From: "Wu, Jingjing" <jingjing.wu@intel.com>
To: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] ixgbe: fix x550 flow director issue
Date: Mon, 15 Jun 2015 07:19:46 +0000 [thread overview]
Message-ID: <9BB6961774997848B5B42BEC655768F8C533E8@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1434347966-29668-1-git-send-email-wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Monday, June 15, 2015 1:59 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] ixgbe: fix x550 flow director issue
>
> On x550, flow director doesn't support other IP packets directly.
> If we want to monitor IP other packets, the L4 protocol and ports must be
> masked. It means, on x550, if we want to add a flow director filter for other
> IP packets, a flow director mask must have been configed to mask L4
> protocol and ports.
>
> Return err when the user try to config a flow director filter for other IP
> packets without flow director mask configed before. And print err log for it.
>
> Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
> ---
> drivers/net/ixgbe/ixgbe_fdir.c | 24 +++++++++++++++++++++++-
> 1 file changed, 23 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ixgbe/ixgbe_fdir.c b/drivers/net/ixgbe/ixgbe_fdir.c
> index db48817..40824ba 100644
> --- a/drivers/net/ixgbe/ixgbe_fdir.c
> +++ b/drivers/net/ixgbe/ixgbe_fdir.c
> @@ -334,9 +334,10 @@ fdir_set_input_mask_82599(struct rte_eth_dev
> *dev,
> fdirtcpm = reverse_fdir_bitmasks(input_mask->dst_port_mask,
> input_mask->src_port_mask);
>
> - /* write both the same so that UDP and TCP use the same mask */
> + /* write all the same so that UDP, TCP and SCTP use the same mask
> */
> IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
> IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
> + IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
> info->mask.src_port_mask = input_mask->src_port_mask;
> info->mask.dst_port_mask = input_mask->dst_port_mask;
>
> @@ -899,10 +900,31 @@ ixgbe_add_del_fdir_filter(struct rte_eth_dev *dev,
> uint8_t queue;
> bool is_perfect = FALSE;
> int err;
> + struct ixgbe_hw_fdir_info *info =
> + IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data-
> >dev_private);
>
> if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_NONE)
> return -ENOTSUP;
>
> + /*
> + * Sanity check for x550.
> + * When adding a new filter with flow type set to IPv4-other,
> + * the flow director mask should be configed before,
> + * and the L4 protocol and ports are masked.
> + */
> + if ((!del) &&
> + (hw->mac.type == ixgbe_mac_X550 ||
> + hw->mac.type == ixgbe_mac_X550EM_x) &&
> + (fdir_filter->input.flow_type ==
> + RTE_ETH_FLOW_NONFRAG_IPV4_OTHER) &&
> + (info->mask.src_port_mask != 0 ||
> + info->mask.dst_port_mask != 0)) {
> + PMD_DRV_LOG(ERR, "By this device,"
> + " IPv4-other is not supported without"
> + " L4 protocol and ports masked!");
> + return -ENOTSUP;
> + }
> +
> if (dev->data->dev_conf.fdir_conf.mode ==
> RTE_FDIR_MODE_PERFECT)
> is_perfect = TRUE;
>
> --
> 1.9.3
next prev parent reply other threads:[~2015-06-15 7:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-15 5:59 Wenzhuo Lu
2015-06-15 7:19 ` Wu, Jingjing [this message]
2015-06-15 20:59 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9BB6961774997848B5B42BEC655768F8C533E8@SHSMSX104.ccr.corp.intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).