Re: [dpdk-dev] Working of pipeline in a given config file and regarding user-defined actions in IP_PIPELINE application

[Nidhia Varghese <nidhiavarghese93@gmail.com>]

Hi Cristian,

Thanks for your help.

If that is the case, is there any way to use the incoming port as a key for
table lookup? I need to use incoming port along with some other fields of
each packet as the key for my application.

On Mon, Apr 10, 2017 at 3:09 PM, Dumitrescu, Cristian <
cristian.dumitrescu@intel.com> wrote:

> Hi Nidhia,
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Nidhia Varghese
> > Sent: Monday, April 10, 2017 8:27 AM
> > To: Singh, Jasvinder <jasvinder.singh@intel.com>
> > Cc: dev@dpdk.org; users@dpdk.org
> > Subject: Re: [dpdk-dev] Working of pipeline in a given config file and
> > regarding user-defined actions in IP_PIPELINE application
> >
> > Hi Jasvinder,
> >
> > Thanks for your help.
> >
> > What I understood from the programmer's guide is that, port action
> handler
> > can be assigned to each input/output port to define actions to be
> executed
> > on each input packet that is received by the port. But one pipeline can
> > have more than one input and output ports. Actions that has to be done to
> > packets coming from each port can be different even though it is in the
> > same pipeline.
>
> Yes, this is correct, the librte_pipeline allows you to configure
> independent action handlers for each input port/output port/table in the
> pipeline.
>
> How can we define different actions for different ports in
> > this case where we have more than one ports for reception or transmission
> > in same pipeline? Which parameter is used to distinguish the ports?
>
> However, in the ip_pipeline application so far, only the pass-through
> pipeline provide an example of an input port action handler, and the same
> AH is set up for all input ports. If you want different AH for different
> ports, you probably need to implement your own AH functions and add some
> pipeline type specific parameters to the configuration file syntax in order
> to assign different actions to different ports.
>
> >
> > Thanks,
> > Nidhia
> >
>
> Regards,
> Cristian
>
>


-- 

Regards,
Nidhia Varghese