if (lc->acaps & FW_PORT_CAP32_ANEG) { + lc->autoneg = AUTONEG_ENABLE; + } else { + /* When Autoneg is disabled, user needs to set + * single speed. + * Similar to cxgb4_ethtool.c: set_link_ksettings + */ + lc->acaps = 0; + lc->requested_speed = fwcap_to_speed(acaps); + lc->autoneg = AUTONEG_DISABLE; + } + } +} + /** * t4_handle_fw_rpl - process a FW reply message * @adap: the adapter @@ -4321,83 +4506,21 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) unsigned int action = G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16)); - if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO) { + if (opcode == FW_PORT_CMD && + (action == FW_PORT_ACTION_GET_PORT_INFO || + action == FW_PORT_ACTION_GET_PORT_INFO32)) { /* link/module state change message */ - unsigned int speed = 0, fc = 0, i; int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid)); struct port_info *pi = NULL; - struct link_config *lc; - u32 stat = be32_to_cpu(p->u.info.lstatus_to_modtype); - int link_ok = (stat & F_FW_PORT_CMD_LSTATUS) != 0; - u32 mod = G_FW_PORT_CMD_MODTYPE(stat); - unsigned int fec; - - fc = fwcap_to_cc_pause(stat); - fec = fwcap_to_cc_fec(stat); - - if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) - speed = ETH_SPEED_NUM_100M; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) - speed = ETH_SPEED_NUM_1G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) - speed = ETH_SPEED_NUM_10G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G)) - speed = ETH_SPEED_NUM_25G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G)) - speed = ETH_SPEED_NUM_40G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G)) - speed = ETH_SPEED_NUM_100G; + int i; for_each_port(adap, i) { pi = adap2pinfo(adap, i); if (pi->tx_chan == chan) break; } - lc = &pi->link_cfg; - if (mod != pi->mod_type) { - lc->auto_fec = fec; - pi->mod_type = mod; - t4_os_portmod_changed(adap, i); - } - if (link_ok != lc->link_ok || speed != lc->speed || - fc != lc->fc || fec != lc->fec) { /* something changed */ - if (!link_ok && lc->link_ok) { - static const char * const reason[] = { - "Link Down", - "Remote Fault", - "Auto-negotiation Failure", - "Reserved", - "Insufficient Airflow", - "Unable To Determine Reason", - "No RX Signal Detected", - "Reserved", - }; - unsigned int rc = G_FW_PORT_CMD_LINKDNRC(stat); - - dev_warn(adap, "Port %d link down, reason: %s\n", - chan, reason[rc]); - } - lc->link_ok = link_ok; - lc->speed = speed; - lc->fc = fc; - lc->fec = fec; - lc->pcaps = be16_to_cpu(p->u.info.pcap); - lc->acaps = be16_to_cpu(p->u.info.acap) & ADVERT_MASK; - if (lc->acaps & FW_PORT_CAP32_ANEG) { - lc->autoneg = AUTONEG_ENABLE; - } else { - /* When Autoneg is disabled, user needs to set - * single speed. - */ - lc->acaps = 0; - lc->requested_speed = - be16_to_cpu(p->u.info.acap); - lc->requested_speed = - fwcap_to_speed(lc->requested_speed); - lc->autoneg = AUTONEG_DISABLE; - } - } + t4_handle_get_port_info(pi, rpl); } else { dev_warn(adap, "Unknown firmware reply %d\n", opcode); return -EINVAL; @@ -4426,8 +4549,8 @@ void t4_reset_link_config(struct adapter *adap, int idx) * Initializes the SW state maintained for each link, including