From: Vincent JARDIN <vincent.jardin@6wind.com>
To: Neil Horman <nhorman@tuxdriver.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCHv2] librte_acl make it build/work for 'default' target
Date: Thu, 7 Aug 2014 22:58:27 +0200 [thread overview]
Message-ID: <CAG8AbRVUFLhzeKmA+Hx8sBNHnBr6608ebDyfEuSBu7Hx-RxWdw@mail.gmail.com> (raw)
In-Reply-To: <20140807201134.GA1632@hmsreliant.think-freely.org>
What's about using function versioning attributes too:
https://gcc.gnu.org/wiki/FunctionMultiVersioning
?
Le 7 août 2014 22:11, "Neil Horman" <nhorman@tuxdriver.com> a écrit :
>
> On Thu, Aug 07, 2014 at 07:31:03PM +0100, Konstantin Ananyev wrote:
> > Make ACL library to build/work on 'default' architecture:
> > - make rte_acl_classify_scalar really scalar
> > (make sure it wouldn't use sse4 instrincts through resolve_priority()).
> > - Provide two versions of rte_acl_classify code path:
> > rte_acl_classify_sse() - could be build and used only on systems with
sse4.2
> > and upper, return -ENOTSUP on lower arch.
> > rte_acl_classify_scalar() - a slower version, but could be build and
used
> > on all systems.
> > - keep common code shared between these two codepaths.
> >
> > v2 chages:
> > run-time selection of most appropriate code-path for given ISA.
> > By default the highest supprted one is selected.
> > User can still override that selection by manually assigning new value
to
> > the global function pointer rte_acl_default_classify.
> > rte_acl_classify() becomes a macro calling whatever
rte_acl_default_classify
> > points to.
> >
> >
> > Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
>
> This is alot better thank you. A few remaining issues.
>
> > ---
> > app/test-acl/main.c | 13 +-
> > lib/librte_acl/Makefile | 5 +-
> > lib/librte_acl/acl_bld.c | 5 +-
> > lib/librte_acl/acl_match_check.def | 92 ++++
> > lib/librte_acl/acl_run.c | 944
-------------------------------------
> > lib/librte_acl/acl_run.h | 220 +++++++++
> > lib/librte_acl/acl_run_scalar.c | 197 ++++++++
> > lib/librte_acl/acl_run_sse.c | 630 +++++++++++++++++++++++++
> > lib/librte_acl/rte_acl.c | 15 +
> > lib/librte_acl/rte_acl.h | 24 +-
> > 10 files changed, 1189 insertions(+), 956 deletions(-)
> > create mode 100644 lib/librte_acl/acl_match_check.def
> > delete mode 100644 lib/librte_acl/acl_run.c
> > create mode 100644 lib/librte_acl/acl_run.h
> > create mode 100644 lib/librte_acl/acl_run_scalar.c
> > create mode 100644 lib/librte_acl/acl_run_sse.c
> >
> > diff --git a/app/test-acl/main.c b/app/test-acl/main.c
> > index d654409..45c6fa6 100644
> > --- a/app/test-acl/main.c
> > +++ b/app/test-acl/main.c
> > @@ -787,6 +787,10 @@ acx_init(void)
> > /* perform build. */
> > ret = rte_acl_build(config.acx, &cfg);
> >
> > + /* setup default rte_acl_classify */
> > + if (config.scalar)
> > + rte_acl_default_classify = rte_acl_classify_scalar;
> > +
> Exporting this variable as part of the ABI is a bad idea. If the
prototype of
> the function changes you have to update all your applications. Make the
pointer
> an internal symbol and set it using a get/set routine with an enum to
represent
> the path to choose. That will help isolate the ABI from the internal
> implementation. It will also let you prevent things like selecting a run
time
> path that is incompatible with the running system, and prevent path
switching
> during searches, which may produce unexpected results.
>
> ><snip>
> > diff --git a/lib/librte_acl/acl_run.c b/lib/librte_acl/acl_run.c
> > deleted file mode 100644
> > index e3d9fc1..0000000
> > --- a/lib/librte_acl/acl_run.c
> > +++ /dev/null
> > @@ -1,944 +0,0 @@
> > -/*-
> > - * BSD LICENSE
> > - *
> > - * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > - * All rights reserved.
