DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Liu, Yong" <yong.liu@intel.com>
To: Jan Viktorin <viktorin@rehivetech.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Mo, YufengX" <yufengx.mo@intel.com>
Subject: Re: [dpdk-dev] |ERROR| pw 8279-8293 maintainers: claim responsibility for ARMv7
Date: Sun, 1 Nov 2015 12:30:37 +0000	[thread overview]
Message-ID: <86228AFD5BCD8E4EBFD2B90117B5E81E10F3A01A@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <20151031083753.4657232.94485.474@rehivetech.com>

Hi Viktorin,
I think the error is not related to your patch. Let me check it first. 

> -----Original Message-----
> From: Jan Viktorin [mailto:viktorin@rehivetech.com]
> Sent: Saturday, October 31, 2015 4:38 PM
> To: dev@dpdk.org
> Cc: Cao, Waterman; Liu, Yong; Mo, YufengX; Hunt, David; David Marchand
> Subject: Fw: |ERROR| pw 8279-8293 maintainers: claim responsibility for
> ARMv7
> 
> ‎Hello,
> 
> Again, I cannot see any relation with the arm patchset and this failure.
> It shouldn't affect other (x86) code at all.
> 
> From where can I get the affc455438f4cbd3b14e2d9a24fbc154e22d68d3 commit?
> Can somebody do a bisect or something? Is it a bug in the niantic driver?
> I am confused...‎
> 
> Jan Viktorin
> RehiveTech
> Sent from a mobile device
> 
>   Původní zpráva
> Od: sys_stv@intel.com
> Odesláno: sobota, 31. října 2015 6:53
> Komu: test-report@dpdk.org; viktorin@rehivetech.com
> Předmět: |ERROR| pw 8279-8293 maintainers: claim responsibility for ARMv7
> 
> Test-Label: Intel Niantic on Fedora
> Test-Status: ERROR
> Patchwork: http://www.dpdk.org/dev/patchwork/patch/8293/
> 
> DPDK git baseline: affc455438f4cbd3b14e2d9a24fbc154e22d68d3
> Patchwork ID: 8279-8293
> http://www.dpdk.org/dev/patchwork/patch/8293/
> Submitter: Jan Viktorin <viktorin@rehivetech.com>
> Date: Fri, 30 Oct 2015 01:25:42 +0100
> 
> Source Compilation:
> OS: fedora
> Nic: niantic
> i686-native-linuxapp-gcc: compile pass
> x86_64-native-linuxapp-gcc: compile pass
> 
> DTS validation:
> OS: fedora
> Nic: Niantic
> TestType: auto
> GCC: 4
> x86_64-native-linuxapp-gcc: total 75, passed 74, failed 1.
> Failed Case List:
> Target: x86_64-native-linuxapp-gcc
> OS: fedora
> Failed DTS case:
> checksum_checking:
> http://dpdk.org/browse/tools/dts/tree/test_plans/pmd_test_plan.rst
> 
> DTS Validation Error:
> ==========================================================================
> ==============================================
> ==========================================================================
> ==============================================
> TEST SUITE : TestPmd
> 
> --------------------------------------------------------------------------
> -----
> Begin: Test Casetest_checksum_checking
> --------------------------------------------------
> FAILED 'packet pass assert error, expected 60 RX bytes, actual 0'
> --------------------------------------------------
> [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1fffffffff
> -n 4 -- -i --coremask=0x2 --portmask=0x3 --nb-cores=2 --enable-rx-cksum --
> disable-hw-vlan --disable-rss --crc-strip --rxd=1024 --txd=1024 --
> rxfreet=0 --txqflags=0
> [ SUITE_DUT_CMD] set fwd csum
> [ SUITE_DUT_CMD] start
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt
> [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> [SUITE_TESTER_CMD] scapy
