From: Rasesh Mody <rmody@marvell.com>
To: Jerin Jacob <jerinjacobk@gmail.com>
Cc: dpdk-dev <dev@dpdk.org>,
Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
Ferruh Yigit <ferruh.yigit@intel.com>,
GR-Everest-DPDK-Dev <GR-Everest-DPDK-Dev@marvell.com>
Subject: Re: [dpdk-dev] [PATCH 0/9] net/qede/base: update FW to 8.40.25.0
Date: Thu, 3 Oct 2019 05:59:22 +0000 [thread overview]
Message-ID: <BYAPR18MB2838DD12D32EA5B279857979B59F0@BYAPR18MB2838.namprd18.prod.outlook.com> (raw)
In-Reply-To: <CALBAE1O+UFnaWFmuWhqdtQt8aKag=ua6d=gBzz1tUnx5go-RVw@mail.gmail.com>
Hi Jerin,
>From: Jerin Jacob <jerinjacobk@gmail.com>
>Sent: Wednesday, October 02, 2019 10:06 PM
>
>On Mon, Sep 30, 2019 at 8:19 AM Rasesh Mody <rmody@marvell.com> wrote:
>>
>> Hi,
>>
>> This patch series updates the FW to 8.40.25.0 and includes
>> corresponding base driver changes. It also includes some enhancements
>and fixes.
>> The PMD version is bumped to 2.11.0.1.
>>
>> Please apply.
>>
>> Thanks!
>> -Rasesh
>>
>> Rasesh Mody (9):
>> net/qede/base: calculate right page index for PBL chains
>> net/qede/base: change MFW mailbox command log verbosity
>> net/qede/base: lock entire QM reconfiguration flow
>> net/qede/base: rename HSI datatypes and funcs
>> net/qede/base: update rt defs NVM cfg and mcp code
>> net/qede/base: move dmae code to HSI
>> net/qede/base: update HSI code
>> net/qede/base: update the FW to 8.40.25.0
>> net/qede: print adapter info during init failure
>
>Hi Rasesh,
>
>I understand it is the _base_ code(probably owned by someone else)but
>there are a lot of checkpatch issues[1] with this patch in base code.
>Is something can be fixed? if so, please send the next version else let us
>know.
I've tried to minimize the checkpatch issues as much as possible. However, I think there are few from the remaining that can be fixed like MACRO_ARG_PRECEDENCE. I'll send a v2 to iron these out.
Please note there are some like SUSPECT_CODE_INDENT, OPEN_ENDED_LINE, which are caused when resolving 80 characters long line warnings. There are few LONG_LINE warnings left as is to maintain code readability. UNNECESSARY_PARENTHESES seem to be false positive as parentheses are helpful in this case.
Thanks!
-Rasesh
>
>[1]
>CHECK:MACRO_ARG_REUSE: Macro argument reuse 'map' - possible side-
>effects?
>#2927: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:163:
>+#define QM_INIT_TX_PQ_MAP(p_hwfn, map, pq_id, vp_pq_id, \
>+ rl_valid, rl_id, voq, wrr) \
>+ do { \
>+ OSAL_MEMSET(&map, 0, sizeof(map)); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_PQ_VALID, 1); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_RL_VALID, rl_valid ? 1 : 0); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_RL_ID, rl_id); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_VP_PQ_ID, vp_pq_id); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_VOQ, voq); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_WRR_WEIGHT_GROUP, wrr); \
>+ STORE_RT_REG(p_hwfn, QM_REG_TXPQMAP_RT_OFFSET + pq_id,
>*((u32
>+*)&map));\
> } while (0)
>
>CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'map' may be better as
>'(map)' to avoid precedence issues
>#2927: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:163:
>+#define QM_INIT_TX_PQ_MAP(p_hwfn, map, pq_id, vp_pq_id, \
>+ rl_valid, rl_id, voq, wrr) \
>+ do { \
>+ OSAL_MEMSET(&map, 0, sizeof(map)); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_PQ_VALID, 1); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_RL_VALID, rl_valid ? 1 : 0); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_RL_ID, rl_id); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_VP_PQ_ID, vp_pq_id); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_VOQ, voq); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_WRR_WEIGHT_GROUP, wrr); \
>+ STORE_RT_REG(p_hwfn, QM_REG_TXPQMAP_RT_OFFSET + pq_id,
>*((u32
>+*)&map));\
> } while (0)
>
>CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'pq_id' may be better as
>'(pq_id)' to avoid precedence issues
>#2927: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:163:
>+#define QM_INIT_TX_PQ_MAP(p_hwfn, map, pq_id, vp_pq_id, \
>+ rl_valid, rl_id, voq, wrr) \
>+ do { \
