From: Christian Ehrhardt <christian.ehrhardt@canonical.com>
To: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: dpdk stable <stable@dpdk.org>, dpdk-dev <dev@dpdk.org>,
Abhishek Marathe <Abhishek.Marathe@microsoft.com>,
Ali Alnubani <alialnu@nvidia.com>,
benjamin.walker@intel.com,
David Christensen <drc@linux.vnet.ibm.com>,
Hariprasad Govindharajan <hariprasad.govindharajan@intel.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Ian Stokes <ian.stokes@intel.com>,
Jerin Jacob <jerinj@marvell.com>,
John McNamara <john.mcnamara@intel.com>,
Ju-Hyoung Lee <juhlee@microsoft.com>,
Kevin Traynor <ktraynor@redhat.com>,
Luca Boccassi <bluca@debian.org>, Pei Zhang <pezhang@redhat.com>,
qian.q.xu@intel.com, Raslan Darawsheh <rasland@nvidia.com>,
Thomas Monjalon <thomas@monjalon.net>,
yuan.peng@intel.com, zhaoyan.chen@intel.com
Subject: Re: 19.11.12 patches review and test
Date: Mon, 4 Apr 2022 08:35:26 +0200 [thread overview]
Message-ID: <CAATJJ0KguR7HsR5Sby2yYwmDb1QpNb=jjN6u3efEH_FBDUUrJA@mail.gmail.com> (raw)
In-Reply-To: <CAH-L+nOwtjkYJb986_XBXk1yhaP+C7aPN-VLugsALPPLv+CJSw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 10061 bytes --]
On Fri, Apr 1, 2022 at 4:34 PM Kalesh Anakkur Purayil <
kalesh-anakkur.purayil@broadcom.com> wrote:
> Hi Christian,
>
> Testing with dpdk v19.11.12-rc1 from Broadcom looks good. Tested with the
> fix for Bug 977 on top of 19.11.12-rc1.
>
>
Thank you Kalesh, I've added it to the validation info of this release.
> - Basic functionality:
> Send and receive multiple types of traffic.
> - Changing/checking link status through testpmd.
> - RSS tests with tunnel and non-tunnel packets
> - TSO tests with tunnel and non-tunnel packets
> - VLAN filtering/strip tests.
> - unicast/multicast MAC filtering tests
> - statistics tests
> - Rx/Tx Checksum offload tests
> - MTU tests and jumbo frame tests
> - Promiscuous/allmulti tests
> - Basic flow offload tests
>
> NIC: BCM57414 NetXtreme-E 10Gb/25Gb Ethernet Controller, Firmware:
> 222.0.112.0
> NIC: BCM57508 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb/200Gb Ethernet,
> Firmware : 222.0.112.0
>
> Regards,
> Kalesh
>
> On Mon, Mar 21, 2022 at 5:25 PM <christian.ehrhardt@canonical.com> wrote:
>
>> Hi all,
>>
>> Here is a list of patches targeted for stable release 19.11.12.
>>
>> The planned date for the final release is 7th of April.
>>
>> Please help with testing and validation of your use cases and report
>> any issues/results with reply-all to this mail. For the final release
>> the fixes and reported validations will be added to the release notes.
>>
>> A release candidate tarball can be found at:
>>
>> https://dpdk.org/browse/dpdk-stable/tag/?id=v19.11.12-rc1
>>
>> These patches are located at branch 19.11 of dpdk-stable repo:
>> https://dpdk.org/browse/dpdk-stable/
>>
>> Thanks.
