From: Akhil Goyal <akhil.goyal@nxp.com>
To: Konstantin Ananyev <konstantin.ananyev@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: Remy Horton <remy.horton@intel.com>
Subject: Re: [dpdk-dev] [PATCH v5 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads
Date: Wed, 2 Jan 2019 13:42:48 +0000 [thread overview]
Message-ID: <91472d97-6d0c-c816-3843-d322dc70ae5c@nxp.com> (raw)
In-Reply-To: <1546011238-22318-2-git-send-email-konstantin.ananyev@intel.com>
On 12/28/2018 9:03 PM, Konstantin Ananyev wrote:
> Right now ipsec-secgw always enables TX offloads
> (DEV_TX_OFFLOAD_MULTI_SEGS, DEV_TX_OFFLOAD_SECURITY),
> even when they are not requested by the config.
> That causes many PMD to choose full-featured TX function,
> which in many cases is much slower then one without offloads.
> That patch adds ability for the user to disable unneeded HW offloads.
> If DEV_TX_OFFLOAD_IPV4_CKSUM is disabled by user, then
> SW version of ip cksum calculation is used.
> That allows to use vector TX function, when inline-ipsec is not
> requested.
>
> Signed-off-by: Remy Horton <remy.horton@intel.com>
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> Acked-by: Radu Nicolau <radu.nicolau@intel.com>
> ---
> doc/guides/sample_app_ug/ipsec_secgw.rst | 12 +++
> examples/ipsec-secgw/ipsec-secgw.c | 126 ++++++++++++++++++++---
> examples/ipsec-secgw/ipsec.h | 6 ++
> examples/ipsec-secgw/sa.c | 35 +++++++
> 4 files changed, 164 insertions(+), 15 deletions(-)
>
> diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst b/doc/guides/sample_app_ug/ipsec_secgw.rst
> index 4869a011d..244bde2de 100644
> --- a/doc/guides/sample_app_ug/ipsec_secgw.rst
> +++ b/doc/guides/sample_app_ug/ipsec_secgw.rst
> @@ -95,6 +95,8 @@ The application has a number of command line options::
> -p PORTMASK -P -u PORTMASK -j FRAMESIZE
> --config (port,queue,lcore)[,(port,queue,lcore]
> --single-sa SAIDX
> + --rxoffload MASK
> + --txoffload MASK
> -f CONFIG_FILE_PATH
>
> Where:
> @@ -119,6 +121,16 @@ Where:
> on both Inbound and Outbound. This option is meant for debugging/performance
> purposes.
>
> +* ``--rxoffload MASK``: RX HW offload capabilities to enable/use on this port
> + (bitmask of DEV_RX_OFFLOAD_* values). It is an optional parameter and
> + allows user to disable some of the RX HW offload capabilities.
> + By default all HW RX offloads are enabled.
> +
> +* ``--txoffload MASK``: TX HW offload capabilities to enable/use on this port
> + (bitmask of DEV_TX_OFFLOAD_* values). It is an optional parameter and
> + allows user to disable some of the TX HW offload capabilities.
> + By default all HW TX offloads are enabled.
> +
by default all should not be enabled. It should remain as it was before
your patchset.
It would be good if you can add a link to ethdev section where it
explain different offloads available.
If anyone needs to change the default behavior, a patch need to be
submitted to add that.
> * ``-f CONFIG_FILE_PATH``: the full path of text-based file containing all
> configuration items for running the application (See Configuration file
> syntax section below). ``-f CONFIG_FILE_PATH`` **must** be specified.
> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
> index 1bc0b5b50..f5db3da0c 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -124,6 +124,8 @@ struct ethaddr_info ethaddr_tbl[RTE_MAX_ETHPORTS] = {
> #define CMD_LINE_OPT_CONFIG "config"
> #define CMD_LINE_OPT_SINGLE_SA "single-sa"
> #define CMD_LINE_OPT_CRYPTODEV_MASK "cryptodev_mask"
> +#define CMD_LINE_OPT_RX_OFFLOAD "rxoffload"
> +#define CMD_LINE_OPT_TX_OFFLOAD "txoffload"
>
> enum {
> /* long options mapped to a short option */
> @@ -135,12 +137,16 @@ enum {
> CMD_LINE_OPT_CONFIG_NUM,
> CMD_LINE_OPT_SINGLE_SA_NUM,
> CMD_LINE_OPT_CRYPTODEV_MASK_NUM,
> + CMD_LINE_OPT_RX_OFFLOAD_NUM,
> + CMD_LINE_OPT_TX_OFFLOAD_NUM,
> };
>
> static const struct option lgopts[] = {
> {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
> {CMD_LINE_OPT_SINGLE_SA, 1, 0, CMD_LINE_OPT_SINGLE_SA_NUM},
> {CMD_LINE_OPT_CRYPTODEV_MASK, 1, 0, CMD_LINE_OPT_CRYPTODEV_MASK_NUM},
> + {CMD_LINE_OPT_RX_OFFLOAD, 1, 0, CMD_LINE_OPT_RX_OFFLOAD_NUM},
> + {CMD_LINE_OPT_TX_OFFLOAD, 1, 0, CMD_LINE_OPT_TX_OFFLOAD_NUM},
> {NULL, 0, 0, 0}
> };
>
> @@ -155,6 +161,13 @@ static uint32_t single_sa;
> static uint32_t single_sa_idx;
> static uint32_t frame_size;
>
> +/*
> + * RX/TX HW offload capabilities to enable/use on ethernet ports.
