From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: Chas Williams <3chas3@gmail.com>,
Luca Boccassi <bluca@debian.org>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate
Date: Thu, 8 Nov 2018 02:58:55 +0000 [thread overview]
Message-ID: <A2573D2ACFCADC41BB3BE09C6DE313CA07E69E3E@PGSMSX103.gar.corp.intel.com> (raw)
In-Reply-To: <45b8b29e-6310-c906-5d22-e9797a81547a@gmail.com>
Hi,Chas Williams
> -----Original Message-----
> From: Chas Williams [mailto:3chas3@gmail.com]
> Sent: Thursday, November 8, 2018 2:55 AM
> To: Zhao1, Wei <wei.zhao1@intel.com>; Luca Boccassi <bluca@debian.org>;
> dev@dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>; stable@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate
>
>
>
> On 11/07/2018 04:17 AM, Zhao1, Wei wrote:
> > Hi, Luca Boccassi
> >
> > The purpose of this patch is to reduce the mailbox interrupt from vf to pf,
> but there seem some point need for discussion in this patch.
> >
> > First, I do not know why do you change code of function
> > ixgbe_check_mac_link_vf(), because in rte_eth_link_get_nowait() and
> rte_eth_link_get(), it will call ixgbe_dev_link_update()-
> >ixgbe_dev_link_update_share()-> ixgbevf_check_link() for VF, NOT
> ixgbe_check_mac_link_vf() in your patch!
> >
> > Second, in function ixgbevf_check_link(), there is mailbox message
> > read operation for vf, " if (mbx->ops.read(hw, &in_msg, 1, 0))", that
> > is ixgbe_read_mbx_vf() , This will cause interrupt from vf to pf, this is just
> the point of this patch, it is also the problem that you want to solve.
> > So, you use autoneg_wait_to_complete flag to control this mailbox
> message read operation, maybe you will use rte_eth_link_get_nowait(),
> Which set autoneg_wait_to_complete = 0, then the interrupt from vf to pf
> can be reduced.
> >
> > But I do not think this patch is necessary, because in
> > ixgbevf_check_link(), it,has
>
> I think you are right here. This patch dates to before the addition of the vf
> argument to ixgbe_dev_link_update_share() and the split of .link_update
> between ixgbe and ixgbevf. At one point, this patch was especially beneficial
> if you were running bonding (which tends to make quite a few link status
> checks).
If you have other idea based on this patch, I am willing to review and ack.
>
> So this patch probably hasn't been helping at this point. I will try to get some
> time to locally test this.
>
> > "
> > bool no_pflink_check = wait_to_complete == 0;
> >
> > ////////////////////////
> >
> > if (no_pflink_check) {
> > if (*speed == IXGBE_LINK_SPEED_UNKNOWN)
> > mac->get_link_status = true;
> > else
> > mac->get_link_status
> > = false;
> >
> > goto out;
> > }
> > "
> > Comment of "for a quick link status checking, wait_to_compelet == 0, skip
> PF link status checking " is clear.
> >
> > That means in rte_eth_link_get_nowait(), code will skip this mailbox
> > read interrupt, only in
> > rte_eth_link_get() there will be this interrupt, so I think what you
> > need to is just replace
> > rte_eth_link_get() with rte_eth_link_get_nowait() in your APP, that
> > will reduce interrupt from vf to pf in mailbox read.
> >
> >
> >> -----Original Message-----
> >> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca Boccassi
> >> Sent: Wednesday, August 15, 2018 10:15 PM
> >> To: dev@dpdk.org
> >> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> >> <konstantin.ananyev@intel.com>; Luca Boccassi <bluca@debian.org>;
> >> stable@dpdk.org
> >> Subject: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt
> >> rate
> >>
> >> We have observed high rate of NIC PF interrupts when VNF is using
> >> DPDK APIs rte_eth_link_get_nowait() and rte_eth_link_get() functions,
> >> as they are causing VF driver to send many MBOX ACK messages.
