DPDK patches and discussions
 help / color / mirror / Atom feed
From: Marc <marcdevel@gmail.com>
To: Alejandro Lucero <alejandro.lucero@netronome.com>
Cc: Thomas Monjalon <thomas.monjalon@6wind.com>,
	"Xu, Qian Q" <qian.q.xu@intel.com>,
	 "Xing, Beilei" <beilei.xing@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	 "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	"Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
	 "Richardson, Bruce" <bruce.richardson@intel.com>,
	"Glynn, Michael J" <michael.j.glynn@intel.com>
Subject: Re: [dpdk-dev] [PATCH v13 5/8] ethdev: add speed capabilities
Date: Wed, 30 Mar 2016 10:06:28 +0200	[thread overview]
Message-ID: <CAExC=0T2gNLUhgOkg3cn-kB=8z2vOiZgmXwe=Mj4=3mWdtRz-g@mail.gmail.com> (raw)
In-Reply-To: <CAD+H991Vx4TL_raiduBR-Z-e8BTv+Xu8-_o5HbgJvQqCBZ0oOg@mail.gmail.com>

On 29 March 2016 at 15:31, Alejandro Lucero <alejandro.lucero@netronome.com>
wrote:

> For nfp.c, speed_capa should be ETH_LINK_SPEED_40G instead of ETH_LINK_SPEED_50G.
> By the way, the change in patch 4 sets the right link speed using the new
> constants.
>
> Regards
>

Noted for v14, thanks

Marc


>
> On Sat, Mar 26, 2016 at 1:27 AM, Marc Sune <marcdevel@gmail.com> wrote:
>
>> The speed capabilities of a device can be retrieved with
>> rte_eth_dev_info_get().
>>
>> The new field speed_capa is initialized in the drivers without
>> taking care of device characteristics in this patch.
>> When the capabilities of a driver are accurate, the table in
>> overview.rst must be filled.
>>
>> Signed-off-by: Marc Sune <marcdevel@gmail.com>
>> ---
>>  doc/guides/nics/overview.rst           |  1 +
>>  doc/guides/rel_notes/release_16_04.rst |  8 ++++++++
>>  drivers/net/bnx2x/bnx2x_ethdev.c       |  1 +
>>  drivers/net/cxgbe/cxgbe_ethdev.c       |  1 +
>>  drivers/net/e1000/em_ethdev.c          |  4 ++++
>>  drivers/net/e1000/igb_ethdev.c         |  4 ++++
>>  drivers/net/ena/ena_ethdev.c           |  9 +++++++++
>>  drivers/net/fm10k/fm10k_ethdev.c       |  4 ++++
>>  drivers/net/i40e/i40e_ethdev.c         |  8 ++++++++
>>  drivers/net/ixgbe/ixgbe_ethdev.c       |  8 ++++++++
>>  drivers/net/mlx4/mlx4.c                |  6 ++++++
>>  drivers/net/mlx5/mlx5_ethdev.c         |  8 ++++++++
>>  drivers/net/nfp/nfp_net.c              |  2 ++
>>  lib/librte_ether/rte_ethdev.h          | 21 +++++++++++++++++++++
>>  14 files changed, 85 insertions(+)
>>
>> diff --git a/doc/guides/nics/overview.rst b/doc/guides/nics/overview.rst
>> index 542479a..62f1868 100644
>> --- a/doc/guides/nics/overview.rst
>> +++ b/doc/guides/nics/overview.rst
>> @@ -86,6 +86,7 @@ Most of these differences are summarized below.
>>                                            e   e       e   e   e
>>            e
>>                                            c   c       c   c   c
>>            c
>>     ==================== = = = = = = = = = = = = = = = = = = = = = = = =
>> = = = = = = = = =
>> +   speed capabilities
>>     link status                  X       X X
>>      X X
>>     link status event                    X X
>>        X
>>     queue status event
>>        X
>> diff --git a/doc/guides/rel_notes/release_16_04.rst
>> b/doc/guides/rel_notes/release_16_04.rst
>> index 79d76e1..9e7b0b7 100644
>> --- a/doc/guides/rel_notes/release_16_04.rst
>> +++ b/doc/guides/rel_notes/release_16_04.rst
>> @@ -47,6 +47,11 @@ This section should contain new features added in this
>> release. Sample format:
>>    A new function ``rte_pktmbuf_alloc_bulk()`` has been added to allow
>> the user
>>    to allocate a bulk of mbufs.
