* [dpdk-dev] [PATCH 1/4] net/bnxt: update HSI structure
2021-07-12 8:04 [dpdk-dev] [PATCH 0/4] bnxt PMD patches Kalesh A P
@ 2021-07-12 8:04 ` Kalesh A P
2021-07-12 8:04 ` [dpdk-dev] [PATCH 2/4] net/bnxt: inform firmware about host MTU Kalesh A P
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Kalesh A P @ 2021-07-12 8:04 UTC (permalink / raw)
To: dev; +Cc: ajit.khaparde
From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
- HWRM version updated to 1.10.2.44
- Added corresponding driver changes for the Admin MTU field name change.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
---
drivers/net/bnxt/bnxt_hwrm.c | 14 +-
drivers/net/bnxt/hsi_struct_def_dpdk.h | 1202 ++++++++++++++++++++++++++++++--
2 files changed, 1166 insertions(+), 50 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 4593991..0568476 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -3340,7 +3340,7 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp, uint16_t *mtu)
}
if (mtu)
- *mtu = rte_le_to_cpu_16(resp->mtu);
+ *mtu = rte_le_to_cpu_16(resp->admin_mtu);
switch (resp->port_partition_type) {
case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0:
@@ -3468,7 +3468,7 @@ static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp,
uint32_t enables;
int rc;
- enables = HWRM_FUNC_CFG_INPUT_ENABLES_MTU |
+ enables = HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU |
HWRM_FUNC_CFG_INPUT_ENABLES_MRU |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS |
@@ -3488,7 +3488,7 @@ static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp,
}
req.flags = rte_cpu_to_le_32(bp->pf->func_cfg_flags);
- req.mtu = rte_cpu_to_le_16(BNXT_MAX_MTU);
+ req.admin_mtu = rte_cpu_to_le_16(BNXT_MAX_MTU);
req.mru = rte_cpu_to_le_16(BNXT_VNIC_MRU(bp->eth_dev->data->mtu));
req.num_rsscos_ctxs = rte_cpu_to_le_16(pf_resc->num_rsscos_ctxs);
req.num_stat_ctxs = rte_cpu_to_le_16(pf_resc->num_stat_ctxs);
@@ -3548,7 +3548,7 @@ bnxt_fill_vf_func_cfg_req_old(struct bnxt *bp,
struct hwrm_func_cfg_input *req,
int num_vfs)
{
- req->enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_MTU |
+ req->enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU |
HWRM_FUNC_CFG_INPUT_ENABLES_MRU |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS |
@@ -3559,9 +3559,9 @@ bnxt_fill_vf_func_cfg_req_old(struct bnxt *bp,
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS);
- req->mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu + RTE_ETHER_HDR_LEN +
- RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE *
- BNXT_NUM_VLANS);
+ req->admin_mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu + RTE_ETHER_HDR_LEN +
+ RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE *
+ BNXT_NUM_VLANS);
req->mru = rte_cpu_to_le_16(BNXT_VNIC_MRU(bp->eth_dev->data->mtu));
req->num_rsscos_ctxs = rte_cpu_to_le_16(bp->max_rsscos_ctx /
(num_vfs + 1));
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index f715bc6..4d7efb1 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -364,6 +364,8 @@ struct cmd_nums {
#define HWRM_QUEUE_VLANPRI_QCAPS UINT32_C(0x83)
#define HWRM_QUEUE_VLANPRI2PRI_QCFG UINT32_C(0x84)
#define HWRM_QUEUE_VLANPRI2PRI_CFG UINT32_C(0x85)
+ #define HWRM_QUEUE_GLOBAL_CFG UINT32_C(0x86)
+ #define HWRM_QUEUE_GLOBAL_QCFG UINT32_C(0x87)
#define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90)
#define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91)
#define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92)
@@ -438,6 +440,8 @@ struct cmd_nums {
#define HWRM_FW_STATE_UNQUIESCE UINT32_C(0xd8)
/* Tells the fw to collect dsc dump on a given port and lane. */
#define HWRM_PORT_DSC_DUMP UINT32_C(0xd9)
+ #define HWRM_PORT_EP_TX_QCFG UINT32_C(0xda)
+ #define HWRM_PORT_EP_TX_CFG UINT32_C(0xdb)
#define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0)
#define HWRM_REG_POWER_QUERY UINT32_C(0xe1)
#define HWRM_CORE_FREQUENCY_QUERY UINT32_C(0xe2)
@@ -535,6 +539,10 @@ struct cmd_nums {
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124)
/* Experimental - DEPRECATED */
#define HWRM_CFA_TFLIB UINT32_C(0x125)
+ /* Experimental */
+ #define HWRM_CFA_LAG_GROUP_MEMBER_RGTR UINT32_C(0x126)
+ /* Experimental */
+ #define HWRM_CFA_LAG_GROUP_MEMBER_UNRGTR UINT32_C(0x127)
/* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */
#define HWRM_ENGINE_CKV_STATUS UINT32_C(0x12e)
/* Engine CKV - Add a new CKEK used to encrypt keys. */
@@ -637,6 +645,18 @@ struct cmd_nums {
