* Re: [dpdk-dev] Fwd: OVS with DPDK ..Error packets
2015-07-29 21:32 ` [dpdk-dev] Fwd: OVS with DPDK ..Error packets Srikanth Akula
@ 2015-07-31 8:02 ` Traynor, Kevin
0 siblings, 0 replies; 2+ messages in thread
From: Traynor, Kevin @ 2015-07-31 8:02 UTC (permalink / raw)
To: Srikanth Akula, dev, dev
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Srikanth Akula
> Sent: Wednesday, July 29, 2015 10:32 PM
> To: dev@dpdk.org; dev@openvswitch.org
> Subject: [dpdk-dev] Fwd: OVS with DPDK ..Error packets
>
> (+DPDK dev team )
>
>
> Hello ,
>
> I am trying to test the OVS_DPDK performance and found that lot of packets
> being treated as error packets .
>
> ovs-vsctl get Interface dpdk0 statistics
> {collisions=0, rx_bytes=38915076374, rx_crc_err=0, rx_dropped=0,
> *rx_errors=3840287219
> <3840287219>, *rx_frame_err=0, rx_over_err=0, rx_packets=292972799,
> tx_bytes=38935883904, tx_dropped=0, tx_errors=0, tx_packets=293068162}
>
> I am running DPDK application inside my VM .
>
> Looks like there is a buffer issue ( 64Bytes - 10Gbps)
>
> Could somebody let me know if i have missed any configuration in DPDK/OVS ?
Errors can show here when you are sending traffic in at a rate higher than can
be handled, so it can be normal to see that in some cases.
First thing I would check is that you have your PMD(s) and qemu threads doing
the fwding core affinitised to different cores so they get the max amount of
cycles they can.
I would also check a simple phy-phy test to eliminate any test equipment/NIC
setup issues.
>
> -Srikanth
^ permalink raw reply [flat|nested] 2+ messages in thread