>>
>> +* **Added device link speed capabilities.**
>> +
>> +  The structure ``rte_eth_dev_info`` has now a ``speed_capa`` bitmap,
>> which
>> +  allows the application to know the supported speeds of each device.
>> +
>>  * **Added new poll-mode driver for Amazon Elastic Network Adapters
>> (ENA).**
>>
>>    The driver operates variety of ENA adapters through feature negotiation
>> @@ -456,6 +461,9 @@ This section should contain API changes. Sample
>> format:
>>    All drivers are now counting the missed packets only once, i.e.
>> drivers will
>>    not increment ierrors anymore for missed packets.
>>
>> +* The ethdev structure ``rte_eth_dev_info`` was changed to support device
>> +  speed capabilities.
>> +
>>  * The functions ``rte_eth_dev_udp_tunnel_add`` and
>> ``rte_eth_dev_udp_tunnel_delete``
>>    have been renamed into ``rte_eth_dev_udp_tunnel_port_add`` and
>>    ``rte_eth_dev_udp_tunnel_port_delete``.
>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
>> b/drivers/net/bnx2x/bnx2x_ethdev.c
>> index a3c6c01..897081f 100644
>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>> @@ -327,6 +327,7 @@ bnx2x_dev_infos_get(struct rte_eth_dev *dev,
>> __rte_unused struct rte_eth_dev_inf
>>         dev_info->min_rx_bufsize = BNX2X_MIN_RX_BUF_SIZE;
>>         dev_info->max_rx_pktlen  = BNX2X_MAX_RX_PKT_LEN;
>>         dev_info->max_mac_addrs  = BNX2X_MAX_MAC_ADDRS;
>> +       dev_info->speed_capa = ETH_LINK_SPEED_10G | ETH_LINK_SPEED_20G;
>>  }
>>
>>  static void
>> diff --git a/drivers/net/cxgbe/cxgbe_ethdev.c
>> b/drivers/net/cxgbe/cxgbe_ethdev.c
>> index 8845c76..bb134e5 100644
>> --- a/drivers/net/cxgbe/cxgbe_ethdev.c
>> +++ b/drivers/net/cxgbe/cxgbe_ethdev.c
>> @@ -171,6 +171,7 @@ static void cxgbe_dev_info_get(struct rte_eth_dev
>> *eth_dev,
>>
>>         device_info->rx_desc_lim = cxgbe_desc_lim;
>>         device_info->tx_desc_lim = cxgbe_desc_lim;
>> +       device_info->speed_capa = ETH_LINK_SPEED_10G | ETH_LINK_SPEED_40G;
>>  }
>>
>>  static void cxgbe_dev_promiscuous_enable(struct rte_eth_dev *eth_dev)
>> diff --git a/drivers/net/e1000/em_ethdev.c b/drivers/net/e1000/em_ethdev.c
>> index 473d77f..d5f8c7f 100644
>> --- a/drivers/net/e1000/em_ethdev.c
>> +++ b/drivers/net/e1000/em_ethdev.c
>> @@ -1054,6 +1054,10 @@ eth_em_infos_get(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *dev_info)
>>                 .nb_min = E1000_MIN_RING_DESC,
>>                 .nb_align = EM_TXD_ALIGN,
>>         };
>> +
>> +       dev_info->speed_capa = ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M
>> |
>> +                       ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
>> +                       ETH_LINK_SPEED_1G;
>>  }
>>
>>  /* return 0 means link status changed, -1 means not changed */
>> diff --git a/drivers/net/e1000/igb_ethdev.c
>> b/drivers/net/e1000/igb_ethdev.c
>> index 86f25f6..95d1711 100644
>> --- a/drivers/net/e1000/igb_ethdev.c
>> +++ b/drivers/net/e1000/igb_ethdev.c
>> @@ -1921,6 +1921,10 @@ eth_igb_infos_get(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *dev_info)
>>
>>         dev_info->rx_desc_lim = rx_desc_lim;
>>         dev_info->tx_desc_lim = tx_desc_lim;
>> +
>> +       dev_info->speed_capa = ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M
>> |
>> +                       ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
>> +                       ETH_LINK_SPEED_1G;
>>  }
>>
>>  static const uint32_t *
>> diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
>> index 1046286..4e403af 100644
>> --- a/drivers/net/ena/ena_ethdev.c
>> +++ b/drivers/net/ena/ena_ethdev.c
>> @@ -1170,6 +1170,15 @@ static void ena_infos_get(struct rte_eth_dev *dev,
>>         ena_dev = &adapter->ena_dev;
>>         ena_assert_msg(ena_dev != NULL, "Uninitialized device");
>>
>> +       dev_info->speed_capa =
>> +                       ETH_LINK_SPEED_1G   |
>> +                       ETH_LINK_SPEED_2_5G |
>> +                       ETH_LINK_SPEED_5G   |
>> +                       ETH_LINK_SPEED_10G  |
>> +                       ETH_LINK_SPEED_25G  |
>> +                       ETH_LINK_SPEED_40G  |
>> +                       ETH_LINK_SPEED_50G;
>> +
>>         /* Get supported features from HW */
>>         rc = ena_com_get_dev_attr_feat(ena_dev, &feat);
>>         if (unlikely(rc)) {
>> diff --git a/drivers/net/fm10k/fm10k_ethdev.c
>> b/drivers/net/fm10k/fm10k_ethdev.c
>> index 53aa1bb..85ad0df 100644
>> --- a/drivers/net/fm10k/fm10k_ethdev.c
>> +++ b/drivers/net/fm10k/fm10k_ethdev.c
>> @@ -1410,6 +1410,10 @@ fm10k_dev_infos_get(struct rte_eth_dev *dev,
>>                 .nb_min = FM10K_MIN_TX_DESC,
>>                 .nb_align = FM10K_MULT_TX_DESC,
>>         };
>> +
>> +       dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_2_5G |
>> +                       ETH_LINK_SPEED_10G | ETH_LINK_SPEED_25G |
>> +                       ETH_LINK_SPEED_40G;
>>  }
>>
>>  #ifdef RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE
>> diff --git a/drivers/net/i40e/i40e_ethdev.c
>> b/drivers/net/i40e/i40e_ethdev.c
>> index cce9e6f..dce31db 100644
>> --- a/drivers/net/i40e/i40e_ethdev.c
>> +++ b/drivers/net/i40e/i40e_ethdev.c
>> @@ -2287,6 +2287,7 @@ static void
>>  i40e_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info
>> *dev_info)
>>  {
>>         struct i40e_pf *pf =
>> I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
>> +       struct i40e_hw *hw =
>> I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>>         struct i40e_vsi *vsi = pf->main_vsi;
>>
>>         dev_info->max_rx_queues = vsi->nb_qps;
>> @@ -2358,6 +2359,13 @@ i40e_dev_info_get(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *dev_info)
>>                 dev_info->max_rx_queues += dev_info->vmdq_queue_num;
>>                 dev_info->max_tx_queues += dev_info->vmdq_queue_num;
>>         }
>> +
>> +       if (i40e_is_40G_device(hw->device_id))
>> +               /* For XL710 */
>> +               dev_info->speed_capa = ETH_LINK_SPEED_1G |
>> ETH_LINK_SPEED_10G;
>> +       else
>> +               /* For X710 */
>> +               dev_info->speed_capa = ETH_LINK_SPEED_10G |
>> ETH_LINK_SPEED_40G;
>>  }
>>
>>  static int
>> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
>> b/drivers/net/ixgbe/ixgbe_ethdev.c
>> index a0179d2..a98e8eb 100644
>> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
>> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>> @@ -2960,6 +2960,14 @@ ixgbe_dev_info_get(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *dev_info)
>>         dev_info->hash_key_size = IXGBE_HKEY_MAX_INDEX * sizeof(uint32_t);
>>         dev_info->reta_size = ixgbe_reta_size_get(hw->mac.type);
>>         dev_info->flow_type_rss_offloads = IXGBE_RSS_OFFLOAD_ALL;
>> +
>> +       dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G;
>> +       if (hw->mac.type == ixgbe_mac_X540 ||
>> +           hw->mac.type == ixgbe_mac_X540_vf ||
