* [dpdk-dev] Regarding KNI issue
@ 2014-12-02 10:17 Venkateswara Rao Dokku
0 siblings, 0 replies; only message in thread
From: Venkateswara Rao Dokku @ 2014-12-02 10:17 UTC (permalink / raw)
To: dev
HI,
Our goal is to run traffic b/w KVM guest to linux via kni_vhost. The
topology is given below
Physical port eth1 is bound to DPDK using tools/setup.sh.
We did loaded Igb_uio module, allocated hugepages etc.
*DPDK port 0*
^
|
|
---------------------------
*Physical port(eth1)* ~~~~~~ * vEth0*
|
|
|
*eth10(different machine connected back-to-back)*
We loaded KNI module and ran the KNI applicaiton with the following command
*kni -c 0xff -n 4 -- -p 0x1 -P --config="(0,4,6)"*
and we could see vEth0 added in kernel.
1. Now, How can we test traffic with the KNI interface to external world. ??
We were not able to ping between *vEth0* and *eth10*.
2. We launched a KVM guest machine, and provided *vEth0* as the tap
interface. When we initiated ping to *eth10* from the guest, we can see the
arp requests on* vEth0 (saw in tcpdump)*. But these packets are not
reaching *eth10. * If we ping from *eth10*, we dont see any packets on
*vEth0*.
Do we need to do any other configuration other than this?
Any help is much appreciated.
--
Thanks & Regards,
Venkateswara Rao Dokku
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-12-02 10:17 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-02 10:17 [dpdk-dev] Regarding KNI issue Venkateswara Rao Dokku
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).