> + * By default all capabilities are enabled.
> + */
> +static uint64_t dev_rx_offload = UINT64_MAX;
> +static uint64_t dev_tx_offload = UINT64_MAX;
> +
> struct lcore_rx_queue {
> uint16_t port_id;
> uint8_t queue_id;
> @@ -208,8 +221,6 @@ static struct rte_eth_conf port_conf = {
> },
> .txmode = {
> .mq_mode = ETH_MQ_TX_NONE,
> - .offloads = (DEV_TX_OFFLOAD_IPV4_CKSUM |
> - DEV_TX_OFFLOAD_MULTI_SEGS),
> },
> };
>
> @@ -315,7 +326,8 @@ prepare_traffic(struct rte_mbuf **pkts, struct ipsec_traffic *t,
> }
>
> static inline void
> -prepare_tx_pkt(struct rte_mbuf *pkt, uint16_t port)
> +prepare_tx_pkt(struct rte_mbuf *pkt, uint16_t port,
> + const struct lcore_conf *qconf)
> {
> struct ip *ip;
> struct ether_hdr *ethhdr;
> @@ -325,14 +337,19 @@ prepare_tx_pkt(struct rte_mbuf *pkt, uint16_t port)
> ethhdr = (struct ether_hdr *)rte_pktmbuf_prepend(pkt, ETHER_HDR_LEN);
>
> if (ip->ip_v == IPVERSION) {
> - pkt->ol_flags |= PKT_TX_IP_CKSUM | PKT_TX_IPV4;
> + pkt->ol_flags |= qconf->outbound.ipv4_offloads;
> pkt->l3_len = sizeof(struct ip);
> pkt->l2_len = ETHER_HDR_LEN;
>
> ip->ip_sum = 0;
> +
> + /* calculate IPv4 cksum in SW */
> + if ((pkt->ol_flags & PKT_TX_IP_CKSUM) == 0)
> + ip->ip_sum = rte_ipv4_cksum((struct ipv4_hdr *)ip);
> +
something is not correct, on my hardware I still see rte_ipv4_cksum
getting called.
This result in around 2% drop due to this patch.
> ethhdr->ether_type = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
> } else {
> - pkt->ol_flags |= PKT_TX_IPV6;
> + pkt->ol_flags |= qconf->outbound.ipv6_offloads;
> pkt->l3_len = sizeof(struct ip6_hdr);
> pkt->l2_len = ETHER_HDR_LEN;
>
> @@ -346,18 +363,19 @@ prepare_tx_pkt(struct rte_mbuf *pkt, uint16_t port)
> }
>
> static inline void
> -prepare_tx_burst(struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t port)
> +prepare_tx_burst(struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t port,
> + const struct lcore_conf *qconf)
> {
> int32_t i;
> const int32_t prefetch_offset = 2;
>
> for (i = 0; i < (nb_pkts - prefetch_offset); i++) {
> rte_mbuf_prefetch_part2(pkts[i + prefetch_offset]);
> - prepare_tx_pkt(pkts[i], port);
> + prepare_tx_pkt(pkts[i], port, qconf);
> }
> /* Process left packets */
> for (; i < nb_pkts; i++)
> - prepare_tx_pkt(pkts[i], port);
> + prepare_tx_pkt(pkts[i], port, qconf);
> }
>
> /* Send burst of packets on an output interface */
> @@ -371,7 +389,7 @@ send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
> queueid = qconf->tx_queue_id[port];
> m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
>
> - prepare_tx_burst(m_table, n, port);
> + prepare_tx_burst(m_table, n, port, qconf);
>
> ret = rte_eth_tx_burst(port, queueid, m_table, n);
> if (unlikely(ret < n)) {
> @@ -954,6 +972,8 @@ print_usage(const char *prgname)
> " --config (port,queue,lcore)[,(port,queue,lcore)]"
> " [--single-sa SAIDX]"
> " [--cryptodev_mask MASK]"
> + " [--" CMD_LINE_OPT_RX_OFFLOAD " RX_OFFLOAD_MASK]"
> + " [--" CMD_LINE_OPT_TX_OFFLOAD " TX_OFFLOAD_MASK]"
> "\n\n"
