From: Yong Wang <yongwang@vmware.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4] net/kni: add KNI PMD
Date: Mon, 12 Dec 2016 21:59:13 +0000 [thread overview]
Message-ID: <BY2PR05MB23595855DDDC3B10D01E651CAF980@BY2PR05MB2359.namprd05.prod.outlook.com> (raw)
In-Reply-To: <20161130181228.25380-1-ferruh.yigit@intel.com>
> -----Original Message-----
> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> Sent: Wednesday, November 30, 2016 10:12 AM
> To: dev@dpdk.org
> Cc: Ferruh Yigit <ferruh.yigit@intel.com>; Yong Wang
> <yongwang@vmware.com>
> Subject: [PATCH v4] net/kni: add KNI PMD
>
> Add KNI PMD which wraps librte_kni for ease of use.
>
> KNI PMD can be used as any regular PMD to send / receive packets to the
> Linux networking stack.
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> ---
>
> v4:
> * allow only single queue
> * use driver.name as name
>
> v3:
> * rebase on top of latest master
>
> v2:
> * updated driver name eth_kni -> net_kni
> ---
> config/common_base | 1 +
> config/common_linuxapp | 1 +
> drivers/net/Makefile | 1 +
> drivers/net/kni/Makefile | 63 +++++
> drivers/net/kni/rte_eth_kni.c | 462
> ++++++++++++++++++++++++++++++++
> drivers/net/kni/rte_pmd_kni_version.map | 4 +
> mk/rte.app.mk | 10 +-
> 7 files changed, 537 insertions(+), 5 deletions(-)
> create mode 100644 drivers/net/kni/Makefile
> create mode 100644 drivers/net/kni/rte_eth_kni.c
> create mode 100644 drivers/net/kni/rte_pmd_kni_version.map
>
> diff --git a/config/common_base b/config/common_base
> index 4bff83a..3385879 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -543,6 +543,7 @@ CONFIG_RTE_PIPELINE_STATS_COLLECT=n
> # Compile librte_kni
> #
> CONFIG_RTE_LIBRTE_KNI=n
> +CONFIG_RTE_LIBRTE_PMD_KNI=n
> CONFIG_RTE_KNI_KMOD=n
> CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
> CONFIG_RTE_KNI_VHOST=n
> diff --git a/config/common_linuxapp b/config/common_linuxapp
> index 2483dfa..2ecd510 100644
> --- a/config/common_linuxapp
> +++ b/config/common_linuxapp
> @@ -39,6 +39,7 @@ CONFIG_RTE_EAL_IGB_UIO=y
> CONFIG_RTE_EAL_VFIO=y
> CONFIG_RTE_KNI_KMOD=y
> CONFIG_RTE_LIBRTE_KNI=y
> +CONFIG_RTE_LIBRTE_PMD_KNI=y
> CONFIG_RTE_LIBRTE_VHOST=y
> CONFIG_RTE_LIBRTE_PMD_VHOST=y
> CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index bc93230..c4771cd 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -41,6 +41,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
> DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
> DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
> DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe
> +DIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += kni
> DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
> DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
> DIRS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += mpipe
> diff --git a/drivers/net/kni/Makefile b/drivers/net/kni/Makefile
> new file mode 100644
> index 0000000..0b7cf91
> --- /dev/null
> +++ b/drivers/net/kni/Makefile
> @@ -0,0 +1,63 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016 Intel Corporation. All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +#
> +# library name
> +#
> +LIB = librte_pmd_kni.a
> +
> +CFLAGS += -O3
> +CFLAGS += $(WERROR_FLAGS)
> +LDLIBS += -lpthread
> +
> +EXPORT_MAP := rte_pmd_kni_version.map
> +
> +LIBABIVER := 1
> +
> +#
> +# all source are stored in SRCS-y
> +#
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += rte_eth_kni.c
> +
> +#
> +# Export include files
> +#
> +SYMLINK-y-include +=
> +
> +# this lib depends upon:
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_eal
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_ether
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_kni
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mbuf