#define HWRM_FUNC_SPD_CFG UINT32_C(0x19a)
/* Query SoC packet DMA settings */
#define HWRM_FUNC_SPD_QCFG UINT32_C(0x19b)
+ /* PTP - Queries configuration of timesync IO pins. */
+ #define HWRM_FUNC_PTP_PIN_QCFG UINT32_C(0x19c)
+ /* PTP - Configuration of timesync IO pins. */
+ #define HWRM_FUNC_PTP_PIN_CFG UINT32_C(0x19d)
+ /* PTP - Configuration for disciplining PHC. */
+ #define HWRM_FUNC_PTP_CFG UINT32_C(0x19e)
+ /* PTP - Queries for PHC timestamps. */
+ #define HWRM_FUNC_PTP_TS_QUERY UINT32_C(0x19f)
+ /* PTP - Extended PTP configuration. */
+ #define HWRM_FUNC_PTP_EXT_CFG UINT32_C(0x1a0)
+ /* PTP - Query extended PTP configuration. */
+ #define HWRM_FUNC_PTP_EXT_QCFG UINT32_C(0x1a1)
/* Experimental */
#define HWRM_SELFTEST_QLIST UINT32_C(0x200)
/* Experimental */
@@ -674,6 +694,26 @@ struct cmd_nums {
#define HWRM_MFG_PARAM_SEEPROM_READ UINT32_C(0x20f)
/* Tells the fw to get the health of seeprom data */
#define HWRM_MFG_PARAM_SEEPROM_HEALTH UINT32_C(0x210)
+ /*
+ * The command is used for certificate provisioning to export a
+ * Certificate Signing Request (CSR) from the device.
+ */
+ #define HWRM_MFG_PRVSN_EXPORT_CSR UINT32_C(0x211)
+ /*
+ * The command is used for certificate provisioning to import a
+ * CA-signed certificate chain to the device.
+ */
+ #define HWRM_MFG_PRVSN_IMPORT_CERT UINT32_C(0x212)
+ /*
+ * The command is used for certificate provisioning to query the
+ * provisioned state.
+ */
+ #define HWRM_MFG_PRVSN_GET_STATE UINT32_C(0x213)
+ /*
+ * The command is used to get the hash of the NVM configuration that is
+ * calculated during firmware boot.
+ */
+ #define HWRM_MFG_GET_NVM_MEASUREMENT UINT32_C(0x214)
/* Experimental */
#define HWRM_TF UINT32_C(0x2bc)
/* Experimental */
@@ -785,6 +825,25 @@ struct cmd_nums {
#define HWRM_DBG_QCFG UINT32_C(0xff21)
/* Set destination parameters for crashdump medium */
#define HWRM_DBG_CRASHDUMP_MEDIUM_CFG UINT32_C(0xff22)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_ALLOC UINT32_C(0xff23)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_FREE UINT32_C(0xff24)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_FLUSH UINT32_C(0xff25)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_QCAPS UINT32_C(0xff26)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_CW_CFG UINT32_C(0xff27)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_SCHED_CFG UINT32_C(0xff28)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_RUN UINT32_C(0xff29)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_DELIVERY_REQ UINT32_C(0xff2a)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_RESP_HDR UINT32_C(0xff2b)
+ #define HWRM_NVM_DEFRAG UINT32_C(0xffec)
#define HWRM_NVM_REQ_ARBITRATION UINT32_C(0xffed)
/* Experimental */
#define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee)
@@ -904,6 +963,13 @@ struct ret_codes {
*/
#define HWRM_ERR_CODE_RESOURCE_LOCKED UINT32_C(0x11)
/*
+ * This error code is reported by Firmware when an operation requested
+ * by a VF cannot be forwarded to the parent PF as required, either
+ * because the PF is down or otherwise doesn't have an appropriate
+ * async completion ring or associated forwarding buffers configured.
+ */
+ #define HWRM_ERR_CODE_PF_UNAVAILABLE UINT32_C(0x12)
+ /*
* This value indicates that the HWRM response is in TLV format and
* should be interpreted as one or more TLVs starting with the
* hwrm_resp_hdr TLV. This value is not an indication of any error
@@ -990,8 +1056,8 @@ struct hwrm_err_output {
#define HWRM_VERSION_MINOR 10
#define HWRM_VERSION_UPDATE 2
/* non-zero means beta version */
-#define HWRM_VERSION_RSVD 22
-#define HWRM_VERSION_STR "1.10.2.22"
+#define HWRM_VERSION_RSVD 44
+#define HWRM_VERSION_STR "1.10.2.44"
/****************
* hwrm_ver_get *
@@ -1547,7 +1613,18 @@ struct hwrm_ver_get_output {
* used with the short cmd request format.
*/
uint16_t max_ext_req_len;
- uint8_t unused_1[5];
+ /*
+ * This field returns the maximum request timeout value in seconds.
+ * For backward compatibility, a value of zero should be interpreted
+ * as the default value of 40 seconds. Drivers should always honor the
+ * maximum timeout, but are permitted to warn if a longer duration than
+ * this default is advertised. Values larger than 40 seconds should
+ * only be used as a stopgap measure to address a device limitation or
+ * for the purposes of test and debugging. The long term goal is for
+ * firmware to significantly reduce this value in the passage of time.