> > - *
> > - * Redistribution and use in source and binary forms, with or without
> > - * modification, are permitted provided that the following conditions
> ><snip>
> > +
> > +#define __func_resolve_priority__ resolve_priority_scalar
> > +#define __func_match_check__ acl_match_check_scalar
> > +#include "acl_match_check.def"
> > +
> I get this lets you make some more code common, but its just unpleasant
to trace
> through. Looking at the defintion of __func_match_check__ I don't see
anything
> particularly performance sensitive there. What if instead you simply
redefined
> __func_match_check__ in a common internal header as acl_match_check (a
generic
> function), and had it accept priority resolution function as an argument?
That
> would still give you all the performance enhancements without having to
include
> c files in the middle of other c files, and would make the code a bit more
> parseable.
>
> > +/*
> > + * When processing the transition, rather than using if/else
> > + * construct, the offset is calculated for DFA and QRANGE and
> > + * then conditionally added to the address based on node type.
> > + * This is done to avoid branch mis-predictions. Since the
> > + * offset is rather simple calculation it is more efficient
> > + * to do the calculation and do a condition move rather than
> > + * a conditional branch to determine which calculation to do.
> > + */
> > +static inline uint32_t
> > +scan_forward(uint32_t input, uint32_t max)
> > +{
> > + return (input == 0) ? max : rte_bsf32(input);
> > +}
> > + }
> > +}
> ><snip>
> > +
> > +#define __func_resolve_priority__ resolve_priority_sse
> > +#define __func_match_check__ acl_match_check_sse
> > +#include "acl_match_check.def"
> > +
> Same deal as above.
>
> > +/*
> > + * Extract transitions from an XMM register and check for any matches
> > + */
> > +static void
> > +acl_process_matches(xmm_t *indicies, int slot, const struct
rte_acl_ctx *ctx,
> > + struct parms *parms, struct acl_flow_data *flows)
> > +{
> > + uint64_t transition1, transition2;
> > +
> > + /* extract transition from low 64 bits. */
> > + transition1 = MM_CVT64(*indicies);
> > +
> > + /* extract transition from high 64 bits. */
> > + *indicies = MM_SHUFFLE32(*indicies, SHUFFLE32_SWAP64);
> > + transition2 = MM_CVT64(*indicies);
> > +
> > + transition1 = acl_match_check_sse(transition1, slot, ctx,
> > + parms, flows);
> > + transition2 = acl_match_check_sse(transition2, slot + 1, ctx,
> > + parms, flows);
> > +
> > + /* update indicies with new transitions. */
> > + *indicies = MM_SET64(transition2, transition1);
> > +}
> > +
> > +/*
> > + * Check for a match in 2 transitions (contained in SSE register)
> > + */
> > +static inline void
> > +acl_match_check_x2(int slot, const struct rte_acl_ctx *ctx, struct
parms *parms,
> > + struct acl_flow_data *flows, xmm_t *indicies, xmm_t match_mask)
> > +{
> > + xmm_t temp;
> > +
> > + temp = MM_AND(match_mask, *indicies);
> > + while (!MM_TESTZ(temp, temp)) {
> > + acl_process_matches(indicies, slot, ctx, parms, flows);
> > + temp = MM_AND(match_mask, *indicies);
> > + }
> > +}
> > +
> > +/*
> > + * Check for any match in 4 transitions (contained in 2 SSE registers)
> > + */
> > +static inline void
> > +acl_match_check_x4(int slot, const struct rte_acl_ctx *ctx, struct
parms *parms,
> > + struct acl_flow_data *flows, xmm_t *indicies1, xmm_t *indicies2,
> > + xmm_t match_mask)
> > +{
> > + xmm_t temp;
> > +
> > + /* put low 32 bits of each transition into one register */
> > + temp = (xmm_t)MM_SHUFFLEPS((__m128)*indicies1, (__m128)*indicies2,
> > + 0x88);
> > + /* test for match node */
> > + temp = MM_AND(match_mask, temp);
> > +
> > + while (!MM_TESTZ(temp, temp)) {
> > + acl_process_matches(indicies1, slot, ctx, parms, flows);
> > + acl_process_matches(indicies2, slot + 2, ctx, parms,
flows);
> > +
> > + temp = (xmm_t)MM_SHUFFLEPS((__m128)*indicies1,
> > + (__m128)*indicies2,
> > + 0x88);
> > + temp = MM_AND(match_mask, temp);
> > + }
> > +}
> > +
> > +/*
> > + * Calculate the address of the next transition for
> > + * all types of nodes. Note that only DFA nodes and range
> > + * nodes actually transition to another node. Match
> > + * nodes don't move.
