DPDK patches and discussions
 help / color / mirror / Atom feed
From: Gagandeep Singh <G.Singh@nxp.com>
To: Volodymyr Fialko <vfialko@marvell.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	Radu Nicolau <radu.nicolau@intel.com>,
	Akhil Goyal <gakhil@marvell.com>
Cc: "jerinj@marvell.com" <jerinj@marvell.com>,
	"anoobj@marvell.com" <anoobj@marvell.com>
Subject: RE: [PATCH 3/6] examples/ipsec-secgw: add lookaside event mode
Date: Thu, 22 Sep 2022 05:05:21 +0000	[thread overview]
Message-ID: <AS8PR04MB81988BFE6482B8BA186DB2C3E14E9@AS8PR04MB8198.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20220804103626.102688-4-vfialko@marvell.com>

Hi Volodymyr,

I found these patches do not support "RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND" capability in ipsec-secgw application. Will you also plan to add this support? 

> -----Original Message-----
> From: Volodymyr Fialko <vfialko@marvell.com>
> Sent: Thursday, August 4, 2022 4:06 PM
> To: dev@dpdk.org; Radu Nicolau <radu.nicolau@intel.com>; Akhil Goyal
> <gakhil@marvell.com>
> Cc: jerinj@marvell.com; anoobj@marvell.com; Volodymyr Fialko
> <vfialko@marvell.com>
> Subject: [PATCH 3/6] examples/ipsec-secgw: add lookaside event mode
> 
> Add base support for lookaside event mode. Events that are coming from
> ethdev will be enqueued to the event crypto adapter, processed and
> enqueued back to ethdev for the transmission.
> 
> Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
> ---
>  doc/guides/sample_app_ug/ipsec_secgw.rst |   4 +-
>  examples/ipsec-secgw/ipsec-secgw.c       |   3 +-
>  examples/ipsec-secgw/ipsec.c             |  35 +++-
>  examples/ipsec-secgw/ipsec.h             |   8 +-
>  examples/ipsec-secgw/ipsec_worker.c      | 224 +++++++++++++++++++++--
>  examples/ipsec-secgw/sa.c                |  23 ++-
>  6 files changed, 262 insertions(+), 35 deletions(-)
> 
> diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst
> b/doc/guides/sample_app_ug/ipsec_secgw.rst
> index 07686d2285..c7b87889f1 100644
> --- a/doc/guides/sample_app_ug/ipsec_secgw.rst
> +++ b/doc/guides/sample_app_ug/ipsec_secgw.rst
> @@ -83,8 +83,8 @@ The application supports two modes of operation: poll
> mode and event mode.
>    every type of event device without affecting existing paths/use cases. The
> worker
>    to be used will be determined by the operating conditions and the
> underlying device
>    capabilities. **Currently the application provides non-burst, internal port
> worker
> -  threads and supports inline protocol only.** It also provides infrastructure
> for
> -  non-internal port however does not define any worker threads.
> +  threads.** It also provides infrastructure for non-internal port
> + however does not  define any worker threads.
