From: BYEONG-GI KIM <kimbyeonggi@gmail.com>
To: "Choi, Sy Jong" <sy.jong.choi@intel.com>,
dev@dpdk.org, Dpdk-ovs@lists.01.org
Subject: Re: [dpdk-dev] Error while compiling DPDK
Date: Mon, 14 Jul 2014 12:28:41 +0900 [thread overview]
Message-ID: <CAEHt_JbGRk3PahkkoYtBLNdpN+GUrJUp=85HQOLze=jFg5kMPw@mail.gmail.com> (raw)
In-Reply-To: <697F8B1B48670548A5BAB03E8283550F2D300085@PGSMSX107.gar.corp.intel.com>
Dear Choi
I used x86_64-default-linuxapp-gcc.
I also checked x86_64-native-linuxapp-gcc after exporting
RTE_TARGET=x86_64-native-linuxapp-gcc, but there was a message "make[1]:
Nothing to be done for `install'." while trying to install it.
Best regards
Byeong-Gi KIM
2014-07-14 11:40 GMT+09:00 Choi, Sy Jong <sy.jong.choi@intel.com>:
> Hi Mr. Kim,
>
> May confirm which environment are you using?
> x86_64-default-linuxapp-gcc or
> x86_64-native-linuxapp-gcc
>
>
>
>
> Regards,
> Choi, Sy Jong
>
> -----Original Message-----
> *From: *BYEONG-GI KIM [kimbyeonggi@gmail.com]
> *Sent: *Monday, July 14, 2014 10:05 AM Malay Peninsula Standard Time
> *To: *Masaru Oki; dev@dpdk.org; Dpdk-ovs@lists.01.org
> *Subject: *Re: [dpdk-dev] Error while compiling DPDK
>
> Here is the error message in English;
>
> == Build lib/librte_eal/linuxapp
> == Build lib/librte_eal/linuxapp/igb_uio
> LD
>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o
> CC [M]
>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
> Building modules, stage 2.
> MODPOST 1 modules
> CC
>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o
> LD [M]
>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko
> INSTALL-MODULE igb_uio.ko
> == Build lib/librte_eal/linuxapp/eal
> CC eal.o
> gcc: error: –g: No such file or directory
> make[7]: *** [eal.o] Error 1
> make[6]: *** [eal] Error 2
> make[5]: *** [linuxapp] Error 2
> make[4]: *** [librte_eal] Error 2
> make[3]: *** [lib] Error 2
> make[2]: *** [all] Error 2
> make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2
> make: *** [install] Error 2
>
>
>
> 2014-07-14 11:02 GMT+09:00 Masaru Oki <m-oki@stratosphere.co.jp>:
>
> > > I'm sorry for the Korean characteristics. It was shown because My
> Fedora
> > OS
> > > is set to use Korean as a default language.
> >
> > Try env LANG=C make install ...
> >
> >
> > 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi@gmail.com>:
> >
> >> Dear choi,
> >>
> >> Thank you for the reply.
> >>
> >> I've been trying to install DPDK while changing the command as you
> >> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was
> still
> >> shown;
> >>
> >>
> >> [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc
> >> ================== Installing x86_64-default-linuxapp-gcc
> >> Configuration done
> >> == Build scripts
> >> == Build scripts/testhost
> >> HOSTCC testhost.o
> >> HOSTLD testhost
> >> INSTALL-HOSTAPP testhost
> >> == Build lib
> >> == Build lib/librte_eal
> >> == Build lib/librte_eal/common
> >> SYMLINK-FILE include/rte_atomic.h
> >> SYMLINK-FILE include/rte_branch_prediction.h
> >> SYMLINK-FILE include/rte_byteorder.h
> >> SYMLINK-FILE include/rte_common.h
> >> SYMLINK-FILE include/rte_cycles.h
> >> SYMLINK-FILE include/rte_debug.h
> >> SYMLINK-FILE include/rte_eal.h
> >> SYMLINK-FILE include/rte_errno.h
> >> SYMLINK-FILE include/rte_launch.h
> >> SYMLINK-FILE include/rte_lcore.h
> >> SYMLINK-FILE include/rte_log.h
> >> SYMLINK-FILE include/rte_memcpy.h
> >> SYMLINK-FILE include/rte_memory.h
> >> SYMLINK-FILE include/rte_memzone.h
> >> SYMLINK-FILE include/rte_pci.h
> >> SYMLINK-FILE include/rte_pci_dev_ids.h
> >> SYMLINK-FILE include/rte_per_lcore.h
> >> SYMLINK-FILE include/rte_prefetch.h
> >> SYMLINK-FILE include/rte_random.h
> >> SYMLINK-FILE include/rte_rwlock.h
> >> SYMLINK-FILE include/rte_spinlock.h
> >> SYMLINK-FILE include/rte_tailq.h
> >> SYMLINK-FILE include/rte_interrupts.h
> >> SYMLINK-FILE include/rte_alarm.h
> >> SYMLINK-FILE include/rte_string_fns.h
> >> SYMLINK-FILE include/rte_cpuflags.h
> >> SYMLINK-FILE include/rte_version.h
> >> SYMLINK-FILE include/rte_tailq_elem.h
> >> SYMLINK-FILE include/rte_eal_memconfig.h
> >> SYMLINK-FILE include/rte_malloc_heap.h
> >> SYMLINK-FILE include/rte_hexdump.h
> >> SYMLINK-FILE include/arch/rte_atomic.h
> >> == Build lib/librte_eal/linuxapp
> >> == Build lib/librte_eal/linuxapp/igb_uio
> >> LD
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o
> >> CC [M]
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
> >> Building modules, stage 2.