> > + */
> > +static inline xmm_t
> > +acl_calc_addr(xmm_t index_mask, xmm_t next_input, xmm_t shuffle_input,
> > + xmm_t ones_16, xmm_t bytes, xmm_t type_quad_range,
> > + xmm_t *indicies1, xmm_t *indicies2)
> > +{
> > + xmm_t addr, node_types, temp;
> > +
> > + /*
> > + * Note that no transition is done for a match
> > + * node and therefore a stream freezes when
> > + * it reaches a match.
> > + */
> > +
> > + /* Shuffle low 32 into temp and high 32 into indicies2 */
> > + temp = (xmm_t)MM_SHUFFLEPS((__m128)*indicies1, (__m128)*indicies2,
> > + 0x88);
> > + *indicies2 = (xmm_t)MM_SHUFFLEPS((__m128)*indicies1,
> > + (__m128)*indicies2, 0xdd);
> > +
> > + /* Calc node type and node addr */
> > + node_types = MM_ANDNOT(index_mask, temp);
> > + addr = MM_AND(index_mask, temp);
> > +
> > + /*
> > + * Calc addr for DFAs - addr = dfa_index + input_byte
> > + */
> > +
> > + /* mask for DFA type (0) nodes */
> > + temp = MM_CMPEQ32(node_types, MM_XOR(node_types, node_types));
> > +
> > + /* add input byte to DFA position */
> > + temp = MM_AND(temp, bytes);
> > + temp = MM_AND(temp, next_input);
> > + addr = MM_ADD32(addr, temp);
> > +
> > + /*
> > + * Calc addr for Range nodes -> range_index + range(input)
> > + */
> > + node_types = MM_CMPEQ32(node_types, type_quad_range);
> > +
> > + /*
> > + * Calculate number of range boundaries that are less than the
> > + * input value. Range boundaries for each node are in signed 8
bit,
> > + * ordered from -128 to 127 in the indicies2 register.
> > + * This is effectively a popcnt of bytes that are greater than the
> > + * input byte.
> > + */
> > +
> > + /* shuffle input byte to all 4 positions of 32 bit value */
> > + temp = MM_SHUFFLE8(next_input, shuffle_input);
> > +
> > + /* check ranges */
> > + temp = MM_CMPGT8(temp, *indicies2);
> > +
> > + /* convert -1 to 1 (bytes greater than input byte */
> > + temp = MM_SIGN8(temp, temp);
> > +
> > + /* horizontal add pairs of bytes into words */
> > + temp = MM_MADD8(temp, temp);
> > +
> > + /* horizontal add pairs of words into dwords */
> > + temp = MM_MADD16(temp, ones_16);
> > +
> > + /* mask to range type nodes */
> > + temp = MM_AND(temp, node_types);
> > +
> > + /* add index into node position */
> > + return MM_ADD32(addr, temp);
> > +}
> > +
> > +/*
> > + * Process 4 transitions (in 2 SIMD registers) in parallel
> > + */
> > +static inline xmm_t
> > +transition4(xmm_t index_mask, xmm_t next_input, xmm_t shuffle_input,
> > + xmm_t ones_16, xmm_t bytes, xmm_t type_quad_range,
> > + const uint64_t *trans, xmm_t *indicies1, xmm_t *indicies2)
> > +{
> > + xmm_t addr;
> > + uint64_t trans0, trans2;
> > +
> > + /* Calculate the address (array index) for all 4 transitions. */
> > +
> > + addr = acl_calc_addr(index_mask, next_input, shuffle_input,
ones_16,
> > + bytes, type_quad_range, indicies1, indicies2);
> > +
> > + /* Gather 64 bit transitions and pack back into 2 registers. */
> > +
> > + trans0 = trans[MM_CVT32(addr)];
> > +
> > + /* get slot 2 */
> > +
> > + /* {x0, x1, x2, x3} -> {x2, x1, x2, x3} */
> > + addr = MM_SHUFFLE32(addr, SHUFFLE32_SLOT2);
> > + trans2 = trans[MM_CVT32(addr)];
> > +
> > + /* get slot 1 */
> > +
> > + /* {x2, x1, x2, x3} -> {x1, x1, x2, x3} */
> > + addr = MM_SHUFFLE32(addr, SHUFFLE32_SLOT1);