> " -p PORTMASK: Hexadecimal bitmask of ports to configure\n"
> " -P : Enable promiscuous mode\n"
> @@ -966,10 +986,31 @@ print_usage(const char *prgname)
> " bypassing the SP\n"
> " --cryptodev_mask MASK: Hexadecimal bitmask of the crypto\n"
> " devices to configure\n"
> + " --" CMD_LINE_OPT_RX_OFFLOAD
> + ": bitmask of the RX HW offload capabilities to enable/use\n"
> + " (DEV_RX_OFFLOAD_*)\n"
> + " --" CMD_LINE_OPT_TX_OFFLOAD
> + ": bitmask of the TX HW offload capabilities to enable/use\n"
> + " (DEV_TX_OFFLOAD_*)\n"
> "\n",
> prgname);
> }
>
> +static int
> +parse_mask(const char *str, uint64_t *val)
> +{
> + char *end;
> + unsigned long t;
> +
> + errno = 0;
> + t = strtoul(str, &end, 0);
> + if (errno != 0 || end[0] != 0)
> + return -EINVAL;
> +
> + *val = t;
> + return 0;
> +}
> +
> static int32_t
> parse_portmask(const char *portmask)
> {
> @@ -1156,6 +1197,24 @@ parse_args(int32_t argc, char **argv)
> /* else */
> enabled_cryptodev_mask = ret;
> break;
> + case CMD_LINE_OPT_RX_OFFLOAD_NUM:
> + ret = parse_mask(optarg, &dev_rx_offload);
> + if (ret != 0) {
> + printf("Invalid argument for \'%s\': %s\n",
> + CMD_LINE_OPT_RX_OFFLOAD, optarg);
> + print_usage(prgname);
> + return -1;
> + }
> + break;
> + case CMD_LINE_OPT_TX_OFFLOAD_NUM:
> + ret = parse_mask(optarg, &dev_tx_offload);
> + if (ret != 0) {
> + printf("Invalid argument for \'%s\': %s\n",
> + CMD_LINE_OPT_TX_OFFLOAD, optarg);
> + print_usage(prgname);
> + return -1;
> + }
> + break;
> default:
> print_usage(prgname);
> return -1;
> @@ -1543,7 +1602,7 @@ cryptodevs_init(void)
> }
>
> static void
> -port_init(uint16_t portid)
> +port_init(uint16_t portid, uint64_t req_rx_offloads, uint64_t req_tx_offloads)
> {
> struct rte_eth_dev_info dev_info;
> struct rte_eth_txconf *txconf;
> @@ -1556,6 +1615,10 @@ port_init(uint16_t portid)
>
> rte_eth_dev_info_get(portid, &dev_info);
>
> + /* limit allowed HW offloafs, as user requested */
> + dev_info.rx_offload_capa &= dev_rx_offload;
> + dev_info.tx_offload_capa &= dev_tx_offload;
> +
> printf("Configuring device port %u:\n", portid);
>
> rte_eth_macaddr_get(portid, ðaddr);
> @@ -1584,14 +1647,38 @@ port_init(uint16_t portid)
> local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
> }
>
> - if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_SECURITY)
> - local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_SECURITY;
> - if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_SECURITY)
> - local_port_conf.txmode.offloads |= DEV_TX_OFFLOAD_SECURITY;
> + local_port_conf.rxmode.offloads |= req_rx_offloads;
> + local_port_conf.txmode.offloads |= req_tx_offloads;
> +
> + /* Check that all required capabilities are supported */
> + if ((local_port_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
> + local_port_conf.rxmode.offloads)
> + rte_exit(EXIT_FAILURE,
> + "Error: port %u required RX offloads: 0x%" PRIx64
> + ", avaialbe RX offloads: 0x%" PRIx64 "\n",
> + portid, local_port_conf.rxmode.offloads,
> + dev_info.rx_offload_capa);
> +