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mempool
> +
> +include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/drivers/net/kni/rte_eth_kni.c b/drivers/net/kni/rte_eth_kni.c
> new file mode 100644
> index 0000000..6c4df96
> --- /dev/null
> +++ b/drivers/net/kni/rte_eth_kni.c
> @@ -0,0 +1,462 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2016 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> + */
> +
> +#include <fcntl.h>
> +#include <pthread.h>
> +#include <unistd.h>
> +
> +#include <rte_ethdev.h>
> +#include <rte_kni.h>
> +#include <rte_malloc.h>
> +#include <rte_vdev.h>
> +
> +/* Only single queue supported */
> +#define KNI_MAX_QUEUE_PER_PORT 1
> +
> +#define MAX_PACKET_SZ 2048
> +#define MAX_KNI_PORTS 8
> +
> +struct pmd_queue_stats {
> + uint64_t pkts;
> + uint64_t bytes;
> + uint64_t err_pkts;
> +};
> +
> +struct pmd_queue {
> + struct pmd_internals *internals;
> + struct rte_mempool *mb_pool;
> +
> + struct pmd_queue_stats rx;
> + struct pmd_queue_stats tx;
> +};
> +
> +struct pmd_internals {
> + struct rte_kni *kni;
> + int is_kni_started;
> +
> + pthread_t thread;
> + int stop_thread;
> +
> + struct pmd_queue rx_queues[KNI_MAX_QUEUE_PER_PORT];
> + struct pmd_queue tx_queues[KNI_MAX_QUEUE_PER_PORT];
> +};
> +
> +static struct ether_addr eth_addr;
> +static struct rte_eth_link pmd_link = {
> + .link_speed = ETH_SPEED_NUM_10G,
> + .link_duplex = ETH_LINK_FULL_DUPLEX,
> + .link_status = 0
> +};
> +static int is_kni_initialized;
> +
> +static uint16_t
> +eth_kni_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
> +{
> + struct pmd_queue *kni_q = q;
> + struct rte_kni *kni = kni_q->internals->kni;
> + uint16_t nb_pkts;
> +
> + nb_pkts = rte_kni_rx_burst(kni, bufs, nb_bufs);
> +
> + kni_q->rx.pkts += nb_pkts;
> + kni_q->rx.err_pkts += nb_bufs - nb_pkts;
> +
> + return nb_pkts;
> +}
> +
> +static uint16_t
> +eth_kni_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
> +{
> + struct pmd_queue *kni_q = q;
> + struct rte_kni *kni = kni_q->internals->kni;
> + uint16_t nb_pkts;
> +
> + nb_pkts = rte_kni_tx_burst(kni, bufs, nb_bufs);
> +
> + kni_q->tx.pkts += nb_pkts;
> + kni_q->tx.err_pkts += nb_bufs - nb_pkts;
> +
> + return nb_pkts;
> +}
> +
> +static void *
> +kni_handle_request(void *param)
> +{
> + struct pmd_internals *internals = param;
> +#define MS 1000
> +
> + while (!internals->stop_thread) {
> + rte_kni_handle_request(internals->kni);
> + usleep(500 * MS);
> + }
> +
> + return param;
> +}
> +
Do we really need a thread to handle request by default? I know there are apps that handle request their own way and having a separate thread could add synchronization problems. Can we at least add an option to disable this?
> +static int
> +eth_kni_start(struct rte_eth_dev *dev)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + uint16_t port_id = dev->data->port_id;
> + struct rte_mempool *mb_pool;
> + struct rte_kni_conf conf;
> + const char *name = dev->data->name + 4; /* remove net_ */
> +
> + snprintf(conf.name, RTE_KNI_NAMESIZE, "%s", name);
> + conf.force_bind = 0;
> + conf.group_id = port_id;
> + conf.mbuf_size = MAX_PACKET_SZ;
> + mb_pool = internals->rx_queues[0].mb_pool;
> +
> + internals->kni = rte_kni_alloc(mb_pool, &conf, NULL);
> + if (internals->kni == NULL) {
> + RTE_LOG(ERR, PMD,
> + "Fail to create kni for port: %d\n", port_id);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_dev_start(struct rte_eth_dev *dev)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + int ret;
> +
> + if (internals->is_kni_started == 0) {
> + ret = eth_kni_start(dev);
> + if (ret)
> + return -1;
> + internals->is_kni_started = 1;
> + }
> +
In case is_kni_started is 1 already, shouldn't we return directly instead of proceeding?