>> +           hw->mac.type == ixgbe_mac_X550 ||
>> +           hw->mac.type == ixgbe_mac_X550_vf) {
>> +               dev_info->speed_capa |= ETH_LINK_SPEED_100M;
>> +       }
>>  }
>>
>>  static const uint32_t *
>> diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
>> index f946f08..59ac423 100644
>> --- a/drivers/net/mlx4/mlx4.c
>> +++ b/drivers/net/mlx4/mlx4.c
>> @@ -4313,6 +4313,12 @@ mlx4_dev_infos_get(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *info)
>>                  0);
>>         if (priv_get_ifname(priv, &ifname) == 0)
>>                 info->if_index = if_nametoindex(ifname);
>> +       info->speed_capa =
>> +                       ETH_LINK_SPEED_1G |
>> +                       ETH_LINK_SPEED_10G |
>> +                       ETH_LINK_SPEED_20G |
>> +                       ETH_LINK_SPEED_40G |
>> +                       ETH_LINK_SPEED_56G;
>>         priv_unlock(priv);
>>  }
>>
>> diff --git a/drivers/net/mlx5/mlx5_ethdev.c
>> b/drivers/net/mlx5/mlx5_ethdev.c
>> index 58bfa16..d7a0eea 100644
>> --- a/drivers/net/mlx5/mlx5_ethdev.c
>> +++ b/drivers/net/mlx5/mlx5_ethdev.c
>> @@ -559,6 +559,14 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *info)
>>          * size if it is not fixed.
>>          * The API should be updated to solve this problem. */
>>         info->reta_size = priv->ind_table_max_size;
>> +       info->speed_capa =
>> +                       ETH_LINK_SPEED_1G |
>> +                       ETH_LINK_SPEED_10G |
>> +                       ETH_LINK_SPEED_20G |
>> +                       ETH_LINK_SPEED_25G |
>> +                       ETH_LINK_SPEED_40G |
>> +                       ETH_LINK_SPEED_50G |
>> +                       ETH_LINK_SPEED_56G;
>>         priv_unlock(priv);
>>  }
>>
>> diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
>> index 18ea0f4..bdeb21f 100644
>> --- a/drivers/net/nfp/nfp_net.c
>> +++ b/drivers/net/nfp/nfp_net.c
>> @@ -1061,6 +1061,8 @@ nfp_net_infos_get(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *dev_info)
>>
>>         dev_info->reta_size = NFP_NET_CFG_RSS_ITBL_SZ;
>>         dev_info->hash_key_size = NFP_NET_CFG_RSS_KEY_SZ;
>> +
>> +       dev_info->speed_capa = ETH_LINK_SPEED_50G;
>>  }
>>
>>  static const uint32_t *
>> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
>> index bc7d607..49fdcb7 100644
>> --- a/lib/librte_ether/rte_ethdev.h
>> +++ b/lib/librte_ether/rte_ethdev.h
>> @@ -242,6 +242,23 @@ struct rte_eth_stats {
>>  };
>>
>>  /**
>> + * Device supported speeds bitmap flags
>> + */
>> +#define ETH_LINK_SPEED_10M_HD   (1 <<  1)  /**<  10 Mbps half-duplex */
>> +#define ETH_LINK_SPEED_10M      (1 <<  2)  /**<  10 Mbps full-duplex */
>> +#define ETH_LINK_SPEED_100M_HD  (1 <<  3)  /**< 100 Mbps half-duplex */
>> +#define ETH_LINK_SPEED_100M     (1 <<  4)  /**< 100 Mbps full-duplex */
>> +#define ETH_LINK_SPEED_1G       (1 <<  5)  /**<   1 Gbps */
>> +#define ETH_LINK_SPEED_2_5G     (1 <<  6)  /**< 2.5 Gbps */
>> +#define ETH_LINK_SPEED_5G       (1 <<  7)  /**<   5 Gbps */
>> +#define ETH_LINK_SPEED_10G      (1 <<  8)  /**<  10 Gbps */
>> +#define ETH_LINK_SPEED_20G      (1 <<  9)  /**<  20 Gbps */
>> +#define ETH_LINK_SPEED_25G      (1 << 10)  /**<  25 Gbps */
>> +#define ETH_LINK_SPEED_40G      (1 << 11)  /**<  40 Gbps */
>> +#define ETH_LINK_SPEED_50G      (1 << 12)  /**<  50 Gbps */
>> +#define ETH_LINK_SPEED_56G      (1 << 13)  /**<  56 Gbps */
>> +
>> +/**
>>   * Ethernet numeric link speeds in Mbps