> 
>    Event mode also supports event vectorization. The event devices, ethernet
> device
>    pairs which support the capability
> ``RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR`` can diff --git
> a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-
> secgw.c
> index 4ca5936bdf..0bd1f15ae5 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -3121,7 +3121,8 @@ main(int32_t argc, char **argv)
>  		if ((socket_ctx[socket_id].session_pool != NULL) &&
>  			(socket_ctx[socket_id].sa_in == NULL) &&
>  			(socket_ctx[socket_id].sa_out == NULL)) {
> -			sa_init(&socket_ctx[socket_id], socket_id,
> lcore_conf);
> +			sa_init(&socket_ctx[socket_id], socket_id,
> lcore_conf,
> +				eh_conf->mode_params);
>  			sp4_init(&socket_ctx[socket_id], socket_id);
>  			sp6_init(&socket_ctx[socket_id], socket_id);
>  			rt_init(&socket_ctx[socket_id], socket_id); diff --git
> a/examples/ipsec-secgw/ipsec.c b/examples/ipsec-secgw/ipsec.c index
> 7b7bfff696..030cfe7a82 100644
> --- a/examples/ipsec-secgw/ipsec.c
> +++ b/examples/ipsec-secgw/ipsec.c
> @@ -6,6 +6,7 @@
>  #include <netinet/ip.h>
> 
>  #include <rte_branch_prediction.h>
> +#include <rte_event_crypto_adapter.h>
>  #include <rte_log.h>
>  #include <rte_crypto.h>
>  #include <rte_security.h>
> @@ -56,14 +57,17 @@ set_ipsec_conf(struct ipsec_sa *sa, struct
> rte_security_ipsec_xform *ipsec)
> 
>  int
>  create_lookaside_session(struct ipsec_ctx *ipsec_ctx_lcore[],
> -	struct socket_ctx *skt_ctx, struct ipsec_sa *sa,
> -	struct rte_ipsec_session *ips)
> +	struct socket_ctx *skt_ctx, const struct eventmode_conf *em_conf,
> +	struct ipsec_sa *sa, struct rte_ipsec_session *ips)
>  {
>  	uint16_t cdev_id = RTE_CRYPTO_MAX_DEVS;
> +	enum rte_crypto_op_sess_type sess_type;
>  	struct rte_cryptodev_info cdev_info;
> +	enum rte_crypto_op_type op_type;
>  	unsigned long cdev_id_qp = 0;
> -	struct cdev_key key = { 0 };
>  	struct ipsec_ctx *ipsec_ctx;
> +	struct cdev_key key = { 0 };
> +	void *sess = NULL;
>  	uint32_t lcore_id;
>  	int32_t ret = 0;
> 
> @@ -159,6 +163,10 @@ create_lookaside_session(struct ipsec_ctx
> *ipsec_ctx_lcore[],
>  				return -1;
>  			}
>  			ips->security.ctx = ctx;
> +
> +			sess = ips->security.ses;
> +			op_type = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
> +			sess_type = RTE_CRYPTO_OP_SECURITY_SESSION;
>  		} else {
>  			RTE_LOG(ERR, IPSEC, "Inline not supported\n");
>  			return -1;
> @@ -183,6 +191,27 @@ create_lookaside_session(struct ipsec_ctx
> *ipsec_ctx_lcore[],
>  		rte_cryptodev_info_get(cdev_id, &cdev_info);
>  	}
> 
> +	/* Setup meta data required by event crypto adapter */
> +	if (em_conf->enable_event_crypto_adapter && sess != NULL) {
> +		union rte_event_crypto_metadata m_data = {0};
> +		const struct eventdev_params *eventdev_conf;
> +
> +		eventdev_conf = &(em_conf->eventdev_config[0]);
> +
> +		/* Fill in response information */
> +		m_data.response_info.sched_type = em_conf-
> >ext_params.sched_type;
