From: "Cao, Min" <min.cao@intel.com>
To: "Wu, Jingjing" <jingjing.wu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH]i40e: move the fdir_setup from dev_init to dev_configure
Date: Fri, 26 Dec 2014 02:15:00 +0000 [thread overview]
Message-ID: <B6059B2012717B4390714544B1F509E110DF4C3B@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <2601191342CEEE43887BDE71AB977258213BCC1B@IRSMSX105.ger.corp.intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Patch name: [dpdk-dev] [PATCH]i40e: move the fdir_setup from dev_init to dev_configure
Test Flag: Tested-by
Tester name: min.cao@intel.com
Result summary: total 4 cases, 4 passed, 0 failed
Test Case 1:
Name: Fortville flow director with no flexible playload(IPv4/IPv6)
Environment: OS: Fedora20 3.11.10-301.fc20.x86_64
gcc (GCC) 4.8.2
CPU: Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz
NIC: Fortville eagle
Test result: PASSED
Test Case 2:
Name: Fortville flow director with flexible playload(IPv4/IPv6)
Environment: OS: Fedora20 3.11.10-301.fc20.x86_64
gcc (GCC) 4.8.2
CPU: Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz
NIC: Fortville eagle
Test result: PASSED
Test Case 3:
Name: Fortville flow director flush
Environment: OS: Fedora20 3.11.10-301.fc20.x86_64
gcc (GCC) 4.8.2
CPU: Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz
NIC: Fortville eagle
Test result: PASSED
Test Case 4:
Name: Fortville flow director performance
Environment: OS: Fedora20 3.11.10-301.fc20.x86_64
gcc (GCC) 4.8.2
CPU: Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz
NIC: Fortville eagle
Test result: PASSED
> -----Original Message-----
> From: Wu, Jingjing
> Sent: Thursday, December 04, 2014 3:40 PM
> To: dev@dpdk.org
> Cc: Wu, Jingjing; Zhang, Helin; Ananyev, Konstantin
> Subject: [PATCH]i40e: move the fdir_setup from dev_init to dev_configure
>
> In order not to affect the FVL's performance by default setting, this
> patch moves the flow director initialization from i40e_pf_setup to
> i40e_dev_configure according to the mode in fdir configure info.
> Then the resources used for flow director will be only setup if it is enabled.
>
> Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
> ---
> app/test-pmd/cmdline.c | 4 +-
> lib/librte_pmd_i40e/i40e_ethdev.c | 49 ++++++++++++-----------
> lib/librte_pmd_i40e/i40e_fdir.c | 83 ++++++++++++++++++++-------------------
> 3 files changed, 72 insertions(+), 64 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index c61c3a0..f79ea3e 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -8546,7 +8546,7 @@ cmd_flow_director_flex_mask_parsed(void *parsed_result,
> }
> flex_mask.flow_type = str2flowtype(res->flow_type);
> fdir_set_flex_mask(res->port_id, &flex_mask);
> - cmd_reconfig_device_queue(res->port_id, 1, 0);
> + cmd_reconfig_device_queue(res->port_id, 1, 1);
> }
>
> cmdline_parse_token_string_t cmd_flow_director_flexmask =
> @@ -8667,7 +8667,7 @@ cmd_flow_director_flxpld_parsed(void *parsed_result,
> }
>
> fdir_set_flex_payload(res->port_id, &flex_cfg);
> - cmd_reconfig_device_queue(res->port_id, 1, 0);
> + cmd_reconfig_device_queue(res->port_id, 1, 1);
> }
>
> cmdline_parse_token_string_t cmd_flow_director_flexpayload =
> diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
> index 87e750a..002d4a9 100644
> --- a/lib/librte_pmd_i40e/i40e_ethdev.c
> +++ b/lib/librte_pmd_i40e/i40e_ethdev.c
> @@ -546,7 +546,6 @@ eth_i40e_dev_init(__rte_unused struct eth_driver *eth_drv,
> err_mac_alloc:
> i40e_vsi_release(pf->main_vsi);
> err_setup_pf_switch:
> - i40e_fdir_teardown(pf);
> err_get_mac_addr:
> err_configure_lan_hmc:
> (void)i40e_shutdown_lan_hmc(hw);
> @@ -565,8 +564,27 @@ err_get_capabilities:
> static int
> i40e_dev_configure(struct rte_eth_dev *dev)
> {
> - int ret;
> + struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> enum rte_eth_rx_mq_mode mq_mode = dev->data->dev_conf.rxmode.mq_mode;
> + int ret;
> +
> + if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_PERFECT) {
> + ret = i40e_fdir_setup(pf);
> + if (ret != I40E_SUCCESS) {
> + PMD_DRV_LOG(ERR, "Failed to setup flow director.");
> + return -ENOTSUP;
> + }
> + ret = i40e_fdir_configure(dev);
> + if (ret < 0) {
> + PMD_DRV_LOG(ERR, "failed to configure fdir.");
> + goto err;
> + }
> + } else
> + i40e_fdir_teardown(pf);
> +
> + ret = i40e_dev_init_vlan(dev);
> + if (ret < 0)
> + goto err;
>
> /* VMDQ setup.
