[dpdk-dev] Unable to bind Virtio_pci in DPDK1.7

["Dey, Souvik" <sodey@sonusnet.com>]

Hi All,
                I am currently facing a weird issue where I am not able to bind the virtio_pci device to igb_uio in DPDK1.7 on QEMU/KVM. I can see there are two fold issues.
1.The pci_unbind.py script where the virt_path is removed from 1.6 to 1.7 version due to which the initial status is not able to show any interface name.

Network devices using DPDK-compatible driver
============================================
<none>

Network devices using kernel driver
===================================
0000:00:03.0 'Virtio network device' if= drv=virtio-pci unused=virtio_pci,igb_uio
0000:00:04.0 'Virtio network device' if= drv=virtio-pci unused=virtio_pci,igb_uio
0000:00:05.0 'Virtio network device' if= drv=virtio-pci unused=virtio_pci,igb_uio
0000:00:06.0 'Virtio network device' if= drv=virtio-pci unused=virtio_pci,igb_uio

Other network devices
=====================
<none>


2. After correcting the above issue , I am stuck where the interface is failing to bind to igb_uio. I tried to bind the interface manually  to igb_uio but I am getting the following error

lspci -k
00:05.0 Ethernet controller: Red Hat, Inc Virtio network device
        Subsystem: Red Hat, Inc Device 0001
        Kernel modules: virtio_pci

echo 0000:00:05.0 > /sys/bus/pci/drivers/igb_uio/bind
-bash: echo: write error: No such device

Due to this the bind fails and the virtio_pmd is not able to take and my app is not coming up.
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL:   probe driver: 1af4:1000 rte_virtio_pmd
EAL:   0000:00:06.0 not managed by UIO driver, skipping
EAL: Error - exiting with code: 1
  Cause: No Ethernet ports - bye

I see lots of email threads on similar issue but none had the final conclusion. So can someone guide me on how to proceed further or get out of this error.

--
Regards,
Souvik