> +		m_data.response_info.op = RTE_EVENT_OP_NEW;
> +		m_data.response_info.queue_id = eventdev_conf-
> >ev_cpt_queue_id;
> +
> +		/* Fill in request information */
> +		m_data.request_info.cdev_id = cdev_id;
> +		m_data.request_info.queue_pair_id = 0;
> +
> +		/* Attach meta info to session */
> +		rte_cryptodev_session_event_mdata_set(cdev_id, sess,
> op_type,
> +				sess_type, &m_data, sizeof(m_data));
> +	}
> +
>  	return 0;
>  }
> 
> diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
> index 2005ae8fec..5ef63e8fc4 100644
> --- a/examples/ipsec-secgw/ipsec.h
> +++ b/examples/ipsec-secgw/ipsec.h
> @@ -14,6 +14,7 @@
>  #include <rte_flow.h>
>  #include <rte_ipsec.h>
> 
> +#include "event_helper.h"
>  #include "ipsec-secgw.h"
> 
>  #define RTE_LOGTYPE_IPSEC_ESP   RTE_LOGTYPE_USER2
> @@ -424,7 +425,8 @@ sa_spi_present(struct sa_ctx *sa_ctx, uint32_t spi,
> int inbound);
> 
>  void
>  sa_init(struct socket_ctx *ctx, int32_t socket_id,
> -		struct lcore_conf *lcore_conf);
> +	struct lcore_conf *lcore_conf,
> +	const struct eventmode_conf *em_conf);
> 
>  void
>  rt_init(struct socket_ctx *ctx, int32_t socket_id); @@ -441,8 +443,8 @@
> enqueue_cop_burst(struct cdev_qp *cqp);
> 
>  int
>  create_lookaside_session(struct ipsec_ctx *ipsec_ctx[],
> -	struct socket_ctx *skt_ctx, struct ipsec_sa *sa,
> -	struct rte_ipsec_session *ips);
> +	struct socket_ctx *skt_ctx, const struct eventmode_conf *em_conf,
> +	struct ipsec_sa *sa, struct rte_ipsec_session *ips);
> 
>  int
>  create_inline_session(struct socket_ctx *skt_ctx, struct ipsec_sa *sa, diff --
> git a/examples/ipsec-secgw/ipsec_worker.c b/examples/ipsec-
> secgw/ipsec_worker.c
> index 803157d8ee..2661f0275f 100644
> --- a/examples/ipsec-secgw/ipsec_worker.c
> +++ b/examples/ipsec-secgw/ipsec_worker.c
> @@ -3,6 +3,7 @@
>   * Copyright (C) 2020 Marvell International Ltd.
>   */
>  #include <rte_acl.h>
> +#include <rte_event_crypto_adapter.h>
>  #include <rte_event_eth_tx_adapter.h>
>  #include <rte_lpm.h>
>  #include <rte_lpm6.h>
> @@ -11,6 +12,7 @@
>  #include "ipsec.h"
>  #include "ipsec-secgw.h"
>  #include "ipsec_worker.h"
> +#include "sad.h"
> 
>  #if defined(__ARM_NEON)
>  #include "ipsec_lpm_neon.h"
> @@ -228,6 +230,43 @@ check_sp_sa_bulk(struct sp_ctx *sp, struct sa_ctx
> *sa_ctx,
>  	ip->num = j;
>  }
> 
> +static inline void
> +pkt_l3_len_set(struct rte_mbuf *pkt)
> +{
> +	struct rte_ipv4_hdr *ipv4;
> +	struct rte_ipv6_hdr *ipv6;
> +	size_t l3len, ext_len;
> +	uint32_t l3_type;
> +	int next_proto;
> +	uint8_t *p;
> +
> +	l3_type = pkt->packet_type & RTE_PTYPE_L3_MASK;
> +	if (l3_type == RTE_PTYPE_L3_IPV4) {
> +		ipv4 = rte_pktmbuf_mtod(pkt, struct rte_ipv4_hdr *);
> +		pkt->l3_len = ipv4->ihl * 4;
> +	} else if (l3_type & RTE_PTYPE_L3_IPV6) {
> +		ipv6 = rte_pktmbuf_mtod(pkt, struct rte_ipv6_hdr *);
> +		l3len = sizeof(struct rte_ipv6_hdr);
> +		if (l3_type == RTE_PTYPE_L3_IPV6_EXT ||
> +		     l3_type == RTE_PTYPE_L3_IPV6_EXT_UNKNOWN) {
