DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: Jerin Jacob <jerinjacobk@gmail.com>
Cc: Jiawei Wang <jiaweiw@mellanox.com>, Ori Kam <orika@mellanox.com>,
	 Slava Ovsiienko <viacheslavo@mellanox.com>,
	Matan Azrad <matan@mellanox.com>, dpdk-dev <dev@dpdk.org>,
	 Thomas Monjalon <thomas@monjalon.net>,
	Raslan Darawsheh <rasland@mellanox.com>,
	ian.stokes@intel.com, fbl@redhat.com
Subject: Re: [dpdk-dev] [PATCH v2 1/7] ethdev: introduce sample action for rte flow
Date: Sat, 4 Jul 2020 07:44:04 -0700
Message-ID: <CACZ4nhsF9hyaskBo8AnMZudvTtRFLp8fqTA19H_d0fUJ4YtAWg@mail.gmail.com> (raw)
In-Reply-To: <CALBAE1N2rv0e79qAKe8Zmhssi4NOu1_7oHX63e_qpqrkphUojQ@mail.gmail.com>

On Thu, Jul 2, 2020 at 11:40 PM Jerin Jacob <jerinjacobk@gmail.com> wrote:

> On Fri, Jul 3, 2020 at 12:13 AM Jiawei Wang <jiaweiw@mellanox.com> wrote:
> >
> > When using full offload, all traffic will be handled by the HW, and
> > directed to the requested vf or wire, the control application loses
> > visibility on the traffic.
> > So there's a need for an action that will enable the control application
> > some visibility.
> >
> > The solution is introduced a new action that will sample the incoming
> > traffic and send a duplicated traffic in some predefined ratio to the
> > application, while the original packet will continue to the target
> > destination.
> >
> > The packets sampled equals is '1/ratio', if the ratio value be set to 1
> > , means that the packets would be completely mirrored. The sample packet
> > can be assigned with different set of actions from the original packet.
> >
> > In order to support the sample packet in rte_flow, new rte_flow action
> > definition RTE_FLOW_ACTION_TYPE_SAMPLE and structure
> rte_flow_action_sample
> > will be introduced.
> >
> > Signed-off-by: Jiawei Wang <jiaweiw@mellanox.com>
> > Acked-by: Ori Kam <orika@mellanox.com>
>
> When adding overlapping API(rte_eth_mirror_rule_set()) in the same
> library(ethdev).
> Please depreciate the old API.
> We should not have two separate paths for the same function in the
> same ethdev library. It is pain for app and driver developers.
>
> With the above deprecation notice,
> Acked-by: Jerin Jacob <jerinj@marvell.com>
>
I am fine with the proposed RTE_FLOW_ACTION_TYPE_SAMPLE. But..

When rte_eth_mirror_rule_set() is deprecated, are we going to add
RTE_FLOW_ACTION_TYPE_MIRROR for full fledged mirror action?
Or we are proposing to use RTE_FLOW_ACTION_TYPE_SAMPLE with
ratio of 1 to mirror all packets, thereby doing away with the need for
a separate RTE_FLOW_ACTION_TYPE_MIRROR?



>
>
> > ---
> >  doc/guides/prog_guide/rte_flow.rst     | 25 +++++++++++++++++++++++++
> >  doc/guides/rel_notes/release_20_08.rst |  6 ++++++
> >  lib/librte_ethdev/rte_flow.c           |  1 +
> >  lib/librte_ethdev/rte_flow.h           | 28 ++++++++++++++++++++++++++++
> >  4 files changed, 60 insertions(+)
> >
> > diff --git a/doc/guides/prog_guide/rte_flow.rst
> b/doc/guides/prog_guide/rte_flow.rst
> > index d5dd18c..50dfe1f 100644
> > --- a/doc/guides/prog_guide/rte_flow.rst
> > +++ b/doc/guides/prog_guide/rte_flow.rst
> > @@ -2645,6 +2645,31 @@ timeout passed without any matching on the flow.