>>   */
>>  #define ETH_LINK_SPEED_AUTONEG     0 /**< Auto-negotiate link speed. */
>> @@ -850,6 +867,9 @@ struct rte_eth_conf {
>>  #define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for
>> tunneling packet. */
>>  #define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100
>>
>> +/**
>> + * Ethernet device information
>> + */
>>  struct rte_eth_dev_info {
>>         struct rte_pci_device *pci_dev; /**< Device PCI information. */
>>         const char *driver_name; /**< Device Driver name. */
>> @@ -878,6 +898,7 @@ struct rte_eth_dev_info {
>>         uint16_t vmdq_pool_base;  /**< First ID of VMDQ pools. */
>>         struct rte_eth_desc_lim rx_desc_lim;  /**< RX descriptors limits
>> */
>>         struct rte_eth_desc_lim tx_desc_lim;  /**< TX descriptors limits
>> */
>> +       uint32_t speed_capa;  /**< Supported speeds bitmap
>> (ETH_LINK_SPEED_). */
>>  };
>>
>>  /**
>> --
>> 2.1.4
>>
>>
>

  reply	other threads:[~2016-03-30  8:06 UTC|newest]

Thread overview: 166+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1443993003-1059-1-git-send-email-marcdevel@gmail.com>
2015-10-25 21:59 ` [dpdk-dev] [PATCH v6 0/5] ethdev: add speed capabilities and refactor link API Marc Sune
2015-10-25 21:59   ` [dpdk-dev] [PATCH v6 1/5] ethdev: Added ETH_SPEED_CAP bitmap for ports Marc Sune
2015-11-01 22:11     ` Thomas Monjalon
2015-11-18 23:08       ` Marc Sune
2015-10-25 21:59   ` [dpdk-dev] [PATCH v6 2/5] ethdev: Fill speed capability bitmaps in the PMDs Marc Sune
2015-10-25 21:59   ` [dpdk-dev] [PATCH v6 3/5] ethdev: redesign link speed config API Marc Sune
2015-10-25 22:03     ` Marc Sune
2015-11-01 22:16     ` Thomas Monjalon
2015-11-18 22:59       ` Marc Sune
2015-10-25 21:59   ` [dpdk-dev] [PATCH v6 4/5] doc: update with link changes Marc Sune
2015-10-25 22:00   ` [dpdk-dev] [PATCH v6 5/5] ethdev: add rte_eth_speed_to_bm_flag() to ver. map Marc Sune
2015-12-16 20:37   ` [dpdk-dev] [PATCH v6 0/5] ethdev: add speed capabilities and refactor link API Marc Sune
2015-12-16 20:44     ` Olga Shern
2016-01-29  0:42   ` [dpdk-dev] [PATCH v7 " Marc Sune
2016-01-29  0:42     ` [dpdk-dev] [PATCH v7 1/5] ethdev: Added ETH_SPEED_CAP bitmap for ports Marc Sune
2016-01-29  0:42     ` [dpdk-dev] [PATCH v7 2/5] ethdev: Fill speed capability bitmaps in the PMDs Marc Sune
2016-01-29  0:42     ` [dpdk-dev] [PATCH v7 3/5] ethdev: redesign link speed config API Marc Sune
2016-01-29  9:24       ` Ananyev, Konstantin
2016-01-29  9:37         ` Thomas Monjalon
2016-01-29  9:47           ` Ananyev, Konstantin
2016-01-29  9:53             ` Thomas Monjalon
2016-01-29 10:17               ` Ananyev, Konstantin
2016-01-29 12:40                 ` Marc
2016-02-01  0:40                 ` Zhang, Helin
2016-02-02  0:04                   ` Marc
2016-02-02  0:45                     ` [dpdk-dev] FW: " Zhang, Helin
2016-01-29 16:16       ` [dpdk-dev] " Nélio Laranjeiro
2016-01-31 21:24         ` Marc
2016-01-29  0:42     ` [dpdk-dev] [PATCH v7 4/5] doc: update with link changes Marc Sune
2016-01-29  0:42     ` [dpdk-dev] [PATCH v7 5/5] ethdev: add rte_eth_speed_to_bm_flag() to ver. map Marc Sune
2016-01-29 13:05       ` Panu Matilainen
2016-01-31 21:21         ` Marc
2016-02-14 22:17     ` [dpdk-dev] [PATCH v8 0/4] ethdev: add speed capabilities and refactor link API Marc Sune
2016-02-14 22:17       ` [dpdk-dev] [PATCH v8 1/4] ethdev: Added ETH_SPEED_CAP bitmap for ports Marc Sune