+ */
+ uint16_t max_req_timeout;
+ uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -7466,9 +7543,29 @@ struct hwrm_async_event_cmpl {
*/
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ECHO_REQUEST \
UINT32_C(0x42)
+ /*
+ * An event from firmware indicating who has been selected as the
+ * PHC Master or secondary. Also indicates the last time a failover
+ * happens.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PHC_MASTER \
+ UINT32_C(0x43)
+ /*
+ * An event from firmware showing the last PPS timestamp that has been
+ * latched.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PPS_TIMESTAMP \
+ UINT32_C(0x44)
+ /*
+ * An event from firmware indicating that an error has occurred.
+ * The driver should log the event so that an administrator can be
+ * aware that a problem has occurred that may need attention.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
/* Maximum Registrable event id. */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_MAX_RGTR_EVENT_ID \
- UINT32_C(0x43)
+ UINT32_C(0x46)
/*
* A trace log message. This contains firmware trace logs string
* embedded in the asynchronous message. This is an experimental
@@ -7761,6 +7858,9 @@ struct hwrm_async_event_cmpl_dcb_config_change {
/* APP configuration change */
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \
UINT32_C(0x4)
+ /* DSCP configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_DSCP \
+ UINT32_C(0x8)
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
@@ -8775,6 +8875,17 @@ struct hwrm_async_event_cmpl_vf_cfg_change {
HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE
/* Event specific data */
uint32_t event_data2;
+ /*
+ * This value indicates the VF ID of the VF whose configuration
+ * is changing if this async. event is sent to the parent PF.
+ * The firmware supports sending this to the parent PF if the
+ * `hwrm_func_qcaps.vf_cfg_async_for_pf_supported` value is 1.
+ * This value is undefined when the async. event is sent to the
+ * VF.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA2_VF_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA2_VF_ID_SFT 0
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
@@ -9667,6 +9778,230 @@ struct hwrm_async_event_cmpl_echo_request {
uint32_t event_data1;
} __rte_packed;
+/* hwrm_async_event_cmpl_phc_master (size:128b/16B) */
+struct hwrm_async_event_cmpl_phc_master {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async event is used to notify driver of changes
+ * in PHC master. Only one master function can configure
+ * PHC.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_PHC_MASTER \
+ UINT32_C(0x43)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_PHC_MASTER
+ /* Event specific data */
+ uint32_t event_data2;
+ /* This field provides the current master function. */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_MASTER_FID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_MASTER_FID_SFT \
+ 0
+ /* This field provides the current secondary function. */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_SEC_FID_MASK \
+ UINT32_C(0xffff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_SEC_FID_SFT \
+ 16
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates to the driver the type of PHC event. */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_MASK \
+ UINT32_C(0xf)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_SFT \
+ 0
+ /*
+ * Indicates PHC Master selection event. The master fid is
+ * specified in event_data2.phc_master_fid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_MASTER \
+ UINT32_C(0x1)
+ /*
+ * Indicates PHC Secondary selection event. The secondary fid is
+ * specified in event_data2.phc_sec_fid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_SECONDARY \
+ UINT32_C(0x2)
+ /*
+ * Indicates PHC failover event. Failover happens from
+ * event_data2.phc_master_fid to event_data2.phc_sec_fid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_FAILOVER \
+ UINT32_C(0x3)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_FAILOVER
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_pps_timestamp (size:128b/16B) */
+struct hwrm_async_event_cmpl_pps_timestamp {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message can be used to inform
+ * driver of the latest PPS timestamp that has been latched.
+ * When driver enables PPS event, Firmware will generate
+ * PPS timestamps every second, Firmware informs driver
+ * of this timestamp through the async event.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_PPS_TIMESTAMP \
+ UINT32_C(0x44)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_PPS_TIMESTAMP
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Indicates the PPS event type */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE \
+ UINT32_C(0x1)
+ /* This is an internal event. */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_INTERNAL \
+ UINT32_C(0x0)
+ /* This is an external event. */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_EXTERNAL \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_EXTERNAL
+ /*
+ * Indicates the pin number on which the event is
+ * received.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PIN_NUMBER_MASK \
+ UINT32_C(0xe)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PIN_NUMBER_SFT \
+ 1
+ /*
+ * Contains bits[47:32] of the upper PPS timestamp.
+ * Lower 32 bits are in event_data1. Together they
+ * provide the 48 bit PPS timestamp.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PPS_TIMESTAMP_UPPER_MASK \
+ UINT32_C(0xffff0)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PPS_TIMESTAMP_UPPER_SFT \
+ 4
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Contains the lower 32 bits of the PPS timestamp. */
+ uint32_t event_data1;
+ /* Contains the lower 32 bit PPS timestamp */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA1_PPS_TIMESTAMP_LOWER_MASK \
+ UINT32_C(0xffffffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA1_PPS_TIMESTAMP_LOWER_SFT \
+ 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_error_report (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * Indicates the type of error being reported. See section on Error
+ * Report event error_types for details on each error.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_DATA1_ERROR_TYPE_SFT 0
+} __rte_packed;
+
/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */
struct hwrm_async_event_cmpl_fw_trace_msg {
uint16_t type;
@@ -9837,6 +10172,220 @@ struct hwrm_async_event_cmpl_hwrm_error {
UINT32_C(0x1)
} __rte_packed;
+/* hwrm_async_event_cmpl_error_report_base (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report_base {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the type of error being reported. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_SFT \
+ 0
+ /* Reserved */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_RESERVED \
+ UINT32_C(0x0)
+ /*
+ * The NIC was subjected to an extended pause storm which caused it
+ * to disable flow control in order to avoid stalling the Tx path.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM \
+ UINT32_C(0x1)
+ /*
+ * The NIC received an interrupt storm on a TSIO pin being used as
+ * PPS_IN which caused it to disable the interrupt. The signal
+ * should be fixed to be a proper 1 PPS signal before re-enabling
+ * it. The pin number on which this signal was received is stored
+ * in event_data2 as pin_id.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_error_report_pause_storm (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report_pause_storm {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the type of error being reported. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_SFT \
+ 0
+ /*
+ * The NIC was subjected to an extended pause storm which caused it
+ * to disable flow control in order to avoid stalling the Tx path.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_error_report_invalid_signal (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report_invalid_signal {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ /* Indicates the TSIO pin on which invalid signal is detected. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA2_PIN_ID_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA2_PIN_ID_SFT \
+ 0
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the type of error being reported. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_SFT \
+ 0
+ /*
+ * The NIC received an interrupt storm on a TSIO pin being used as
+ * PPS_IN which caused it to disable the interrupt. The signal
+ * should be fixed to be a proper 1 PPS signal before re-enabling
+ * it. The pin number on which this signal was received is stored
+ * in event_data2 as pin_id.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL
+} __rte_packed;
+
/* metadata_base_msg (size:64b/8B) */
struct metadata_base_msg {
uint16_t md_type_link;
@@ -11341,6 +11890,48 @@ struct hwrm_func_qcaps_output {
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECHO_REQUEST_SUPPORTED \
UINT32_C(0x8000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * NPAR 1.2 on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_NPAR_1_2_SUPPORTED \
+ UINT32_C(0x10000)
+ /* When this bit is '1', it indicates that PTM feature is supported. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PTP_PTM_SUPPORTED \
+ UINT32_C(0x20000)
+ /* When this bit is '1', it indicates that PPS feature is supported. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PTP_PPS_SUPPORTED \
+ UINT32_C(0x40000)
+ /*
+ * When this bit is '1', it indicates that VF config. change
+ * async event is supported on the parent PF if the async.
+ * event is registered by the PF.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_VF_CFG_ASYNC_FOR_PF_SUPPORTED \
+ UINT32_C(0x80000)
+ /*
+ * When this bit is '1', the NIC supports configuration of
+ * partition_min_bw and partition_max_bw.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PARTITION_BW_SUPPORTED \
+ UINT32_C(0x100000)
+ /*
+ * When this bit is '1', the FW supports configuration of
+ * PCP and TPID values of the default VLAN.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_DFLT_VLAN_TPID_PCP_SUPPORTED \
+ UINT32_C(0x200000)
+ /* When this bit is '1', it indicates that HW and FW support KTLS. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_KTLS_SUPPORTED \
+ UINT32_C(0x400000)
+ /*
+ * When this bit is '1', the firmware supports HWRM_PORT_EP_TX_CFG
+ * and HWRM_PORT_EP_TX_QCFG for endpoint rate control, and additions
+ * to HWRM_QUEUE_GLOBAL_CFG and HWRM_QUEUE_GLOBAL_QCFG for receive
+ * rate control.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_EP_RATE_CONTROL \
+ UINT32_C(0x800000)
/* The maximum number of SCHQs supported by this device. */
uint8_t max_schqs;
uint8_t mpc_chnls_cap;
@@ -11379,8 +11970,9 @@ struct hwrm_func_qcaps_output {
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
@@ -11431,7 +12023,7 @@ struct hwrm_func_qcfg_input {
uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_func_qcfg_output (size:768b/96B) */
+/* hwrm_func_qcfg_output (size:832b/104B) */
struct hwrm_func_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
@@ -11578,6 +12170,14 @@ struct hwrm_func_qcfg_output {
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_ROOT \
UINT32_C(0x2000)
/*
+ * This flag indicates RDMA support for child VFS of
+ * a physical function.
+ * If set to 1, RoCE is supported on all child VFs.
+ * If set to 0, RoCE is disabled on all child VFs.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_ENABLE_RDMA_SRIOV \
+ UINT32_C(0x4000)
+ /*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
* MAC address is currently configured.
@@ -11620,12 +12220,15 @@ struct hwrm_func_qcfg_output {
/* The allocated number of vnics to the function. */
uint16_t alloc_vnics;
/*
- * The maximum transmission unit of the function.
- * If the reported mtu value is non-zero then it will used for the
- * rings allocated on this function. otherwise the default
+ * The maximum transmission unit of the function
+ * configured by the admin pf.
+ * If the reported mtu value is non-zero then it will be used for the
+ * rings allocated on this function, otherwise the default
* value is used if ring MTU is not specified.
+ * The driver cannot use any MTU bigger than this value
+ * if it is non-zero.
*/
- uint16_t mtu;
+ uint16_t admin_mtu;
/*
* The maximum receive unit of the function.
