From: "Mcnamara, John" <john.mcnamara@intel.com>
To: Ajit Khaparde <ajit.khaparde@broadcom.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [v2 04/15] bnxt: Update Broadcom PMD driver documentation
Date: Mon, 26 Sep 2016 19:33:45 +0000 [thread overview]
Message-ID: <B27915DBBA3421428155699D51E4CFE20262314F@IRSMSX103.ger.corp.intel.com> (raw)
In-Reply-To: <20160926161837.GA28155@C02PT1RBG8WP.aus.broadcom.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ajit Khaparde
> Sent: Monday, September 26, 2016 5:19 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [v2 04/15] bnxt: Update Broadcom PMD driver
> documentation
>
> Update doc/guides/nics/bnxt.rst to indicate that the bnxt PMD driver
> supports Broadcom NetXtreme-C/NetXtreme-E BCM5730X/BCM5740X family of
> network controllers and Broadcom StrataGX BCM5871X family of
> communications processors.
>
> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> ---
> doc/guides/nics/bnxt.rst | 23 +++++++++++++++++------
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/doc/guides/nics/bnxt.rst b/doc/guides/nics/bnxt.rst index
> 2669e98..cf7fca8 100644
> --- a/doc/guides/nics/bnxt.rst
> +++ b/doc/guides/nics/bnxt.rst
> @@ -30,13 +30,24 @@
> bnxt poll mode driver library
> =============================
>
> -The bnxt poll mode library (**librte_pmd_bnxt**) implements support for -
> **Broadcom NetXtreme(r) C-Series**. These adapters support Standards- -
> compliant 10/25/50Gbps 30MPPS full-duplex throughput.
> -
> -Information about this family of adapters can be found in the
> +The bnxt poll mode library (**librte_pmd_bnxt**) implements support for:
> +**Broadcom NetXtreme-C(r)/NetXtreme-E(r) BCM5730X and BCM5740X family of
> +Ethernet Network Controllers**. These adapters support Standards
> +compliant 10/25/50Gbps 30MPPS full-duplex throughput.
> +**Broadcom StrataGX(r) BCM5871X Series of Communucations Processors**
> +These ARM based processors target a broad range of networking
> +applications including virtual CPE (vCPE) and NFV appliances, 10G
> +service routers and gateways, control plane processing for Ethernet
> +switches and network attached storage (NAS).
> +
> +Information about the NetXtreme family of adapters can be found in the
> `NetXtreme(r) Brand section <https://www.broadcom.com/products/ethernet-
> communication-and-switching?technology%5B%5D=88>`_
> -of the `Broadcom web site <http://www.broadcom.com/>`_.
> +of the `Broadcom website <http://www.broadcom.com/>`_.
> +
> +Information about the StrataGX family of adapters can be found in the
> +`StrataGX(r) BCM5871X Series section
> +<http://www.broadcom.com/products/enterprise-and-network-processors/pro
> +cessors/bcm58712>`_ of the `Broadcom website
> +<http://www.broadcom.com/>`_.
Hi,
There is a full stop missing before "These ARM ...".
Reformatting the text as follows would looks better in the rendered output:
The bnxt poll mode library (**librte_pmd_bnxt**) implements support for:
* **Broadcom NetXtreme-C(r)/NetXtreme-E(r) BCM5730X and BCM5740X family of
Ethernet Network Controllers**: These adapters support Standards compliant
10/25/50Gbps 30MPPS full-duplex throughput.
Information about the NetXtreme family of adapters can be found in the
`NetXtreme(r) Brand section
<https://www.broadcom.com/products/ethernet-communication-and-switching?technology%5B%5D=88>`_
of the `Broadcom website <http://www.broadcom.com/>`_.
* **Broadcom StrataGX(r) BCM5871X Series of Communucations Processors**: These
ARM based processors target a broad range of networking applications
including virtual CPE (vCPE) and NFV appliances, 10G service routers and
gateways, control plane processing for Ethernet switches and network
attached storage (NAS).
Information about the StrataGX family of adapters can be found in the
`StrataGX(r) BCM5871X Series section
<http://www.broadcom.com/products/enterprise-and-network-processors/processors/bcm58712>`_
of the `Broadcom website <http://www.broadcom.com/>`_.
P.S. Could you mark the V1 version as "superseded" in PatchWork.
Regards,
John
next prev parent reply other threads:[~2016-09-26 19:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-26 16:18 Ajit Khaparde
2016-09-26 19:33 ` Mcnamara, John [this message]
2016-09-26 19:39 ` Ajit Khaparde
2016-09-26 20:22 ` Mcnamara, John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B27915DBBA3421428155699D51E4CFE20262314F@IRSMSX103.ger.corp.intel.com \
--to=john.mcnamara@intel.com \
--cc=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).