From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "stable@dpdk.org" <stable@dpdk.org>,
"Lu, Wenzhuo" <wenzhuo.lu@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2 2/3] net/ixgbe: enable promiscuous mode on PF host
Date: Wed, 13 Feb 2019 03:42:44 +0000 [thread overview]
Message-ID: <A2573D2ACFCADC41BB3BE09C6DE313CA07EB2030@PGSMSX103.gar.corp.intel.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E7061153333BE7@SHSMSX103.ccr.corp.intel.com>
> -----Original Message-----
> From: Zhang, Qi Z
> Sent: Wednesday, February 13, 2019 11:42 AM
> To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org
> Cc: stable@dpdk.org; Lu, Wenzhuo <wenzhuo.lu@intel.com>
> Subject: RE: [PATCH v2 2/3] net/ixgbe: enable promiscuous mode on PF host
>
>
>
> > -----Original Message-----
> > From: Zhao1, Wei
> > Sent: Wednesday, January 16, 2019 1:02 PM
> > To: dev@dpdk.org
> > Cc: stable@dpdk.org; Lu, Wenzhuo <wenzhuo.lu@intel.com>; Zhang, Qi Z
> > <qi.z.zhang@intel.com>; Zhao1, Wei <wei.zhao1@intel.com>
> > Subject: [PATCH v2 2/3] net/ixgbe: enable promiscuous mode on PF host
> >
>
> The title is misleading, we are going to support VF's promiscuous mode but
> not PF.
>
> How about "Add VF promiscuous mode support when PF as host"
Get, update in v3
>
> > There is need to PF host promiscuous mode enable. For ixgbe, in order
> > to support VF vlan promiscuous or unicast promiscuous, we need to set
> > PF host register PFVML2FLT of bit UPE and VPE.
> > It also align to ixgbe kernel code version 5.5.3.
> >
> > Fixes: 72dec9e37a84 ("ixgbe: support multicast promiscuous mode on
> > VF")
>
> Same to previous patch, not a fix.
> >
> > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > ---
> > drivers/net/ixgbe/ixgbe_ethdev.h | 1 +
> > drivers/net/ixgbe/ixgbe_pf.c | 78
> > ++++++++++++++++++++++++++++------------
> > 2 files changed, 57 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h
> > b/drivers/net/ixgbe/ixgbe_ethdev.h
> > index d0b9396..e81f152 100644
> > --- a/drivers/net/ixgbe/ixgbe_ethdev.h
> > +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
> > @@ -265,6 +265,7 @@ struct ixgbe_vf_info {
> > uint8_t spoofchk_enabled;
> > uint8_t api_version;
> > uint16_t switch_domain_id;
> > + uint16_t xcast_mode;
> > };
> >
> > /*
> > diff --git a/drivers/net/ixgbe/ixgbe_pf.c
> > b/drivers/net/ixgbe/ixgbe_pf.c index 4b833ff..c9d1a1c 100644
> > --- a/drivers/net/ixgbe/ixgbe_pf.c
> > +++ b/drivers/net/ixgbe/ixgbe_pf.c
> > @@ -408,23 +408,6 @@ ixgbe_vf_reset_msg(struct rte_eth_dev *dev,
> > uint16_t
> > vf) }
> >
> > static int
> > -ixgbe_enable_vf_mc_promisc(struct rte_eth_dev *dev, uint32_t vf) -{
> > - struct ixgbe_hw *hw =
> > IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > - uint32_t vmolr;
> > -
> > - vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
> > -
> > - RTE_LOG(INFO, PMD, "VF %u: enabling multicast promiscuous\n", vf);
> > -
> > - vmolr |= IXGBE_VMOLR_MPE;
> > -
> > - IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
> > -
> > - return 0;
> > -}
> > -
> > -static int
> > ixgbe_disable_vf_mc_promisc(struct rte_eth_dev *dev, uint32_t vf) {
> > struct ixgbe_hw *hw =
> > IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > @@ -688,19 +671,70 @@ ixgbe_set_vf_mc_promisc(struct rte_eth_dev
> *dev,
> > uint32_t vf, uint32_t *msgbuf) {
> > struct ixgbe_vf_info *vfinfo =
> > *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
> >dev_private));
> > - bool enable = !!msgbuf[1]; /* msgbuf contains the flag to enable
> */
> > + struct ixgbe_hw *hw =
> > IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > + int xcast_mode = msgbuf[1]; /* msgbuf contains the flag to enable
> */
> > + u32 vmolr, fctrl, disable, enable;
> >
> > switch (vfinfo[vf].api_version) {
> > case ixgbe_mbox_api_12:
> > + /* promisc introduced in 1.3 version */
> > + if (xcast_mode == IXGBEVF_XCAST_MODE_PROMISC)
> > + return -EOPNOTSUPP;
> > + break;
