Re: [dpdk-dev] Debugging igbvf_pmd

[Prashant Upadhyaya <prashant.upadhyaya@aricent.com>]

Hi Sambath,

Did you follow the step of applying the mac to each of the virtual function as per the release notes in DPDK ?
And ofcourse the src mac of your packets should be 'that' mac as set above.

Regards
-Prashant

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Sambath Kumar Balasubramanian
Sent: Sunday, November 03, 2013 4:26 AM
To: dev@dpdk.org
Subject: Re: [dpdk-dev] Debugging igbvf_pmd

Sorry pressed the send button too soon. The NIC Card we are using is

Intel Corporation 82576 Virtual Function (rev 01)

Do we need to do now NIC/CPU low level debugging or is there some issue in the sw that could cause the packet to be dropped below this log message.

PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 pktlen=60 tx_first=14
tx_last=14

PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 tx_tail=15 nb_tx=1

Thanks,
Sambath


On Sat, Nov 2, 2013 at 3:54 PM, Sambath Kumar Balasubramanian < sambath.balasubramanian@gmail.com> wrote:

> Hi,
>
>   We are developing an App over DPDK and in one scenario with SR-IOV
> with one of the VFs mapped to a VM and DPDK running on the VM, we see
> that the packets are not coming on the wire but I get the following
> debug logs for every packet transmitted. We are getting the same
> format of packets on the wire in a different scenario so IMO the
> Virtual Function ports are set up properly. Any idea how this can be
> debugged further. The NIC card we are using is
>
>
>
> PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 pktlen=60 tx_first=14
> tx_last=14
>
> PMD: eth_igb_xmit_pkts(): port_id=3 queue_id=0 tx_tail=15 nb_tx=1
>
> Regards,
> Sambath
>
>




===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================