> * Needs to move VMDQ setting out of i40e_pf_config_mq_rx() as VMDQ and
> @@ -583,10 +601,12 @@ i40e_dev_configure(struct rte_eth_dev *dev)
> if (mq_mode & ETH_MQ_RX_VMDQ_FLAG) {
> ret = i40e_vmdq_setup(dev);
> if (ret)
> - return ret;
> + goto err;
> }
> -
> - return i40e_dev_init_vlan(dev);
> + return 0;
> +err:
> + i40e_fdir_teardown(pf);
> + return ret;
> }
>
> void
> @@ -837,14 +857,8 @@ i40e_dev_start(struct rte_eth_dev *dev)
> i40e_vsi_enable_queues_intr(pf->vmdq[i].vsi);
> }
>
> - ret = i40e_fdir_configure(dev);
> - if (ret < 0) {
> - PMD_DRV_LOG(ERR, "failed to configure fdir.");
> - goto err_up;
> - }
> -
> /* enable FDIR MSIX interrupt */
> - if (pf->flags & I40E_FLAG_FDIR) {
> + if (pf->fdir.fdir_vsi) {
> i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi);
> i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
> }
> @@ -903,7 +917,7 @@ i40e_dev_stop(struct rte_eth_dev *dev)
> i40e_vsi_queues_unbind_intr(pf->vmdq[i].vsi);
> }
>
> - if (pf->flags & I40E_FLAG_FDIR) {
> + if (pf->fdir.fdir_vsi) {
> i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi);
> i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
> }
> @@ -3302,15 +3316,6 @@ i40e_pf_setup(struct i40e_pf *pf)
> }
> pf->main_vsi = vsi;
>
> - /* setup FDIR after main vsi created.*/
> - if (pf->flags & I40E_FLAG_FDIR) {
> - ret = i40e_fdir_setup(pf);
> - if (ret != I40E_SUCCESS) {
> - PMD_DRV_LOG(ERR, "Failed to setup flow director.");
> - pf->flags &= ~I40E_FLAG_FDIR;
> - }
> - }
> -
> /* Configure filter control */
> memset(&settings, 0, sizeof(settings));
> if (hw->func_caps.rss_table_size == ETH_RSS_RETA_SIZE_128)
> diff --git a/lib/librte_pmd_i40e/i40e_fdir.c b/lib/librte_pmd_i40e/i40e_fdir.c
> index d75b96e..ad38803 100644
> --- a/lib/librte_pmd_i40e/i40e_fdir.c
> +++ b/lib/librte_pmd_i40e/i40e_fdir.c
> @@ -196,6 +196,11 @@ i40e_fdir_setup(struct i40e_pf *pf)
> const struct rte_memzone *mz = NULL;
> struct rte_eth_dev *eth_dev = pf->adapter->eth_dev;
>
> + if ((pf->flags & I40E_FLAG_FDIR) == 0) {
> + PMD_INIT_LOG(ERR, "HW doesn't support FDIR");
> + return I40E_NOT_SUPPORTED;
> + }
> +
> PMD_DRV_LOG(INFO, "FDIR HW Capabilities: num_filters_guaranteed = %u,"
> " num_filters_best_effort = %u.",
> hw->func_caps.fd_filters_guaranteed,
> @@ -203,9 +208,8 @@ i40e_fdir_setup(struct i40e_pf *pf)
>
> vsi = pf->fdir.fdir_vsi;
> if (vsi) {
> - PMD_DRV_LOG(ERR, "FDIR vsi pointer needs "
> - "to be null before creation.");
> - return I40E_ERR_BAD_PTR;
> + PMD_DRV_LOG(INFO, "FDIR initialization has been done.");
> + return I40E_SUCCESS;
> }
> /* make new FDIR VSI */
> vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR, pf->main_vsi, 0);
> @@ -302,6 +306,8 @@ i40e_fdir_teardown(struct i40e_pf *pf)
> struct i40e_vsi *vsi;
>
> vsi = pf->fdir.fdir_vsi;
> + if (!vsi)
> + return;
> i40e_switch_tx_queue(hw, vsi->base_queue, FALSE);
> i40e_switch_rx_queue(hw, vsi->base_queue, FALSE);
> i40e_dev_rx_queue_release(pf->fdir.rxq);
> @@ -653,37 +659,29 @@ i40e_fdir_configure(struct rte_eth_dev *dev)
> }
> }
>
> + /* enable FDIR filter */
> val = I40E_READ_REG(hw, I40E_PFQF_CTL_0);
> - if ((pf->flags & I40E_FLAG_FDIR) &&
> - dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_PERFECT) {
> - /* enable FDIR filter */
> - val |= I40E_PFQF_CTL_0_FD_ENA_MASK;
> - I40E_WRITE_REG(hw, I40E_PFQF_CTL_0, val);
> + val |= I40E_PFQF_CTL_0_FD_ENA_MASK;
> + I40E_WRITE_REG(hw, I40E_PFQF_CTL_0, val);