> > + /* Fall threw */
> > + case ixgbe_mbox_api_13:
> > break;
> > default:
> > return -1;
> > }
> >
> > - if (enable)
> > - return ixgbe_enable_vf_mc_promisc(dev, vf);
> > - else
> > - return ixgbe_disable_vf_mc_promisc(dev, vf);
> > + if (vfinfo[vf].xcast_mode == xcast_mode)
> > + goto out;
> > +
> > + switch (xcast_mode) {
> > + case IXGBEVF_XCAST_MODE_NONE:
> > + disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
> > + IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE |
> > IXGBE_VMOLR_VPE;
> > + enable = 0;
> > + break;
> > + case IXGBEVF_XCAST_MODE_MULTI:
> > + disable = IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE |
> > IXGBE_VMOLR_VPE;
> > + enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE;
> > + break;
> > + case IXGBEVF_XCAST_MODE_ALLMULTI:
> > + disable = IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
> > + enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
> > IXGBE_VMOLR_MPE;
> > + break;
> > + case IXGBEVF_XCAST_MODE_PROMISC:
> > + if (hw->mac.type <= ixgbe_mac_82599EB)
> > + return -1;
> > +
> > + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
> > + if (!(fctrl & IXGBE_FCTRL_UPE)) {
> > + /* VF promisc requires PF in promisc */
> > + RTE_LOG(ERR, PMD,
> > + "Enabling VF promisc requires PF in promisc\n");
> > + return -1;
> > + }
> > +
> > + disable = 0;
> > + enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
> > + IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE |
> > IXGBE_VMOLR_VPE;
> > + break;
> > + default:
> > + return -1;
> > + }
> > +
> > + vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
> > + vmolr &= ~disable;
> > + vmolr |= enable;
> > + IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
> > + vfinfo[vf].xcast_mode = xcast_mode;
> > +
> > +out:
> > + msgbuf[1] = xcast_mode;
> > +
> > + return 0;
> > }
> >
> > static int
> > --
> > 2.7.5
next prev parent reply other threads:[~2019-02-13 3:42 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-16 4:42 [dpdk-dev] [PATCH 0/3] promiscuous mode enable on VF Wei Zhao
2019-01-16 4:42 ` [dpdk-dev] [PATCH 1/3] net/ixgbe: " Wei Zhao
2019-01-16 4:42 ` [dpdk-dev] [PATCH 2/3] net/ixgbe: enable promiscous mode on PF host Wei Zhao
2019-01-16 4:42 ` [dpdk-dev] [PATCH 3/3] net/ixgbe: update API version Wei Zhao
2019-01-16 5:01 ` [dpdk-dev] [PATCH v2 0/3] net/ixgbe: promiscuous mode enable on VF Wei Zhao
2019-01-16 5:01 ` [dpdk-dev] [PATCH v2 1/3] " Wei Zhao
2019-02-13 3:35 ` Zhang, Qi Z
2019-02-13 3:36 ` Zhao1, Wei
2019-01-16 5:01 ` [dpdk-dev] [PATCH v2 2/3] net/ixgbe: enable promiscuous mode on PF host Wei Zhao
2019-02-13 3:41 ` Zhang, Qi Z
2019-02-13 3:42 ` Zhao1, Wei [this message]
2019-01-16 5:02 ` [dpdk-dev] [PATCH v2 3/3] net/ixgbe: update API version Wei Zhao
2019-02-13 3:43 ` Zhang, Qi Z
2019-02-14 1:22 ` Zhao1, Wei
2019-02-13 7:18 ` [dpdk-dev] [PATCH v3 0/2] net/ixgbe: promiscuous mode enable on VF Wei Zhao
2019-02-13 7:18 ` [dpdk-dev] [PATCH v3 1/2] " Wei Zhao
2019-03-01 7:53 ` Zhang, Qi Z
2019-03-08 3:18 ` Zhao1, Wei
2019-02-13 7:18 ` [dpdk-dev] [PATCH v3 2/2] net/ixgbe: add VF promiscuous mode support when PF as host Wei Zhao
2019-03-08 2:46 ` [dpdk-dev] [PATCH v4 0/2] net/ixgbe: promiscuous mode enable on VF Wei Zhao
2019-03-08 2:46 ` [dpdk-dev] [PATCH v4 1/2] " Wei Zhao
2019-03-08 2:46 ` [dpdk-dev] [PATCH v4 2/2] net/ixgbe: add VF promiscuous mode support when PF as host Wei Zhao
2019-03-08 5:45 ` [dpdk-dev] [PATCH v4 0/2] net/ixgbe: promiscuous mode enable on VF Zhang, Qi Z
2019-01-16 8:28 ` [dpdk-dev] [PATCH 0/3] " David Marchand
2019-01-17 9:23 ` Zhao1, Wei
2019-01-16 18:59 ` Stephen Hemminger
2019-01-17 9:27 ` Zhao1, Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=A2573D2ACFCADC41BB3BE09C6DE313CA07EB2030@PGSMSX103.gar.corp.intel.com \
--to=wei.zhao1@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
--cc=stable@dpdk.org \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).