Re: [dpdk-dev] [RFC PATCH 3/3] doc: add introduction for fm10k FTAG based forwarding

Re: [dpdk-dev] [RFC PATCH 3/3] doc: add introduction for fm10k FTAG based forwarding

[Wang, Xiao W]

Hi, John

> -----Original Message-----
> From: Mcnamara, John
> Sent: Tuesday, January 12, 2016 10:16 PM
> To: Wang, Xiao W <xiao.w.wang@intel.com>; Chen, Jing D
> <jing.d.chen@intel.com>; Richardson, Bruce <bruce.richardson@intel.com>
> Cc: dev@dpdk.org
> Subject: RE: [dpdk-dev] [RFC PATCH 3/3] doc: add introduction for fm10k
> FTAG based forwarding
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wang Xiao W
> > Sent: Tuesday, January 5, 2016 12:32 PM
> > To: Chen, Jing D; Richardson, Bruce
> > Cc: dev@dpdk.org
> > Subject: [dpdk-dev] [RFC PATCH 3/3] doc: add introduction for fm10k
> > FTAG based forwarding
> >
> > Add a brief introduction on FTAG, describes what's FTAG and how it
> > works in forwarding, introduction on how to run fm10k with FTAG is
> > also included.
> >
> > Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
> > ---
> >  doc/guides/nics/fm10k.rst | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> >
> > diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst
> > index
> > 4206b7f..d82bf41 100644
> > --- a/doc/guides/nics/fm10k.rst
> > +++ b/doc/guides/nics/fm10k.rst
> > @@ -34,6 +34,19 @@ FM10K Poll Mode Driver  The FM10K poll mode driver
> > library provides support for the Intel FM10000
> >  (FM10K) family of 40GbE/100GbE adapters.
> >
> 
> Hi,
> 
> Some very minor comments.
> 
> 
> > +FTAG Based Forwarding of FM10K
> > +------------------------------
> 
> The Documentation Guidelines say to put a newline after section headers.
> 
> > +FTAG Based Forwarding is a unique feature of FM10K. The FM10K family
> > +of NICs support the addition of a Fabric Tag (FTAG) to carry special
> > information.
> > +The FTAG is placed at the beginning of the frame, it contains
> > +information such as where the packet comes from and goes, the vlan tag.
> 
> s/the vlan tag/and the vlan tag
> 
> 
> > +In FTAG based forwarding mode, the switch logic forwards packets
> > +according to glort (global resource tag) information, other than the
> 
> s/other/rather
> 
> 
> > +mac and vlan table. Now this feature works only on PF.
> 
> s/Now/Currently
> 
> 
> > +
> > +To enable this feature, turn CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD to y
> in
> 
> In general variable and config names should be in fixed width quotes:
> 
> ``CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD``
> 
> 
> > +the configuration file. A unit test case fm10k_ftag_autotest is for
> 
> s/for/provided for
> 
> John.
> --
> 
Many thanks for your comments, I'll change accordingly.

Re: [dpdk-dev] [RFC PATCH 3/3] doc: add introduction for fm10k FTAG based forwarding

[Mcnamara, John]

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wang Xiao W
> Sent: Tuesday, January 5, 2016 12:32 PM
> To: Chen, Jing D; Richardson, Bruce
> Cc: dev@dpdk.org
> Subject: [dpdk-dev] [RFC PATCH 3/3] doc: add introduction for fm10k FTAG
> based forwarding
> 
> Add a brief introduction on FTAG, describes what's FTAG and how it works
> in forwarding, introduction on how to run fm10k with FTAG is also
> included.
> 
> Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
> ---
>  doc/guides/nics/fm10k.rst | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst index
> 4206b7f..d82bf41 100644
> --- a/doc/guides/nics/fm10k.rst
> +++ b/doc/guides/nics/fm10k.rst
> @@ -34,6 +34,19 @@ FM10K Poll Mode Driver  The FM10K poll mode driver
> library provides support for the Intel FM10000
>  (FM10K) family of 40GbE/100GbE adapters.
> 

Hi,

Some very minor comments.


> +FTAG Based Forwarding of FM10K
> +------------------------------

The Documentation Guidelines say to put a newline after section headers.

> +FTAG Based Forwarding is a unique feature of FM10K. The FM10K family of
> +NICs support the addition of a Fabric Tag (FTAG) to carry special
> information.
> +The FTAG is placed at the beginning of the frame, it contains
> +information such as where the packet comes from and goes, the vlan tag.

s/the vlan tag/and the vlan tag


> +In FTAG based forwarding mode, the switch logic forwards packets
> +according to glort (global resource tag) information, other than the

s/other/rather


> +mac and vlan table. Now this feature works only on PF.

s/Now/Currently


> +
> +To enable this feature, turn CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD to y in

In general variable and config names should be in fixed width quotes:

``CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD``


> +the configuration file. A unit test case fm10k_ftag_autotest is for

s/for/provided for

John.
-- 

[dpdk-dev] [RFC PATCH 3/3] doc: add introduction for fm10k FTAG based forwarding

[Wang Xiao W]

Add a brief introduction on FTAG, describes what's FTAG and how it works
in forwarding, introduction on how to run fm10k with FTAG is also included.

Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
---
 doc/guides/nics/fm10k.rst | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst
index 4206b7f..d82bf41 100644
--- a/doc/guides/nics/fm10k.rst
+++ b/doc/guides/nics/fm10k.rst
@@ -34,6 +34,19 @@ FM10K Poll Mode Driver
 The FM10K poll mode driver library provides support for the Intel FM10000
 (FM10K) family of 40GbE/100GbE adapters.
 
+FTAG Based Forwarding of FM10K
+------------------------------
+FTAG Based Forwarding is a unique feature of FM10K. The FM10K family of NICs
+support the addition of a Fabric Tag (FTAG) to carry special information.
+The FTAG is placed at the beginning of the frame, it contains information such
+as where the packet comes from and goes, the vlan tag. In FTAG based forwarding
+mode, the switch logic forwards packets according to glort (global resource tag)
+information, other than the mac and vlan table. Now this feature works only on
+PF.
+
+To enable this feature, turn CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD to y in the
+configuration file. A unit test case fm10k_ftag_autotest is for reference, it shows
+how to read sglort info on RX and how to make an FTAG on TX.
 
 Limitations
 -----------
-- 
1.9.3