> > + *indicies1 = MM_SET64(trans[MM_CVT32(addr)], trans0);
> > +
> > + /* get slot 3 */
> > +
> > + /* {x1, x1, x2, x3} -> {x3, x1, x2, x3} */
> > + addr = MM_SHUFFLE32(addr, SHUFFLE32_SLOT3);
> > + *indicies2 = MM_SET64(trans[MM_CVT32(addr)], trans2);
> > +
> > + return MM_SRL32(next_input, 8);
> > +}
> > +
> > +/*
> > + * Execute trie traversal with 8 traversals in parallel
> > + */
> > +static inline int
> > +search_sse_8(const struct rte_acl_ctx *ctx, const uint8_t **data,
> > + uint32_t *results, uint32_t total_packets, uint32_t categories)
> > +{
> > + int n;
> > + struct acl_flow_data flows;
> > + uint64_t index_array[MAX_SEARCHES_SSE8];
> > + struct completion cmplt[MAX_SEARCHES_SSE8];
> > + struct parms parms[MAX_SEARCHES_SSE8];
> > + xmm_t input0, input1;
> > + xmm_t indicies1, indicies2, indicies3, indicies4;
> > +
> > + acl_set_flow(&flows, cmplt, RTE_DIM(cmplt), data, results,
> > + total_packets, categories, ctx->trans_table);
> > +
> > + for (n = 0; n < MAX_SEARCHES_SSE8; n++) {
> > + cmplt[n].count = 0;
> > + index_array[n] = acl_start_next_trie(&flows, parms, n,
ctx);
> > + }
> > +
> > + /*
> > + * indicies1 contains index_array[0,1]
> > + * indicies2 contains index_array[2,3]
> > + * indicies3 contains index_array[4,5]
> > + * indicies4 contains index_array[6,7]
> > + */
> > +
> > + indicies1 = MM_LOADU((xmm_t *) &index_array[0]);
> > + indicies2 = MM_LOADU((xmm_t *) &index_array[2]);
> > +
> > + indicies3 = MM_LOADU((xmm_t *) &index_array[4]);
> > + indicies4 = MM_LOADU((xmm_t *) &index_array[6]);
> > +
> > + /* Check for any matches. */
> > + acl_match_check_x4(0, ctx, parms, &flows,
> > + &indicies1, &indicies2, mm_match_mask.m);
> > + acl_match_check_x4(4, ctx, parms, &flows,
> > + &indicies3, &indicies4, mm_match_mask.m);
> > +
> > + while (flows.started > 0) {
> > +
> > + /* Gather 4 bytes of input data for each stream. */
> > + input0 = MM_INSERT32(mm_ones_16.m, GET_NEXT_4BYTES(parms,
0),
> > + 0);
> > + input1 = MM_INSERT32(mm_ones_16.m, GET_NEXT_4BYTES(parms,
4),
> > + 0);
> > +
> > + input0 = MM_INSERT32(input0, GET_NEXT_4BYTES(parms, 1),
1);
> > + input1 = MM_INSERT32(input1, GET_NEXT_4BYTES(parms, 5),
1);
> > +
> > + input0 = MM_INSERT32(input0, GET_NEXT_4BYTES(parms, 2),
2);
> > + input1 = MM_INSERT32(input1, GET_NEXT_4BYTES(parms, 6),
2);
> > +
> > + input0 = MM_INSERT32(input0, GET_NEXT_4BYTES(parms, 3),
3);
> > + input1 = MM_INSERT32(input1, GET_NEXT_4BYTES(parms, 7),
3);
> > +
> > + /* Process the 4 bytes of input on each stream. */
> > +
> > + input0 = transition4(mm_index_mask.m, input0,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + input1 = transition4(mm_index_mask.m, input1,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies3, &indicies4);
> > +
> > + input0 = transition4(mm_index_mask.m, input0,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + input1 = transition4(mm_index_mask.m, input1,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies3, &indicies4);
> > +
> > + input0 = transition4(mm_index_mask.m, input0,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + input1 = transition4(mm_index_mask.m, input1,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies3, &indicies4);
> > +