* For vnics allocated on this function, this default
@@ -11649,6 +12252,8 @@ struct hwrm_func_qcfg_output {
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
/* Network Partitioning 2.0 */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
+ /* Network Partitioning 1.2 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_2 UINT32_C(0x5)
/* Unknown */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \
UINT32_C(0xff)
@@ -11672,11 +12277,9 @@ struct hwrm_func_qcfg_output {
uint16_t dflt_vnic_id;
uint16_t max_mtu_configured;
/*
- * Minimum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
- * A value of 0 indicates the minimum bandwidth is not
- * configured.
+ * Minimum guaranteed transmit bandwidth for this function. When
+ * specified for a PF, does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates the minimum bandwidth is not configured.
*/
uint32_t min_bw;
/* The bandwidth value. */
@@ -11710,7 +12313,7 @@ struct hwrm_func_qcfg_output {
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
+ /* Value is in 1/100th of a percentage of link bandwidth. */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
@@ -11719,11 +12322,9 @@ struct hwrm_func_qcfg_output {
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
/*
- * Maximum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
- * A value of 0 indicates that the maximum bandwidth is not
- * configured.
+ * Maximum transmit rate for this function. When specified for a PF,
+ * does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates that the maximum bandwidth is not configured.
*/
uint32_t max_bw;
/* The bandwidth value. */
@@ -11757,7 +12358,7 @@ struct hwrm_func_qcfg_output {
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
+ /* Value is in 1/100th of a percentage of link bandwidth. */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
@@ -11926,7 +12527,94 @@ struct hwrm_func_qcfg_output {
*/
#define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_PRIMATE_ENABLED \
UINT32_C(0x10)
- uint8_t unused_2[6];
+ uint8_t unused_2[3];
+ /*
+ * Minimum guaranteed bandwidth for the network partition made up
+ * of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no minimum bandwidth is configured.
+ * The format of this field is defined to match min_bw, even though
+ * the partition minimum rate is always specified as a percentage.
+ */
+ uint32_t partition_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware never sets
+ * this field.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BYTES
+ /* Always percentage of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Bandwidth value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The maximum bandwidth that may be used by the network partition
+ * made up of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no maximum bandwidth is configured.
+ * The format of this field is defined to match max_bw, even though
+ * the partition bandwidth must be specified as a percentage.
+ */
+ uint32_t partition_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware never sets
+ * this field.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BYTES
+ /* Always a percentage of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The maximum transmission unit of the function
+ * configured by the host pf/vf.
+ * If the reported mtu value is non-zero then it will be used for the
+ * rings allocated on this function, otherwise the default
+ * value is used if ring MTU is not specified.
+ */
+ uint16_t host_mtu;
+ uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -11942,7 +12630,7 @@ struct hwrm_func_qcfg_output {
*****************/
-/* hwrm_func_cfg_input (size:768b/96B) */
+/* hwrm_func_cfg_input (size:832b/104B) */
struct hwrm_func_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
@@ -12208,10 +12896,10 @@ struct hwrm_func_cfg_input {
UINT32_C(0x40000000)
uint32_t enables;
/*
- * This bit must be '1' for the mtu field to be
+ * This bit must be '1' for the admin_mtu field to be
* configured.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU \
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU \
UINT32_C(0x1)
/*
* This bit must be '1' for the mru field to be
@@ -12364,6 +13052,33 @@ struct hwrm_func_cfg_input {
#define HWRM_FUNC_CFG_INPUT_ENABLES_MPC_CHNLS \
UINT32_C(0x2000000)
/*
+ * This bit must be '1' for the partition_min_bw field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_PARTITION_MIN_BW \
+ UINT32_C(0x4000000)
+ /*
+ * This bit must be '1' for the partition_max_bw field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_PARTITION_MAX_BW \
+ UINT32_C(0x8000000)
+ /*
+ * This bit must be '1' for the tpid field to be
+ * configured. This bit is only valid when dflt_vlan enable
+ * bit is set.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_TPID \
+ UINT32_C(0x10000000)
+ /*
+ * This bit must be '1' for the host_mtu field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_HOST_MTU \
+ UINT32_C(0x20000000)
+ /*
+ * This field can be used by the admin PF to configure
+ * mtu of foster PFs.
* The maximum transmission unit of the function.
* The HWRM should make sure that the mtu of
* the function does not exceed the mtu of the physical
@@ -12376,7 +13091,7 @@ struct hwrm_func_cfg_input {
* The HWRM should make sure that the mtu of each transmit
* ring that is assigned to a function has a valid mtu.
*/
- uint16_t mtu;
+ uint16_t admin_mtu;
/*
* The maximum receive unit of the function.
* The HWRM should make sure that the mru of
@@ -12440,9 +13155,9 @@ struct hwrm_func_cfg_input {
*/
uint32_t dflt_ip_addr[4];
/*
- * Minimum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
+ * Minimum guaranteed transmit bandwidth for this function. When
+ * specified for a PF, does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates the minimum bandwidth is not configured.
*/
uint32_t min_bw;
/* The bandwidth value. */
@@ -12485,9 +13200,9 @@ struct hwrm_func_cfg_input {
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
/*
- * Maximum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
+ * Maximum transmit rate for this function. When specified for a PF,
+ * does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates that the maximum bandwidth is not configured.
