[PATCH v3 25/25] net/spnic: add doc infrastructure

[Yanling Song <songyl@ramaxel.com>]

This patch adds doc infrastructure for spnic PMD driver.

Signed-off-by: Yanling Song <songyl@ramaxel.com>
---
 MAINTAINERS                        |  6 +++
 doc/guides/nics/features/spnic.ini | 39 +++++++++++++++++++
 doc/guides/nics/index.rst          |  1 +
 doc/guides/nics/spnic.rst          | 61 ++++++++++++++++++++++++++++++
 4 files changed, 107 insertions(+)
 create mode 100644 doc/guides/nics/features/spnic.ini
 create mode 100644 doc/guides/nics/spnic.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index 18d9edaf88..12f6171aef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -919,6 +919,12 @@ F: drivers/net/qede/
 F: doc/guides/nics/qede.rst
 F: doc/guides/nics/features/qede*.ini
 
+Ramaxel SPNIC
+M: Yanling Song <songyl@ramaxel.com>
+F: drivers/net/spnic/
+F: doc/guides/nics/spnic.rst
+F: doc/guides/nics/features/spnic.ini
+
 Solarflare sfc_efx
 M: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
 F: drivers/common/sfc_efx/
diff --git a/doc/guides/nics/features/spnic.ini b/doc/guides/nics/features/spnic.ini
new file mode 100644
index 0000000000..1cec6a59fa
--- /dev/null
+++ b/doc/guides/nics/features/spnic.ini
@@ -0,0 +1,39 @@
+;
+; Supported features of 'spnic' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities   = Y
+Link status          = Y
+Link status event    = Y
+Queue start/stop     = Y
+MTU update           = Y
+Scattered Rx         = Y
+LRO                  = Y
+TSO                  = Y
+Promiscuous mode     = Y
+Allmulticast mode    = Y
+Unicast MAC filter   = Y
+Multicast MAC filter = Y
+RSS hash             = Y
+RSS key update       = Y
+RSS reta update      = Y
+Inner RSS            = Y
+SR-IOV               = Y
+Flow control         = Y
+CRC offload          = Y
+VLAN filter          = Y
+VLAN offload         = Y
+L3 checksum offload  = Y
+L4 checksum offload  = Y
+Inner L3 checksum    = Y
+Inner L4 checksum    = Y
+Basic stats          = Y
+Extended stats       = Y
+Stats per queue      = Y
+FW version           = Y
+Multiprocess aware   = Y
+Linux                = Y
+x86-64               = Y
+ARMv8                = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 1c94caccea..6d47fa64a1 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -57,6 +57,7 @@ Network Interface Controller Drivers
     pfe
     qede
     sfc_efx
+    spnic
     softnic
     tap
     thunderx
diff --git a/doc/guides/nics/spnic.rst b/doc/guides/nics/spnic.rst
new file mode 100644
index 0000000000..9305ecbb84
--- /dev/null
+++ b/doc/guides/nics/spnic.rst
@@ -0,0 +1,61 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2021 Ramaxel Memory Technology, Ltd
+
+
+SPNIC Poll Mode Driver
+======================
+
+The spnic PMD (**librte_net_spnic**) provides poll mode driver support
+for 25Gbps/100Gbps SPNxxx Network Adapters.
+
+
+Features
+--------
+
+- Multiple queues for TX and RX
+- Receiver Side Scaling（RSS）
+- RSS supports IPv4, IPv6, TCPv4, TCPv6, UDPv4 and UDPv6, use inner type for VXLAN as default
+- MAC/VLAN filtering
+- Checksum offload
+- TSO offload
+- LRO offload
+- Promiscuous mode
+- Port hardware statistics
+- Link state information
+- Link flow control(pause frame)
+- Scattered and gather for TX and RX
+- SR-IOV - Partially supported VFIO only
+- VLAN filter and VLAN offload
+- Allmulticast mode
+- MTU update
+- Unicast MAC filter
+- Multicast MAC filter
+- Set Link down or up
+- FW version
+- Multi arch support: x86_64, ARMv8.
+
+Prerequisites
+-------------
+
+- Learning about SPNIC using
+  `<xx card introduce>`_.
+
+- Getting the latest product documents and software supports using
+  `<Website to support>`_.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+It is highly recommended to upgrade the spnic driver and firmware to avoid the compatibility issues,
+and check the work mode with the latest product documents.
+
+Limitations or Known issues
+---------------------------
+Build with ICC is not supported yet.
+X86-32, Power8, ARMv7 and BSD are not supported yet.
-- 
2.32.0