> + ret = pthread_create(&internals->thread, NULL, kni_handle_request,
> + internals);
> + if (ret) {
> + RTE_LOG(ERR, PMD, "Fail to create kni request thread\n");
> + return -1;
> + }
> +
> + dev->data->dev_link.link_status = 1;
> +
> + return 0;
> +}
> +
> +static void
> +eth_kni_dev_stop(struct rte_eth_dev *dev)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + int ret;
> +
> + internals->stop_thread = 1;
> +
> + ret = pthread_cancel(internals->thread);
> + if (ret)
> + RTE_LOG(ERR, PMD, "Can't cancel the thread\n");
> +
> + ret = pthread_join(internals->thread, NULL);
> + if (ret)
> + RTE_LOG(ERR, PMD, "Can't join the thread\n");
> +
> + internals->stop_thread = 0;
> +
> + dev->data->dev_link.link_status = 0;
> +}
> +
> +static int
> +eth_kni_dev_configure(struct rte_eth_dev *dev __rte_unused)
> +{
> + return 0;
> +}
> +
> +static void
> +eth_kni_dev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info
> *dev_info)
> +{
> + struct rte_eth_dev_data *data = dev->data;
> +
> + dev_info->driver_name = data->drv_name;
> + dev_info->max_mac_addrs = 1;
> + dev_info->max_rx_pktlen = (uint32_t)-1;
> + dev_info->max_rx_queues = KNI_MAX_QUEUE_PER_PORT;
> + dev_info->max_tx_queues = KNI_MAX_QUEUE_PER_PORT;
> + dev_info->min_rx_bufsize = 0;
> + dev_info->pci_dev = NULL;
> +}
> +
> +static int
> +eth_kni_rx_queue_setup(struct rte_eth_dev *dev,
> + uint16_t rx_queue_id,
> + uint16_t nb_rx_desc __rte_unused,
> + unsigned int socket_id __rte_unused,
> + const struct rte_eth_rxconf *rx_conf __rte_unused,
> + struct rte_mempool *mb_pool)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + struct pmd_queue *q;
> +
> + q = &internals->rx_queues[rx_queue_id];
> + q->internals = internals;
> + q->mb_pool = mb_pool;
> +
> + dev->data->rx_queues[rx_queue_id] = q;
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_tx_queue_setup(struct rte_eth_dev *dev,
> + uint16_t tx_queue_id,
> + uint16_t nb_tx_desc __rte_unused,
> + unsigned int socket_id __rte_unused,
> + const struct rte_eth_txconf *tx_conf __rte_unused)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + struct pmd_queue *q;
> +
> + q = &internals->tx_queues[tx_queue_id];
> + q->internals = internals;
> +
> + dev->data->tx_queues[tx_queue_id] = q;
> +
> + return 0;
> +}
> +
> +static void
> +eth_kni_queue_release(void *q __rte_unused)
> +{
> +}
> +
> +static int
> +eth_kni_link_update(struct rte_eth_dev *dev __rte_unused,
> + int wait_to_complete __rte_unused)
> +{
> + return 0;
> +}
> +
> +static void
> +eth_kni_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
> +{
> + unsigned long rx_packets_total = 0, rx_bytes_total = 0;
> + unsigned long tx_packets_total = 0, tx_bytes_total = 0;
> + struct rte_eth_dev_data *data = dev->data;
> + unsigned long tx_packets_err_total = 0;
> + unsigned int i, num_stats;
> + struct pmd_queue *q;
> +
> + num_stats = RTE_MIN((unsigned
> int)RTE_ETHDEV_QUEUE_STAT_CNTRS,
> + data->nb_rx_queues);
> + for (i = 0; i < num_stats; i++) {
> + q = data->rx_queues[i];
> + stats->q_ipackets[i] = q->rx.pkts;
> + stats->q_ibytes[i] = q->rx.bytes;
> + rx_packets_total += stats->q_ipackets[i];
> + rx_bytes_total += stats->q_ibytes[i];
> + }
> +
> + num_stats = RTE_MIN((unsigned
> int)RTE_ETHDEV_QUEUE_STAT_CNTRS,
> + data->nb_tx_queues);
> + for (i = 0; i < num_stats; i++) {
> + q = data->tx_queues[i];
> + stats->q_opackets[i] = q->tx.pkts;