>+ OSAL_MEMSET(&map, 0, sizeof(map)); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_PQ_VALID, 1); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_RL_VALID, rl_valid ? 1 : 0); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_RL_ID, rl_id); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_VP_PQ_ID, vp_pq_id); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_VOQ, voq); \
>+ SET_FIELD(map.reg, QM_RF_PQ_MAP_WRR_WEIGHT_GROUP, wrr); \
>+ STORE_RT_REG(p_hwfn, QM_REG_TXPQMAP_RT_OFFSET + pq_id,
>*((u32
>+*)&map));\
> } while (0)
>
>WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional
>statements (8, 8)
>#2929: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:165:
>+ do { \
>+ OSAL_MEMSET(&map, 0, sizeof(map)); \
>
>total: 0 errors, 1 warnings, 3 checks, 3176 lines checked
>CHECK:CAMELCASE: Avoid CamelCase: <optionId>
>#1028: FILE: drivers/net/qede/base/mcp_public.h:1707:
>+#define SINGLE_NVM_WR_OP(optionId) \
>
>WARNING:LONG_LINE: line over 80 characters
>#1210: FILE: drivers/net/qede/base/nvm_cfg.h:1120:
>+ #define
>NVM_CFG1_GLOB_WARNING_TEMPERATURE_THRESHOLD_MASK
>0x1FE00000
>
>WARNING:LONG_LINE: line over 80 characters
>#1322: FILE: drivers/net/qede/base/nvm_cfg.h:1229:
>+ #define
>NVM_CFG1_GLOB_STORM_CLOCK_FREQUENCY_STORM_CLK_DEFAULT 0x0
>
>WARNING:LONG_LINE: line over 80 characters
>#1447: FILE: drivers/net/qede/base/nvm_cfg.h:1354:
>+ #define
>NVM_CFG1_GLOB_NUMBER_OF_PROVISIONED_VF_MAC_MASK
>0x00FF0000
>
>WARNING:LONG_LINE: line over 80 characters
>#1569: FILE: drivers/net/qede/base/nvm_cfg.h:2229:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_25G_BASE_R 0x10
>
>WARNING:LONG_LINE: line over 80 characters
>#1572: FILE: drivers/net/qede/base/nvm_cfg.h:2232:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_40G_BASE_R 0x80
>
>WARNING:LONG_LINE: line over 80 characters
>#1574: FILE: drivers/net/qede/base/nvm_cfg.h:2234:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_50G_BASE_R 0x200
>
>WARNING:LONG_LINE: line over 80 characters
>#1575: FILE: drivers/net/qede/base/nvm_cfg.h:2235:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_50G_RS528 0x400
>
>WARNING:LONG_LINE: line over 80 characters
>#1576: FILE: drivers/net/qede/base/nvm_cfg.h:2236:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_50G_RS544 0x800
>
>WARNING:LONG_LINE: line over 80 characters
>#1577: FILE: drivers/net/qede/base/nvm_cfg.h:2237:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_100G_NONE 0x1000
>
>WARNING:LONG_LINE: line over 80 characters
>#1578: FILE: drivers/net/qede/base/nvm_cfg.h:2238:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_100G_BASE_R
>0x2000
>
>WARNING:LONG_LINE: line over 80 characters
>#1579: FILE: drivers/net/qede/base/nvm_cfg.h:2239:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_100G_RS528 0x4000
>
>WARNING:LONG_LINE: line over 80 characters
>#1580: FILE: drivers/net/qede/base/nvm_cfg.h:2240:
>+ #define
>NVM_CFG1_PORT_EXTENDED_FEC_MODE_EXTND_FEC_100G_RS544 0x8000
>
>total: 0 errors, 12 warnings, 1 checks, 2043 lines checked
>
>### net/qede/base: update HSI code
>
>CHECK:CAMELCASE: Avoid CamelCase: <vfId>
>WARNING:LONG_LINE_COMMENT: line over 80 characters
>#2913: FILE: drivers/net/qede/base/ecore_iro_values.h:217:
>+ /*
>+
>TSTORM_NVMF_PORT_TASKPOOL_PRODUCER_CONSUMER_OFFSET(port_n
>um_id,taskpoo
>+ l_index),
>*/
>
>total: 0 errors, 1 warnings, 2 checks, 2956 lines checked
>
>### net/qede/base: update the FW to 8.40.25.0
>
>CHECK:OPEN_ENDED_LINE: Lines should not end with a '('
>#433: FILE: drivers/net/qede/base/ecore_cxt.c:633:
>+ p_blk = ecore_cxt_set_blk(
>
>CHECK:OPEN_ENDED_LINE: Lines should not end with a '('
>#461: FILE: drivers/net/qede/base/ecore_cxt.c:688:
>+ p_blk = ecore_cxt_set_blk(
>
>CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'line
>== first_skipped_line'
>#794: FILE: drivers/net/qede/base/ecore_cxt.c:1018:
>+ if (lines_to_skip && (line == first_skipped_line)) {
>
>WARNING:EMBEDDED_FUNCTION_NAME: Prefer using '"%s...", __func__' to
>using 'ecore_hw_init_chip', this function's name, in a string
>#1482: FILE: drivers/net/qede/base/ecore_dev.c:2719:
>+ "ecore_hw_init_chip() shouldn't be called in
>a non-emulation environment\n");
>
>CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pq_size' - possible side-
>effects?
