From: Ray Kinsella <mdr@ashroe.eu>
To: Spike Du <spiked@nvidia.com>
Cc: matan@nvidia.com, viacheslavo@nvidia.com, orika@nvidia.com,
thomas@monjalon.net, Shahaf Shuler <shahafs@nvidia.com>,
Neil Horman <nhorman@tuxdriver.com>,
andrew.rybchenko@oktetlabs.ru, stephen@networkplumber.org,
mb@smartsharesystems.com, dev@dpdk.org, rasland@nvidia.com
Subject: Re: [PATCH v4 6/7] net/mlx5: add private API to config host port shaper
Date: Fri, 03 Jun 2022 15:55:58 +0100 [thread overview]
Message-ID: <878rqdpzhr.fsf@mdr78.vserver.site> (raw)
In-Reply-To: <20220603124821.1148119-7-spiked@nvidia.com>
Spike Du <spiked@nvidia.com> writes:
> Host port shaper can be configured with QSHR(QoS Shaper Host Register).
> Add check in build files to enable this function or not.
>
> The host shaper configuration affects all the ethdev ports belonging to the
> same host port.
>
> Host shaper can configure shaper rate and lwm-triggered for a host port.
> The shaper limits the rate of traffic from host port to wire port.
> If lwm-triggered is enabled, a 100Mbps shaper is enabled automatically
> when one of the host port's Rx queues receives fill threshold event.
>
> Signed-off-by: Spike Du <spiked@nvidia.com>
> ---
> doc/guides/nics/mlx5.rst | 35 +++++++++++
> doc/guides/rel_notes/release_22_07.rst | 1 +
> drivers/common/mlx5/linux/meson.build | 13 +++++
> drivers/common/mlx5/mlx5_prm.h | 25 ++++++++
> drivers/net/mlx5/mlx5.h | 2 +
> drivers/net/mlx5/mlx5_rx.c | 103 +++++++++++++++++++++++++++++++++
> drivers/net/mlx5/rte_pmd_mlx5.h | 30 ++++++++++
> drivers/net/mlx5/version.map | 2 +
> 8 files changed, 211 insertions(+)
>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
next prev parent reply other threads:[~2022-06-03 14:56 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 3:22 [RFC 0/6] net/mlx5: introduce limit watermark and host shaper Spike Du
2022-04-01 3:22 ` [RFC 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-05-06 3:56 ` [RFC v1 0/7] net/mlx5: introduce limit watermark and host shaper Spike Du
2022-05-06 3:56 ` [RFC v1 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-06 3:56 ` [RFC v1 2/7] common/mlx5: share interrupt management Spike Du
2022-05-06 3:56 ` [RFC v1 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-19 9:37 ` Andrew Rybchenko
2022-05-06 3:56 ` [RFC v1 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-06 3:56 ` [RFC v1 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-06 3:56 ` [RFC v1 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-06 3:56 ` [RFC v1 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-22 5:58 ` [RFC v2 0/7] introduce per-queue limit watermark and host shaper Spike Du
2022-05-22 5:58 ` [RFC v2 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-22 5:58 ` [RFC v2 2/7] common/mlx5: share interrupt management Spike Du
2022-05-22 5:58 ` [RFC v2 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-22 15:23 ` Stephen Hemminger
2022-05-23 3:01 ` Spike Du
2022-05-23 21:45 ` Thomas Monjalon
2022-05-24 2:50 ` Spike Du
2022-05-24 8:18 ` Thomas Monjalon
2022-05-25 12:59 ` Andrew Rybchenko
2022-05-25 13:58 ` Thomas Monjalon
2022-05-25 14:23 ` Andrew Rybchenko
2022-05-23 22:54 ` Stephen Hemminger
2022-05-24 3:46 ` Spike Du
2022-05-22 15:24 ` Stephen Hemminger
2022-05-23 2:18 ` Spike Du
2022-05-23 6:07 ` Morten Brørup
2022-05-23 10:58 ` Thomas Monjalon
2022-05-23 14:10 ` Spike Du
2022-05-23 14:39 ` Thomas Monjalon
2022-05-24 6:35 ` Andrew Rybchenko
2022-05-24 9:40 ` Morten Brørup
2022-05-22 5:58 ` [RFC v2 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-22 5:58 ` [RFC v2 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-22 5:58 ` [RFC v2 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-22 5:59 ` [RFC v2 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-24 15:20 ` [PATCH v3 0/7] introduce per-queue limit watermark and host shaper Spike Du
2022-05-24 15:20 ` [PATCH v3 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-24 15:20 ` [PATCH v3 2/7] common/mlx5: share interrupt management Spike Du
2022-05-24 15:20 ` [PATCH v3 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-24 15:20 ` [PATCH v3 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-24 15:20 ` [PATCH v3 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-24 15:20 ` [PATCH v3 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-24 15:20 ` [PATCH v3 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-24 15:59 ` [PATCH v3 0/7] introduce per-queue limit watermark and host shaper Thomas Monjalon
2022-05-24 19:00 ` Morten Brørup
2022-05-24 19:22 ` Thomas Monjalon
2022-05-25 14:11 ` Andrew Rybchenko
2022-05-25 13:14 ` Spike Du
2022-05-25 13:40 ` Morten Brørup
2022-05-25 13:59 ` Spike Du
2022-05-25 14:16 ` Morten Brørup
2022-05-25 14:30 ` Andrew Rybchenko
2022-06-03 12:48 ` [PATCH v4 0/7] introduce per-queue fill threshold " Spike Du
2022-06-03 12:48 ` [PATCH v4 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-06-03 12:48 ` [PATCH v4 2/7] common/mlx5: share interrupt management Spike Du