>>
>> Christian Ehrhardt <christian.ehrhardt@canonical.com>
>>
>> ---
>> Adham Masarwah (1):
>> app/testpmd: fix show RSS RETA on Windows
>>
>> Alexander Kozyrev (2):
>> net/mlx5: fix maximum packet headers size for TSO
>> net/mlx5: fix committed bucket size
>>
>> Ali Alnubani (1):
>> doc: fix typos and punctuation in flow API guide
>>
>> Andy Pei (1):
>> vdpa/ifc: fix log info mismatch
>>
>> Arek Kusztal (1):
>> cryptodev: fix RSA key type name
>>
>> Bin Zheng (1):
>> net/ixgbe: add vector Rx parameter check
>>
>> Bing Zhao (1):
>> net/mlx5: fix matcher priority with ICMP or ICMPv6
>>
>> Brian Dooley (10):
>> telemetry: add missing C++ guards
>> acl: add missing C++ guards
>> compressdev: add missing C++ guards
>> eventdev: add missing C++ guards
>> kni: add missing C++ guards
>> examples/l2fwd-crypto: fix port mask overflow
>> crypto/virtio: fix out-of-bounds access
>> eal: fix missing C++ guards
>> ethdev: add missing C++ guards
>> vhost: add missing c++ guards
>>
>> Bruce Richardson (15):
>> build: fix warning about using -Wextra flag
>> ipsec: fix C++ include
>> table: fix C++ include
>> vhost: fix C++ include
>> doc: add dependency on examples for API doxygen
>> eventdev: fix C++ include
>> eal: fix C++ include
>> build: remove deprecated Meson functions
>> build: fix warnings when running external commands
>> drivers: remove warning with Meson 0.59
>> ethdev: fix cast for C++ compatibility
>> distributor: fix potential overflow
>> eal/freebsd: add missing C++ include guards
>> compressdev: fix missing space in log macro
>> cryptodev: fix clang C++ include
>>
>> Chenbo Xia (1):
>> vhost: fix queue number check when setting inflight FD
>>
>> Chuanshe Zhang (1):
>> examples/flow_classify: fix failure message
>>
>> Ciara Loftus (1):
>> net/af_xdp: ensure socket is deleted on Rx queue setup error
>>
>> David Marchand (6):
>> config/ppc: fix build with GCC >= 10
>> devtools: fix comment detection in forbidden token check
>> stack: fix stubs header export
>> test/mbuf: fix mbuf data content check
>> net/af_xdp: add missing trailing newline in logs
>> vhost: fix FD leak with inflight messages
>>
>> Dmitry Kozlyuk (4):
>> net/mlx5: fix modify port action validation
>> common/mlx5: add Netlink event helpers
>> net/mlx5: fix link status change detection
>> net/mlx5: fix initial link status detection
>>
>> Ferruh Yigit (1):
>> ethdev: fix doxygen comments for device info struct
>>
>> Haiyue Wang (1):
>> doc: fix KNI PMD name typo
>>
>> Honnappa Nagarahalli (1):
>> examples/distributor: reduce Tx queue number to 1
>>
>> Huisong Li (10):
>> net/hns3: fix residual MAC after setting default MAC
>> net/hns3: fix secondary process reference count
>> net/hns3: fix multi-process action register and unregister
>> net/hns3: unregister MP action on close for secondary
>> net/hns3: fix using enum as boolean
>> net/hns3: fix max packet size rollback in PF
>> kni: fix freeing order in device release
>> net/hns3: fix RSS TC mode entry
>> net/hns3: fix VF RSS TC mode entry
>> net/hns3: increase time waiting for PF reset completion
>>
>> Ivan Malov (3):
>> net/sfc: validate queue span when parsing flow action RSS
>> net/sfc: do not push fast free offload to default TxQ config
>> net/sfc: demand Tx fast free offload on EF10 simple datapath
>>
>> Jakub Poczatek (1):
>> doc: fix FIPS guide
>>
>> Jiawei Wang (1):
>> net/mlx5: fix NIC egress flow mismatch in switchdev mode
>>
>> Jie Hai (1):
>> net/hns3: remove duplicate macro definition
>>
>> Jie Zhou (1):
>> test/mem: fix error check
>>
>> Junfeng Guo (1):
>> raw/ntb: clear all valid doorbell bits on init
>>
>> Kalesh AP (10):
>> net/bnxt: fix xstats query
>> net/bnxt: handle ring cleanup in case of error
>> net/bnxt: fix queue stop operation
>> net/bnxt: cap maximum number of unicast MAC addresses
>> net/bnxt: fix multicast address set
>> net/bnxt: restore RSS configuration after reset recovery
>> net/bnxt: fix memzone allocation per VNIC
>> net/bnxt: fix handling of VF configuration change
>> net/bnxt: get maximum supported multicast filters count
>> net/bnxt: fix xstats names query overrun
>>
>> Kathleen Capella (1):
>> net/iavf: count continuous DD bits for Arm
>>
>> Kevin Traynor (1):
>> maintainers: update for stable branches
>>
>> Lijun Ou (1):
>> net/hns3: fix RSS key with null
>>
>> Luca Boccassi (1):
>> cryptodev: add backward-compatible enum
>>
>> Markus Theil (1):
>> kni: fix ioctl signature
>>
>> Martin Spinler (2):
>> net/nfb: fix array indexes in deinit functions
>> net/nfb: fix multicast/promiscuous mode switching