2016-02-16 20:42         ` Stephen Hemminger
2016-02-14 22:17       ` [dpdk-dev] [PATCH v8 2/4] ethdev: Fill speed capability bitmaps in the PMDs Marc Sune
2016-02-15  8:43         ` Nélio Laranjeiro
2016-02-15  9:17           ` Chen, Jing D
2016-02-15 14:43         ` Rahul Lakkireddy
2016-02-15 17:14           ` Marc
2016-02-16 15:25             ` Nélio Laranjeiro
2016-02-16 22:49               ` Marc
2016-02-14 22:17       ` [dpdk-dev] [PATCH v8 3/4] ethdev: redesign link speed config API Marc Sune
2016-02-15  8:46         ` Nélio Laranjeiro
2016-02-15 11:00           ` Marc
2016-02-15 11:39             ` Olga Shern
2016-02-16 10:28         ` Matej Vido
2016-02-16 22:55           ` Marc
2016-02-14 22:17       ` [dpdk-dev] [PATCH v8 4/4] doc: update with link changes Marc Sune
2016-02-18 18:14         ` Mcnamara, John
2016-02-28 22:17           ` Marc
2016-03-01  0:45       ` [dpdk-dev] [PATCH v9 0/4] ethdev: add speed capabilities and refactor link API Marc Sune
2016-03-01  0:45         ` [dpdk-dev] [PATCH v9 1/4] ethdev: Added ETH_SPEED_CAP bitmap for ports Marc Sune
2016-03-01  0:45         ` [dpdk-dev] [PATCH v9 2/4] ethdev: Fill speed capability bitmaps in the PMDs Marc Sune
2016-03-01  0:45         ` [dpdk-dev] [PATCH v9 3/4] ethdev: redesign link speed config API Marc Sune
2016-03-09  8:45           ` Nélio Laranjeiro
2016-03-09 10:09             ` Marc
2016-03-09 10:20               ` Nélio Laranjeiro
2016-03-01  0:45         ` [dpdk-dev] [PATCH v9 4/4] doc: update with link changes Marc Sune
2016-03-08 15:00         ` [dpdk-dev] [PATCH v9 0/4] ethdev: add speed capabilities and refactor link API Marc Sune
2016-03-08 16:53           ` Nélio Laranjeiro
2016-03-09  9:29             ` Nélio Laranjeiro
2016-03-09 10:09               ` Nélio Laranjeiro
2016-03-09 20:57                 ` Marc
2016-03-14 21:55         ` [dpdk-dev] [PATCH v10 0/8] ethdev: 100G and link speed API refactoring Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 1/8] ethdev: use constants for link state Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 2/8] ethdev: use constants for link duplex Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 3/8] app/testpmd: move speed and duplex parsing in a function Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 4/8] ethdev: rename link speed constants Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 5/8] ethdev: add speed capabilities Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 6/8] ethdev: redesign link speed config Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 7/8] ethdev: convert speed number to bitmap flag Thomas Monjalon
2016-03-14 21:55           ` [dpdk-dev] [PATCH v10 8/8] ethdev: add 100G link speed Thomas Monjalon
2016-03-15  0:04           ` [dpdk-dev] [PATCH v10 0/8] ethdev: 100G and link speed API refactoring Matej Vido
2016-03-15  7:12             ` Thomas Monjalon
2016-03-15  7:45               ` Matej Vido
2016-03-15  8:38           ` Nélio Laranjeiro
2016-03-15 13:12           ` [dpdk-dev] [PATCH 0/4] szedata2: " Matej Vido
2016-03-15 13:12             ` [dpdk-dev] [PATCH 1/4] szedata2: use constants for link state Matej Vido
2016-03-15 13:12             ` [dpdk-dev] [PATCH 2/4] szedata2: rename link speed constants Matej Vido
2016-03-15 13:12             ` [dpdk-dev] [PATCH 3/4] szedata2: redesign link speed config Matej Vido
2016-03-15 13:12             ` [dpdk-dev] [PATCH 4/4] szedata2: add 100G link speed Matej Vido