>#2348: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:26:
>+#define QM_PQ_MEM_4KB(pq_size) \
>+ (pq_size ? DIV_ROUND_UP((pq_size + 1) * QM_PQ_ELEMENT_SIZE,
>+0x1000) : 0)
>
>CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pq_size' - possible side-
>effects?
>#2350: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:28:
>+#define QM_PQ_SIZE_256B(pq_size) \
>+ (pq_size ? DIV_ROUND_UP(pq_size, 0x100) - 1 : 0)
>
>CHECK:MACRO_ARG_REUSE: Macro argument reuse 'rl_id' - possible side-
>effects?
>#2410: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:171:
>+#define PQ_INFO_ELEMENT(vp_pq_id, pf, tc, port, rl_valid, rl_id) \
>+ (((vp_pq_id) << 0) | ((pf) << 12) | ((tc) << 16) | ((port) << 20) | \
>+ ((rl_valid ? 1 : 0) << 22) | (((rl_id) & 255) << 24) | \
>+ (((rl_id) >> 8) << 9))
>
>CHECK:CAMELCASE: Avoid CamelCase: <pData>
>#3106: FILE: drivers/net/qede/base/ecore_init_fw_funcs.c:1438:
>+ u32 *pData,
>
>CHECK:MACRO_ARG_REUSE: Macro argument reuse 'port' - possible side-
>effects?
>#3524: FILE: drivers/net/qede/base/ecore_init_fw_funcs.h:20:
>+#define VOQ(port, tc, max_phys_tcs_per_port) \
>+ ((tc) == PURE_LB_TC ? NUM_OF_PHYS_TCS * MAX_NUM_PORTS_BB +
>(port) : \
>+ (port) * (max_phys_tcs_per_port) + (tc))
>
>CHECK:MACRO_ARG_REUSE: Macro argument reuse 'tc' - possible side-
>effects?
>#3524: FILE: drivers/net/qede/base/ecore_init_fw_funcs.h:20:
>+#define VOQ(port, tc, max_phys_tcs_per_port) \
>+ ((tc) == PURE_LB_TC ? NUM_OF_PHYS_TCS * MAX_NUM
>
>
>
>
>>
>> drivers/net/qede/base/bcm_osal.c | 1 +
>> drivers/net/qede/base/bcm_osal.h | 5 +-
>> drivers/net/qede/base/common_hsi.h | 257 +--
>> drivers/net/qede/base/ecore.h | 77 +-
>> drivers/net/qede/base/ecore_chain.h | 84 +-
>> drivers/net/qede/base/ecore_cxt.c | 520 ++++---
>> drivers/net/qede/base/ecore_cxt.h | 12 +
>> drivers/net/qede/base/ecore_dcbx.c | 7 +-
>> drivers/net/qede/base/ecore_dev.c | 753 +++++----
>> drivers/net/qede/base/ecore_dev_api.h | 92 --
>> drivers/net/qede/base/ecore_gtt_reg_addr.h | 42 +-
>> drivers/net/qede/base/ecore_gtt_values.h | 18 +-
>> drivers/net/qede/base/ecore_hsi_common.h | 1134 +++++++-------
>> drivers/net/qede/base/ecore_hsi_debug_tools.h | 475 +++---
>> drivers/net/qede/base/ecore_hsi_eth.h | 1386 ++++++++---------
>> drivers/net/qede/base/ecore_hsi_init_func.h | 25 +-
>> drivers/net/qede/base/ecore_hsi_init_tool.h | 42 +-
>> drivers/net/qede/base/ecore_hw.c | 68 +-
>> drivers/net/qede/base/ecore_hw.h | 98 +-
>> drivers/net/qede/base/ecore_init_fw_funcs.c | 717 ++++-----
>> drivers/net/qede/base/ecore_init_fw_funcs.h | 107 +-
>> drivers/net/qede/base/ecore_init_ops.c | 66 +-
>> drivers/net/qede/base/ecore_init_ops.h | 12 +-
>> drivers/net/qede/base/ecore_int.c | 131 +-
>> drivers/net/qede/base/ecore_int.h | 4 +-
>> drivers/net/qede/base/ecore_int_api.h | 13 +-
>> drivers/net/qede/base/ecore_iov_api.h | 4 +-
>> drivers/net/qede/base/ecore_iro.h | 320 ++--
>> drivers/net/qede/base/ecore_iro_values.h | 336 ++--
>> drivers/net/qede/base/ecore_l2.c | 10 +-
>> drivers/net/qede/base/ecore_l2_api.h | 2 +
>> drivers/net/qede/base/ecore_mcp.c | 296 ++--
>> drivers/net/qede/base/ecore_mcp.h | 9 +-
>> drivers/net/qede/base/ecore_proto_if.h | 1 +
>> drivers/net/qede/base/ecore_rt_defs.h | 870 +++++------
>> drivers/net/qede/base/ecore_sp_commands.c | 15 +-