> + stats->q_obytes[i] = q->tx.bytes;
> + stats->q_errors[i] = q->tx.err_pkts;
> + tx_packets_total += stats->q_opackets[i];
> + tx_bytes_total += stats->q_obytes[i];
> + tx_packets_err_total += stats->q_errors[i];
> + }
> +
> + stats->ipackets = rx_packets_total;
> + stats->ibytes = rx_bytes_total;
> + stats->opackets = tx_packets_total;
> + stats->obytes = tx_bytes_total;
> + stats->oerrors = tx_packets_err_total;
> +}
> +
> +static void
> +eth_kni_stats_reset(struct rte_eth_dev *dev)
> +{
> + struct rte_eth_dev_data *data = dev->data;
> + struct pmd_queue *q;
> + unsigned int i;
> +
> + for (i = 0; i < data->nb_rx_queues; i++) {
> + q = data->rx_queues[i];
> + q->rx.pkts = 0;
> + q->rx.bytes = 0;
> + }
> + for (i = 0; i < data->nb_tx_queues; i++) {
> + q = data->tx_queues[i];
> + q->tx.pkts = 0;
> + q->tx.bytes = 0;
> + q->tx.err_pkts = 0;
> + }
> +}
> +
> +static const struct eth_dev_ops eth_kni_ops = {
> + .dev_start = eth_kni_dev_start,
> + .dev_stop = eth_kni_dev_stop,
> + .dev_configure = eth_kni_dev_configure,
> + .dev_infos_get = eth_kni_dev_info,
> + .rx_queue_setup = eth_kni_rx_queue_setup,
> + .tx_queue_setup = eth_kni_tx_queue_setup,
> + .rx_queue_release = eth_kni_queue_release,
> + .tx_queue_release = eth_kni_queue_release,
> + .link_update = eth_kni_link_update,
> + .stats_get = eth_kni_stats_get,
> + .stats_reset = eth_kni_stats_reset,
> +};
> +
> +static struct rte_vdev_driver eth_kni_drv;
> +
> +static struct rte_eth_dev *
> +eth_kni_create(const char *name, unsigned int numa_node)
> +{
> + struct pmd_internals *internals = NULL;
> + struct rte_eth_dev_data *data;
> + struct rte_eth_dev *eth_dev;
> +
> + RTE_LOG(INFO, PMD, "Creating kni ethdev on numa socket %u\n",
> + numa_node);
> +
> + data = rte_zmalloc_socket(name, sizeof(*data), 0, numa_node);
> + if (data == NULL)
> + goto error;
> +
> + internals = rte_zmalloc_socket(name, sizeof(*internals), 0,
> numa_node);
> + if (internals == NULL)
> + goto error;
> +
> + /* reserve an ethdev entry */
> + eth_dev = rte_eth_dev_allocate(name);
> + if (eth_dev == NULL)
> + goto error;
> +
> + data->dev_private = internals;
> + data->port_id = eth_dev->data->port_id;
> + memmove(data->name, eth_dev->data->name, sizeof(data-
> >name));
> + data->nb_rx_queues = 1;
> + data->nb_tx_queues = 1;
> + data->dev_link = pmd_link;
> + data->mac_addrs = ð_addr;
> +
> + eth_dev->data = data;
> + eth_dev->dev_ops = ð_kni_ops;
> + eth_dev->driver = NULL;
> +
> + data->dev_flags = RTE_ETH_DEV_DETACHABLE;
> + data->kdrv = RTE_KDRV_NONE;
> + data->drv_name = eth_kni_drv.driver.name;
> + data->numa_node = numa_node;
> +
> + return eth_dev;
> +
> +error:
> + rte_free(data);
> + rte_free(internals);
> +
> + return NULL;
> +}
> +
> +static int
> +kni_init(void)
> +{
> + if (is_kni_initialized == 0)
> + rte_kni_init(MAX_KNI_PORTS);
> +
> + is_kni_initialized += 1;
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_probe(const char *name, const char *params __rte_unused)
> +{
> + struct rte_eth_dev *eth_dev;
> + int ret;
> +
> + RTE_LOG(INFO, PMD, "Initializing eth_kni for %s\n", name);
> +
> + ret = kni_init();
> + if (ret < 0)
> + /* Not return error to prevent panic in rte_eal_init() */
> + return 0;
If we don't return error here, the application that needs to add KNI ports eventually will fail. If it's a fail-stop situation, isn't it better to return error where the it happened?