> +			p = rte_pktmbuf_mtod(pkt, uint8_t *);
> +			next_proto = ipv6->proto;
> +			while (next_proto != IPPROTO_ESP &&
> +			       l3len < pkt->data_len &&
> +			       (next_proto = rte_ipv6_get_next_ext(p + l3len,
> +						next_proto, &ext_len)) >= 0)
> +				l3len += ext_len;
> +
> +			/* Drop pkt when IPv6 header exceeds first seg size
> */
> +			if (unlikely(l3len > pkt->data_len)) {
> +				free_pkts(&pkt, 1);
> +				return;
> +			}
> +		}
> +		pkt->l3_len = l3len;
> +	}
> +}
> +
>  static inline uint16_t
>  route4_pkt(struct rte_mbuf *pkt, struct rt_ctx *rt_ctx)  { @@ -287,9 +326,67
> @@ get_route(struct rte_mbuf *pkt, struct route_table *rt, enum pkt_type
> type)
>  	return RTE_MAX_ETHPORTS;
>  }
> 
> +static inline void
> +crypto_op_reset(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
> +		struct rte_crypto_op *cop[], uint16_t num) {
> +	struct rte_crypto_sym_op *sop;
> +	uint32_t i;
> +
> +	const struct rte_crypto_op unproc_cop = {
> +		.type = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> +		.status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED,
> +		.sess_type = RTE_CRYPTO_OP_SECURITY_SESSION,
> +	};
> +
> +	for (i = 0; i != num; i++) {
> +		cop[i]->raw = unproc_cop.raw;
> +		sop = cop[i]->sym;
> +		sop->m_src = mb[i];
> +		sop->m_dst = NULL;
> +		__rte_security_attach_session(sop, ss->security.ses);
> +	}
> +}
> +
> +static inline int
> +event_crypto_enqueue(struct ipsec_ctx *ctx __rte_unused, struct rte_mbuf
> *pkt,
> +		struct ipsec_sa *sa, const struct eh_event_link_info *ev_link)
> {
> +	struct ipsec_mbuf_metadata *priv;
> +	struct rte_ipsec_session *sess;
> +	struct rte_crypto_op *cop;
> +	struct rte_event cev;
> +	int ret;
> +
> +	/* Get IPsec session */
> +	sess = ipsec_get_primary_session(sa);
> +
> +	/* Get pkt private data */
> +	priv = get_priv(pkt);
> +	cop = &priv->cop;
> +
> +	/* Reset crypto operation data */
> +	crypto_op_reset(sess, &pkt, &cop, 1);
> +
> +	/* Update event_ptr with rte_crypto_op */
> +	cev.event = 0;
> +	cev.event_ptr = cop;
> +
> +	/* Enqueue event to crypto adapter */
> +	ret = rte_event_crypto_adapter_enqueue(ev_link->eventdev_id,
> +			ev_link->event_port_id, &cev, 1);
> +	if (unlikely(ret <= 0)) {
> +		/* pkt will be freed by the caller */
> +		RTE_LOG_DP(DEBUG, IPSEC, "Cannot enqueue event: %i
> (errno: %i)\n", ret, rte_errno);
> +		return rte_errno;
> +	}
> +
> +	return 0;
> +}
> +
>  static inline int
>  process_ipsec_ev_inbound(struct ipsec_ctx *ctx, struct route_table *rt,
> -		struct rte_event *ev)
> +	const struct eh_event_link_info *ev_link, struct rte_event *ev)
>  {
>  	struct ipsec_sa *sa = NULL;
>  	struct rte_mbuf *pkt;
> @@ -340,7 +437,22 @@ process_ipsec_ev_inbound(struct ipsec_ctx *ctx,
> struct route_table *rt,
>  			goto drop_pkt_and_exit;
>  		}
>  		break;
> +	case PKT_TYPE_IPSEC_IPV4:
> +	case PKT_TYPE_IPSEC_IPV6:
> +		rte_pktmbuf_adj(pkt, RTE_ETHER_HDR_LEN);
> +		pkt_l3_len_set(pkt);
> +
> +		sad_lookup(&ctx->sa_ctx->sad, &pkt, (void **)&sa, 1);
