From: Mariappan Rajendran <Mariappan.Rajendran@infinite.com>
To: "dev@dpdk.org" <dev@dpdk.org>
Subject: [dpdk-dev] Issue with configuring iproute using netdpcmd and running opendp
Date: Mon, 29 Feb 2016 14:21:55 +0000 [thread overview]
Message-ID: <9FD1D15E8DE6B643B19117B8EE44285578498526@ICSBLRMB02.infics.com> (raw)
In-Reply-To: <9FD1D15E8DE6B643B19117B8EE4428557849850A@ICSBLRMB02.infics.com>
Hi,
I am trying to configure the iproute using netdpcmd(from dpdk-odp repository), but it is failing. Kindly help to resolve this issue.
root@ICSCHELAP1003:/home/hadmin/Mari/dpdk-odp/netdp_cmd# ./build/netdpcmd
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 1 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Analysing 64 files
EAL: Mapped segment 0 of size 0x200000
EAL: Mapped segment 1 of size 0x400000
EAL: Mapped segment 2 of size 0x600000
EAL: Mapped segment 3 of size 0x200000
EAL: Mapped segment 4 of size 0x200000
EAL: Mapped segment 5 of size 0x200000
EAL: Mapped segment 6 of size 0x200000
EAL: Mapped segment 7 of size 0x200000
EAL: Mapped segment 8 of size 0x200000
EAL: Mapped segment 9 of size 0x200000
EAL: Mapped segment 10 of size 0x400000
EAL: Mapped segment 11 of size 0x400000
EAL: Mapped segment 12 of size 0x400000
EAL: Mapped segment 13 of size 0x200000
EAL: Mapped segment 14 of size 0x2200000
EAL: Mapped segment 15 of size 0x1000000
EAL: Mapped segment 16 of size 0x200000
EAL: Mapped segment 17 of size 0x400000
EAL: Mapped segment 18 of size 0x2000000
EAL: memzone_reserve_aligned_thread_unsafe(): memzone <RG_MP_log_history> already exists
RING: Cannot reserve memory
EAL: TSC frequency is ~1895612 KHz
EAL: Master lcore 0 is ready (tid=f7fdc940;cpuset=[0])
Lookup ring(NETDP_CTRL_PRI_2_SEC) failed
PANIC in main():
Cannot init ring
5: [./build/netdpcmd() [0x42c223]]
4: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7ffff7105ec5]]
3: [./build/netdpcmd() [0x42ab3c]]
2: [./build/netdpcmd(__rte_panic+0xc9) [0x424f31]]
1: [./build/netdpcmd(rte_dump_stack+0x28) [0x495128]]
Aborted
Also, i am getting the below error while running opendp.
root@ICSCHELAP1003:/home/hadmin/Mari/dpdk-odp/opendp# ./build/opendp -c 0x1 -n 1 -- -p 0x1 --config="(0,0,0)"
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 1 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff6e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7ffff6800000 (size = 0x400000)
EAL: Ask a virtual area of 0x600000 bytes
EAL: Virtual area found at 0x7ffff6000000 (size = 0x600000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff5c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff5800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff5400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff5000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff4c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff4800000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff4400000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7ffff3e00000 (size = 0x400000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7ffff3800000 (size = 0x400000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7ffff3200000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ffff2e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x2200000 bytes
EAL: Virtual area found at 0x7ffff0a00000 (size = 0x2200000)
EAL: Ask a virtual area of 0x1000000 bytes
EAL: Virtual area found at 0x7fffef800000 (size = 0x1000000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7fffef400000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7fffeee00000 (size = 0x400000)
EAL: Ask a virtual area of 0x2000000 bytes
EAL: Virtual area found at 0x7fffecc00000 (size = 0x2000000)
EAL: Requesting 64 pages of size 2MB from socket 0
EAL: TSC frequency is ~1895612 KHz
EAL: Master lcore 0 is ready (tid=f7fdc980;cpuset=[0])
param nb 1 ports 0
port id 0
port 0 is not present on the board
EAL: Error - exiting with code: 1
Cause: check_port_config failed
Below is my ifconfig, do i need to configure anything before running opendp ?
root@ICSCHELAP1003:/home/hadmin/Mari/dpdk-odp/opendp# ifconfig
eth13 Link encap:Ethernet HWaddr 34:e6:d7:2b:89:60
inet addr:172.27.10.27 Bcast:172.27.10.255 Mask:255.255.255.0
inet6 addr: fe80::36e6:d7ff:fe2b:8960/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:1220416 errors:0 dropped:11 overruns:0 frame:0
TX packets:846271 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1222356177 (1.2 GB) TX bytes:437558306 (437.5 MB)
Interrupt:20 Memory:f7c00000-f7c20000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:5111141 errors:0 dropped:0 overruns:0 frame:0
TX packets:5111141 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1365308353 (1.3 GB) TX bytes:1365308353 (1.3 GB)
Thanks,
Mari.
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s).
If you are not the intended recipient, please notify so to the sender by e-mail and delete the original message.
In such cases, please notify us immediately at info@infinite.com . Further, you are not to copy,
disclose, or distribute this e-mail or its contents to any unauthorized person(s) .Any such actions are
considered unlawful. This e-mail may contain viruses. Infinite has taken every reasonable precaution to minimize
this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should
carry out your own virus checks before opening the e-mail or attachments. Infinite reserves the right to monitor
and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail
address may be stored on the Infinite e-mail system.
***INFINITE******** End of Disclaimer********INFINITE********
parent reply other threads:[~2016-02-29 14:20 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <9FD1D15E8DE6B643B19117B8EE4428557849850A@ICSBLRMB02.infics.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9FD1D15E8DE6B643B19117B8EE44285578498526@ICSBLRMB02.infics.com \
--to=mariappan.rajendran@infinite.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).