Re: [dpdk-dev] Error while compiling DPDK

[BYEONG-GI KIM <kimbyeonggi@gmail.com>]

Dear choi,

Thank you for the reply.

I've been trying to install DPDK while changing the command as you
mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was still
shown;


[root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc
================== Installing x86_64-default-linuxapp-gcc
Configuration done
== Build scripts
== Build scripts/testhost
  HOSTCC testhost.o
  HOSTLD testhost
  INSTALL-HOSTAPP testhost
== Build lib
== Build lib/librte_eal
== Build lib/librte_eal/common
  SYMLINK-FILE include/rte_atomic.h
  SYMLINK-FILE include/rte_branch_prediction.h
  SYMLINK-FILE include/rte_byteorder.h
  SYMLINK-FILE include/rte_common.h
  SYMLINK-FILE include/rte_cycles.h
  SYMLINK-FILE include/rte_debug.h
  SYMLINK-FILE include/rte_eal.h
  SYMLINK-FILE include/rte_errno.h
  SYMLINK-FILE include/rte_launch.h
  SYMLINK-FILE include/rte_lcore.h
  SYMLINK-FILE include/rte_log.h
  SYMLINK-FILE include/rte_memcpy.h
  SYMLINK-FILE include/rte_memory.h
  SYMLINK-FILE include/rte_memzone.h
  SYMLINK-FILE include/rte_pci.h
  SYMLINK-FILE include/rte_pci_dev_ids.h
  SYMLINK-FILE include/rte_per_lcore.h
  SYMLINK-FILE include/rte_prefetch.h
  SYMLINK-FILE include/rte_random.h
  SYMLINK-FILE include/rte_rwlock.h
  SYMLINK-FILE include/rte_spinlock.h
  SYMLINK-FILE include/rte_tailq.h
  SYMLINK-FILE include/rte_interrupts.h
  SYMLINK-FILE include/rte_alarm.h
  SYMLINK-FILE include/rte_string_fns.h
  SYMLINK-FILE include/rte_cpuflags.h
  SYMLINK-FILE include/rte_version.h
  SYMLINK-FILE include/rte_tailq_elem.h
  SYMLINK-FILE include/rte_eal_memconfig.h
  SYMLINK-FILE include/rte_malloc_heap.h
  SYMLINK-FILE include/rte_hexdump.h
  SYMLINK-FILE include/arch/rte_atomic.h
== Build lib/librte_eal/linuxapp
== Build lib/librte_eal/linuxapp/igb_uio
  LD
 /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o
  CC [M]
 /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC
 /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o
  LD [M]
 /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
== Build lib/librte_eal/linuxapp/eal
  CC eal.o
gcc: error: –g: 그런 파일이나 디렉터리가 없습니다
make[7]: *** [eal.o] 오류 1
make[6]: *** [eal] 오류 2
make[5]: *** [linuxapp] 오류 2
make[4]: *** [librte_eal] 오류 2
make[3]: *** [lib] 오류 2
make[2]: *** [all] 오류 2
make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2
make: *** [install] 오류 2

I'm sorry for the Korean characteristics. It was shown because My Fedora OS
is set to use Korean as a default language.

I set two environmental variables following the
intel-dpdk-programmers-guide.pdf as below:

export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0
export RTE_TARGET=x86_64-native-linuxapp-gcc

What should I do in order to install DPDK successfully?...

Thanks in advance.

Best regards

Byeong-Gi KIM




2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi@intel.com>:

>  Hi Mr. Kim,
>
> Please do not compile with "T=x86*gcc" because it will compile BSD app
> too, which cause the error.
>
> Please complile only the configuration you need. This should remove the
> error.
>
>
> Regards,
> Choi, Sy Jong
>
>
> -----Original Message-----
> *From: *BYEONG-GI KIM [kimbyeonggi@gmail.com]
> *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time
> *To: *Dpdk-ovs@lists.01.org; dev@dpdk.org
> *Subject: *[dpdk-dev] Error while compiling DPDK
>
> Hello.
>
> An error occured while compiling DPDK 1.6.0r2 as below:
>
> [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc
> ...Installing...
> /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function
> ‘rte_eal_init’:
> /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error:
> format ‘%p’ expects argument of type ‘void *’, but argument 5 has type
> ‘pthread_t’ [-Werror=format=]
>   RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n",
>   ^
>
> The current OS is Fedora20. What should I do?...
>
> Best regards
>
> Byeong-Gi KIM
>