> > + input0 = transition4(mm_index_mask.m, input0,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + input1 = transition4(mm_index_mask.m, input1,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies3, &indicies4);
> > +
> > + /* Check for any matches. */
> > + acl_match_check_x4(0, ctx, parms, &flows,
> > + &indicies1, &indicies2, mm_match_mask.m);
> > + acl_match_check_x4(4, ctx, parms, &flows,
> > + &indicies3, &indicies4, mm_match_mask.m);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Execute trie traversal with 4 traversals in parallel
> > + */
> > +static inline int
> > +search_sse_4(const struct rte_acl_ctx *ctx, const uint8_t **data,
> > + uint32_t *results, int total_packets, uint32_t categories)
> > +{
> > + int n;
> > + struct acl_flow_data flows;
> > + uint64_t index_array[MAX_SEARCHES_SSE4];
> > + struct completion cmplt[MAX_SEARCHES_SSE4];
> > + struct parms parms[MAX_SEARCHES_SSE4];
> > + xmm_t input, indicies1, indicies2;
> > +
> > + acl_set_flow(&flows, cmplt, RTE_DIM(cmplt), data, results,
> > + total_packets, categories, ctx->trans_table);
> > +
> > + for (n = 0; n < MAX_SEARCHES_SSE4; n++) {
> > + cmplt[n].count = 0;
> > + index_array[n] = acl_start_next_trie(&flows, parms, n,
ctx);
> > + }
> > +
> > + indicies1 = MM_LOADU((xmm_t *) &index_array[0]);
> > + indicies2 = MM_LOADU((xmm_t *) &index_array[2]);
> > +
> > + /* Check for any matches. */
> > + acl_match_check_x4(0, ctx, parms, &flows,
> > + &indicies1, &indicies2, mm_match_mask.m);
> > +
> > + while (flows.started > 0) {
> > +
> > + /* Gather 4 bytes of input data for each stream. */
> > + input = MM_INSERT32(mm_ones_16.m, GET_NEXT_4BYTES(parms,
0), 0);
> > + input = MM_INSERT32(input, GET_NEXT_4BYTES(parms, 1), 1);
> > + input = MM_INSERT32(input, GET_NEXT_4BYTES(parms, 2), 2);
> > + input = MM_INSERT32(input, GET_NEXT_4BYTES(parms, 3), 3);
> > +
> > + /* Process the 4 bytes of input on each stream. */
> > + input = transition4(mm_index_mask.m, input,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + input = transition4(mm_index_mask.m, input,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + input = transition4(mm_index_mask.m, input,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + input = transition4(mm_index_mask.m, input,
> > + mm_shuffle_input.m, mm_ones_16.m,
> > + mm_bytes.m, mm_type_quad_range.m,
> > + flows.trans, &indicies1, &indicies2);
> > +
> > + /* Check for any matches. */
> > + acl_match_check_x4(0, ctx, parms, &flows,
> > + &indicies1, &indicies2, mm_match_mask.m);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static inline xmm_t
> > +transition2(xmm_t index_mask, xmm_t next_input, xmm_t shuffle_input,
> > + xmm_t ones_16, xmm_t bytes, xmm_t type_quad_range,
> > + const uint64_t *trans, xmm_t *indicies1)
> > +{
> > + uint64_t t;
> > + xmm_t addr, indicies2;
> > +
> > + indicies2 = MM_XOR(ones_16, ones_16);
> > +
> > + addr = acl_calc_addr(index_mask, next_input, shuffle_input,
ones_16,
> > + bytes, type_quad_range, indicies1, &indicies2);
> > +
> > + /* Gather 64 bit transitions and pack 2 per register. */
> > +
> > + t = trans[MM_CVT32(addr)];
> > +
> > + /* get slot 1 */
> > + addr = MM_SHUFFLE32(addr, SHUFFLE32_SLOT1);
> > + *indicies1 = MM_SET64(trans[MM_CVT32(addr)], t);
> > +
> > + return MM_SRL32(next_input, 8);
> > +}
> > +
> > +/*
> > + * Execute trie traversal with 2 traversals in parallel.