> >>
> >> With these changes, the interrupt rates go down significantly. Here's
> >> some testing results:
> >>
> >> Without the patch:
> >>
> >> $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f'
> >> /proc/interrupts
> >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
> >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
> >> 34: 88 0 0 0 0 41 30 509 0 0
> 350
> >> 24 88 114 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0
> >> 35: 49 24 0 0 65 130 64 29 67 0
> 10
> >> 0 0 46 38 764 PCI-MSI 1572865-edge ens1f0-TxRx-1
> >> 36: 53 0 0 64 15 85 132 71 108 0
> >> 30 0 165 215 303 104 PCI-MSI 1572866-edge ens1f0-
> >> TxRx-2
> >> 37: 46 196 0 0 10 48 62 68 51 0
> 0
> >> 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3
> >> 38: 226 0 0 0 159 145 749 265 0 0
> >> 202 0 69229 166 450 0 PCI-MSI 1572868-edge ens1f0
> >> 52: 95 896 0 0 0 18 53 0 494 0
> 0
> >> 0 0 265 79 124 PCI-MSI 1574912-edge ens1f1-TxRx-0
> >> 53: 50 0 18 0 72 33 0 168 330 0
> 0
> >> 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1
> >> 54: 65 0 0 0 239 104 166 49 442 0
> >> 0 0 126 26 307 0 PCI-MSI 1574914-edge ens1f1-
> TxRx-2
> >> 55: 57 0 0 0 123 35 83 54 157 106
> >> 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-
> TxRx-3
> >> 56: 232 0 13910 0 16 21 0 54422 0 0
> >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
> >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
> >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
> >> 34: 88 0 0 0 0 41 30 509 0 0
> 350
> >> 24 88 119 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0
> >> 35: 49 24 0 0 65 130 64 29 67 0
> 10
> >> 0 0 46 38 771 PCI-MSI 1572865-edge ens1f0-TxRx-1
> >> 36: 53 0 0 64 15 85 132 71 108 0
> >> 30 0 165 215 303 113 PCI-MSI 1572866-edge ens1f0-
> >> TxRx-2
> >> 37: 46 196 0 0 10 48 62 68 56 0
> 0
> >> 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3
> >> 38: 226 0 0 0 159 145 749 265 0 0
> >> 202 0 71281 166 450 0 PCI-MSI 1572868-edge ens1f0
> >> 52: 95 896 0 0 0 18 53 0 494 0
> 0
> >> 0 0 265 79 133 PCI-MSI 1574912-edge ens1f1-TxRx-0
> >> 53: 50 0 18 0 72 33 0 173 330 0
> 0
> >> 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1
> >> 54: 65 0 0 0 239 104 166 49 442 0
> >> 0 0 126 26 312 0 PCI-MSI 1574914-edge ens1f1-
> TxRx-2
> >> 55: 57 0 0 0 123 35 83 59 157 106
> >> 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-
> TxRx-3
> >> 56: 232 0 15910 0 16 21 0 54422 0 0
> >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
> >>
> >> During the 10s interval, CPU2 jumped by 2000 interrupts, CPU12 by
> >> 2051 interrupts, for about 200 interrupts/second. That's on the order
> >> of what we expect. I would have guessed 100/s but perhaps there are
> >> two mailbox messages.
> >>
> >> With the patch:
> >>
> >> $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f'
> >> /proc/interrupts
> >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
> >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
> >> 34: 88 0 0 0 0 25 19 177 0 0
> 350
> >> 24 88 100 362 559 PCI-MSI 1572864-edge ens1f0-TxRx-0
> >> 35: 49 19 0 0 65 130 64 29 67 0
> 10
> >> 0 0 46 38 543 PCI-MSI 1572865-edge ens1f0-TxRx-1
> >> 36: 53 0 0 64 15 53 85 71 108 0
> 24
> >> 0 85 215 292 31 PCI-MSI 1572866-edge ens1f0-TxRx-2
> >> 37: 46 196 0 0 10 43 57 39 19 0
> 0
> >> 0 78 69 49 149 PCI-MSI 1572867-edge ens1f0-TxRx-3
> >> 38: 226 0 0 0 159 145 749 247 0 0
> >> 202 0 58250 0 450 0 PCI-MSI 1572868-edge ens1f0
> >> 52: 95 896 0 0 0 18 53 0 189 0
> 0
> >> 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0
> >> 53: 50 0 18 0 72 33 0 90 330 0
> 0
> >> 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1
> >> 54: 65 0 0 0 10 104 166 49 442 0
> 0
> >> 0 126 26 226 0 PCI-MSI 1574914-edge ens1f1-TxRx-2
> >> 55: 57 0 0 0 61 35 83 30 157 101
> 0
> >> 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3
> >> 56: 232 0 2062 0 16 21 0 54422 0 0
> >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
> >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
> >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
> >> 34: 88 0 0 0 0 25 19 177 0 0
> 350
> >> 24 88 102 362 562 PCI-MSI 1572864-edge ens1f0-TxRx-0
> >> 35: 49 19 0 0 65 130 64 29 67 0
> 10
> >> 0 0 46 38 548 PCI-MSI 1572865-edge ens1f0-TxRx-1
> >> 36: 53 0 0 64 15 53 85 71 108 0
> 24
> >> 0 85 215 292 36 PCI-MSI 1572866-edge ens1f0-TxRx-2
> >> 37: 46 196 0 0 10 45 57 39 19 0
> 0
> >> 0 78 69 49 152 PCI-MSI 1572867-edge ens1f0-TxRx-3
> >> 38: 226 0 0 0 159 145 749 247 0 0
> >> 202 0 58259 0 450 0 PCI-MSI 1572868-edge ens1f0
> >> 52: 95 896 0 0 0 18 53 0 194 0
> 0
> >> 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0
> >> 53: 50 0 18 0 72 33 0 95 330 0
> 0
> >> 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1
> >> 54: 65 0 0 0 10 104 166 49 442 0
> 0
> >> 0 126 26 231 0 PCI-MSI 1574914-edge ens1f1-TxRx-2
> >> 55: 57 0 0 0 66 35 83 30 157 101
> 0
> >> 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3
> >> 56: 232 0 2071 0 16 21 0 54422 0 0
> >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
> >>
> >> Note the interrupt rate has gone way down. During the 10s interval,
> >> we only saw a handful of interrupts.
> >>
> >> Note that this patch was originally provided by Intel directly to
> >> AT&T and Vyatta, but unfortunately I am unable to find records of the
> exact author.
> >>
> >> We have been using this in production for more than a year.
> >>
> >> Fixes: af75078fece3 ("first public release")
> >> Cc: stable@dpdk.org
> >>
> >> Signed-off-by: Luca Boccassi <bluca@debian.org>
> >> ---
> >> drivers/net/ixgbe/base/ixgbe_vf.c | 33 ++++++++++++++++---------------
> >> 1 file changed, 17 insertions(+), 16 deletions(-)
> >>
> >> diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c
> >> b/drivers/net/ixgbe/base/ixgbe_vf.c
> >> index 5b25a6b4d4..16086670b1 100644
> >> --- a/drivers/net/ixgbe/base/ixgbe_vf.c
> >> +++ b/drivers/net/ixgbe/base/ixgbe_vf.c
> >> @@ -586,7 +586,6 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw
> *hw,
> >> ixgbe_link_speed *speed,
> >> s32 ret_val = IXGBE_SUCCESS;
> >> u32 links_reg;
> >> u32 in_msg = 0;
> >> - UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
> >>
> >> /* If we were hit with a reset drop the link */
> >> if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) @@ -643,23
> >> +642,25 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw,
> >> ixgbe_link_speed *speed,
> >> *speed = IXGBE_LINK_SPEED_UNKNOWN;
> >> }
> >>
> >> - /* if the read failed it could just be a mailbox collision, best wait
> >> - * until we are called again and don't report an error
> >> - */
> >> - if (mbx->ops.read(hw, &in_msg, 1, 0))
> >> - goto out;
> >> + if (autoneg_wait_to_complete) {
> >> + /* if the read failed it could just be a mailbox collision, best
> >> wait
> >> + * until we are called again and don't report an error
> >> + */
> >> + if (mbx->ops.read(hw, &in_msg, 1, 0))
> >> + goto out;
> >>
> >> - if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
> >> - /* msg is not CTS and is NACK we must have lost CTS status
> >> */
> >> - if (in_msg & IXGBE_VT_MSGTYPE_NACK)
> >> + if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
> >> + /* msg is not CTS and is NACK we must have lost CTS
> >> status */
> >> + if (in_msg & IXGBE_VT_MSGTYPE_NACK)
> >> + ret_val = -1;
> >> + goto out;
> >> + }
> >> +
> >> + /* the pf is talking, if we timed out in the past we reinit */
> >> + if (!mbx->timeout) {
> >> ret_val = -1;
> >> - goto out;
> >> - }
> >> -
> >> - /* the pf is talking, if we timed out in the past we reinit */
> >> - if (!mbx->timeout) {
> >> - ret_val = -1;
> >> - goto out;
> >> + goto out;
> >> + }
> >> }
> >>
> >> /* if we passed all the tests above then the link is up and we no
> >> --
> >> 2.18.0
> >
prev parent reply other threads:[~2018-11-08 3:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-15 14:14 Luca Boccassi
2018-09-26 10:21 ` Luca Boccassi
2018-11-07 9:17 ` Zhao1, Wei
2018-11-07 18:54 ` Chas Williams
2018-11-07 19:10 ` Luca Boccassi
2018-11-08 2:55 ` Zhao1, Wei
2018-11-08 2:58 ` Zhao1, Wei [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=A2573D2ACFCADC41BB3BE09C6DE313CA07E69E3E@PGSMSX103.gar.corp.intel.com \
--to=wei.zhao1@intel.com \
--cc=3chas3@gmail.com \
--cc=bluca@debian.org \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=stable@dpdk.org \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).