2016-03-15 13:41               ` Thomas Monjalon
2016-03-15 13:47                 ` Matej Vido
2016-03-15 13:50                 ` Matej Vido
2016-03-15 20:51                   ` Thomas Monjalon
2016-03-17 18:08           ` [dpdk-dev] [PATCH v11 0/8] ethdev: 100G and link speed API refactoring Thomas Monjalon
2016-03-17 18:08             ` [dpdk-dev] [PATCH v11 1/8] ethdev: use constants for link state Thomas Monjalon
2016-03-17 18:08             ` [dpdk-dev] [PATCH v11 2/8] ethdev: use constants for link duplex Thomas Monjalon
2016-03-23  2:44               ` Zhang, Helin
2016-03-23  8:34                 ` Thomas Monjalon
2016-03-17 18:09             ` [dpdk-dev] [PATCH v11 3/8] app/testpmd: move speed and duplex parsing in a function Thomas Monjalon
2016-03-17 18:09             ` [dpdk-dev] [PATCH v11 4/8] ethdev: rename link speed constants Thomas Monjalon
2016-03-23  2:52               ` Zhang, Helin
2016-03-23  8:31                 ` Thomas Monjalon
2016-03-17 18:09             ` [dpdk-dev] [PATCH v11 5/8] ethdev: add speed capabilities Thomas Monjalon
2016-03-18  5:18               ` Chen, Jing D
2016-03-18  8:06                 ` Thomas Monjalon
2016-03-18  9:28               ` Adrien Mazarguil
2016-03-18 10:12                 ` Thomas Monjalon
2016-03-17 18:09             ` [dpdk-dev] [PATCH v11 6/8] ethdev: redesign link speed config Thomas Monjalon
2016-03-17 18:09             ` [dpdk-dev] [PATCH v11 7/8] ethdev: convert speed number to bitmap flag Thomas Monjalon
2016-03-17 18:09             ` [dpdk-dev] [PATCH v11 8/8] ethdev: add 100G link speed Thomas Monjalon
2016-03-22 19:58             ` [dpdk-dev] [PATCH v11 0/8] ethdev: 100G and link speed API refactoring Thomas Monjalon
2016-03-23  1:18               ` Xu, Qian Q
2016-03-23  8:39                 ` Thomas Monjalon
2016-03-23 20:54                 ` Marc
2016-03-24  6:21                   ` Xu, Qian Q
2016-03-24  7:47                     ` Marc
2016-03-25  1:02                       ` Xu, Qian Q
2016-03-25  9:35                         ` Thomas Monjalon
2016-03-25 15:07                           ` Zhang, Helin
2016-03-25 15:32                             ` Thomas Monjalon
2016-03-25 20:41                             ` Marc
2016-03-25 21:30                               ` Marc
2016-03-26  1:25                                 ` Marc
2016-03-26  8:08                                 ` Thomas Monjalon
2016-03-26 10:24                                   ` Marc
2016-03-27  9:53                                     ` Thomas Monjalon
2016-03-27 19:39                                       ` Marc
2016-03-28 13:42                                         ` Thomas Monjalon
2016-03-28 19:11                                           ` Marc
2016-03-24 17:32             ` Matej Vido
2016-03-25 19:42             ` [dpdk-dev] [PATCH v12 " Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 1/8] ethdev: use constants for link state Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 2/8] ethdev: use constants for link duplex Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 3/8] app/testpmd: move speed and duplex parsing in a function Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 4/8] ethdev: rename link speed constants Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 5/8] ethdev: add speed capabilities Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 6/8] ethdev: redesign link speed config Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 7/8] ethdev: convert speed number to bitmap flag Thomas Monjalon
