[dpdk-dev] Unable to start DPDK+Netshard

[dpdk-dev] Unable to start DPDK+Netshard

[jayachandran.subramanian]

[-- Attachment #1: Type: text/plain, Size: 1153 bytes --]

Hi ,

When I start netshard with dpdk-pmd stack , getting the below error

RING: Cannot reserve memory
Failed to create mempool for Tx
RING: Cannot reserve memory
Failed to create mempool for Tx
Creating Rx mbuf pool 'dpdk_net_pktmbuf_pool8_rx' [1024 mbufs] ...
RING: Cannot reserve memory
Failed to create mempool for Tx

Configured huge pages and binded NIC to DPDK drivers

Please let me know how to resolve this issue, PFA nic binding / huge pages details.

Thanks
Jay
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

[-- Attachment #2: loadtest_issue.txt --]
[-- Type: text/plain, Size: 1067 bytes --]




root@dev-app01 tools]# ./dpdk_nic_bind.py --status

Network devices using DPDK-compatible driver
============================================
0000:02:00.0 'Ethernet Controller 10-Gigabit X540-AT2' drv=igb_uio unused=ixgbe
0000:02:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=igb_uio unused=ixgbe
0000:05:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=igb_uio unused=ixgbe

Network devices using kernel driver
===================================
0000:05:00.0 'Ethernet Controller 10-Gigabit X540-AT2' if=enp5s0f0 drv=ixgbe unused=igb_uio *Active*
0000:09:00.0 'I350 Gigabit Network Connection' if=enp9s0f0 drv=igb unused=igb_uio
0000:09:00.1 'I350 Gigabit Network Connection' if=enp9s0f1 drv=igb unused=igb_uio

Other network devices
=====================
<none>
[root@dev-app01 tools]#


[root@dev-app01 tools]# grep -i huge /proc/meminfo
AnonHugePages:     10240 kB
HugePages_Total:     512
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
[root@dev-app01 tools]#

Re: [dpdk-dev] Unable to start DPDK+Netshard

[harshavardhan Reddy]

try o increase the hugepages to
4GB and run once again.
Also it depends on how much memory u are reserving in mempools and for
rings..

Regards,
HVR

On Sun, Aug 21, 2016 at 4:08 PM, <jayachandran.subramanian@wipro.com> wrote:

> Hi ,
>
> When I start netshard with dpdk-pmd stack , getting the below error
>
> RING: Cannot reserve memory
> Failed to create mempool for Tx
> RING: Cannot reserve memory
> Failed to create mempool for Tx
> Creating Rx mbuf pool 'dpdk_net_pktmbuf_pool8_rx' [1024 mbufs] ...
> RING: Cannot reserve memory
> Failed to create mempool for Tx
>
> Configured huge pages and binded NIC to DPDK drivers
>
> Please let me know how to resolve this issue, PFA nic binding / huge pages
> details.
>
> Thanks
> Jay
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s) and
> may contain proprietary, confidential or privileged information. If you are
> not the intended recipient, you should not disseminate, distribute or copy
> this e-mail. Please notify the sender immediately and destroy all copies of
> this message and any attachments. WARNING: Computer viruses can be
> transmitted via email. The recipient should check this email and any
> attachments for the presence of viruses. The company accepts no liability
> for any damage caused by any virus transmitted by this email.
> www.wipro.com
>

Re: [dpdk-dev] Unable to start DPDK+Netshard

[jayachandran.subramanian]

HI HVR,

Thanks a lot after increasing Huge pages to 1536 Mb , issue got resolved.

Also could you please let me know , we needs to configure the same Huge page/isolscpus  in grub configuration .

Could you please help me on that !

Thanks
Jay

From: harshavardhan Reddy [mailto:hvreddy1110@gmail.com]
Sent: Monday, August 22, 2016 11:14 AM
To: Jayachandran Subramanian (MFG & Tech) <jayachandran.subramanian@wipro.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] Unable to start DPDK+Netshard


** This mail has been sent from an external source **
try o increase the hugepages to
4GB and run once again.
Also it depends on how much memory u are reserving in mempools and for rings..