2022-06-03 14:30 ` Ray Kinsella
2022-06-03 12:48 ` [PATCH v4 3/7] ethdev: introduce Rx queue based fill threshold Spike Du
2022-06-03 14:30 ` Ray Kinsella
2022-06-04 12:46 ` Andrew Rybchenko
2022-06-06 13:16 ` Spike Du
2022-06-06 17:15 ` Andrew Rybchenko
2022-06-06 21:30 ` Thomas Monjalon
2022-06-07 8:02 ` Andrew Rybchenko
2022-06-07 6:00 ` Spike Du
2022-06-06 15:49 ` Stephen Hemminger
2022-06-03 12:48 ` [PATCH v4 4/7] net/mlx5: add LWM event handling support Spike Du
2022-06-03 12:48 ` [PATCH v4 5/7] net/mlx5: support Rx queue based fill threshold Spike Du
2022-06-03 12:48 ` [PATCH v4 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-06-03 14:55 ` Ray Kinsella [this message]
2022-06-03 12:48 ` [PATCH v4 7/7] app/testpmd: add Host Shaper command Spike Du
2022-06-07 12:59 ` [PATCH v5 0/7] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-07 12:59 ` [PATCH v5 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-06-08 20:10 ` Matan Azrad
2022-06-07 12:59 ` [PATCH v5 2/7] common/mlx5: share interrupt management Spike Du
2022-06-07 12:59 ` [PATCH v5 3/7] ethdev: introduce Rx queue based available descriptor threshold Spike Du
2022-06-07 12:59 ` [PATCH v5 4/7] net/mlx5: add LWM event handling support Spike Du
2022-06-07 12:59 ` [PATCH v5 5/7] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-07 12:59 ` [PATCH v5 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-06-07 12:59 ` [PATCH v5 7/7] app/testpmd: add Host Shaper command Spike Du
2022-06-09 7:55 ` Andrew Rybchenko
2022-06-10 2:22 ` Spike Du
2022-06-13 2:50 ` [PATCH v6] " Spike Du
2022-06-13 2:50 ` Spike Du
2022-06-14 9:43 ` Singh, Aman Deep
2022-06-14 9:54 ` Spike Du
2022-06-14 12:01 ` [PATCH v7] " Spike Du
2022-06-14 12:01 ` Spike Du
2022-06-15 7:51 ` Matan Azrad
2022-06-15 11:08 ` Thomas Monjalon
2022-06-15 12:58 ` [PATCH v8 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-15 12:58 ` [PATCH v8 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-15 14:43 ` [PATCH v9 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-15 14:43 ` [PATCH v9 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-16 8:41 ` [PATCH v10 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-16 8:41 ` [PATCH v10 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-16 8:41 ` [PATCH v10 2/6] common/mlx5: share interrupt management Spike Du
2022-06-23 16:05 ` Ray Kinsella
2022-06-16 8:41 ` [PATCH v10 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-16 8:41 ` [PATCH v10 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-16 8:41 ` [PATCH v10 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-16 8:41 ` [PATCH v10 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-19 8:14 ` [PATCH v10 0/6] introduce per-queue available descriptor threshold and host shaper Raslan Darawsheh
2022-06-15 14:43 ` [PATCH v9 2/6] common/mlx5: share interrupt management Spike Du
2022-06-15 14:43 ` [PATCH v9 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-15 14:43 ` [PATCH v9 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-15 14:43 ` [PATCH v9 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-15 14:43 ` [PATCH v9 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-15 12:58 ` [PATCH v8 2/6] common/mlx5: share interrupt management Spike Du
2022-06-15 12:58 ` [PATCH v8 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-15 12:58 ` [PATCH v8 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-15 12:58 ` [PATCH v8 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-15 12:58 ` [PATCH v8 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-08 9:43 ` [PATCH v5 0/7] introduce per-queue available descriptor threshold and host shaper Andrew Rybchenko
2022-06-08 16:35 ` [PATCH v6] ethdev: introduce available Rx descriptors threshold Andrew Rybchenko
2022-06-08 17:22 ` Thomas Monjalon
2022-06-08 17:46 ` Thomas Monjalon
2022-06-09 0:17 ` fengchengwen
2022-06-09 7:05 ` Thomas Monjalon
2022-06-10 0:01 ` fengchengwen
2022-04-01 3:22 ` [RFC 2/6] common/mlx5: share interrupt management Spike Du
2022-04-01 3:22 ` [RFC 3/6] net/mlx5: add LWM event handling support Spike Du
2022-04-01 3:22 ` [RFC 4/6] net/mlx5: add private API to configure Rxq LWM Spike Du
2022-04-01 3:22 ` [RFC 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-04-01 3:22 ` [RFC 6/6] app/testpmd: add LWM and Host Shaper command Spike Du
2022-04-05 8:58 ` [RFC 0/6] net/mlx5: introduce limit watermark and host shaper Jerin Jacob
2022-04-26 2:42 ` Spike Du
2022-05-01 12:50 ` Jerin Jacob
2022-05-02 3:58 ` Spike Du
2022-04-29 5:48 ` Spike Du
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878rqdpzhr.fsf@mdr78.vserver.site \
--to=mdr@ashroe.eu \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=mb@smartsharesystems.com \
--cc=nhorman@tuxdriver.com \
--cc=orika@nvidia.com \
--cc=rasland@nvidia.com \
--cc=shahafs@nvidia.com \
--cc=spiked@nvidia.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).