> >     | ``context``  | user input flow context         |
> >     +--------------+---------------------------------+
> >
> > +Action: ``SAMPLE``
> > +^^^^^^^^^^^^^^^^^^
> > +
> > +Adds a sample action to a matched flow.
> > +
> > +The matching packets will be duplicated to a special queue or vport
> > +with the predefined ``ratio``, the packets sampled equals is '1/ratio'.
> > +All the packets continues to the target destination.
> > +
> > +When the ``ratio`` is set to 1 then the packets will be 100% mirrored.
> > +``actions`` represent the different set of actions for the sampled or
> mirrored
> > +packets.
> > +
> > +.. _table_rte_flow_action_sample:
> > +
> > +.. table:: SAMPLE
> > +
> > +   +--------------+---------------------------------+
> > +   | Field        | Value                           |
> > +   +==============+=================================+
> > +   | ``ratio``    | 32 bits sample ratio value      |
> > +   +--------------+---------------------------------+
> > +   | ``actions``  | sub-action list for sampling    |
> > +   +--------------+---------------------------------+
> > +
> >  Negative types
> >  ~~~~~~~~~~~~~~
> >
> > diff --git a/doc/guides/rel_notes/release_20_08.rst
> b/doc/guides/rel_notes/release_20_08.rst
> > index 5cbc4ce..313e8d3 100644
> > --- a/doc/guides/rel_notes/release_20_08.rst
> > +++ b/doc/guides/rel_notes/release_20_08.rst
> > @@ -81,6 +81,12 @@ New Features
> >    * Added support for virtio queue statistics.
> >    * Added support for MTU update.
> >
> > +* **Added flow-based traffic sampling support.**
> > +
> > +  Added new action: ``RTE_FLOW_ACTION_TYPE_SAMPLE`` to duplicate the
> matching
> > +  packets with given ratio and redirects to vport or queue. The sampled
> packets
> > +  also can be assigned with an additional optional actions.
> > +
> >  * **Updated Marvell octeontx2 ethdev PMD.**
> >
> >    Updated Marvell octeontx2 driver with cn98xx support.
> > diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
> > index 1685be5..733871d 100644
> > --- a/lib/librte_ethdev/rte_flow.c
> > +++ b/lib/librte_ethdev/rte_flow.c
> > @@ -173,6 +173,7 @@ struct rte_flow_desc_data {
> >         MK_FLOW_ACTION(SET_IPV4_DSCP, sizeof(struct
> rte_flow_action_set_dscp)),
> >         MK_FLOW_ACTION(SET_IPV6_DSCP, sizeof(struct
> rte_flow_action_set_dscp)),
> >         MK_FLOW_ACTION(AGE, sizeof(struct rte_flow_action_age)),
> > +       MK_FLOW_ACTION(SAMPLE, sizeof(struct rte_flow_action_sample)),
> >  };
> >
> >  int
> > diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> > index b0e4199..c9cd80d 100644
> > --- a/lib/librte_ethdev/rte_flow.h
> > +++ b/lib/librte_ethdev/rte_flow.h
> > @@ -2099,6 +2099,13 @@ enum rte_flow_action_type {
> >          * see enum RTE_ETH_EVENT_FLOW_AGED
> >          */
> >         RTE_FLOW_ACTION_TYPE_AGE,
> > +
> > +       /**
> > +        * Redirects specific ratio of packets to vport or queue.
> > +        *
> > +        * See struct rte_flow_action_sample.
> > +        */
> > +       RTE_FLOW_ACTION_TYPE_SAMPLE,
> >  };
> >
> >  /**
> > @@ -2709,6 +2716,27 @@ struct rte_flow_action {
> >  struct rte_flow;
> >
> >  /**
> > + * @warning
> > + * @b EXPERIMENTAL: this structure may change without prior notice
> > + *
> > + * RTE_FLOW_ACTION_TYPE_SAMPLE
> > + *
> > + * Adds a sample action to a matched flow.
> > + *
> > + * The matching packets will be duplicated to a special queue or vport
> > + * in the predefined probabiilty, All the packets continues processing
> > + * on the default flow path.
> > + *
> > + * When the sample ratio is set to 1 then the packets will be 100%
> mirrored.