> [SUITE_TESTER_CMD] nutmac="90:e2:ba:4a:54:81"
> [SUITE_TESTER_CMD] sendp([Ether(dst=nutmac,
> src="52:00:00:00:00:00")/IP(len=46)/UDP(chksum=0x0)/Raw(load="P"*18)],
> iface="p785p2")
> [SUITE_TESTER_CMD] exit()
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> [ SUITE_DUT_CMD] stop
> [ SUITE_DUT_CMD] quit
> [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1fffffffff
> -n 4 -- -i --coremask=0x2 --portmask=0x3 --nb-cores=2 --enable-rx-cksum --
> disable-hw-vlan --disable-rss --crc-strip --rxd=1024 --txd=1024 --
> rxfreet=8 --txqflags=0
> [ SUITE_DUT_CMD] set fwd csum
> [ SUITE_DUT_CMD] start
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt
> [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> [SUITE_TESTER_CMD] scapy
> [SUITE_TESTER_CMD] nutmac="90:e2:ba:4a:54:81"
> [SUITE_TESTER_CMD] sendp([Ether(dst=nutmac,
> src="52:00:00:00:00:00")/IP(len=46)/UDP(chksum=0x0)/Raw(load="P"*18)],
> iface="p785p2")
> [SUITE_TESTER_CMD] exit()
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> [ SUITE_DUT_CMD] stop
> [ SUITE_DUT_CMD] quit
> [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1fffffffff
> -n 4 -- -i --coremask=0x2 --portmask=0x3 --nb-cores=2 --enable-rx-cksum --
> disable-hw-vlan --disable-rss --crc-strip --rxd=1024 --txd=1024 --
> rxfreet=16 --txqflags=0
> [ SUITE_DUT_CMD] set fwd csum
> [ SUITE_DUT_CMD] start
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt
> [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> [SUITE_TESTER_CMD] scapy
> [SUITE_TESTER_CMD] nutmac="90:e2:ba:4a:54:81"
> [SUITE_TESTER_CMD] sendp([Ether(dst=nutmac,
> src="52:00:00:00:00:00")/IP(len=46)/UDP(chksum=0x0)/Raw(load="P"*18)],
> iface="p785p2")
> [SUITE_TESTER_CMD] exit()
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> [ SUITE_DUT_CMD] stop
> [ SUITE_DUT_CMD] quit
> [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1fffffffff
> -n 4 -- -i --coremask=0x2 --portmask=0x3 --nb-cores=2 --enable-rx-cksum --
> disable-hw-vlan --disable-rss --crc-strip --rxd=1024 --txd=1024 --
> rxfreet=32 --txqflags=0
> [ SUITE_DUT_CMD] set fwd csum
> [ SUITE_DUT_CMD] start
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt
> [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> [SUITE_TESTER_CMD] scapy
> [SUITE_TESTER_CMD] nutmac="90:e2:ba:4a:54:81"
> [SUITE_TESTER_CMD] sendp([Ether(dst=nutmac,
> src="52:00:00:00:00:00")/IP(len=46)/UDP(chksum=0x0)/Raw(load="P"*18)],
> iface="p785p2")
> [SUITE_TESTER_CMD] exit()
> [ SUITE_DUT_CMD] show port stats 0
> [ SUITE_DUT_CMD] show port stats 1
> End test_checksum_checking
> --------------------------------------------------------------------------
> -----
> [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> 
> 
> 
> DPDK STV team

  reply	other threads:[~2015-11-01 12:30 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <c45ac1$k472gf@orsmga003.jf.intel.com>
2015-10-31  8:37 ` [dpdk-dev] Fw: " Jan Viktorin
2015-11-01 12:30   ` Liu, Yong [this message]
2015-11-02  5:51   ` [dpdk-dev] " Liu, Yong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86228AFD5BCD8E4EBFD2B90117B5E81E10F3A01A@SHSMSX103.ccr.corp.intel.com \
    --to=yong.liu@intel.com \
    --cc=dev@dpdk.org \
    --cc=viktorin@rehivetech.com \
    --cc=yufengx.mo@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).