* [dpdk-dev] Mellanox dpdk issues
@ 2015-11-20 17:34 Sotiris Salloumis
2015-11-22 11:30 ` Gilad Berman
0 siblings, 1 reply; 5+ messages in thread
From: Sotiris Salloumis @ 2015-11-20 17:34 UTC (permalink / raw)
To: dev
Hi all,
I'm trying to build DPDK for Mellanox ( using MLNX_DPDK-2.1_1.1 ) but I get the following error following the guidelines i.e. make install T=x86_64-native-linuxapp-gcc
== Build lib/librte_eal/linuxapp/igb_uio
make[8]: *** /lib/modules/3.12.28-4-default/build: No such file or directory. Stop.
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.module.mk:79: recipe for target 'igb_uio.ko' failed
make[7]: *** [igb_uio.ko] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'igb_uio' failed
make[6]: *** [igb_uio] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'linuxapp' failed
make[5]: *** [linuxapp] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'librte_eal' failed
make[4]: *** [librte_eal] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkbuild.mk:93: recipe for target 'lib' failed
make[3]: *** [lib] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:124: recipe for target 'all' failed
make[2]: *** [all] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkinstall.mk:58: recipe for target 'x86_64-native-linuxapp-gcc_install' failed
make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:102: recipe for target 'install' failed
make: *** [install] Error 2
The environment is SLES12
- Linux linux-okj7 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) x86_64 x86_64 x86_64 GNU/Linux
- 3.12.28-4-default
>From Mellanox point of view the only difference I see is related with firmware version
---- Performing Adapter Device Self Test ----
Number of CAs Detected ................. 1
PCI Device Check ....................... PASS
Kernel Arch ............................ x86_64
Host Driver Version .................... MLNX_OFED_LINUX-3.1-1.0.3 (OFED-3.1-1.0.3): 3.12.28-4-default
Host Driver RPM Check .................. PASS
Firmware on CA #0 NIC .................. v2.35.5130
Firmware Check on CA #0 (NIC) .......... PASS
NOTE: The found fw version is higher than the fw included in this package (v2.35.5100)
Host Driver Initialization ............. PASS
Number of CA Ports Active .............. 2
Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet)
Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet)
Error Counter Check on CA #0 (NIC)...... NA (Eth ports)
Kernel Syslog Check .................... PASS
Node GUID on CA #0 (NIC) ............... a0:1d:48:03:00:b5:a6:17
------------------ DONE ---------------------
Any hints?
Thanks
Sotiris
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [dpdk-dev] Mellanox dpdk issues 2015-11-20 17:34 [dpdk-dev] Mellanox dpdk issues Sotiris Salloumis @ 2015-11-22 11:30 ` Gilad Berman 2015-11-22 13:45 ` Olga Shern 0 siblings, 1 reply; 5+ messages in thread From: Gilad Berman @ 2015-11-22 11:30 UTC (permalink / raw) To: Sotiris Salloumis, dev Let us check and get back to you. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Sotiris Salloumis Sent: Friday, November 20, 2015 7:35 PM To: dev@dpdk.org Subject: [dpdk-dev] Mellanox dpdk issues Hi all, I'm trying to build DPDK for Mellanox ( using MLNX_DPDK-2.1_1.1 ) but I get the following error following the guidelines i.e. make install T=x86_64-native-linuxapp-gcc == Build lib/librte_eal/linuxapp/igb_uio make[8]: *** /lib/modules/3.12.28-4-default/build: No such file or directory. Stop. /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.module.mk:79: recipe for target 'igb_uio.ko' failed make[7]: *** [igb_uio.ko] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'igb_uio' failed make[6]: *** [igb_uio] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'linuxapp' failed make[5]: *** [linuxapp] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'librte_eal' failed make[4]: *** [librte_eal] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkbuild.mk:93: recipe for target 'lib' failed make[3]: *** [lib] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:124: recipe for target 'all' failed make[2]: *** [all] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkinstall.mk:58: recipe for target 'x86_64-native-linuxapp-gcc_install' failed make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:102: recipe for target 'install' failed make: *** [install] Error 2 The environment is SLES12 - Linux linux-okj7 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) x86_64 x86_64 x86_64 GNU/Linux - 3.12.28-4-default >From Mellanox point of view the only difference I see is related with firmware version ---- Performing Adapter Device Self Test ---- Number of CAs Detected ................. 