> > + * Additional action list be supported to add for sampled or mirrored
> packets.
> > + */
> > +struct rte_flow_action_sample {
> > +       const uint32_t ratio; /**< packets sampled equals to '1/ratio'.
> */
> > +       const struct rte_flow_action *actions;
> > +               /**< sub-action list specific for the sampling hit
> cases. */
> > +};
> > +
> > +/**
> >   * Verbose error types.
> >   *
> >   * Most of them provide the type of the object referenced by struct
> > --
> > 1.8.3.1
> >
>

  parent reply	other threads:[~2020-07-04 14:44 UTC|newest]

Thread overview: 186+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-25 16:26 [dpdk-dev] [PATCH 0/8] support the flow-based traffic sampling Jiawei Wang
2020-06-25 16:26 ` [dpdk-dev] [PATCH 1/8] ethdev: introduce sample action for rte flow Jiawei Wang
2020-06-25 17:55   ` Jerin Jacob
2020-06-25 19:29     ` Thomas Monjalon
2020-06-26 10:35       ` Jerin Jacob
2020-06-26 10:45         ` Thomas Monjalon
2020-06-26 11:10           ` Jerin Jacob
2020-06-28  8:14             ` Andrew Rybchenko
2020-06-28 13:16             ` Jiawei(Jonny) Wang
2020-06-28 13:37               ` Jerin Jacob
2020-06-28 15:52                 ` Jiawei(Jonny) Wang
2020-07-02  0:18                   ` Stephen Hemminger
2020-07-02  7:16                     ` Ori Kam
2020-06-28  8:27   ` Andrew Rybchenko
2020-06-28 16:16     ` Jiawei(Jonny) Wang
2020-06-28 16:18       ` Andrew Rybchenko
2020-06-29 11:40         ` Ori Kam
2020-06-29 13:11           ` Andrew Rybchenko
2020-06-29 14:29             ` Ori Kam
2020-06-30 16:42               ` Ori Kam
2020-07-01  9:37   ` Ori Kam
2020-06-25 16:26 ` [dpdk-dev] [PATCH 2/8] common/mlx5: glue for default miss and sample action Jiawei Wang
2020-06-30 15:25   ` Ori Kam
2020-06-25 16:26 ` [dpdk-dev] [PATCH 3/8] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-06-30 17:38   ` Ori Kam
2020-06-25 16:26 ` [dpdk-dev] [PATCH 4/8] net/mlx5: add the validate sample action Jiawei Wang
2020-06-30 17:59   ` Ori Kam
2020-07-01 13:55     ` Jiawei(Jonny) Wang
2020-06-25 16:26 ` [dpdk-dev] [PATCH 5/8] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-06-30 18:18   ` Ori Kam
2020-06-25 16:26 ` [dpdk-dev] [PATCH 6/8] net/mlx5: update translate function for sample action Jiawei Wang
2020-06-30 19:54   ` Ori Kam
2020-07-01 15:06     ` Jiawei(Jonny) Wang
2020-06-25 16:26 ` [dpdk-dev] [PATCH 7/8] net/mlx5: update the metadata register c0 support Jiawei Wang
2020-06-25 16:26 ` [dpdk-dev] [PATCH 8/8] app/testpmd: add testpmd command for sample action Jiawei Wang
2020-06-30 15:23   ` Ori Kam
2020-07-02 17:43 ` [dpdk-dev] [PATCH 0/7] support the flow-based traffic sampling Jiawei Wang
2020-07-02 17:43   ` [dpdk-dev] [PATCH 1/7] ethdev: introduce sample action for rte flow Jiawei Wang
2020-07-02 17:43   ` [dpdk-dev] [PATCH 2/7] common/mlx5: glue for sample action Jiawei Wang
2020-07-02 17:43   ` [dpdk-dev] [PATCH 3/7] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-07-02 17:43   ` [dpdk-dev] [PATCH 4/7] net/mlx5: add the validate sample action Jiawei Wang
2020-07-02 17:43   ` [dpdk-dev] [PATCH 5/7] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-07-02 17:43   ` [dpdk-dev] [PATCH 6/7] net/mlx5: update translate function for sample action Jiawei Wang
2020-07-02 17:43   ` [dpdk-dev] [PATCH 7/7] app/testpmd: add testpmd command " Jiawei Wang
2020-07-02 18:43 ` [dpdk-dev] [PATCH v2 0/7] [v2] support the flow-based traffic sampling Jiawei Wang
2020-07-02 18:43   ` [dpdk-dev] [PATCH v2 1/7] ethdev: introduce sample action for rte flow Jiawei Wang
2020-07-03  6:39     ` Jerin Jacob
2020-07-03 14:55       ` Matan Azrad
2020-07-03 15:08         ` Jerin Jacob
2020-07-03 15:27           ` Matan Azrad
2020-07-03 15:27           ` Thomas Monjalon
2020-07-03 15:36             ` Jerin Jacob
2020-07-04 19:26               ` Matan Azrad
2020-07-05  1:21                 ` Jerin Jacob
2020-07-05  4:52                   ` Matan Azrad
2020-07-06  8:37                     ` Jerin Jacob
2020-07-04 14:35             ` Ajit Khaparde
2020-07-04 14:44       ` Ajit Khaparde [this message]
2020-07-05  8:55         ` Thomas Monjalon
2020-07-05 23:54           ` Ajit Khaparde
2020-07-04 13:04     ` Andrew Rybchenko
2020-07-05 10:18       ` Ori Kam
2020-07-05 23:54         ` Ajit Khaparde
2020-07-06  6:53         ` Jiawei(Jonny) Wang
2020-07-02 18:43   ` [dpdk-dev] [PATCH v2 2/7] common/mlx5: glue for sample action Jiawei Wang
2020-07-02 18:43   ` [dpdk-dev] [PATCH v2 3/7] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-07-02 18:43   ` [dpdk-dev] [PATCH v2 4/7] net/mlx5: add the validate sample action Jiawei Wang
2020-07-05 19:30     ` Ori Kam
2020-07-02 18:43   ` [dpdk-dev] [PATCH v2 5/7] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-07-02 18:43   ` [dpdk-dev] [PATCH v2 6/7] net/mlx5: update translate function for sample action Jiawei Wang
2020-07-05 19:32     ` Ori Kam
2020-07-02 18:43   ` [dpdk-dev] [PATCH v2 7/7] app/testpmd: add testpmd command " Jiawei Wang
2020-07-06 17:51   ` [dpdk-dev] [PATCH v3 0/7] support the flow-based traffic sampling Jiawei Wang
2020-07-06 17:51     ` [dpdk-dev] [PATCH v3 1/7] ethdev: introduce sample action for rte flow Jiawei Wang
2020-07-07 10:26       ` Andrew Rybchenko
2020-07-06 17:51     ` [dpdk-dev] [PATCH v3 2/7] common/mlx5: glue for sample action Jiawei Wang
2020-07-06 17:51     ` [dpdk-dev] [PATCH v3 3/7] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-07-06 17:51     ` [dpdk-dev] [PATCH v3 4/7] net/mlx5: add the validate sample action Jiawei Wang
2020-07-06 17:51     ` [dpdk-dev] [PATCH v3 5/7] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-07-06 17:51     ` [dpdk-dev] [PATCH v3 6/7] net/mlx5: update translate function for sample action Jiawei Wang
2020-07-06 17:51     ` [dpdk-dev] [PATCH v3 7/7] app/testpmd: add testpmd command " Jiawei Wang
2020-07-06 18:23     ` [dpdk-dev] [PATCH v3 0/7] support the flow-based traffic sampling Stephen Hemminger
2020-07-06 19:14       ` Ori Kam
2020-08-26 16:01     ` [dpdk-dev] [PATCH v4 " Jiawei Wang
2020-08-26 16:01       ` [dpdk-dev] [PATCH v4 1/7] ethdev: introduce sample action for rte flow Jiawei Wang
2020-08-26 16:02       ` [dpdk-dev] [PATCH v4 2/7] common/mlx5: glue for sample action Jiawei Wang
2020-08-26 16:02       ` [dpdk-dev] [PATCH v4 3/7] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-08-26 16:02       ` [dpdk-dev] [PATCH v4 4/7] net/mlx5: add the validate sample action Jiawei Wang
2020-08-26 16:02       ` [dpdk-dev] [PATCH v4 5/7] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-08-26 16:02       ` [dpdk-dev] [PATCH v4 6/7] net/mlx5: update translate function for sample action Jiawei Wang
2020-08-26 16:02       ` [dpdk-dev] [PATCH v4 7/7] app/testpmd: add testpmd command " Jiawei Wang
2020-08-27 15:01       ` [dpdk-dev] [PATCH v5 0/7] support the flow-based traffic sampling Jiawei Wang
2020-08-27 15:01         ` [dpdk-dev] [PATCH v5 1/7] ethdev: introduce sample action for rte flow Jiawei Wang
2020-09-04  4:17           ` Ajit Khaparde
2020-09-08 14:38             ` Ori Kam
2020-08-27 15:01         ` [dpdk-dev] [PATCH v5 2/7] common/mlx5: glue for sample action Jiawei Wang
2020-08-27 15:01         ` [dpdk-dev] [PATCH v5 3/7] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-08-27 15:01         ` [dpdk-dev] [PATCH v5 4/7] net/mlx5: add the validate sample action Jiawei Wang
2020-08-27 15:01         ` [dpdk-dev] [PATCH v5 5/7] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-08-27 15:01         ` [dpdk-dev] [PATCH v5 6/7] net/mlx5: update translate function for sample action Jiawei Wang
2020-08-27 15:01         ` [dpdk-dev] [PATCH v5 7/7] app/testpmd: add testpmd command " Jiawei Wang
2020-09-09  6:48         ` [dpdk-dev] [PATCH v6 00/12] support the flow-based traffic sampling Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 01/12] ethdev: introduce sample action for rte flow Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 02/12] common/mlx5: glue for sample action Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 03/12] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 04/12] net/mlx5: add the validate sample action Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 05/12] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 06/12] net/mlx5: update translate function for sample action Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 07/12] app/testpmd: add testpmd command " Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 08/12] common/mlx5: add glue function for mirroring Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 09/12] net/mlx5: update validation for mirroring flow Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 10/12] net/mlx5: update translate function for mirror Jiawei Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 11/12] app/testpmd: add port and encap support for sample action Jiawei Wang
