DPDK patches and discussions
 help / color / mirror / Atom feed
From: BYEONG-GI KIM <kimbyeonggi@gmail.com>
To: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz@intel.com>,
	arodriguez@callistech.com, dev@dpdk.org
Subject: Re: [dpdk-dev] [Dpdk-ovs] Questions about the OpenStack Neutron with Intel Architecture document
Date: Tue, 5 Aug 2014 21:10:07 +0900	[thread overview]
Message-ID: <CAEHt_JaAnJ6zu5trSodH=0wKehY1WsJYFgUM-mHaFhD4ncs3kg@mail.gmail.com> (raw)
In-Reply-To: <FD920D91FA434C4988D04BF2D4011259150A2029@IRSMSX102.ger.corp.intel.com>

The command shows "nodev on /mnt/huge type hugetlbfs (rw)", so I think it
has been mounted correctly.

By the way, I could execute HelloWorld example file by setting all the
things through ./tools/setup.sh

I'm still not sure which part was not set correctly though.

Thanks anyway.

Best regards

Byeong-Gi KIM


2014-08-05 20:48 GMT+09:00 Czesnowicz, Przemyslaw <
przemyslaw.czesnowicz@intel.com>:

>  Hi,
>
>
>
> From the error msg looks like You didn’t mount the hugetlbfs.
>
> To confirm do:
>
> mount | grep huge
>
> if there is no output mount hugetlbfs with:
>
> sudo mount -t hugetlbfs  nodev /mnt/huge
>
>
>
> Regards
>
> Przemek
>
> *From:* BYEONG-GI KIM [mailto:kimbyeonggi@gmail.com]
> *Sent:* Tuesday, August 05, 2014 12:28 PM
> *To:* Czesnowicz, Przemyslaw; dev@dpdk.org
> *Subject:* Re: [Dpdk-ovs] Questions about the OpenStack Neutron with
> Intel Architecture document
>
>
>
> Thank you for the reply.
>
>
>
> I installed DPDK 1.7.0 on RedHat 6.5 with Kernel 3.7.10 and it seems
> compiled successfully.
>
>
>
> When execute the HelloWorld example, however, there was a panic error as
> below:
>
> 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found
> for that size
>
> PANIC in rte_eal_init():
>
> Cannot get hugepage information
>
>
>
> The PC has Intel ATOM Processor and I binded a NIC to igb_uio module. I
> think the hugepage reservation is also correctly done since I put "echo
> 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages"
>
>
>
> What should I check to solve this problem?
>
>
>
> Thanks in advance.
>
>
>
> Best regards
>
>
>
> Byeong-Gi KIM
>
>
>
>
>
> 2014-08-05 18:19 GMT+09:00 Czesnowicz, Przemyslaw <
> przemyslaw.czesnowicz@intel.com>:
>
> Hi BYEONG-GI KIM
>
> 1.      This is only needed if you are working from a machine behind a
> proxy.
>
> 2.      By Accelerated OVS we mean ovs from openvswitch.org compiled and
> running  with dpdk support.
>
> You don’t have to deploy the “Accelerated OVS” compute node.
>
> 3.      We didn’t try running it on RH 6.5, let us know if you have any
> issues.
>
>
>
> Regards
>
> Przemek
>
>
>
> *From:* Dpdk-ovs [mailto:dpdk-ovs-bounces@lists.01.org] *On Behalf Of *BYEONG-GI
> KIM
> *Sent:* Monday, August 04, 2014 8:00 AM
> *To:* Dpdk-ovs@lists.01.org
> *Subject:* [Dpdk-ovs] Questions about the OpenStack Neutron with Intel
> Architecture document
>
>
>
> Hello.
>
>
>
> I've noticed that the new version of both DPDK and corrresponding OVDK
> finally has been released and the document for OpenStack Neutron with those
> technologies also has been updated.
>
>
>
> The latest guide seems changed from the past guide. Here are several
> questions about those changes.
>
>
>
> 1. The guide includes "Configuring Proxies", but I'm not sure this is
> essential part. If it is essential, which <PROXY> and <PROXYPORT> should be
> set? And the <YOUR HOST IP ADDRESS> is also confused. Does it mean I need
> to deploy another proxy PC in addition to both Compute Node and Controller
> Node for OpenStack?
>
>
>
> 2. Another Sample Compute local.conf is added at 6.1.1.3, but I wonder the
> difference between past one and the new one. It is described as OpenStack
> Accelerated OVS Compute Node. Does it mean the new one accelerates packet
> processing but the past one does not?
>
>
>
> 3. Finally, I assume that the deployment would be fit at kernel 3.1.4
> version of Fedora (actually we are trying to install it on RedHat 6.5)
> since the Fedora 20 is recommended. Is it right?
>
>
>
> Best regards
>
>
>
> Byeong-Gi KIM
>
>
>
> --------------------------------------------------------------
> Intel Shannon Limited
> Registered in Ireland
> Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
> Registered Number: 308263
> Business address: Dromore House, East Park, Shannon, Co. Clare
>
> This e-mail and any attachments may contain confidential material for the
> sole use of the intended recipient(s). Any review or distribution by others
> is strictly prohibited. If you are not the intended recipient, please
> contact the sender and delete all copies.
>
>
>
> --------------------------------------------------------------
> Intel Shannon Limited
> Registered in Ireland
> Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
> Registered Number: 308263
> Business address: Dromore House, East Park, Shannon, Co. Clare
>
> This e-mail and any attachments may contain confidential material for the
> sole use of the intended recipient(s). Any review or distribution by others
> is strictly prohibited. If you are not the intended recipient, please
> contact the sender and delete all copies.
>
>

      parent reply	other threads:[~2014-08-05 12:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CAEHt_JZyAV3T9xyHkojtuFMwi5zShCGyWTS2d6CTfR40YHZSKA@mail.gmail.com>
     [not found] ` <FD920D91FA434C4988D04BF2D4011259150A1EF9@IRSMSX102.ger.corp.intel.com>
2014-08-05 11:28   ` BYEONG-GI KIM
     [not found]     ` <FD920D91FA434C4988D04BF2D4011259150A2029@IRSMSX102.ger.corp.intel.com>
2014-08-05 12:10       ` BYEONG-GI KIM [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAEHt_JaAnJ6zu5trSodH=0wKehY1WsJYFgUM-mHaFhD4ncs3kg@mail.gmail.com' \
    --to=kimbyeonggi@gmail.com \
    --cc=arodriguez@callistech.com \
    --cc=dev@dpdk.org \
    --cc=przemyslaw.czesnowicz@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).