>>
>> Maxime Coquelin (1):
>> vhost: fix unsafe vring addresses modifications
>>
>> Maxime Gouin (2):
>> bus/ifpga: remove useless check while browsing devices
>> net/nfp: remove useless range checks
>>
>> Michael Baum (2):
>> doc: remove obsolete vector Tx explanations from mlx5 guide
>> doc: replace broken links in mlx guides
>>
>> Michal Krawczyk (5):
>> net/ena: remove unused enumeration
>> net/ena: remove unused offload variables
>> net/ena: skip timer if reset is triggered
>> net/ena: fix meta descriptor DF flag setup
>> net/ena: fix checksum flag for L4
>>
>> Min Hu (Connor) (4):
>> net/bonding: fix promiscuous and allmulticast state
>> net/bonding: fix reference count on mbufs
>> app/testpmd: fix bonding mode set
>> app/testpmd: check starting port is not in bonding
>>
>> Naga Harish K S V (1):
>> eventdev/eth_tx: fix queue add error code
>>
>> Pablo de Lara (1):
>> test/efd: fix sockets mask size
>>
>> Rahul Bhansali (1):
>> examples/l3fwd: fix buffer overflow in Tx
>>
>> Rahul Lakkireddy (1):
>> net/cxgbe: fix dangling pointer by mailbox access rework
>>
>> Raja Zidane (3):
>> app/compress-perf: fix socket ID type during init
>> app/compress-perf: fix number of queue pairs to setup
>> compressdev: fix socket ID type
>>
>> Reshma Pattan (1):
>> app/pdump: abort on multi-core capture limit
>>
>> Sean Morrissey (1):
>> app/testpmd: fix dereference before null check
>>
>> Stephen Douthit (1):
>> net/ixgbe: fix FSP check for X550EM devices
>>
>> Stephen Hemminger (4):
>> eal/linux: log hugepage create errors with filename
>> net/memif: remove unnecessary Rx interrupt stub
>> ipc: end multiprocess thread during cleanup
>> vfio: cleanup the multiprocess sync handle
>>
>> Steve Yang (2):
>> net/ice: build failure with make and GCC > 11
>> eal/linux: fix illegal memory access in uevent handler
>>
>> Thomas Monjalon (1):
>> app/testpmd: fix build without drivers
>>
>> Tianfei Zhang (1):
>> raw/ifpga/base: fix SPI transaction
>>
>> Wei Huang (5):
>> raw/ifpga/base: fix port feature ID
>> raw/ifpga: fix variable initialization in probing
>> raw/ifpga: fix interrupt handle allocation
>> raw/ifpga: fix monitor thread
>> raw/ifpga: fix build with optimization
>>
>> Weiguo Li (5):
>> bus/dpaa: fix C++ include guard
>> net/cxgbe: remove useless C++ include guard
>> net/dpaa2: remove useless C++ include guard
>> net/memif: remove pointer deference before null check
>> compress/octeontx: fix null pointer dereference
>>
>> Xiaoyu Min (1):
>> net/mlx5: reject jump to root table
>>
>> Xueming Li (1):
>> net/virtio: fix Tx queue 0 overriden by queue 128
>>
>> Yu Wenjun (1):
>> net/bonding: fix RSS with early configure
>>
>> Yunjian Wang (6):
>> net/bonding: fix mode type mismatch
>> net/ice: fix link up when starting device
>> net/virtio-user: check FD flags getting failure
>> ring: fix error code when creating ring
>> net/ixgbe: check filter init failure
>> net/ixgbe: reset security context pointer on close
>>
>
>
> --
> Regards,
> Kalesh A P
>
--
Christian Ehrhardt
Staff Engineer, Ubuntu Server
Canonical Ltd
[-- Attachment #2: Type: text/html, Size: 12325 bytes --]
next prev parent reply other threads:[~2022-04-04 6:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-21 11:55 christian.ehrhardt
2022-03-30 11:04 ` Jiang, YuX
2022-03-31 10:00 ` Christian Ehrhardt
2022-04-06 6:49 ` Christian Ehrhardt
2022-04-06 7:05 ` Jiang, YuX
2022-04-06 8:40 ` Christian Ehrhardt
2022-03-31 10:50 ` Christian Ehrhardt
2022-04-01 14:34 ` Kalesh Anakkur Purayil
2022-04-04 6:35 ` Christian Ehrhardt [this message]
2022-04-04 6:39 ` Christian Ehrhardt
2022-04-04 7:02 ` Ali Alnubani
2022-04-04 6:52 ` Ali Alnubani
2022-04-04 7:12 ` Christian Ehrhardt
2022-04-06 2:11 ` Pei Zhang
2022-04-06 6:45 ` Christian Ehrhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAATJJ0KguR7HsR5Sby2yYwmDb1QpNb=jjN6u3efEH_FBDUUrJA@mail.gmail.com' \
--to=christian.ehrhardt@canonical.com \
--cc=Abhishek.Marathe@microsoft.com \
--cc=alialnu@nvidia.com \
--cc=benjamin.walker@intel.com \
--cc=bluca@debian.org \
--cc=dev@dpdk.org \
--cc=drc@linux.vnet.ibm.com \
--cc=hariprasad.govindharajan@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=ian.stokes@intel.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=juhlee@microsoft.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=ktraynor@redhat.com \
--cc=pezhang@redhat.com \
--cc=qian.q.xu@intel.com \
--cc=rasland@nvidia.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=yuan.peng@intel.com \
--cc=zhaoyan.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).