2020-09-21 22:27             ` Ajit Khaparde
2020-09-22 12:32               ` Jiawei(Jonny) Wang
2020-09-09  6:48           ` [dpdk-dev] [PATCH v6 12/12] net/mlx5: support the native port id actions for mirroring Jiawei Wang
2020-09-22 17:19           ` [dpdk-dev] [PATCH v7 00/12] support the flow-based traffic sampling Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 01/12] ethdev: introduce sample action for rte flow Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 02/12] common/mlx5: glue for sample action Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 03/12] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 04/12] net/mlx5: add the validate sample action Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 05/12] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 06/12] net/mlx5: update translate function for sample action Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 07/12] app/testpmd: add testpmd command " Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 08/12] common/mlx5: add glue function for mirroring Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 09/12] net/mlx5: update validation for mirroring flow Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 10/12] net/mlx5: update translate function for mirror Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 11/12] app/testpmd: add port and encap support for sample action Jiawei Wang
2020-09-22 17:19             ` [dpdk-dev] [PATCH v7 12/12] doc: add E-Switch sample flow limitation description Jiawei Wang
2020-09-27  6:18             ` [dpdk-dev] [PATCH v8 00/13] support the flow-based traffic sampling Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 01/13] ethdev: introduce sample action for rte flow Jiawei Wang
2020-10-01 20:51                 ` Ajit Khaparde
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 02/13] common/mlx5: glue for sample action Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 03/13] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 04/13] net/mlx5: add the validate sample action Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 05/13] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 06/13] net/mlx5: update translate function for sample action Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 07/13] app/testpmd: add testpmd command " Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 08/13] common/mlx5: add glue function for mirroring Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 09/13] net/mlx5: update validation for mirroring flow Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 10/13] net/mlx5: update translate function for mirror Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 11/13] app/testpmd: add port and encap support for sample action Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 12/13] doc: add the sample flow limitation description Jiawei Wang
2020-09-27  6:18               ` [dpdk-dev] [PATCH v8 13/13] doc: update offload dependencies document Jiawei Wang
2020-09-27  6:30                 ` Asaf Penso
2020-10-09 13:46               ` [dpdk-dev] [PATCH v9 0/3] support the flow-based traffic sampling Jiawei Wang
2020-10-09 13:46                 ` [dpdk-dev] [PATCH v9 1/3] ethdev: introduce sample action for rte flow Jiawei Wang
2020-10-09 22:07                   ` Ajit Khaparde
2020-10-09 13:46                 ` [dpdk-dev] [PATCH v9 2/3] app/testpmd: add testpmd command for sample action Jiawei Wang
2020-10-09 13:46                 ` [dpdk-dev] [PATCH v9 3/3] app/testpmd: add port and encap support " Jiawei Wang
