From: "Tone Zhang (Arm Technology China)" <Tone.Zhang@arm.com>
To: "Burakov, Anatoly" <anatoly.burakov@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: "Gavin Hu (Arm Technology China)" <Gavin.Hu@arm.com>,
Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>,
Steve Capper <Steve.Capper@arm.com>, nd <nd@arm.com>
Subject: Re: [dpdk-dev] [PATCH v3] pci_vfio: Support 64KB kernel page_size with vfio-pci driver
Date: Wed, 12 Dec 2018 10:48:42 +0000 [thread overview]
Message-ID: <AM0PR08MB3409770A956114A0BE47A7498FA70@AM0PR08MB3409.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <fcb5b839-a0e2-f023-51e9-0c7957068dd4@intel.com>
Hi Anatoly,
Thanks for the comments.
> -----Original Message-----
> From: Burakov, Anatoly <anatoly.burakov@intel.com>
> Sent: Monday, December 10, 2018 7:46 PM
> To: Tone Zhang (Arm Technology China) <Tone.Zhang@arm.com>;
> dev@dpdk.org
> Cc: Gavin Hu (Arm Technology China) <Gavin.Hu@arm.com>; Honnappa
> Nagarahalli <Honnappa.Nagarahalli@arm.com>; Steve Capper
> <Steve.Capper@arm.com>; nd <nd@arm.com>
> Subject: Re: [PATCH v3] pci_vfio: Support 64KB kernel page_size with vfio-pci
> driver
>
> On 19-Nov-18 2:37 AM, tone.zhang wrote:
> > With a larger PAGE_SIZE it is possible for the MSI table to very close
> > to the end of the BAR s.t. when we align the start and end of the MSI
> > table to the PAGE_SIZE, the end offset of the MSI table is out of the
> > PCI BAR boundary.
> >
> > This patch addresses the issue by comparing both the start and the end
> > offset of the MSI table with the BAR size, and skip the mapping if it
> > is out of Bar scope.
> >
> > The patch fixes the debug log as below:
> > EAL: Skipping BAR0
> >
> > Signed-off-by: tone.zhang <tone.zhang@arm.com>
> > Reviewed-by: Gavin Hu <Gavin.Hu@arm.com>
> > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> > Reviewed-by: Steve Capper <Steve.Capper@arm.com>
> > Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
> > ---
> > drivers/bus/pci/linux/pci_vfio.c | 27 ++++++++++++++++++++++-----
> > 1 file changed, 22 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/bus/pci/linux/pci_vfio.c
> > b/drivers/bus/pci/linux/pci_vfio.c
> > index ffd26f1..0e7bfd7 100644
> > --- a/drivers/bus/pci/linux/pci_vfio.c
> > +++ b/drivers/bus/pci/linux/pci_vfio.c
> > @@ -457,9 +457,11 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct
> mapped_pci_resource *vfio_res,
> > struct pci_msix_table *msix_table = &vfio_res->msix_table;
> > struct pci_map *bar = &vfio_res->maps[bar_index];
> >
> > - if (bar->size == 0)
> > + if (bar->size == 0) {
> > /* Skip this BAR */
> > + RTE_LOG(INFO, EAL, "Skipping BAR%d\n", bar_index);
> > return 0;
>
> I would perhaps make it a DEBUG rather than INFO.
Will update in v4 version soon.
>
> > + }
> >
> > if (msix_table->bar_index == bar_index) {
> > /*
> > @@ -468,8 +470,14 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct
> mapped_pci_resource *vfio_res,
> > */
> > uint32_t table_start = msix_table->offset;
> > uint32_t table_end = table_start + msix_table->size;
> > - table_end = (table_end + ~PAGE_MASK) & PAGE_MASK;
> > - table_start &= PAGE_MASK;
> > + table_end = RTE_ALIGN(table_end, PAGE_SIZE);
> > + table_start = RTE_ALIGN(table_start, PAGE_SIZE);
>
> I believe table_start &= PAGE_MASK is equivalent to table_start =
> RTE_ALIGN_FLOOR(), not RTE_ALIGN() (which is an alias for RTE_ALIGN_CEIL()).
Will change to RTE_ALIGN_FLOOR. Then table_start will be less than bar->size, the below code will be updated further in v4.
>
> > +
> > + /* If page-aligned start of MSI-X table is beyond BAR size,
> > + * shrink the mapping size to MSI-X table start address.
> > + */
> > + if (table_start >= bar->size)
> > + table_start = msix_table->offset;
> >
> > if (table_start == 0 && table_end >= bar->size) {
> > /* Cannot map this BAR */
> > @@ -481,8 +489,17 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct
> > mapped_pci_resource *vfio_res,
> >
> > memreg[0].offset = bar->offset;
> > memreg[0].size = table_start;
> > - memreg[1].offset = bar->offset + table_end;
> > - memreg[1].size = bar->size - table_end;
> > + if (bar->size < table_end) {
> > + /*
> > + * If MSI-X table end is beyond BAR end, don't attempt
> > + * to perform second mapping.
> > + */
> > + memreg[1].offset = 0;
> > + memreg[1].size = 0;
> > + } else {
> > + memreg[1].offset = bar->offset + table_end;
> > + memreg[1].size = bar->size - table_end;
> > + }
> >
> > RTE_LOG(DEBUG, EAL,
> > "Trying to map BAR%d that contains the MSI-X "
> >
>
>
> --
> Thanks,
> Anatoly
Thnaks!
Br,
Tone
next prev parent reply other threads:[~2018-12-12 10:48 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 2:20 [dpdk-dev] [PATCH] " tone.zhang
2018-10-24 9:09 ` Burakov, Anatoly
2018-11-01 2:33 ` Tone Zhang (Arm Technology China)
2018-11-01 10:01 ` Burakov, Anatoly
[not found] ` <DB7PR08MB33859242951014EF340C897AE9C80@DB7PR08MB3385.eurprd08.prod.outlook.com>
2018-11-03 5:46 ` Tone Zhang (Arm Technology China)
2018-11-06 11:03 ` Burakov, Anatoly
2018-11-07 4:55 ` Tone Zhang (Arm Technology China)
2018-11-07 10:12 ` Burakov, Anatoly
2018-11-08 0:45 ` Tone Zhang (Arm Technology China)
2018-11-09 5:57 ` [dpdk-dev] [PATCH v2] " tone.zhang
2018-11-09 12:15 ` Burakov, Anatoly
2018-11-15 0:49 ` Tone Zhang (Arm Technology China)
2018-11-16 2:34 ` Tone Zhang (Arm Technology China)
2018-11-16 10:36 ` Burakov, Anatoly
2018-11-19 2:37 ` [dpdk-dev] [PATCH v3] " tone.zhang
2018-12-03 7:25 ` Tone Zhang (Arm Technology China)
2018-12-10 11:40 ` Burakov, Anatoly
2018-12-10 11:45 ` Burakov, Anatoly
2018-12-10 15:55 ` Stephen Hemminger
2018-12-12 10:49 ` Tone Zhang (Arm Technology China)
2018-12-12 10:48 ` Tone Zhang (Arm Technology China) [this message]
2018-12-12 11:25 ` [dpdk-dev] [PATCH v4] " tone.zhang
2018-12-12 11:27 ` Burakov, Anatoly
2018-12-19 23:05 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR08MB3409770A956114A0BE47A7498FA70@AM0PR08MB3409.eurprd08.prod.outlook.com \
--to=tone.zhang@arm.com \
--cc=Gavin.Hu@arm.com \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=Steve.Capper@arm.com \
--cc=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
--cc=nd@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).