Regards,
HVR

On Sun, Aug 21, 2016 at 4:08 PM, <jayachandran.subramanian@wipro.com<mailto:jayachandran.subramanian@wipro.com>> wrote:
Hi ,

When I start netshard with dpdk-pmd stack , getting the below error

RING: Cannot reserve memory
Failed to create mempool for Tx
RING: Cannot reserve memory
Failed to create mempool for Tx
Creating Rx mbuf pool 'dpdk_net_pktmbuf_pool8_rx' [1024 mbufs] ...
RING: Cannot reserve memory
Failed to create mempool for Tx

Configured huge pages and binded NIC to DPDK drivers

Please let me know how to resolve this issue, PFA nic binding / huge pages details.

Thanks
Jay
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com<http://www.wipro.com>

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

Re: [dpdk-dev] Unable to start DPDK+Netshard

[harshavardhan Reddy]

Edit the /etc/default/grub file, and add the following to the
GRUB_CMDLINE_LINUX entry:
GRUB_CMDLINE_LINUX="hugepagesz=1G hugepages=<Number of hugepages required>
default_hugepagesz=1G"
There only you can mention cpu isolation also.

After modifying run

grub2-mkconfig -o /boot/grub2/grub.cfg

reboot system

Regards,
Harsha

On Mon, Aug 22, 2016 at 11:20 AM, <jayachandran.subramanian@wipro.com>
wrote:

> HI HVR,
>
>
>
> Thanks a lot after increasing Huge pages to 1536 Mb , issue got resolved.
>
>
>
> Also could you please let me know , we needs to configure the same Huge
> page/isolscpus  in grub configuration .
>
>
>
> Could you please help me on that !
>
>
>
> Thanks
>
> Jay
>
>
>
> *From:* harshavardhan Reddy [mailto:hvreddy1110@gmail.com]
> *Sent:* Monday, August 22, 2016 11:14 AM
> *To:* Jayachandran Subramanian (MFG & Tech) <jayachandran.subramanian@
> wipro.com>
> *Cc:* dev@dpdk.org
> *Subject:* Re: [dpdk-dev] Unable to start DPDK+Netshard
>
>
>
> ** This mail has been sent from an external source **
>
> try o increase the hugepages to
>
> 4GB and run once again.
>
> Also it depends on how much memory u are reserving in mempools and for
> rings..
>
>
>
> Regards,
>
> HVR
>
>
>
> On Sun, Aug 21, 2016 at 4:08 PM, <jayachandran.subramanian@wipro.com>
> wrote:
>
> Hi ,
>
> When I start netshard with dpdk-pmd stack , getting the below error
>
> RING: Cannot reserve memory
> Failed to create mempool for Tx
> RING: Cannot reserve memory
> Failed to create mempool for Tx
> Creating Rx mbuf pool 'dpdk_net_pktmbuf_pool8_rx' [1024 mbufs] ...
> RING: Cannot reserve memory
> Failed to create mempool for Tx
>
> Configured huge pages and binded NIC to DPDK drivers
>
> Please let me know how to resolve this issue, PFA nic binding / huge pages
> details.
>
> Thanks
> Jay
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s) and
> may contain proprietary, confidential or privileged information. If you are
> not the intended recipient, you should not disseminate, distribute or copy
> this e-mail. Please notify the sender immediately and destroy all copies of
> this message and any attachments. WARNING: Computer viruses can be
> transmitted via email. The recipient should check this email and any
> attachments for the presence of viruses. The company accepts no liability
> for any damage caused by any virus transmitted by this email.
> www.wipro.com
>
>
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s) and
> may contain proprietary, confidential or privileged information. If you are
> not the intended recipient, you should not disseminate, distribute or copy
> this e-mail. Please notify the sender immediately and destroy all copies of
> this message and any attachments. WARNING: Computer viruses can be
> transmitted via email. The recipient should check this email and any
> attachments for the presence of viruses. The company accepts no liability
> for any damage caused by any virus transmitted by this email.
> www.wipro.com
>