> +		sa = ipsec_mask_saptr(sa);
> +		if (unlikely(sa == NULL)) {
> +			RTE_LOG_DP(DEBUG, IPSEC, "Cannot find sa\n");
> +			goto drop_pkt_and_exit;
> +		}
> 
> +		if (unlikely(event_crypto_enqueue(ctx, pkt, sa, ev_link)))
> +			goto drop_pkt_and_exit;
> +
> +		return PKT_POSTED;
>  	default:
>  		RTE_LOG_DP(DEBUG, IPSEC_ESP, "Unsupported packet type
> = %d\n",
>  			   type);
> @@ -389,7 +501,7 @@ process_ipsec_ev_inbound(struct ipsec_ctx *ctx,
> struct route_table *rt,
> 
>  static inline int
>  process_ipsec_ev_outbound(struct ipsec_ctx *ctx, struct route_table *rt,
> -		struct rte_event *ev)
> +		const struct eh_event_link_info *ev_link, struct rte_event
> *ev)
>  {
>  	struct rte_ipsec_session *sess;
>  	struct sa_ctx *sa_ctx;
> @@ -456,11 +568,9 @@ process_ipsec_ev_outbound(struct ipsec_ctx *ctx,
> struct route_table *rt,
>  	/* Get IPsec session */
>  	sess = ipsec_get_primary_session(sa);
> 
> -	/* Allow only inline protocol for now */
> -	if (unlikely(sess->type !=
> RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)) {
> -		RTE_LOG(ERR, IPSEC, "SA type not supported\n");
> -		goto drop_pkt_and_exit;
> -	}
> +	/* Determine protocol type */
> +	if (sess->type ==
> RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL)
> +		goto lookaside;
> 
>  	rte_security_set_pkt_metadata(sess->security.ctx,
>  				      sess->security.ses, pkt, NULL); @@ -
> 482,6 +592,13 @@ process_ipsec_ev_outbound(struct ipsec_ctx *ctx, struct
> route_table *rt,
>  	ipsec_event_pre_forward(pkt, port_id);
>  	return PKT_FORWARDED;
> 
> +lookaside:
> +	/* prepare pkt - advance start to L3 */
> +	rte_pktmbuf_adj(pkt, RTE_ETHER_HDR_LEN);
> +
> +	if (likely(event_crypto_enqueue(ctx, pkt, sa, ev_link) == 0))
> +		return PKT_POSTED;
> +
>  drop_pkt_and_exit:
>  	RTE_LOG(ERR, IPSEC, "Outbound packet dropped\n");
>  	rte_pktmbuf_free(pkt);
> @@ -737,6 +854,67 @@ ipsec_ev_vector_drv_mode_process(struct
> eh_event_link_info *links,
>  		rte_mempool_put(rte_mempool_from_obj(vec), vec);  }
> 
> +static inline int
> +ipsec_ev_cryptodev_process(const struct lcore_conf_ev_tx_int_port_wrkr
> *lconf,
> +			   struct rte_event *ev)
> +{
> +	struct rte_ether_hdr *ethhdr;
> +	struct rte_crypto_op *cop;
> +	struct rte_mbuf *pkt;
> +	uint16_t port_id;
> +	struct ip *ip;
> +
> +	/* Get pkt data */
> +	cop = ev->event_ptr;
> +	pkt = cop->sym->m_src;
> +
> +	/* If operation was not successful, drop the packet */
> +	if (unlikely(cop->status != RTE_CRYPTO_OP_STATUS_SUCCESS)) {
> +		RTE_LOG_DP(INFO, IPSEC, "Crypto operation failed\n");
> +		free_pkts(&pkt, 1);
> +		return PKT_DROPPED;
> +	}
> +
> +	ip = rte_pktmbuf_mtod(pkt, struct ip *);
> +
> +	/* Prepend Ether layer */
> +	ethhdr = (struct rte_ether_hdr *)rte_pktmbuf_prepend(pkt,
> +RTE_ETHER_HDR_LEN);
> +
> +	/* Route pkt and update required fields */
> +	if (ip->ip_v == IPVERSION) {
> +		pkt->ol_flags |= lconf->outbound.ipv4_offloads;
> +		pkt->l3_len = sizeof(struct ip);