*/
uint32_t max_bw;
/* The bandwidth value. */
@@ -12707,7 +13422,111 @@ struct hwrm_func_cfg_input {
*/
#define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_DISABLE \
UINT32_C(0x200)
- uint8_t unused_0[4];
+ /*
+ * Minimum guaranteed bandwidth for the network partition made up
+ * of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no minimum bandwidth is configured. The sum of the
+ * minimum bandwidths for all partitions on a link must not exceed
+ * 100%.
+ * The format of this field is defined to match min_bw, even though
+ * it does not allow all the options for min_bw at this time.
+ */
+ uint32_t partition_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware ignores
+ * this field.
+ */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BYTES
+ /* Bandwidth units. Must be set to percent1_100. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The maximum bandwidth that may be used by the network partition
+ * made up of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no maximum bandwidth is configured.
+ * The format of this field is defined to match max_bw, even though it
+ * does not allow all the options for max_bw at this time.
+ */
+ uint32_t partition_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware ignores
+ * this field.
+ */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BYTES
+ /* Bandwidth units. Must be set to percent1_100. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The TPID for the function for which default VLAN
+ * is configured. If the dflt_vlan is not specified
+ * with the TPID, FW returns error. If the TPID is
+ * not specified with dflt_vlan, the default TPID of
+ * 0x8100 will be used. This field is specified in
+ * network byte order.
+ */
+ uint16_t tpid;
+ /*
+ * This field can be used by the host PF to configure
+ * mtu value.
+ * The maximum transmission unit of the function.
+ * The HWRM should make sure that the mtu of
+ * the function does not exceed the mtu of the physical
+ * port that this function is associated with.
+ *
+ * In addition to configuring mtu per function, it is
+ * possible to configure mtu per transmit ring.
+ * By default, the mtu of each transmit ring associated
+ * with a function is equal to the mtu of the function.
+ * The HWRM should make sure that the mtu of each transmit
+ * ring that is assigned to a function has a valid mtu.
+ */
+ uint16_t host_mtu;
} __rte_packed;
/* hwrm_func_cfg_output (size:128b/16B) */
@@ -13275,6 +14094,15 @@ struct hwrm_func_drv_rgtr_input {
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FAST_RESET_SUPPORT \
UINT32_C(0x80)
+ /*
+ * When this bit is 1, the function's driver is indicating the
+ * support of handling the vnic_rss_cfg's INVALID_PARAM error
+ * returned by firmware. Firmware returns error, if host driver
+ * configures the invalid hash_types bit combination for a given
+ * IP version.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_RSS_STRICT_HASH_TYPE_SUPPORT \
+ UINT32_C(0x100)
uint32_t enables;
/*
* This bit must be '1' for the os_type field to be
@@ -14078,7 +14906,7 @@ struct hwrm_func_backing_store_qcaps_input {
uint64_t resp_addr;
} __rte_packed;
-/* hwrm_func_backing_store_qcaps_output (size:704b/88B) */
+/* hwrm_func_backing_store_qcaps_output (size:832b/104B) */
struct hwrm_func_backing_store_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
@@ -14234,6 +15062,18 @@ struct hwrm_func_backing_store_qcaps_output {
#define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_MRAV \
UINT32_C(0x20)
/*
+ * If this bit is '1' then the Tx KTLS context type should be
+ * initialized with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_TKC \
+ UINT32_C(0x40)
+ /*
+ * If this bit is '1' then the Rx KTLS context type should be
+ * initialized with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_RKC \
+ UINT32_C(0x80)
+ /*
* Specifies the doubleword offset of ctx_kind_initializer for this
* context type.
*/
@@ -14277,8 +15117,32 @@ struct hwrm_func_backing_store_qcaps_output {
* this count in `backing_store_cfg`.
*/
uint8_t tqm_fp_rings_count_ext;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for Tx
+ * KTLS context type.
+ */
+ uint8_t tkc_init_offset;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for Rx
+ * KTLS context type.
+ */
+ uint8_t rkc_init_offset;
+ /* Tx KTLS context entry size in bytes. */
+ uint16_t tkc_entry_size;
+ /* Rx KTLS context entry size in bytes. */
+ uint16_t rkc_entry_size;
+ /*
+ * Maximum number of Tx KTLS context entries supported for this
+ * function.
+ */
+ uint32_t tkc_max_entries;
+ /*
+ * Maximum number of Rx KTLS context entries supported for this
+ * function.