> + if ((local_port_conf.txmode.offloads & dev_info.tx_offload_capa) !=
> + local_port_conf.txmode.offloads)
> + rte_exit(EXIT_FAILURE,
> + "Error: port %u required TX offloads: 0x%" PRIx64
> + ", avaialbe TX offloads: 0x%" PRIx64 "\n",
> + portid, local_port_conf.txmode.offloads,
> + dev_info.tx_offload_capa);
> +
> if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
> local_port_conf.txmode.offloads |=
> DEV_TX_OFFLOAD_MBUF_FAST_FREE;
>
> + if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_IPV4_CKSUM)
> + local_port_conf.txmode.offloads |= DEV_TX_OFFLOAD_IPV4_CKSUM;
> +
> + printf("port %u configurng rx_offloads=0x%" PRIx64
> + ", tx_offloads=0x%" PRIx64 "\n",
> + portid, local_port_conf.rxmode.offloads,
> + local_port_conf.txmode.offloads);
> +
> local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
> dev_info.flow_type_rss_offloads;
> if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
> @@ -1639,6 +1726,13 @@ port_init(uint16_t portid)
>
> qconf = &lcore_conf[lcore_id];
> qconf->tx_queue_id[portid] = tx_queueid;
> +
> + /* Pre-populate pkt offloads based on capabilities */
> + qconf->outbound.ipv4_offloads = PKT_TX_IPV4;
> + qconf->outbound.ipv6_offloads = PKT_TX_IPV6;
> + if (req_tx_offloads & DEV_TX_OFFLOAD_IPV4_CKSUM)
> + qconf->outbound.ipv4_offloads |= PKT_TX_IP_CKSUM;
I believe this is the issue, this should not be req_tx_offload.
req_tx_offloads cannot have DEV_TX_OFFLOAD_IPV4_CKSUM set for lookaside
mode.
> +
> tx_queueid++;
>
> /* init RX queues */
> @@ -1749,6 +1843,7 @@ main(int32_t argc, char **argv)
> uint32_t lcore_id;
> uint8_t socket_id;
> uint16_t portid;
> + uint64_t req_rx_offloads, req_tx_offloads;
>
> /* init EAL */
> ret = rte_eal_init(argc, argv);
> @@ -1804,7 +1899,8 @@ main(int32_t argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
>
> - port_init(portid);
> + sa_check_offloads(portid, &req_rx_offloads, &req_tx_offloads);
> + port_init(portid, req_rx_offloads, req_tx_offloads);
> }
>
> cryptodevs_init();
> diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
> index c998c8076..9b1586f52 100644
> --- a/examples/ipsec-secgw/ipsec.h
> +++ b/examples/ipsec-secgw/ipsec.h
> @@ -146,6 +146,8 @@ struct ipsec_ctx {
> struct rte_mempool *session_pool;
> struct rte_mbuf *ol_pkts[MAX_PKT_BURST] __rte_aligned(sizeof(void *));
> uint16_t ol_pkts_cnt;
> + uint64_t ipv4_offloads;
> + uint64_t ipv6_offloads;
> };
>
> struct cdev_key {
> @@ -239,4 +241,8 @@ sa_init(struct socket_ctx *ctx, int32_t socket_id);
> void
> rt_init(struct socket_ctx *ctx, int32_t socket_id);
>
> +int
> +sa_check_offloads(uint16_t port_id, uint64_t *rx_offloads,
> + uint64_t *tx_offloads);
> +
> #endif /* __IPSEC_H__ */
> diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
> index d2d3550a4..f6271bc60 100644
> --- a/examples/ipsec-secgw/sa.c
> +++ b/examples/ipsec-secgw/sa.c
> @@ -1017,3 +1017,38 @@ outbound_sa_lookup(struct sa_ctx *sa_ctx, uint32_t sa_idx[],
> for (i = 0; i < nb_pkts; i++)
> sa[i] = &sa_ctx->sa[sa_idx[i]];
> }
> +
> +/*
> + * Select HW offloads to be used.
