Re: [dpdk-dev] Error while compiling DPDK

[Masaru Oki <m-oki@stratosphere.co.jp>]

> I'm sorry for the Korean characteristics. It was shown because My Fedora
OS
> is set to use Korean as a default language.

Try env LANG=C make install ...


2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi@gmail.com>:

> Dear choi,
>
> Thank you for the reply.
>
> I've been trying to install DPDK while changing the command as you
> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was still
> shown;
>
>
> [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc
> ================== Installing x86_64-default-linuxapp-gcc
> Configuration done
> == Build scripts
> == Build scripts/testhost
>   HOSTCC testhost.o
>   HOSTLD testhost
>   INSTALL-HOSTAPP testhost
> == Build lib
> == Build lib/librte_eal
> == Build lib/librte_eal/common
>   SYMLINK-FILE include/rte_atomic.h
>   SYMLINK-FILE include/rte_branch_prediction.h
>   SYMLINK-FILE include/rte_byteorder.h
>   SYMLINK-FILE include/rte_common.h
>   SYMLINK-FILE include/rte_cycles.h
>   SYMLINK-FILE include/rte_debug.h
>   SYMLINK-FILE include/rte_eal.h
>   SYMLINK-FILE include/rte_errno.h
>   SYMLINK-FILE include/rte_launch.h
>   SYMLINK-FILE include/rte_lcore.h
>   SYMLINK-FILE include/rte_log.h
>   SYMLINK-FILE include/rte_memcpy.h
>   SYMLINK-FILE include/rte_memory.h
>   SYMLINK-FILE include/rte_memzone.h
>   SYMLINK-FILE include/rte_pci.h
>   SYMLINK-FILE include/rte_pci_dev_ids.h
>   SYMLINK-FILE include/rte_per_lcore.h
>   SYMLINK-FILE include/rte_prefetch.h
>   SYMLINK-FILE include/rte_random.h
>   SYMLINK-FILE include/rte_rwlock.h
>   SYMLINK-FILE include/rte_spinlock.h
>   SYMLINK-FILE include/rte_tailq.h
>   SYMLINK-FILE include/rte_interrupts.h
>   SYMLINK-FILE include/rte_alarm.h
>   SYMLINK-FILE include/rte_string_fns.h
>   SYMLINK-FILE include/rte_cpuflags.h
>   SYMLINK-FILE include/rte_version.h
>   SYMLINK-FILE include/rte_tailq_elem.h
>   SYMLINK-FILE include/rte_eal_memconfig.h
>   SYMLINK-FILE include/rte_malloc_heap.h
>   SYMLINK-FILE include/rte_hexdump.h
>   SYMLINK-FILE include/arch/rte_atomic.h
> == Build lib/librte_eal/linuxapp
> == Build lib/librte_eal/linuxapp/igb_uio
>   LD
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o
>   CC [M]
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
>   Building modules, stage 2.
>   MODPOST 1 modules
>   CC
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o
>   LD [M]
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko
> INSTALL-MODULE igb_uio.ko
> == Build lib/librte_eal/linuxapp/eal
>   CC eal.o
> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다
> make[7]: *** [eal.o] 오류 1
> make[6]: *** [eal] 오류 2
> make[5]: *** [linuxapp] 오류 2
> make[4]: *** [librte_eal] 오류 2
> make[3]: *** [lib] 오류 2
> make[2]: *** [all] 오류 2
> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2
> make: *** [install] 오류 2
>
> I'm sorry for the Korean characteristics. It was shown because My Fedora OS
> is set to use Korean as a default language.
>
> I set two environmental variables following the
> intel-dpdk-programmers-guide.pdf as below:
>
> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0
> export RTE_TARGET=x86_64-native-linuxapp-gcc
>
> What should I do in order to install DPDK successfully?...
>
> Thanks in advance.
>
> Best regards
>
> Byeong-Gi KIM
>
>
>
>
> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi@intel.com>:
>
> >  Hi Mr. Kim,
> >
> > Please do not compile with "T=x86*gcc" because it will compile BSD app
> > too, which cause the error.
> >
> > Please complile only the configuration you need. This should remove the
> > error.
> >
> >
> > Regards,
> > Choi, Sy Jong
> >
> >
> > -----Original Message-----
> > *From: *BYEONG-GI KIM [kimbyeonggi@gmail.com]
> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time
> > *To: *Dpdk-ovs@lists.01.org; dev@dpdk.org
> > *Subject: *[dpdk-dev] Error while compiling DPDK
> >
> > Hello.
> >
> > An error occured while compiling DPDK 1.6.0r2 as below:
> >
> > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc
> > ...Installing...
> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function
> > ‘rte_eal_init’:
> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error:
> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type
> > ‘pthread_t’ [-Werror=format=]
> >   RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n",
> >   ^
> >
> > The current OS is Fedora20. What should I do?...
> >
> > Best regards
> >
> > Byeong-Gi KIM
> >
>