1 PCI Device Check ....................... PASS Kernel Arch ............................ x86_64 Host Driver Version .................... MLNX_OFED_LINUX-3.1-1.0.3 (OFED-3.1-1.0.3): 3.12.28-4-default Host Driver RPM Check .................. PASS Firmware on CA #0 NIC .................. v2.35.5130 Firmware Check on CA #0 (NIC) .......... PASS NOTE: The found fw version is higher than the fw included in this package (v2.35.5100) Host Driver Initialization ............. PASS Number of CA Ports Active .............. 2 Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Error Counter Check on CA #0 (NIC)...... NA (Eth ports) Kernel Syslog Check .................... PASS Node GUID on CA #0 (NIC) ............... a0:1d:48:03:00:b5:a6:17 ------------------ DONE --------------------- Any hints? Thanks Sotiris ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] Mellanox dpdk issues 2015-11-22 11:30 ` Gilad Berman @ 2015-11-22 13:45 ` Olga Shern 2015-11-23 10:38 ` Gilad Berman 0 siblings, 1 reply; 5+ messages in thread From: Olga Shern @ 2015-11-22 13:45 UTC (permalink / raw) To: Gilad Berman, Sotiris Salloumis, dev Hi Sotiris, You can disable compilation of igb_uio, this module is not needed for Mellanox PMD. Let me know if you have any question Best Regards, Olga -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Gilad Berman Sent: Sunday, November 22, 2015 1:30 PM To: Sotiris Salloumis <sotiris.salloumis@ericsson.com>; dev@dpdk.org Subject: Re: [dpdk-dev] Mellanox dpdk issues Let us check and get back to you. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Sotiris Salloumis Sent: Friday, November 20, 2015 7:35 PM To: dev@dpdk.org Subject: [dpdk-dev] Mellanox dpdk issues Hi all, I'm trying to build DPDK for Mellanox ( using MLNX_DPDK-2.1_1.1 ) but I get the following error following the guidelines i.e. make install T=x86_64-native-linuxapp-gcc == Build lib/librte_eal/linuxapp/igb_uio make[8]: *** /lib/modules/3.12.28-4-default/build: No such file or directory. Stop. /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.module.mk:79: recipe for target 'igb_uio.ko' failed make[7]: *** [igb_uio.ko] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'igb_uio' failed make[6]: *** [igb_uio] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'linuxapp' failed make[5]: *** [linuxapp] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'librte_eal' failed make[4]: *** [librte_eal] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkbuild.mk:93: recipe for target 'lib' failed make[3]: *** [lib] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:124: recipe for target 'all' failed make[2]: *** [all] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkinstall.mk:58: recipe for target 'x86_64-native-linuxapp-gcc_install' failed make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:102: recipe for target 'install' failed make: *** [install] Error 2 The environment is SLES12 - Linux linux-okj7 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) x86_64 x86_64 x86_64 GNU/Linux - 3.12.28-4-default >From Mellanox point of view the only difference I see is related with firmware version ---- Performing Adapter Device Self Test ---- Number of CAs Detected ................. 1 PCI Device Check ....................... PASS Kernel Arch ............................ x86_64 Host Driver Version .................... MLNX_OFED_LINUX-3.1-1.0.3 (OFED-3.1-1.0.3): 3.12.28-4-default Host Driver RPM Check .................. PASS Firmware on CA #0 NIC .................. v2.35.5130 Firmware Check on CA #0 (NIC) .......... PASS NOTE: The found fw version is higher than the fw included in this package (v2.35.5100) Host Driver Initialization ............. PASS Number of CA Ports Active .............. 