2020-10-09 13:55                 ` [dpdk-dev] [PATCH v9 0/3] support the flow-based traffic sampling Jiawei(Jonny) Wang
2020-10-12 18:18                 ` Ferruh Yigit
2020-10-09 13:50               ` [dpdk-dev] [PATCH 00/10] Add sampling and mirroring support in MLX5 PMD Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 01/10] common/mlx5: glue for sample action Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 02/10] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 03/10] net/mlx5: add the validate sample action Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 04/10] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 05/10] net/mlx5: update translate function for sample action Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 06/10] common/mlx5: add glue function for mirroring Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 07/10] net/mlx5: update validation for mirroring flow Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 08/10] net/mlx5: update translate function for mirror Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 09/10] doc: add the sample flow limitation description Jiawei Wang
2020-10-09 13:50                 ` [dpdk-dev] [PATCH 10/10] doc: update offload dependencies document Jiawei Wang
2020-10-13  8:17                 ` [dpdk-dev] [PATCH v2 00/10] Add sampling and mirroring support in MLX5 PMD Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 01/10] common/mlx5: glue for sample action Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 02/10] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 03/10] net/mlx5: add the validate sample action Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 04/10] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 05/10] net/mlx5: update translate function for sample action Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 06/10] common/mlx5: add glue function for mirroring Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 07/10] net/mlx5: update validation for mirroring flow Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 08/10] net/mlx5: update translate function for mirror Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 09/10] doc: add the sample flow limitation description Jiawei Wang
2020-10-13  8:17                   ` [dpdk-dev] [PATCH v2 10/10] doc: update offload dependencies document Jiawei Wang
2020-10-13 14:11                   ` [dpdk-dev] [PATCH v3 00/10] Add sampling and mirroring support in MLX5 PMD Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 01/10] common/mlx5: glue for sample action Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 02/10] common/mlx5: query sampler object capability via DevX Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 03/10] net/mlx5: add the validate sample action Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 04/10] net/mlx5: split sample flow into two sub flows Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 05/10] net/mlx5: update translate function for sample action Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 06/10] common/mlx5: add glue function for mirroring Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 07/10] net/mlx5: update validation for mirroring flow Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 08/10] net/mlx5: update translate function for mirror Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 09/10] doc: add the sample flow limitation description Jiawei Wang
2020-10-13 14:11                     ` [dpdk-dev] [PATCH v3 10/10] doc: update offload dependencies document Jiawei Wang
2020-10-14 11:06                     ` [dpdk-dev] [PATCH v3 00/10] Add sampling and mirroring support in MLX5 PMD Raslan Darawsheh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CACZ4nhsF9hyaskBo8AnMZudvTtRFLp8fqTA19H_d0fUJ4YtAWg@mail.gmail.com \
    --to=ajit.khaparde@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=fbl@redhat.com \
    --cc=ian.stokes@intel.com \
    --cc=jerinjacobk@gmail.com \
    --cc=jiaweiw@mellanox.com \
    --cc=matan@mellanox.com \
    --cc=orika@mellanox.com \
    --cc=rasland@mellanox.com \
    --cc=thomas@monjalon.net \
    --cc=viacheslavo@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git