>
> - i40e_init_flx_pld(pf); /* set flex config to default value */
> + i40e_init_flx_pld(pf); /* set flex config to default value */
>
> - conf = &dev->data->dev_conf.fdir_conf.flex_conf;
> - ret = i40e_check_fdir_flex_conf(conf);
> - if (ret < 0) {
> - PMD_DRV_LOG(ERR, " invalid configuration arguments.");
> - return -EINVAL;
> - }
> - /* configure flex payload */
> - for (i = 0; i < conf->nb_payloads; i++)
> - i40e_set_flx_pld_cfg(pf, &conf->flex_set[i]);
> - /* configure flex mask*/
> - for (i = 0; i < conf->nb_flexmasks; i++) {
> - pctype = i40e_flowtype_to_pctype(
> - conf->flex_mask[i].flow_type);
> - i40e_set_flex_mask_on_pctype(pf,
> - pctype,
> - &conf->flex_mask[i]);
> - }
> - } else {
> - /* disable FDIR filter */
> - val &= ~I40E_PFQF_CTL_0_FD_ENA_MASK;
> - I40E_WRITE_REG(hw, I40E_PFQF_CTL_0, val);
> - pf->flags &= ~I40E_FLAG_FDIR;
> + conf = &dev->data->dev_conf.fdir_conf.flex_conf;
> + ret = i40e_check_fdir_flex_conf(conf);
> + if (ret < 0) {
> + PMD_DRV_LOG(ERR, " invalid configuration arguments.");
> + return -EINVAL;
> + }
> + /* configure flex payload */
> + for (i = 0; i < conf->nb_payloads; i++)
> + i40e_set_flx_pld_cfg(pf, &conf->flex_set[i]);
> + /* configure flex mask*/
> + for (i = 0; i < conf->nb_flexmasks; i++) {
> + pctype = i40e_flowtype_to_pctype(
> + conf->flex_mask[i].flow_type);
> + i40e_set_flex_mask_on_pctype(pf,
> + pctype,
> + &conf->flex_mask[i]);
> }
>
> return ret;
> @@ -982,10 +980,12 @@ i40e_add_del_fdir_filter(struct rte_eth_dev *dev,
> enum i40e_filter_pctype pctype;
> int ret = 0;
>
> - if (!(pf->flags & I40E_FLAG_FDIR)) {
> - PMD_DRV_LOG(ERR, "FDIR is not enabled.");
> + if (dev->data->dev_conf.fdir_conf.mode != RTE_FDIR_MODE_PERFECT) {
> + PMD_DRV_LOG(ERR, "FDIR is not enabled, please"
> + " check the mode in fdir_conf.");
> return -ENOTSUP;
> }
> +
> if (!I40E_VALID_FLOW_TYPE(filter->input.flow_type)) {
> PMD_DRV_LOG(ERR, "invalid flow_type input.");
> return -EINVAL;
> @@ -1263,8 +1263,11 @@ i40e_fdir_info_get(struct rte_eth_dev *dev, struct rte_eth_fdir_info *fdir)
> uint16_t num_flex_set = 0;
> uint16_t num_flex_mask = 0;
>
> - fdir->mode = (pf->flags & I40E_FLAG_FDIR) ?
> - RTE_FDIR_MODE_PERFECT : RTE_FDIR_MODE_NONE;
> + if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_PERFECT)
> + fdir->mode = RTE_FDIR_MODE_PERFECT;
> + else
> + fdir->mode = RTE_FDIR_MODE_NONE;
> +
> fdir->guarant_spc =
> (uint32_t)hw->func_caps.fd_filters_guaranteed;
> fdir->best_spc =
> @@ -1324,11 +1327,11 @@ i40e_fdir_ctrl_func(struct rte_eth_dev *dev,
> struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> int ret = 0;
>
> - if (filter_op == RTE_ETH_FILTER_NOP) {
> - if (!(pf->flags & I40E_FLAG_FDIR))
> - ret = -ENOTSUP;
> - return ret;
> - }
> + if ((pf->flags & I40E_FLAG_FDIR) == 0)
> + return -ENOTSUP;
> +
> + if (filter_op == RTE_ETH_FILTER_NOP)
> + return 0;
>
> if (arg == NULL && filter_op != RTE_ETH_FILTER_FLUSH)
> return -EINVAL;
> --
> 1.8.1.4
next prev parent reply other threads:[~2014-12-26 2:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 15:40 Jingjing Wu
2014-12-04 20:28 ` Ananyev, Konstantin
2014-12-26 2:15 ` Cao, Min [this message]
2014-12-05 0:57 ` Zhang, Helin
2014-12-05 16:13 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B6059B2012717B4390714544B1F509E110DF4C3B@SHSMSX103.ccr.corp.intel.com \
--to=min.cao@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).