+ */
+ uint32_t rkc_max_entries;
/* Reserved for future. */
- uint8_t rsvd[5];
+ uint8_t rsvd[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -14347,7 +15211,7 @@ struct tqm_fp_ring_cfg {
*******************************/
-/* hwrm_func_backing_store_cfg_input (size:2432b/304B) */
+/* hwrm_func_backing_store_cfg_input (size:2688b/336B) */
struct hwrm_func_backing_store_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
@@ -14507,6 +15371,18 @@ struct hwrm_func_backing_store_cfg_input {
*/
#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING10 \
UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the Tx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TKC \
+ UINT32_C(0x80000)
+ /*
+ * This bit must be '1' for the Rx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_RKC \
+ UINT32_C(0x100000)
/* QPC page size and level. */
uint8_t qpc_pg_size_qpc_lvl;
/* QPC PBL indirect levels. */
@@ -15525,6 +16401,105 @@ struct hwrm_func_backing_store_cfg_input {
uint32_t tqm_ring10_num_entries;
/* TQM ring page directory. */
uint64_t tqm_ring10_page_dir;
+ /* Number of Tx KTLS context entries allocated. */
+ uint32_t tkc_num_entries;
+ /* Number of Rx KTLS context entries allocated. */
+ uint32_t rkc_num_entries;
+ /* Tx KTLS context page directory. */
+ uint64_t tkc_page_dir;
+ /* Rx KTLS context page directory. */
+ uint64_t rkc_page_dir;
+ /* Number of bytes allocated for each Tx KTLS context entry. */
+ uint16_t tkc_entry_size;
+ /* Number of bytes allocated for each Rx KTLS context entry. */
+ uint16_t rkc_entry_size;
+ /* Tx KTLS context page size and level. */
+ uint8_t tkc_pg_size_tkc_lvl;
+ /* Tx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_2
+ /* Tx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_1G
+ /* Rx KTLS context page size and level. */
+ uint8_t rkc_pg_size_rkc_lvl;
+ /* Rx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_2
+ /* Rx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_1G
+ /* Reserved for future. */
+ uint8_t rsvd[2];
} __rte_packed;
/* hwrm_func_backing_store_cfg_output (size:128b/16B) */
@@ -15585,7 +16560,7 @@ struct hwrm_func_backing_store_qcfg_input {
uint64_t resp_addr;
} __rte_packed;
-/* hwrm_func_backing_store_qcfg_output (size:2304b/288B) */
+/* hwrm_func_backing_store_qcfg_output (size:2496b/312B) */
struct hwrm_func_backing_store_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
@@ -15725,6 +16700,18 @@ struct hwrm_func_backing_store_qcfg_output {
*/
#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING10 \
UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the Tx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TKC \
+ UINT32_C(0x80000)
+ /*
+ * This bit must be '1' for the Rx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_RKC \
+ UINT32_C(0x100000)
/* QPC page size and level. */
uint8_t qpc_pg_size_qpc_lvl;
/* QPC PBL indirect levels. */
@@ -16621,7 +17608,103 @@ struct hwrm_func_backing_store_qcfg_output {
uint32_t tqm_ring10_num_entries;
/* TQM ring page directory. */
uint64_t tqm_ring10_page_dir;
- uint8_t unused_1[7];
+ /* Number of Tx KTLS context entries. */
+ uint32_t tkc_num_entries;
+ /* Number of Rx KTLS context entries. */
+ uint32_t rkc_num_entries;
+ /* Tx KTLS context page directory. */
+ uint64_t tkc_page_dir;
+ /* Rx KTLS context page directory. */
+ uint64_t rkc_page_dir;
+ /* Tx KTLS context page size and level. */
+ uint8_t tkc_pg_size_tkc_lvl;
+ /* Tx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_2
+ /* Tx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_1G
+ /* Rx KTLS context page size and level. */
+ uint8_t rkc_pg_size_rkc_lvl;
+ /* Rx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_2
+ /* Rx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_1G
+ uint8_t unused_1[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as 1
@@ -31644,7 +32727,7 @@ struct hwrm_ring_alloc_output {
******************/
-/* hwrm_ring_free_input (size:192b/24B) */
+/* hwrm_ring_free_input (size:256b/32B) */
struct hwrm_ring_free_input {
/* The HWRM command request type. */
uint16_t req_type;
@@ -31690,10 +32773,37 @@ struct hwrm_ring_free_input {
#define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5)
#define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
HWRM_RING_FREE_INPUT_RING_TYPE_NQ
- uint8_t unused_0;
+ uint8_t flags;
+ /*
+ * If this bit is set to '1', ring_id in this command belongs to
+ * virtio function. prod_idx in this command corresponds to doorbell
+ * producer index. opaque field in this command needs to be inserted
+ * by firmware in VEE_FLUSH completion record.
+ * Firmware will poll the corresponding ring context to reach the
+ * given producer index before sending successful response. It will
+ * finish the completion using VEE_FLUSH completion record.
+ *
+ * If this bit is '0', firmware will not treat ring_id as virtio
+ * ring and ignore prod_idx, opaque fields.
+ *
+ * This feature is not applicable for L2 or RoCE.
+ */
+ #define HWRM_RING_FREE_INPUT_FLAGS_VIRTIO_RING_VALID UINT32_C(0x1)
+ #define HWRM_RING_FREE_INPUT_FLAGS_LAST \
+ HWRM_RING_FREE_INPUT_FLAGS_VIRTIO_RING_VALID
/* Physical number of ring allocated. */
uint16_t ring_id;
- uint8_t unused_1[4];
+ /*
+ * Ring BD producer index posted by the virtio block.
+ * This field is valid if virtio_ring_valid flag is set.
+ */
+ uint32_t prod_idx;
+ /*
+ * User defined opaque field to be inserted into VEE_FLUSH completion
+ * record. This field is valid if virtio_ring_valid flag is set.