> +		pkt->l2_len = RTE_ETHER_HDR_LEN;
> +
> +		ethhdr->ether_type =
> rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV4);
> +
> +		port_id = route4_pkt(pkt, lconf->rt.rt4_ctx);
> +	} else {
> +		pkt->ol_flags |= lconf->outbound.ipv6_offloads;
> +		pkt->l3_len = sizeof(struct ip6_hdr);
> +		pkt->l2_len = RTE_ETHER_HDR_LEN;
> +
> +		ethhdr->ether_type =
> rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV6);
> +
> +		port_id = route6_pkt(pkt, lconf->rt.rt6_ctx);
> +	}
> +
> +	if (unlikely(port_id == RTE_MAX_ETHPORTS)) {
> +		RTE_LOG_DP(DEBUG, IPSEC, "Cannot route processed
> packet\n");
> +		free_pkts(&pkt, 1);
> +		return PKT_DROPPED;
> +	}
> +
> +	/* Update Ether with port's MAC addresses */
> +	memcpy(&ethhdr->src_addr, &ethaddr_tbl[port_id].src, sizeof(struct
> rte_ether_addr));
> +	memcpy(&ethhdr->dst_addr, &ethaddr_tbl[port_id].dst, sizeof(struct
> +rte_ether_addr));
> +
> +	/* Update event */
> +	ev->mbuf = pkt;
> +
> +	return PKT_FORWARDED;
> +}
> +
>  /*
>   * Event mode exposes various operating modes depending on the
>   * capabilities of the event device and the operating mode @@ -924,6
> +1102,14 @@ ipsec_wrkr_non_burst_int_port_app_mode(struct
> eh_event_link_info *links,
>  		"Launching event mode worker (non-burst - Tx internal port -
> "
>  		"app mode) on lcore %d\n", lcore_id);
> 
> +	ret = ipsec_sad_lcore_cache_init(app_sa_prm.cache_sz);
> +	if (ret != 0) {
> +		RTE_LOG(ERR, IPSEC,
> +			"SAD cache init on lcore %u, failed with code: %d\n",
> +			lcore_id, ret);
> +		return;
> +	}
> +
>  	/* Check if it's single link */
>  	if (nb_links != 1) {
>  		RTE_LOG(INFO, IPSEC,
> @@ -950,6 +1136,20 @@ ipsec_wrkr_non_burst_int_port_app_mode(struct
> eh_event_link_info *links,
>  			ipsec_ev_vector_process(&lconf, links, &ev);
>  			continue;
>  		case RTE_EVENT_TYPE_ETHDEV:
> +			if (is_unprotected_port(ev.mbuf->port))
> +				ret =
> process_ipsec_ev_inbound(&lconf.inbound,
> +								&lconf.rt,
> links, &ev);
> +			else
> +				ret =
> process_ipsec_ev_outbound(&lconf.outbound,
> +								&lconf.rt,
> links, &ev);
> +			if (ret != 1)
> +				/* The pkt has been dropped or posted */
> +				continue;
> +			break;
> +		case RTE_EVENT_TYPE_CRYPTODEV:
> +			ret = ipsec_ev_cryptodev_process(&lconf, &ev);
> +			if (unlikely(ret != PKT_FORWARDED))
> +				continue;
>  			break;
>  		default:
>  			RTE_LOG(ERR, IPSEC, "Invalid event type %u", @@ -
> 957,16 +1157,6 @@ ipsec_wrkr_non_burst_int_port_app_mode(struct
> eh_event_link_info *links,
>  			continue;
>  		}
> 
> -		if (is_unprotected_port(ev.mbuf->port))
> -			ret = process_ipsec_ev_inbound(&lconf.inbound,
> -							&lconf.rt, &ev);
> -		else
> -			ret = process_ipsec_ev_outbound(&lconf.outbound,
> -							&lconf.rt, &ev);
> -		if (ret != 1)
> -			/* The pkt has been dropped */
> -			continue;
> -
>  		/*
>  		 * Since tx internal port is available, events can be
>  		 * directly enqueued to the adapter and it would be diff --git
> a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c index
