* [dpdk-dev] How to send traffic b/w host KNI interface and external server???
@ 2014-12-05 8:37 Venkateswara Rao Dokku
0 siblings, 0 replies; only message in thread
From: Venkateswara Rao Dokku @ 2014-12-05 8:37 UTC (permalink / raw)
To: dev
Hi,
Two machines are connected back-to-back. On one machine we ran the DPDK &
bound the Ethernet port to the DPDK (back-to-back connected port).
We loaded the igb_uio and KNI modules and ran the KNI app with the
following command.
*kni -c 0xff -n 4 -- -p 0x1 -P --config="(0,4,6)"*
With this we could see the vEth0 interface via ifconfig.
Assigned Ip address to the vEth0 interface & tried to ping the vEth0
interface from the machine 2 in back-to-back connection.
We couldn't ping.
What we have to do apart from the above steps to send traffic b/w Kni
interface & the external connected machine?
Thanks
--
Thanks & Regards,
Venkateswara Rao Dokku.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-12-05 8:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-05 8:37 [dpdk-dev] How to send traffic b/w host KNI interface and external server??? Venkateswara Rao Dokku
DPDK patches and discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
dev@dpdk.org
public-inbox-index dev
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://inbox.dpdk.org/inbox.dpdk.dev
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git