> + eth_dev = eth_kni_create(name, rte_socket_id());
> + if (eth_dev == NULL)
> + return -1;
> +
> + eth_dev->rx_pkt_burst = eth_kni_rx;
> + eth_dev->tx_pkt_burst = eth_kni_tx;
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_remove(const char *name)
> +{
> + struct rte_eth_dev *eth_dev;
> + struct pmd_internals *internals;
> +
> + RTE_LOG(INFO, PMD, "Un-Initializing eth_kni for %s\n", name);
> +
> + /* find the ethdev entry */
> + eth_dev = rte_eth_dev_allocated(name);
> + if (eth_dev == NULL)
> + return -1;
> +
> + eth_kni_dev_stop(eth_dev);
> +
> + if (eth_dev->data) {
> + internals = eth_dev->data->dev_private;
> + rte_kni_release(internals->kni);
> +
> + rte_free(internals);
> + }
> + rte_free(eth_dev->data);
> +
> + rte_eth_dev_release_port(eth_dev);
> +
> + is_kni_initialized -= 1;
> + if (is_kni_initialized == 0)
> + rte_kni_close();
> +
> + return 0;
> +}
> +
> +static struct rte_vdev_driver eth_kni_drv = {
> + .probe = eth_kni_probe,
> + .remove = eth_kni_remove,
> +};
> +
> +RTE_PMD_REGISTER_VDEV(net_kni, eth_kni_drv);
> diff --git a/drivers/net/kni/rte_pmd_kni_version.map
> b/drivers/net/kni/rte_pmd_kni_version.map
> new file mode 100644
> index 0000000..31eca32
> --- /dev/null
> +++ b/drivers/net/kni/rte_pmd_kni_version.map
> @@ -0,0 +1,4 @@
> +DPDK_17.02 {
> +
> + local: *;
> +};
> diff --git a/mk/rte.app.mk b/mk/rte.app.mk
> index f75f0e2..af02816 100644
> --- a/mk/rte.app.mk
> +++ b/mk/rte.app.mk
> @@ -59,11 +59,6 @@ _LDLIBS-y += -L$(RTE_SDK_BIN)/lib
> #
> # Order is important: from higher level to lower level
> #
> -
> -ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> -_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
> -endif
> -
> _LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline
> _LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table
> _LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port
> @@ -84,6 +79,10 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -
> lrte_power
>
> _LDLIBS-y += --whole-archive
>
> +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
> +endif
> +
> _LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
> _LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash
> _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lrte_vhost
> @@ -115,6 +114,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -
> lrte_pmd_enic
> _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
> _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
> _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += -lrte_pmd_kni
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -
> libverbs
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -
> libverbs
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += -lrte_pmd_mpipe -lgxio
> --
> 2.9.3
next prev parent reply other threads:[~2016-12-12 21:59 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-06 10:33 [dpdk-dev] [PATCH] " Ferruh Yigit
2016-09-08 7:44 ` Thomas Monjalon
2016-09-08 9:25 ` Bruce Richardson
2016-09-08 9:38 ` Thomas Monjalon
2016-09-08 18:11 ` Ferruh Yigit
2016-09-09 7:36 ` Thomas Monjalon
2016-09-16 11:29 ` [dpdk-dev] [PATCH v2] " Ferruh Yigit
2016-10-10 13:19 ` [dpdk-dev] [PATCH v3] " Ferruh Yigit
2016-11-03 1:24 ` Yong Wang
2016-11-04 12:21 ` Ferruh Yigit
2016-11-30 18:12 ` [dpdk-dev] [PATCH v4] " Ferruh Yigit
2016-12-12 21:59 ` Yong Wang [this message]
2016-12-14 15:59 ` Ferruh Yigit
2016-12-14 19:25 ` Yong Wang
2016-12-15 15:55 ` Ferruh Yigit
2016-12-19 17:52 ` Yong Wang
2017-01-30 16:57 ` [dpdk-dev] [PATCH v5] " Ferruh Yigit
2017-01-30 19:05 ` Yong Wang
2017-01-30 19:43 ` Ferruh Yigit
2017-01-30 20:09 ` [dpdk-dev] [PATCH v6] " Ferruh Yigit
2017-01-30 21:15 ` [dpdk-dev] [PATCH v7] " Ferruh Yigit
2017-01-31 12:18 ` [dpdk-dev] [PATCH v8] " Ferruh Yigit
2017-02-17 13:42 ` [dpdk-dev] [PATCH v9] " Ferruh Yigit
2017-02-17 13:47 ` Thomas Monjalon
2017-02-17 14:00 ` Eelco Chaudron
2017-02-17 14:29 ` Ferruh Yigit
2017-02-17 14:57 ` Bruce Richardson
2017-02-17 17:52 ` Yong Wang
2017-02-17 22:37 ` Thomas Monjalon
2017-02-20 12:54 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BY2PR05MB23595855DDDC3B10D01E651CAF980@BY2PR05MB2359.namprd05.prod.outlook.com \
--to=yongwang@vmware.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).