[dpdk-dev] to wait or not to wait.. DPDK & OVS ixgbe with fibre disconnected

[David Evans <davidjoshuaevans@gmail.com>]

Hi!

We have a thread running on ovs discuss. - Can you contribute?

regarding ixgbe_ethdev.c

  ixgbe_dev_link_update() doesn't honour wait_to_complete flag always.

Basically, where you have 'wait_to_complete' set to 0, we are still having
to wait sometimes
Dpdk is always attempting setup if intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG
Which happens if you unplug fibre, or don't plug it in.

is there a better way to handle this? It is causing OVS to get stuck
busy... on the thread that calls this.

eg:
 in line 4000  -  ixgbe_setup_link(hw,speed,true)

        if ((intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG) &&
                ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
                speed = hw->phy.autoneg_advertised;
                if (!speed)
                        ixgbe_get_link_capabilities(hw, &speed, &autoneg);
                ixgbe_setup_link(hw, speed, true);
        }


or also...

#0  rte_delay_us_block (us=100000) at
/usr/src/debug/dpdk-17.11.3/lib/librte_eal/common/eal_common_timer.c:59
#1  0x00007f548f79ceec in ixgbe_setup_mac_link_multispeed_fiber
(hw=0x7f543fc2f680, speed=128, autoneg_wait_to_complete=0) at
/usr/src/debug/dpdk-17.11.3/drivers/net/ixgbe/base/ixgbe_common.c:5155
#2  0x00007f548f7c2cb2 in ixgbe_dev_link_update_share (vf=0,
wait_to_complete=0, dev=0x7f549492d480 <rte_eth_devices+82560>) at
/usr/src/debug/dpdk-17.11.3/drivers/net/ixgbe/ixgbe_ethdev.c:4000
#3  ixgbe_dev_link_update (dev=0x7f549492d480 <rte_eth_devices+82560>,
wait_to_complete=0) at
/usr/src/debug/dpdk-17.11.3/drivers/net/ixgbe/ixgbe_ethdev.c:4070

Thanks so much

Dave.