> 5dca578790..7a0c528f75 100644
> --- a/examples/ipsec-secgw/sa.c
> +++ b/examples/ipsec-secgw/sa.c
> @@ -1235,7 +1235,8 @@ static int
>  sa_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
>  		uint32_t nb_entries, uint32_t inbound,
>  		struct socket_ctx *skt_ctx,
> -		struct ipsec_ctx *ips_ctx[])
> +		struct ipsec_ctx *ips_ctx[],
> +		const struct eventmode_conf *em_conf)
>  {
>  	struct ipsec_sa *sa;
>  	uint32_t i, idx;
> @@ -1408,7 +1409,8 @@ sa_add_rules(struct sa_ctx *sa_ctx, const struct
> ipsec_sa entries[],
>  				return -EINVAL;
>  			}
>  		} else {
> -			rc = create_lookaside_session(ips_ctx, skt_ctx, sa,
> ips);
> +			rc = create_lookaside_session(ips_ctx, skt_ctx,
> +						      em_conf, sa, ips);
>  			if (rc != 0) {
>  				RTE_LOG(ERR, IPSEC_ESP,
>  					"create_lookaside_session()
> failed\n"); @@ -1431,17 +1433,19 @@ sa_add_rules(struct sa_ctx *sa_ctx,
> const struct ipsec_sa entries[],  static inline int  sa_out_add_rules(struct
> sa_ctx *sa_ctx, const struct ipsec_sa entries[],
>  		uint32_t nb_entries, struct socket_ctx *skt_ctx,
> -		struct ipsec_ctx *ips_ctx[])
> +		struct ipsec_ctx *ips_ctx[],
> +		const struct eventmode_conf *em_conf)
>  {
> -	return sa_add_rules(sa_ctx, entries, nb_entries, 0, skt_ctx, ips_ctx);
> +	return sa_add_rules(sa_ctx, entries, nb_entries, 0, skt_ctx, ips_ctx,
> +em_conf);
>  }
> 
>  static inline int
>  sa_in_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
>  		uint32_t nb_entries, struct socket_ctx *skt_ctx,
> -		struct ipsec_ctx *ips_ctx[])
> +		struct ipsec_ctx *ips_ctx[],
> +		const struct eventmode_conf *em_conf)
>  {
> -	return sa_add_rules(sa_ctx, entries, nb_entries, 1, skt_ctx, ips_ctx);
> +	return sa_add_rules(sa_ctx, entries, nb_entries, 1, skt_ctx, ips_ctx,
> +em_conf);
>  }
> 
>  /*
> @@ -1673,7 +1677,8 @@ sa_spi_present(struct sa_ctx *sa_ctx, uint32_t spi,
> int inbound)
> 
>  void
>  sa_init(struct socket_ctx *ctx, int32_t socket_id,
> -		struct lcore_conf *lcore_conf)
> +	struct lcore_conf *lcore_conf,
> +	const struct eventmode_conf *em_conf)
>  {
>  	int32_t rc;
>  	const char *name;
> @@ -1705,7 +1710,7 @@ sa_init(struct socket_ctx *ctx, int32_t socket_id,
>  			rte_exit(EXIT_FAILURE, "failed to init SAD\n");
>  		RTE_LCORE_FOREACH(lcore_id)
>  			ipsec_ctx[lcore_id] = &lcore_conf[lcore_id].inbound;
> -		sa_in_add_rules(ctx->sa_in, sa_in, nb_sa_in, ctx, ipsec_ctx);
> +		sa_in_add_rules(ctx->sa_in, sa_in, nb_sa_in, ctx, ipsec_ctx,
> +em_conf);
> 
>  		if (app_sa_prm.enable != 0) {
>  			rc = ipsec_satbl_init(ctx->sa_in, nb_sa_in, @@ -
> 1727,7 +1732,7 @@ sa_init(struct socket_ctx *ctx, int32_t socket_id,
> 
>  		RTE_LCORE_FOREACH(lcore_id)
>  			ipsec_ctx[lcore_id] =
> &lcore_conf[lcore_id].outbound;
> -		sa_out_add_rules(ctx->sa_out, sa_out, nb_sa_out, ctx,
> ipsec_ctx);
> +		sa_out_add_rules(ctx->sa_out, sa_out, nb_sa_out, ctx,
> ipsec_ctx,
> +em_conf);
> 
>  		if (app_sa_prm.enable != 0) {
