DPDK patches and discussions
 help / color / mirror / Atom feed
From: Luca Boccassi <bluca@debian.org>
To: Christian Ehrhardt <christian.ehrhardt@canonical.com>,
	dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [RFC] avoid libfdt checks adding full paths to pkg-config
Date: Tue, 01 Sep 2020 17:16:14 +0100
Message-ID: <9bf44dac86b43740e608b8592a0696c07cc2afa8.camel@debian.org> (raw)
In-Reply-To: <20200901155847.3528114-1-christian.ehrhardt@canonical.com>

On Tue, 2020-09-01 at 17:58 +0200, Christian Ehrhardt wrote:
> The checks for libfdt try dependency() first which would only work if
> a pkg-config would be present but libfdt has none.
> Then it probes for the lib path itself via cc.find_library.
> 
> But later it adds the result of either probe to ext_deps which ends up
> in build and also the resulting pkg-config to contain toolchain versioned
> paths in Libs.private like:
>   /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libfdt.so
> which obviously breaks on toolchain updates.
> 
> In general libs used multiple times - ipn3ke + ifpga in this case - are
> checked centrally in config/meson.build so move it there and fix the
> adding of dependencies to not use the full file path.
> 
> The result is libfdt in pkg-config now showing up as:
>   Libs.private: -pthread -lm -ldl -lnuma -lfdt -lpcap
> 
> Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
> ---
>  config/meson.build             | 9 +++++++++
>  drivers/net/ipn3ke/meson.build | 6 +-----
>  drivers/raw/ifpga/meson.build  | 7 +------
>  3 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/config/meson.build b/config/meson.build
> index cff8b33dd2..1c8317e750 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -150,6 +150,15 @@ if numa_dep.found() and cc.has_header('numaif.h')
>  	dpdk_extra_ldflags += '-lnuma'
>  endif
>  
> +has_libfdt = 0
> +fdt_dep = cc.find_library('libfdt', required: false)
> +if fdt_dep.found() and cc.has_header('fdt.h')
> +	dpdk_conf.set10('RTE_HAS_LIBFDT', true)
> +	has_libfdt = 1
> +	add_project_link_arguments('-lfdt', language: 'c')
> +	dpdk_extra_ldflags += '-lfdt'
> +endif
> +
>  # check for libbsd
>  libbsd = dependency('libbsd', required: false)
>  if libbsd.found()
> diff --git a/drivers/net/ipn3ke/meson.build b/drivers/net/ipn3ke/meson.build
> index ec9cb7daf0..de6e03ca65 100644
> --- a/drivers/net/ipn3ke/meson.build
> +++ b/drivers/net/ipn3ke/meson.build
> @@ -9,11 +9,7 @@
>  #  rte_eth_switch_domain_free()
>  #
>  
> -dep = dependency('libfdt', required: false)
> -if not dep.found()
> -	dep = cc.find_library('libfdt', required: false)
> -endif
> -if not dep.found()
> +if has_libnuma == 0
>  	build = false
>  	reason = 'missing dependency, "libfdt"'
>  	subdir_done()
> diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build
> index 05a1711b5d..d4a128d67e 100644
> --- a/drivers/raw/ifpga/meson.build
> +++ b/drivers/raw/ifpga/meson.build
> @@ -1,11 +1,7 @@
>  # SPDX-License-Identifier: BSD-3-Clause
>  # Copyright(c) 2018 Intel Corporation
>  
> -dep = dependency('libfdt', required: false)
> -if not dep.found()
> -	dep = cc.find_library('libfdt', required: false)
> -endif
> -if not dep.found()
> +if has_libnuma == 0

if has_libfdt == 0 ? Same above

>  	build = false
>  	reason = 'missing dependency, "libfdt"'
>  	subdir_done()
> @@ -16,7 +12,6 @@ objs = [base_objs]
>  
>  deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs',
>  	'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke']
> -ext_deps += dep
>  
>  sources = files('ifpga_rawdev.c')

With the above correction, LGTM.

Reviewed-by: Luca Boccassi <bluca@debian.org>

-- 
Kind regards,
Luca Boccassi

  parent reply	other threads:[~2020-09-01 16:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-01 15:58 Christian Ehrhardt
2020-09-01 16:10 ` Christian Ehrhardt
2020-09-01 16:16 ` Luca Boccassi [this message]
2020-09-02 11:09   ` Christian Ehrhardt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9bf44dac86b43740e608b8592a0696c07cc2afa8.camel@debian.org \
    --to=bluca@debian.org \
    --cc=christian.ehrhardt@canonical.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git