+ */
+ uint32_t opaque;
+ uint32_t unused_1;
} __rte_packed;
/* hwrm_ring_free_output (size:128b/16B) */
@@ -41858,6 +42968,12 @@ struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_FILTER_TRAFFIC_TYPE_L2_ROCE_SUPPORTED \
UINT32_C(0x10000)
+ /*
+ * If set to 1, firmware is capable of HW LAG. This bit is only
+ * advertised if the calling function is a PAXC function.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_LAG_SUPPORTED \
+ UINT32_C(0x20000)
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
--
2.10.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [dpdk-dev] [PATCH 3/4] net/bnxt: minor refactoring of async handling code
2021-07-12 8:04 [dpdk-dev] [PATCH 0/4] bnxt PMD patches Kalesh A P
2021-07-12 8:04 ` [dpdk-dev] [PATCH 1/4] net/bnxt: update HSI structure Kalesh A P
2021-07-12 8:04 ` [dpdk-dev] [PATCH 2/4] net/bnxt: inform firmware about host MTU Kalesh A P
@ 2021-07-12 8:04 ` Kalesh A P
2021-07-12 8:04 ` [dpdk-dev] [PATCH 4/4] net/bnxt: add handler for pause storm event Kalesh A P
2021-07-15 0:29 ` [dpdk-dev] [PATCH 0/4] bnxt PMD patches Ajit Khaparde
4 siblings, 0 replies; 6+ messages in thread
From: Kalesh A P @ 2021-07-12 8:04 UTC (permalink / raw)
To: dev; +Cc: ajit.khaparde
From: Somnath Kotur <somnath.kotur@broadcom.com>
Store the async event completion data1 and data2 in separate variables
at the start of the function before the switch case for the different
events so they can be used by any of the event handlers.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_cpr.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_cpr.c b/drivers/net/bnxt/bnxt_cpr.c
index 2c7fd78..500146b 100644
--- a/drivers/net/bnxt/bnxt_cpr.c
+++ b/drivers/net/bnxt/bnxt_cpr.c
@@ -103,7 +103,10 @@ void bnxt_handle_async_event(struct bnxt *bp,
uint16_t port_id = bp->eth_dev->data->port_id;
struct bnxt_error_recovery_info *info;
uint32_t event_data;
- uint32_t echo_req_data1, echo_req_data2;
+ uint32_t data1, data2;
+
+ data1 = rte_le_to_cpu_32(async_cmp->event_data1);
+ data2 = rte_le_to_cpu_32(async_cmp->event_data2);
switch (event_id) {
case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE:
@@ -136,7 +139,7 @@ void bnxt_handle_async_event(struct bnxt *bp,
}
pthread_mutex_lock(&bp->err_recovery_lock);
- event_data = rte_le_to_cpu_32(async_cmp->event_data1);
+ event_data = data1;
/* timestamp_lo/hi values are in units of 100ms */
bp->fw_reset_max_msecs = async_cmp->timestamp_hi ?
rte_le_to_cpu_16(async_cmp->timestamp_hi) * 100 :
@@ -170,8 +173,7 @@ void bnxt_handle_async_event(struct bnxt *bp,
PMD_DRV_LOG(INFO, "Port %u: Error recovery async event received\n",
port_id);
- event_data = rte_le_to_cpu_32(async_cmp->event_data1) &
- EVENT_DATA1_FLAGS_MASK;
+ event_data = data1 & EVENT_DATA1_FLAGS_MASK;
if (event_data & EVENT_DATA1_FLAGS_MASTER_FUNC)
info->flags |= BNXT_FLAG_MASTER_FUNC;
@@ -198,22 +200,18 @@ void bnxt_handle_async_event(struct bnxt *bp,
bnxt_schedule_fw_health_check(bp);
break;
case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEBUG_NOTIFICATION:
- PMD_DRV_LOG(INFO, "DNC event: evt_data1 %#x evt_data2 %#x\n",
- rte_le_to_cpu_32(async_cmp->event_data1),
- rte_le_to_cpu_32(async_cmp->event_data2));
+ PMD_DRV_LOG(INFO, "Port: %u DNC event: data1 %#x data2 %#x\n",
+ port_id, data1, data2);
break;
case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFAULT_VNIC_CHANGE:
bnxt_process_default_vnic_change(bp, async_cmp);
break;
case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ECHO_REQUEST:
- echo_req_data1 = rte_le_to_cpu_32(async_cmp->event_data1);
- echo_req_data2 = rte_le_to_cpu_32(async_cmp->event_data2);
PMD_DRV_LOG(INFO,
"Port %u: Received fw echo request: data1 %#x data2 %#x\n",
- port_id, echo_req_data1, echo_req_data2);
+ port_id, data1, data2);
if (bp->recovery_info)
- bnxt_hwrm_fw_echo_reply(bp, echo_req_data1,
- echo_req_data2);
+ bnxt_hwrm_fw_echo_reply(bp, data1, data2);
break;
default:
PMD_DRV_LOG(DEBUG, "handle_async_event id = 0x%x\n", event_id);
--
2.10.1
^ permalink raw reply [flat|nested] 6+ messages in thread