>  			rc = ipsec_satbl_init(ctx->sa_out, nb_sa_out,
> --
> 2.25.1


  parent reply	other threads:[~2022-09-22  5:05 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-04 10:36 [PATCH 0/6] " Volodymyr Fialko
2022-08-04 10:36 ` [PATCH 1/6] examples/ipsec-secgw: add event crypto adapter init Volodymyr Fialko
2022-08-04 10:36 ` [PATCH 2/6] examples/ipsec-secgw: add queue for event crypto adapter Volodymyr Fialko
2022-08-04 10:36 ` [PATCH 3/6] examples/ipsec-secgw: add lookaside event mode Volodymyr Fialko
2022-08-05  3:26   ` Suanming Mou
2022-08-05 10:06     ` Volodymyr Fialko
2022-09-22  5:05   ` Gagandeep Singh [this message]
2022-09-22 11:07     ` Volodymyr Fialko
2022-08-04 10:36 ` [PATCH 4/6] examples/ipsec-secgw: add stats for " Volodymyr Fialko
2022-08-04 10:36 ` [PATCH 5/6] examples/ipsec-secgw: add event vector support for lookaside Volodymyr Fialko
2022-08-04 10:36 ` [PATCH 6/6] examples/ipsec-secgw: reduce number of QP for event lookaside Volodymyr Fialko
2022-09-21 18:28 ` [PATCH 0/6] examples/ipsec-secgw: add lookaside event mode Akhil Goyal
2022-10-10 12:30 ` [PATCH v2 " Volodymyr Fialko
2022-10-10 12:30   ` [PATCH v2 1/6] examples/ipsec-secgw: add event crypto adapter init Volodymyr Fialko
2022-10-10 12:30   ` [PATCH v2 2/6] examples/ipsec-secgw: add queue for event crypto adapter Volodymyr Fialko
2022-10-10 12:30   ` [PATCH v2 3/6] examples/ipsec-secgw: add lookaside event mode Volodymyr Fialko
2022-10-10 12:31   ` [PATCH v2 4/6] examples/ipsec-secgw: add stats for " Volodymyr Fialko
2022-10-10 12:31   ` [PATCH v2 5/6] examples/ipsec-secgw: add event vector support for lookaside Volodymyr Fialko
2022-10-10 12:31   ` [PATCH v2 6/6] examples/ipsec-secgw: reduce number of QP for event lookaside Volodymyr Fialko
2022-10-10 16:56   ` [PATCH v3 0/6] examples/ipsec-secgw: add lookaside event mode Volodymyr Fialko
2022-10-10 16:56     ` [PATCH v3 1/6] examples/ipsec-secgw: add event crypto adapter init Volodymyr Fialko
2022-10-10 16:56     ` [PATCH v3 2/6] examples/ipsec-secgw: add queue for event crypto adapter Volodymyr Fialko
2022-10-10 16:56     ` [PATCH v3 3/6] examples/ipsec-secgw: add lookaside event mode Volodymyr Fialko
2022-10-10 16:56     ` [PATCH v3 4/6] examples/ipsec-secgw: add stats for " Volodymyr Fialko
2022-10-10 16:56     ` [PATCH v3 5/6] examples/ipsec-secgw: add event vector support for lookaside Volodymyr Fialko
2022-10-10 16:56     ` [PATCH v3 6/6] examples/ipsec-secgw: reduce number of QP for event lookaside Volodymyr Fialko
2022-10-10 19:02     ` [PATCH v3 0/6] examples/ipsec-secgw: add lookaside event mode Akhil Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AS8PR04MB81988BFE6482B8BA186DB2C3E14E9@AS8PR04MB8198.eurprd04.prod.outlook.com \
    --to=g.singh@nxp.com \
    --cc=anoobj@marvell.com \
    --cc=dev@dpdk.org \
    --cc=gakhil@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=radu.nicolau@intel.com \
    --cc=vfialko@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).