2 Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Error Counter Check on CA #0 (NIC)...... NA (Eth ports) Kernel Syslog Check .................... PASS Node GUID on CA #0 (NIC) ............... a0:1d:48:03:00:b5:a6:17 ------------------ DONE --------------------- Any hints? Thanks Sotiris ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] Mellanox dpdk issues 2015-11-22 13:45 ` Olga Shern @ 2015-11-23 10:38 ` Gilad Berman 2015-11-23 22:30 ` Sotiris Salloumis 0 siblings, 1 reply; 5+ messages in thread From: Gilad Berman @ 2015-11-23 10:38 UTC (permalink / raw) To: Olga Shern, Sotiris Salloumis, dev Sotiris, I've compiled MLNX_DPDK-2.1_1.1 on SLES12 3.12.28-4-default with OFED 3.1-1.0.3 with no issues. Also, no modifications were required - simply follow the quick start guide here - http://www.mellanox.com/page/products_dyn?product_family=209&mtag=pmd_for_dpdk If you are still having issues please mail me directly and we'll sort it out. Thx. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: Olga Shern Sent: Sunday, November 22, 2015 3:45 PM To: Gilad Berman <giladb@mellanox.com>; Sotiris Salloumis <sotiris.salloumis@ericsson.com>; dev@dpdk.org Subject: RE: Mellanox dpdk issues Hi Sotiris, You can disable compilation of igb_uio, this module is not needed for Mellanox PMD. Let me know if you have any question Best Regards, Olga -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Gilad Berman Sent: Sunday, November 22, 2015 1:30 PM To: Sotiris Salloumis <sotiris.salloumis@ericsson.com>; dev@dpdk.org Subject: Re: [dpdk-dev] Mellanox dpdk issues Let us check and get back to you. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Sotiris Salloumis Sent: Friday, November 20, 2015 7:35 PM To: dev@dpdk.org Subject: [dpdk-dev] Mellanox dpdk issues Hi all, I'm trying to build DPDK for Mellanox ( using MLNX_DPDK-2.1_1.1 ) but I get the following error following the guidelines i.e. make install T=x86_64-native-linuxapp-gcc == Build lib/librte_eal/linuxapp/igb_uio make[8]: *** /lib/modules/3.12.28-4-default/build: No such file or directory. Stop. /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.module.mk:79: recipe for target 'igb_uio.ko' failed make[7]: *** [igb_uio.ko] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'igb_uio' failed make[6]: *** [igb_uio] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'linuxapp' failed make[5]: *** [linuxapp] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'librte_eal' failed make[4]: *** [librte_eal] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkbuild.mk:93: recipe for target 'lib' failed make[3]: *** [lib] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:124: recipe for target 'all' failed make[2]: *** [all] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkinstall.mk:58: recipe for target 'x86_64-native-linuxapp-gcc_install' failed make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:102: recipe for target 'install' failed make: *** [install] Error 2 The environment is SLES12 - Linux linux-okj7 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) x86_64 x86_64 x86_64 GNU/Linux - 3.12.28-4-default >From Mellanox point of view the only difference I see is related with firmware version ---- Performing Adapter Device Self Test ---- Number of CAs Detected ................. 1 PCI Device Check ....................... PASS Kernel Arch ............................ x86_64 Host Driver Version .................... MLNX_OFED_LINUX-3.1-1.0.3 (OFED-3.1-1.0.3): 3.12.28-4-default Host Driver RPM Check .................. PASS Firmware on CA #0 NIC .................. v2.35.5130 Firmware Check on CA #0 (NIC) .......... PASS NOTE: The found fw version is higher than the fw included in this package (v2.35.5100) Host Driver Initialization ............. PASS Number of CA Ports Active .............. 