the link's * capabilities and default speed/flow-control/autonegotiation settings. */ -static void init_link_config(struct link_config *lc, unsigned int pcaps, - unsigned int acaps) +static void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps, + fw_port_cap32_t acaps) { lc->pcaps = pcaps; lc->requested_speed = 0; @@ -4969,46 +5092,95 @@ int t4_init_rss_mode(struct adapter *adap, int mbox) int t4_port_init(struct adapter *adap, int mbox, int pf, int vf) { - u8 addr[6]; + unsigned int fw_caps = adap->params.fw_caps_support; + fw_port_cap32_t pcaps, acaps; + enum fw_port_type port_type; + struct fw_port_cmd cmd; int ret, i, j = 0; - struct fw_port_cmd c; + int mdio_addr; + u32 action; + u8 addr[6]; - memset(&c, 0, sizeof(c)); + memset(&cmd, 0, sizeof(cmd)); for_each_port(adap, i) { + struct port_info *pi = adap2pinfo(adap, i); unsigned int rss_size = 0; - struct port_info *p = adap2pinfo(adap, i); while ((adap->params.portvec & (1 << j)) == 0) j++; - c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | - F_FW_CMD_REQUEST | F_FW_CMD_READ | - V_FW_PORT_CMD_PORTID(j)); - c.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION( - FW_PORT_ACTION_GET_PORT_INFO) | - FW_LEN16(c)); - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + /* If we haven't yet determined whether we're talking to + * Firmware which knows the new 32-bit Port Capabilities, it's + * time to find out now. This will also tell new Firmware to + * send us Port Status Updates using the new 32-bit Port + * Capabilities version of the Port Information message. + */ + if (fw_caps == FW_CAPS_UNKNOWN) { + u32 param, val, caps; + + caps = FW_PARAMS_PARAM_PFVF_PORT_CAPS32; + param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | + V_FW_PARAMS_PARAM_X(caps)); + val = 1; + ret = t4_set_params(adap, mbox, pf, vf, 1, ¶m, + &val); + fw_caps = ret == 0 ? FW_CAPS32 : FW_CAPS16; + adap->params.fw_caps_support = fw_caps; + } + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | + F_FW_CMD_REQUEST | + F_FW_CMD_READ | + V_FW_PORT_CMD_PORTID(j)); + action = fw_caps == FW_CAPS16 ? FW_PORT_ACTION_GET_PORT_INFO : + FW_PORT_ACTION_GET_PORT_INFO32; + cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(action) | + FW_LEN16(cmd)); + ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd); if (ret) return ret; + /* Extract the various fields from the Port Information message. + */ + if (fw_caps == FW_CAPS16) { + u32 lstatus = + be32_to_cpu(cmd.u.info.lstatus_to_modtype); + + port_type = G_FW_PORT_CMD_PTYPE(lstatus); + mdio_addr = (lstatus & F_FW_PORT_CMD_MDIOCAP) ? + (int)G_FW_PORT_CMD_MDIOADDR(lstatus) : -1; + pcaps = be16_to_cpu(cmd.u.info.pcap); + acaps = be16_to_cpu(cmd.u.info.acap); + pcaps = fwcaps16_to_caps32(pcaps); + acaps = fwcaps16_to_caps32(acaps); + } else { + u32 lstatus32 = + be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32); + + port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32); + mdio_addr = (lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ? + (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) : + -1; + pcaps = be32_to_cpu(cmd.u.info32.pcaps32); + acaps = be32_to_cpu(cmd.u.info32.acaps32); + } + ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size); if (ret < 0) return ret; - p->viid = ret; - p->tx_chan = j; - p->rss_size = rss_size; + pi->viid = ret; + pi->tx_chan = j; + pi->rss_size = rss_size; t4_os_set_hw_addr(adap, i, addr); - ret = be32_to_cpu(c.u.info.lstatus_to_modtype); - p->mdio_addr = (ret & F_FW_PORT_CMD_MDIOCAP) ? - G_FW_PORT_CMD_MDIOADDR(ret) : -1; - p->port_type = G_FW_PORT_CMD_PTYPE(ret); - p->mod_type = FW_PORT_MOD_TYPE_NA; + pi->port_type = port_type; + pi->mdio_addr = mdio_addr; + pi->mod_type = FW_PORT_MOD_TYPE_NA; - init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap), - be16_to_cpu(c.u.info.acap)); + init_link_config(&pi->link_cfg, pcaps, acaps); j++; } return 0; diff --git a/drivers/net/cxgbe/base/t4fw_interface.h b/drivers/net/cxgbe/base/t4fw_interface.h index 0e139377f..d71c5a4af 100644 --- a/drivers/net/cxgbe/base/t4fw_interface.h +++ b/drivers/net/cxgbe/base/t4fw_interface.h @@ -491,7 +491,8 @@ enum fw_params_param_dev { * physical and virtual function parameters */ enum fw_params_param_pfvf { - FW_PARAMS_PARAM_PFVF_CPLFW4MSG_ENCAP = 0x31 + FW_PARAMS_PARAM_PFVF_CPLFW4MSG_ENCAP = 0x31, + FW_PARAMS_PARAM_PFVF_PORT_CAPS32 = 0x3A }; /* @@ -1226,6 +1227,8 @@ enum fw_port_mdi32 { enum fw_port_action { FW_PORT_ACTION_L1_CFG = 0x0001, FW_PORT_ACTION_GET_PORT_INFO = 0x0003, + FW_PORT_ACTION_L1_CFG32 = 0x0009, + FW_PORT_ACTION_GET_PORT_INFO32 = 0x000a, }; struct fw_port_cmd { @@ -1314,6 +1317,18 @@ struct fw_port_cmd { __be64 r12; } control; } dcb; + struct fw_port_l1cfg32 { + __be32 rcap32; + __be32 r; + } l1cfg32; + struct fw_port_info32 { + __be32 lstatus32_to_cbllen32; + __be32 auxlinfo32_mtu32; + __be32 linkattr32; + __be32 pcaps32; + __be32 acaps32; + __be32 lpacaps32; + } info32; } u; }; @@ -1387,6 +1402,36 @@ struct fw_port_cmd { #define G_FW_PORT_CMD_MODTYPE(x) \ (((x) >> S_FW_PORT_CMD_MODTYPE) & M_FW_PORT_CMD_MODTYPE) +#define S_FW_PORT_CMD_LSTATUS32 31 +#define M_FW_PORT_CMD_LSTATUS32 0x1 +#define V_FW_PORT_CMD_LSTATUS32(x) ((x) << S_FW_PORT_CMD_LSTATUS32) +#define F_FW_PORT_CMD_LSTATUS32 V_FW_PORT_CMD_LSTATUS32(1U) + +#define S_FW_PORT_CMD_LINKDNRC32 28 +#define M_FW_PORT_CMD_LINKDNRC32 0x7 +#define G_FW_PORT_CMD_LINKDNRC32(x) \ + (((x) >> S_FW_PORT_CMD_LINKDNRC32) & M_FW_PORT_CMD_LINKDNRC32) + +#define S_FW_PORT_CMD_MDIOCAP32 26 +#define M_FW_PORT_CMD_MDIOCAP32 0x1 +#define V_FW_PORT_CMD_MDIOCAP32(x) ((x) << S_FW_PORT_CMD_MDIOCAP32) +#define F_FW_PORT_CMD_MDIOCAP32 V_FW_PORT_CMD_MDIOCAP32(1U) + +#define S_FW_PORT_CMD_MDIOADDR32 21 +#define M_FW_PORT_CMD_MDIOADDR32 0x1f +#define G_FW_PORT_CMD_MDIOADDR32(x) \ + (((x) >> S_FW_PORT_CMD_MDIOADDR32) & M_FW_PORT_CMD_MDIOADDR32) + +#define S_FW_PORT_CMD_PORTTYPE32 13 +#define M_FW_PORT_CMD_PORTTYPE32 0xff +#define G_FW_PORT_CMD_PORTTYPE32(x) \ + (((x) >> S_FW_PORT_CMD_PORTTYPE32) & M_FW_PORT_CMD_PORTTYPE32) + +#define S_FW_PORT_CMD_MODTYPE32 8 +#define M_FW_PORT_CMD_MODTYPE32 0x1f +#define G_FW_PORT_CMD_MODTYPE32(x) \ + (((x) >> S_FW_PORT_CMD_MODTYPE32) & M_FW_PORT_CMD_MODTYPE32) + /* * These are configured into the VPD and hence tools that generate * VPD may use this enumeration. -- 2.14.1