2016-03-25 19:42               ` [dpdk-dev] [PATCH v12 8/8] ethdev: add 100G link speed Thomas Monjalon
2016-03-26  1:27               ` [dpdk-dev] [PATCH v13 0/8] ethdev: 100G and link speed API refactoring Marc Sune
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 1/8] ethdev: use constants for link state Marc Sune
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 2/8] ethdev: use constants for link duplex Marc Sune
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 3/8] app/testpmd: move speed and duplex parsing in a function Marc Sune
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 4/8] ethdev: rename link speed constants Marc Sune
2016-04-06  8:34                   ` Weglicki, MichalX
2016-04-06  8:52                     ` Thomas Monjalon
2016-04-06  9:16                       ` Weglicki, MichalX
2016-04-06  9:34                         ` Thomas Monjalon
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 5/8] ethdev: add speed capabilities Marc Sune
2016-03-29 13:31                   ` Alejandro Lucero
2016-03-30  8:06                     ` Marc [this message]
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 6/8] ethdev: redesign link speed config Marc Sune
2016-03-29  6:18                   ` Xing, Beilei
2016-03-30  7:59                     ` Marc
2016-03-31  0:57                       ` Xing, Beilei
2016-03-31 12:28                         ` Thomas Monjalon
2016-04-01  9:53                           ` Xing, Beilei
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 7/8] ethdev: convert speed number to bitmap flag Marc Sune
2016-03-26  1:27                 ` [dpdk-dev] [PATCH v13 8/8] ethdev: add 100G link speed Marc Sune
2016-03-26  8:11                 ` [dpdk-dev] [PATCH v13 0/8] ethdev: 100G and link speed API refactoring Thomas Monjalon
2016-03-31 16:17                   ` Adrien Mazarguil
2016-03-30  9:23                 ` Thomas Monjalon
2016-03-31  6:25                   ` Lu, Wenzhuo
2016-03-31 22:12                 ` [dpdk-dev] [PATCH v14 " Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 1/8] ethdev: use constants for link state Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 2/8] ethdev: use constants for link duplex Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 3/8] app/testpmd: move speed and duplex parsing in a function Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 4/8] ethdev: rename link speed constants Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 5/8] ethdev: add speed capabilities Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 6/8] ethdev: redesign link speed config Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 7/8] ethdev: convert speed number to bitmap flag Marc Sune
2016-03-31 22:12                   ` [dpdk-dev] [PATCH v14 8/8] ethdev: add 100G link speed Marc Sune
2016-04-01 19:38                   ` [dpdk-dev] [PATCH v14 0/8] ethdev: 100G and link speed API refactoring Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAExC=0T2gNLUhgOkg3cn-kB=8z2vOiZgmXwe=Mj4=3mWdtRz-g@mail.gmail.com' \
    --to=marcdevel@gmail.com \
    --cc=alejandro.lucero@netronome.com \
    --cc=beilei.xing@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=konstantin.ananyev@intel.com \
    --cc=michael.j.glynn@intel.com \
    --cc=qian.q.xu@intel.com \
    --cc=thomas.monjalon@6wind.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).