> >> MODPOST 1 modules
> >> CC
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o
> >> LD [M]
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko
> >> INSTALL-MODULE igb_uio.ko
> >> == Build lib/librte_eal/linuxapp/eal
> >> CC eal.o
> >> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다
> >> make[7]: *** [eal.o] 오류 1
> >> make[6]: *** [eal] 오류 2
> >> make[5]: *** [linuxapp] 오류 2
> >> make[4]: *** [librte_eal] 오류 2
> >> make[3]: *** [lib] 오류 2
> >> make[2]: *** [all] 오류 2
> >> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2
> >> make: *** [install] 오류 2
> >>
> >> I'm sorry for the Korean characteristics. It was shown because My Fedora
> >> OS
> >> is set to use Korean as a default language.
> >>
> >> I set two environmental variables following the
> >> intel-dpdk-programmers-guide.pdf as below:
> >>
> >> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0
> >> export RTE_TARGET=x86_64-native-linuxapp-gcc
> >>
> >> What should I do in order to install DPDK successfully?...
> >>
> >> Thanks in advance.
> >>
> >> Best regards
> >>
> >> Byeong-Gi KIM
> >>
> >>
> >>
> >>
> >> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi@intel.com>:
> >>
> >> > Hi Mr. Kim,
> >> >
> >> > Please do not compile with "T=x86*gcc" because it will compile BSD app
> >> > too, which cause the error.
> >> >
> >> > Please complile only the configuration you need. This should remove
> the
> >> > error.
> >> >
> >> >
> >> > Regards,
> >> > Choi, Sy Jong
> >> >
> >> >
> >> > -----Original Message-----
> >> > *From: *BYEONG-GI KIM [kimbyeonggi@gmail.com]
> >> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time
> >> > *To: *Dpdk-ovs@lists.01.org; dev@dpdk.org
> >> > *Subject: *[dpdk-dev] Error while compiling DPDK
> >>
> >> >
> >> > Hello.
> >> >
> >> > An error occured while compiling DPDK 1.6.0r2 as below:
> >> >
> >> > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc
> >> > ...Installing...
> >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function
> >> > ‘rte_eal_init’:
> >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error:
> >> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type
> >> > ‘pthread_t’ [-Werror=format=]
> >> > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n",
> >> > ^
> >> >
> >> > The current OS is Fedora20. What should I do?...
> >> >
> >> > Best regards
> >> >
> >> > Byeong-Gi KIM
> >> >
> >>
> >
> >
>
next prev parent reply other threads:[~2014-07-14 3:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-14 0:24 BYEONG-GI KIM
2014-07-14 1:00 ` Choi, Sy Jong
2014-07-14 1:24 ` BYEONG-GI KIM
2014-07-14 2:02 ` Masaru Oki
2014-07-14 2:04 ` BYEONG-GI KIM
2014-07-14 2:40 ` Choi, Sy Jong
2014-07-14 3:28 ` BYEONG-GI KIM [this message]
2014-07-14 4:32 ` Choi, Sy Jong
2014-07-14 4:43 ` BYEONG-GI KIM
2014-07-14 8:27 ` De Lara Guarch, Pablo
2014-07-14 11:46 ` Neil Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAEHt_JbGRk3PahkkoYtBLNdpN+GUrJUp=85HQOLze=jFg5kMPw@mail.gmail.com' \
--to=kimbyeonggi@gmail.com \
--cc=Dpdk-ovs@lists.01.org \
--cc=dev@dpdk.org \
--cc=sy.jong.choi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).