> + */
> +int
> +sa_check_offloads(uint16_t port_id, uint64_t *rx_offloads,
> + uint64_t *tx_offloads)
> +{
> + struct ipsec_sa *rule;
> + uint32_t idx_sa;
> +
> + *rx_offloads = 0;
> + *tx_offloads = 0;
> +
> + /* Check for inbound rules that use offloads and use this port */
> + for (idx_sa = 0; idx_sa < nb_sa_in; idx_sa++) {
> + rule = &sa_in[idx_sa];
> + if ((rule->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO ||
> + rule->type ==
> + RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
> + && rule->portid == port_id)
> + *rx_offloads |= DEV_RX_OFFLOAD_SECURITY;
> + }
> +
> + /* Check for outbound rules that use offloads and use this port */
> + for (idx_sa = 0; idx_sa < nb_sa_out; idx_sa++) {
> + rule = &sa_out[idx_sa];
> + if ((rule->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO ||
> + rule->type ==
> + RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
> + && rule->portid == port_id)
> + *tx_offloads |= DEV_TX_OFFLOAD_SECURITY;
> + }
> + return 0;
> +}
next prev parent reply other threads:[~2019-01-02 13:42 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 18:49 [dpdk-dev] [PATCH 0/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 1/7] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 0/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 1/7] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 0/8] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-07 10:01 ` Radu Nicolau
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 0/9] " Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 1/9] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-12-21 13:57 ` Akhil Goyal
2018-12-21 15:58 ` Ananyev, Konstantin
2018-12-24 9:45 ` Akhil Goyal
2018-12-24 10:19 ` Ananyev, Konstantin
2018-12-24 10:54 ` Akhil Goyal
2018-12-24 10:55 ` Akhil Goyal
2018-12-24 11:22 ` Ananyev, Konstantin
2018-12-24 11:24 ` Akhil Goyal
2018-12-24 11:37 ` Ananyev, Konstantin
2018-12-24 12:31 ` Akhil Goyal
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-02 8:48 ` Akhil Goyal
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads Konstantin Ananyev
2019-01-02 13:42 ` Akhil Goyal [this message]
2019-01-02 15:29 ` Ananyev, Konstantin
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-04 11:37 ` Akhil Goyal
2019-01-04 12:29 ` Ananyev, Konstantin
2019-01-04 14:40 ` Akhil Goyal
2019-01-04 15:02 ` Akhil Goyal
2019-01-04 17:04 ` Ananyev, Konstantin
2019-01-04 17:38 ` Akhil Goyal
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-10 15:20 ` Akhil Goyal
2019-01-11 1:08 ` Xu, Yanjie
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-11 0:00 ` De Lara Guarch, Pablo
2019-01-11 0:16 ` Ananyev, Konstantin
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 01/10] examples/ipsec-secgw: allow user to disable some Rx/Tx offloads Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 02/10] examples/ipsec-secgw: allow to specify neighbour MAC address Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2019-01-11 2:49 ` Varghese, Vipin
2019-01-11 6:56 ` Akhil Goyal
2019-01-11 8:11 ` Varghese, Vipin
2019-01-12 23:49 ` Thomas Monjalon
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 02/10] examples/ipsec-secgw: allow to specify neighbour mac address Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 02/10] examples/ipsec-secgw: allow to specify neighbour mac address Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2019-01-04 14:58 ` Akhil Goyal
2019-01-04 16:25 ` Ananyev, Konstantin
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2019-01-04 2:42 ` Varghese, Vipin
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 02/10] examples/ipsec-secgw: allow to specify neighbour mac address Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-02 11:44 ` Akhil Goyal
2019-01-02 13:43 ` Ananyev, Konstantin
2019-01-02 13:50 ` Akhil Goyal
2019-01-02 15:06 ` Ananyev, Konstantin
2019-01-03 20:36 ` Ananyev, Konstantin
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 2/9] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-12-21 14:05 ` Akhil Goyal
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 3/9] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-12-21 14:12 ` Akhil Goyal
2018-12-21 14:49 ` Ananyev, Konstantin
2018-12-21 14:57 ` Akhil Goyal
2018-12-21 15:01 ` Ananyev, Konstantin
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 4/9] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-12-21 14:25 ` Akhil Goyal
2018-12-21 14:54 ` Ananyev, Konstantin
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 5/9] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 6/9] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-21 15:15 ` Akhil Goyal
2018-12-24 12:29 ` Ananyev, Konstantin
2018-12-24 12:32 ` Akhil Goyal
2018-12-24 12:37 ` Ananyev, Konstantin
2018-12-24 13:21 ` Ananyev, Konstantin
2018-12-24 13:50 ` Akhil Goyal
2018-12-24 15:01 ` Ananyev, Konstantin
2018-12-26 9:02 ` Akhil Goyal
2018-12-27 11:06 ` Ananyev, Konstantin
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 7/9] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-12-21 15:23 ` Akhil Goyal
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 8/9] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 9/9] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 1/8] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 2/8] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 3/8] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 4/8] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 5/8] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 6/8] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 7/8] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 8/8] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 2/7] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 3/7] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 4/7] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 5/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 6/7] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 7/7] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 2/7] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 3/7] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 4/7] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 5/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 6/7] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 7/7] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=91472d97-6d0c-c816-3843-d322dc70ae5c@nxp.com \
--to=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=remy.horton@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).