2 Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Error Counter Check on CA #0 (NIC)...... NA (Eth ports) Kernel Syslog Check .................... PASS Node GUID on CA #0 (NIC) ............... a0:1d:48:03:00:b5:a6:17 ------------------ DONE --------------------- Any hints? Thanks Sotiris ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] Mellanox dpdk issues 2015-11-23 10:38 ` Gilad Berman @ 2015-11-23 22:30 ` Sotiris Salloumis 0 siblings, 0 replies; 5+ messages in thread From: Sotiris Salloumis @ 2015-11-23 22:30 UTC (permalink / raw) To: Gilad Berman, Olga Shern, dev Hi all, For future reference problem root casue was missing package for the kernel version I was using. After doing zypper install kernel-default-devel-3.12.28-4.6.x86_64 Compilation worked fine. Thanks Mellanox team for the support. Regards Sotiris -----Original Message----- From: Gilad Berman [mailto:giladb@mellanox.com] Sent: Monday, November 23, 2015 11:38 AM To: Olga Shern; Sotiris Salloumis; dev@dpdk.org Subject: RE: Mellanox dpdk issues Sotiris, I've compiled MLNX_DPDK-2.1_1.1 on SLES12 3.12.28-4-default with OFED 3.1-1.0.3 with no issues. Also, no modifications were required - simply follow the quick start guide here - http://www.mellanox.com/page/products_dyn?product_family=209&mtag=pmd_for_dpdk If you are still having issues please mail me directly and we'll sort it out. Thx. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: Olga Shern Sent: Sunday, November 22, 2015 3:45 PM To: Gilad Berman <giladb@mellanox.com>; Sotiris Salloumis <sotiris.salloumis@ericsson.com>; dev@dpdk.org Subject: RE: Mellanox dpdk issues Hi Sotiris, You can disable compilation of igb_uio, this module is not needed for Mellanox PMD. Let me know if you have any question Best Regards, Olga -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Gilad Berman Sent: Sunday, November 22, 2015 1:30 PM To: Sotiris Salloumis <sotiris.salloumis@ericsson.com>; dev@dpdk.org Subject: Re: [dpdk-dev] Mellanox dpdk issues Let us check and get back to you. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Sotiris Salloumis Sent: Friday, November 20, 2015 7:35 PM To: dev@dpdk.org Subject: [dpdk-dev] Mellanox dpdk issues Hi all, I'm trying to build DPDK for Mellanox ( using MLNX_DPDK-2.1_1.1 ) but I get the following error following the guidelines i.e. make install T=x86_64-native-linuxapp-gcc == Build lib/librte_eal/linuxapp/igb_uio make[8]: *** /lib/modules/3.12.28-4-default/build: No such file or directory. Stop. /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.module.mk:79: recipe for target 'igb_uio.ko' failed make[7]: *** [igb_uio.ko] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'igb_uio' failed make[6]: *** [igb_uio] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'linuxapp' failed make[5]: *** [linuxapp] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'librte_eal' failed make[4]: *** [librte_eal] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkbuild.mk:93: recipe for target 'lib' failed make[3]: *** [lib] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:124: recipe for target 'all' failed make[2]: *** [all] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkinstall.mk:58: recipe for target 'x86_64-native-linuxapp-gcc_install' failed make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:102: recipe for target 'install' failed make: *** [install] Error 2 The environment is SLES12 - Linux linux-okj7 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) x86_64 x86_64 x86_64 GNU/Linux - 3.12.28-4-default >From Mellanox point of view the only difference I see is related with firmware version ---- Performing Adapter Device Self Test ---- Number of CAs Detected ................. 1 PCI Device Check ....................... PASS Kernel Arch ............................ x86_64 Host Driver Version .................... MLNX_OFED_LINUX-3.1-1.0.3 (OFED-3.1-1.0.3): 3.12.28-4-default Host Driver RPM Check .................. PASS Firmware on CA #0 NIC .................. v2.35.5130 Firmware Check on CA #0 (NIC) .......... PASS NOTE: The found fw version is higher than the fw included in this package (v2.35.5100) Host Driver Initialization ............. PASS Number of CA Ports Active .............. 2 Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Error Counter Check on CA #0 (NIC)...... NA (Eth ports) Kernel Syslog Check .................... PASS Node GUID on CA #0 (NIC) ............... a0:1d:48:03:00:b5:a6:17 ------------------ DONE --------------------- Any hints? Thanks Sotiris ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-11-23 22:30 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-11-20 17:34 [dpdk-dev] Mellanox dpdk issues Sotiris Salloumis 2015-11-22 11:30 ` Gilad Berman 2015-11-22 13:45 ` Olga Shern 2015-11-23 10:38 ` Gilad Berman 2015-11-23 22:30 ` Sotiris Salloumis
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).