>> drivers/net/qede/base/ecore_spq.c | 55 +-
>> drivers/net/qede/base/ecore_sriov.c | 178 ++-
>> drivers/net/qede/base/ecore_sriov.h | 4 +-
>> drivers/net/qede/base/ecore_vf.c | 18 +-
>> drivers/net/qede/base/eth_common.h | 101 +-
>> drivers/net/qede/base/mcp_public.h | 59 +-
>> drivers/net/qede/base/nvm_cfg.h | 909 ++++++++++-
>> drivers/net/qede/base/reg_addr.h | 75 +-
>> drivers/net/qede/qede_ethdev.c | 54 +-
>> drivers/net/qede/qede_ethdev.h | 21 +-
>> drivers/net/qede/qede_main.c | 2 +-
>> drivers/net/qede/qede_rxtx.c | 28 +-
>> 48 files changed, 5471 insertions(+), 4042 deletions(-)
>>
>> --
>> 2.18.0
>>
next prev parent reply other threads:[~2019-10-03 5:59 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-30 2:49 Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 1/9] net/qede/base: calculate right page index for PBL chains Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 2/9] net/qede/base: change MFW mailbox command log verbosity Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 3/9] net/qede/base: lock entire QM reconfiguration flow Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 4/9] net/qede/base: rename HSI datatypes and funcs Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 5/9] net/qede/base: update rt defs NVM cfg and mcp code Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 6/9] net/qede/base: move dmae code to HSI Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 7/9] net/qede/base: update HSI code Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 8/9] net/qede/base: update the FW to 8.40.25.0 Rasesh Mody
2019-09-30 2:49 ` [dpdk-dev] [PATCH 9/9] net/qede: print adapter info during init failure Rasesh Mody
2019-10-03 5:06 ` [dpdk-dev] [PATCH 0/9] net/qede/base: update FW to 8.40.25.0 Jerin Jacob
2019-10-03 5:59 ` Rasesh Mody [this message]
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 " Rasesh Mody
2019-10-11 7:57 ` Jerin Jacob
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 1/9] net/qede/base: calculate right page index for PBL chains Rasesh Mody
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 2/9] net/qede/base: change MFW mailbox command log verbosity Rasesh Mody
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 3/9] net/qede/base: lock entire QM reconfiguration flow Rasesh Mody
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 4/9] net/qede/base: rename HSI datatypes and funcs Rasesh Mody
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 5/9] net/qede/base: update rt defs NVM cfg and mcp code Rasesh Mody
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 6/9] net/qede/base: move dmae code to HSI Rasesh Mody
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 7/9] net/qede/base: update HSI code Rasesh Mody
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 8/9] net/qede/base: update the FW to 8.40.25.0 Rasesh Mody
2019-10-11 16:13 ` Ferruh Yigit
2019-10-06 20:14 ` [dpdk-dev] [PATCH v2 9/9] net/qede: print adapter info during init failure Rasesh Mody
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR18MB2838DD12D32EA5B279857979B59F0@BYAPR18MB2838.namprd18.prod.outlook.com \
--to=rmody@marvell.com \
--cc=GR-Everest-DPDK-Dev@marvell.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerinj@marvell.com \
--cc=jerinjacobk@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).