> > + */
> > +static inline int
> > +search_sse_2(const struct rte_acl_ctx *ctx, const uint8_t **data,
> > + uint32_t *results, uint32_t total_packets, uint32_t categories)
> > +{
> > + int n;
> > + struct acl_flow_data flows;
> > + uint64_t index_array[MAX_SEARCHES_SSE2];
> > + struct completion cmplt[MAX_SEARCHES_SSE2];
> > + struct parms parms[MAX_SEARCHES_SSE2];
> > + xmm_t input, indicies;
> > +
> > + acl_set_flow(&flows, cmplt, RTE_DIM(cmplt), data, results,
> > + total_packets, categories, ctx->trans_table);
> > +
> > + for (n = 0; n < MAX_SEARCHES_SSE2; n++) {
> > + cmplt[n].count = 0;
> > + index_array[n] = acl_start_next_trie(&flows, parms, n,
ctx);
> > + }
> > +
> > + indicies = MM_LOADU((xmm_t *) &index_array[0]);
> > +
> > + /* Check for any matches. */
> > + acl_match_check_x2(0, ctx, parms, &flows, &indicies,
mm_match_mask64.m);
> > +
> > + while (flows.started > 0) {
> > +
> > + /* Gather 4 bytes of input data for each stream. */
> > + input = MM_INSERT32(mm_ones_16.m, GET_NEXT_4BYTES(parms,
0), 0);
> > + input = MM_INSERT32(input, GET_NEXT_4BYTES(parms, 1), 1);
> > +
> > + /* Process the 4 bytes of input on each stream. */
> > +
> > + input = transition2(mm_index_mask64.m, input,
> > + mm_shuffle_input64.m, mm_ones_16.m,
> > + mm_bytes64.m, mm_type_quad_range64.m,
> > + flows.trans, &indicies);
> > +
> > + input = transition2(mm_index_mask64.m, input,
> > + mm_shuffle_input64.m, mm_ones_16.m,
> > + mm_bytes64.m, mm_type_quad_range64.m,
> > + flows.trans, &indicies);
> > +
> > + input = transition2(mm_index_mask64.m, input,
> > + mm_shuffle_input64.m, mm_ones_16.m,
> > + mm_bytes64.m, mm_type_quad_range64.m,
> > + flows.trans, &indicies);
> > +
> > + input = transition2(mm_index_mask64.m, input,
> > + mm_shuffle_input64.m, mm_ones_16.m,
> > + mm_bytes64.m, mm_type_quad_range64.m,
> > + flows.trans, &indicies);
> > +
> > + /* Check for any matches. */
> > + acl_match_check_x2(0, ctx, parms, &flows, &indicies,
> > + mm_match_mask64.m);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int
> > +rte_acl_classify_sse(const struct rte_acl_ctx *ctx, const uint8_t
**data,
> > + uint32_t *results, uint32_t num, uint32_t categories)
> > +{
> > + if (categories != 1 &&
> > + ((RTE_ACL_RESULTS_MULTIPLIER - 1) & categories) != 0)
> > + return -EINVAL;
> > +
> > + if (likely(num >= MAX_SEARCHES_SSE8))
> > + return search_sse_8(ctx, data, results, num, categories);
> > + else if (num >= MAX_SEARCHES_SSE4)
> > + return search_sse_4(ctx, data, results, num, categories);
> > + else
> > + return search_sse_2(ctx, data, results, num, categories);
> > +}
> > diff --git a/lib/librte_acl/rte_acl.c b/lib/librte_acl/rte_acl.c
> > index 7c288bd..0cde07e 100644
> > --- a/lib/librte_acl/rte_acl.c
> > +++ b/lib/librte_acl/rte_acl.c
> > @@ -38,6 +38,21 @@
> >
> > TAILQ_HEAD(rte_acl_list, rte_tailq_entry);
> >
> > +/* by default, use always avaialbe scalar code path. */
> > +rte_acl_classify_t rte_acl_default_classify = rte_acl_classify_scalar;
> > +
> make this static, the outside world shouldn't need to see it.
>
> > +void __attribute__((constructor(INT16_MAX)))
> > +rte_acl_select_classify(void)
> Make it static, The outside world doesn't need to call this.
>
> > +{
> > + if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1)) {
> > + /* SSE version requires SSE4.1 */
> > + rte_acl_default_classify = rte_acl_classify_sse;
> > + } else {
> > + /* reset to scalar version. */
> > + rte_acl_default_classify = rte_acl_classify_scalar;
> Don't need the else clause here, the static initalizer has you covered.
> > + }
> > +}
> > +
> > +
> > +/**
> > + * Invokes default rte_acl_classify function.
> > + */
> > +extern rte_acl_classify_t rte_acl_default_classify;
> > +
> Doesn't need to be extern.
> > +#define rte_acl_classify(ctx, data, results, num, categories) \
> > + (*rte_acl_default_classify)(ctx, data, results, num, categories)
> > +
> Not sure why you need this either. The rte_acl_classify_t should be
enough, no?
>
> Regards
> Neil
>
>
next prev parent reply other threads:[~2014-08-07 20:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-07 18:31 Konstantin Ananyev
2014-08-07 20:11 ` Neil Horman
2014-08-07 20:58 ` