DPDK patches and discussions
 help / color / mirror / Atom feed
From: Kevin Traynor <ktraynor@redhat.com>
To: Yuanhan Liu <yliu@fridaylinux.org>, dpdk stable <stable@dpdk.org>
Cc: dev@dpdk.org, Thomas Monjalon <thomas@monjalon.net>
Subject: Re: [dpdk-dev] [dpdk-stable] 17.11.3 (LTS) patches review and test
Date: Mon, 28 May 2018 11:16:55 +0100	[thread overview]
Message-ID: <96ecbff9-7e63-52f0-e765-5b00ff3024e4@redhat.com> (raw)
In-Reply-To: <20180527053517.lv24ma5n452na3cm@yuanhanliu-NB0.tencent.com>

On 05/27/2018 06:35 AM, Yuanhan Liu wrote:
> Hi all,
> 
> Here is a list of patches targeted for LTS release 17.11.3. Please
> help review and test. The planned date for the final release is 8th,
> Jun. Before that, please let me know if anyone has objections with
> these patches being applied.
> 
> These patches are located at branch 17.11 of dpdk-stable repo:
>     http://dpdk.org/browse/dpdk-stable/
> 
> Thanks.
> 
> 	--yliu
> 
> ---
> Aaron Conole (2):
>       nfp: unlink the appropriate lock file
>       nfp: allow for non-root user
> 

Hi Yuanhan,

These patches which are stable relevant only, need a small fix which is
here on 18.02 branch:
http://dpdk.org/browse/dpdk-stable/commit/?h=18.02&id=e89e323e4ce58f2cbbc7afcc2d5dc7ce66075e81

thanks,
Kevin.

> Adrien Mazarguil (1):
>       app/testpmd: fix empty list of RSS queues for flow
> 
> Ajit Khaparde (9):
>       net/bnxt: fix LRO disable
>       net/bnxt: fix Rx drop setting
>       net/bnxt: set padding flags in Rx descriptor
>       net/bnxt: fix endianness of flag
>       net/bnxt: fix Rx checksum flags for tunnel frames
>       net/bnxt: free memory allocated for VF filters
>       net/bnxt: avoid invalid vnic id in set L2 Rx mask
>       net/bnxt: fix usage of vnic id
>       net/bnxt: fix Rx checksum flags
> 
> Alejandro Lucero (5):
>       net/nfp: fix assigning port id in mbuf
>       net/nfp: fix barrier location
>       net/nfp: fix link speed capabilities
>       doc: fix NFP NIC guide grammar
>       net/nfp: fix mbufs releasing when stop or close
> 
> Allain Legacy (1):
>       ip_frag: fix double free of chained mbufs
> 
> Anatoly Burakov (4):
>       app/crypto-perf: fix IOVA translation
>       mem: do not use physical addresses in IOVA as VA mode
>       vfio: do not needlessly check for IOVA mode
>       mempool: fix virtual address population
> 
> Andrew Rybchenko (6):
>       net/sfc: add missing defines for SAL annotation
>       net/sfc: fix mbuf data alignment calculation
>       net/sfc/base: fix comparison always true warning
>       mempool: fix leak when no objects are populated
>       test/mempool: fix autotest retry
>       net/sfc: ignore spec bits not covered by mask
> 
> Andy Green (3):
>       net/bnx2x: do not cast function pointers as a policy
>       net/bnx2x: fix KR2 device check
>       net/bnx2x: fix memzone name overrun
> 
> Ashish Jain (1):
>       event/dpaa2: remove link from info structure
> 
> Beilei Xing (3):
>       net/i40e: fix DDP profile DEL operation
>       net/i40e: fix link status update
>       net/i40e: fix failing to disable FDIR Tx queue
> 
> Bin Huang (1):
>       net/mlx5: add packet type index for TCP ack
> 
> Chas Williams (5):
>       net/vmxnet3: set the queue shared buffer at start
>       net/bonding: fix setting VLAN ID on slave ports
>       net/bonding: clear started state if start fails
>       net/ixgbe: fix busy wait during checking link status
>       net/bonding: export mode 4 slave info routine
> 
> Chuhong Yao (1):
>       net/liquidio: fix link state fetching during start
> 
> Ciara Loftus (1):
>       net/vhost: initialise device as inactive
> 
> Dan Gora (1):
>       kni: fix build on CentOS 7.4
> 
> Daniel Shelepov (1):
>       app/testpmd: fix burst stats reporting
> 
> David Hunt (4):
>       mk: fix make defconfig on FreeBSD
>       test/distributor: fix return type of thread function
>       test/pipeline: fix return type of stub miss
>       examples/performance-thread: fix return type of threads
> 
> Fan Zhang (2):
>       net/i40e: fix link update no wait
>       crypto/scheduler: fix possible duplicated ring names
> 
> Ferruh Yigit (4):
>       pci: remove duplicated symbol from map file
>       net/tap: fix icc build
>       drivers/net: fix link autoneg value for virtual PMDs
>       net/i40e: fix shifts of signed values
> 
> Gaetan Rivet (2):
>       bus/fslmc: fix find device start condition
>       bus/pci: fix find device implementation
> 
> Gowrishankar Muthukrishnan (2):
>       eal/ppc: remove braces in SMP memory barrier macro
>       net/bonding: fix primary slave port id storage type
> 
> Harish Patil (1):
>       net/qede: fix multicast filtering
> 
> Hemant Agrawal (6):
>       net/dpaa: fix oob access
>       bus/dpaa: fix resource leak
>       net/dpaa2: fix xstats
>       app/crypto-perf: fix excess crypto device error
>       examples/l2fwd-crypto: fix the default aead assignments
>       crypto/dpaa2_sec: fix HMAC supported digest sizes
> 
> Hyong Youb Kim (1):
>       net/enic: allocate stats DMA buffer upfront during probe
> 
> Ivan Malov (2):
>       net/sfc: add missing Rx fini on RSS setup fail path
>       net/sfc: process RSS settings on Rx configure step
> 
> Jasvinder Singh (1):
>       test/pipeline: fix type of table entry parameter
> 
> Jerin Jacob (2):
>       app/crypto-perf: use strcpy for allocated string
>       app/crypto-perf: fix parameters copy
> 
> John Daley (1):
>       net/enic: fix crash on MTU update with non-setup queues
> 
> Junjie Chen (2):
>       net/vhost: fix crash when creating vdev dynamically
>       net/vhost: fix invalid state
> 
> Kirill Rybalchenko (2):
>       crypto/scheduler: fix multicore rings re-use
>       crypto/scheduler: fix 64-bit mask of workers cores
> 
> Lee Roberts (1):
>       kni: fix build on RHEL 7.5
> 
> Matan Azrad (10):
>       ethdev: fix port accessing after release
>       app/testpmd: fix slave port detection
>       app/testpmd: fix valid ports prints
>       app/testpmd: fix forward ports update
>       app/testpmd: fix forward ports Rx flush
>       app/testpmd: fix synchronic port hotplug
>       app/testpmd: fix removed device link status asking
>       net/bonding: fix slave activation simultaneously
>       net/failsafe: fix removed sub-device cleanup
>       net/failsafe: fix duplicate event registration
> 
> Matej Vido (2):
>       net/szedata2: fix total stats
>       net/szedata2: fix format string for PCI address
> 
> Maxime Coquelin (1):
>       vhost: fix compilation issue when vhost debug enabled
> 
> Nachiketa Prachanda (1):
>       bus/vdev: fix finding device by name
> 
> Natalie Samsonov (1):
>       net/mrvl: fix crash when port is closed without starting
> 
> Nélio Laranjeiro (1):
>       net/mlx5: fix flow creation with a single target queue
> 
> Pablo de Lara (7):
>       crypto/zuc: do not set default op status
>       crypto/zuc: batch ops with same transform
>       net/ixgbe: enable vector PMD for icc 32 bits
>       crypto/scheduler: set null pointer after freeing
>       crypto/scheduler: fix memory leak
>       app/crypto-perf: check minimum lcore number
>       cryptodev: fix supported size check
> 
> Pascal Mazon (1):
>       net/qede: fix alloc from socket 0
> 
> Pavan Nikhilesh (1):
>       hash: fix missing spinlock unlock in add key
> 
> Phil Yang (1):
>       test: fix memory flags test for low NUMA nodes number
> 
> Qi Zhang (2):
>       ethdev: fix queue start
>       app/testpmd: fix command token
> 
> Qiming Yang (1):
>       net/ixgbe: fix DCB configuration
> 
> Radu Nicolau (2):
>       app/procinfo: fix strncpy usage in args parsing
>       examples/exception_path: limit core count to 64
> 
> Rasesh Mody (2):
>       net/bnx2x: fix for PCI FLR after ungraceful exit
>       net/qede: fix missing loop index in Tx SG mode
> 
> Raslan Darawsheh (1):
>       net/failsafe: fix probe cleanup
> 
> Reshma Pattan (2):
>       test/reorder: fix freeing mbuf twice
>       examples/quota_watermark: fix return type of threads
> 
> Roman Zhukov (1):
>       net/sfc: fix type of opaque pointer in perf profile handler
> 
> Santosh Shukla (2):
>       net/octeontx: fix null pointer dereference
>       net/octeontx: fix uninitialized variable in port open
> 
> Shahed Shaikh (1):
>       net/qede: fix unicast filter routine return code
> 
> Stefan Hajnoczi (1):
>       vhost: fix message payload union in setting ring address
> 
> Stephen Hemminger (1):
>       net/octeontx: fix uninitialized speed variable
> 
> Thomas Monjalon (2):
>       mbuf: fix Tx checksum offload API doc
>       mbuf: improve tunnel Tx offloads API doc
> 
> Tomasz Duszynski (1):
>       net/mrvl: fix Rx descriptors number
> 
> Tomasz Kulasek (5):
>       vhost: fix offset while mmaping log base address
>       vhost: check cmsg not null
>       vhost: fix device cleanup at stop
>       vhost: fix realloc failure
>       vhost: fix ring index returned to master on stop
> 
> Tonghao Zhang (2):
>       net/bonding: free mempool used in mode 6
>       vhost: fix dead lock on closing in server mode
> 
> Wenzhuo Lu (1):
>       net/ixgbe: fix too many interrupts
> 
> Xiaoxin Peng (1):
>       net/bnxt: fix Rx mbuf and agg ring leak in dev stop
> 
> Xueming Li (1):
>       net/mlx5: fix existing file removal
> 
> Yongseok Koh (1):
>       doc: add timestamp offload to mlx5 features
> 
> Yunjian Wang (2):
>       net/i40e: fix intr callback unregister by adding retry
>       net/ixgbe: fix intr callback unregister by adding retry
> 

  reply	other threads:[~2018-05-28 10:16 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-27  5:35 [dpdk-dev] " Yuanhan Liu
2018-05-28 10:16 ` Kevin Traynor [this message]
2018-06-07 23:09 ` Raslan Darawsheh
2018-06-08 14:29   ` Yuanhan Liu
2018-06-08 15:00 ` Bruce Richardson
2018-06-08 15:20   ` Yuanhan Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=96ecbff9-7e63-52f0-e765-5b00ff3024e4@redhat.com \
    --to=ktraynor@redhat.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    --cc=thomas@monjalon.net \
    --cc=yliu@fridaylinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).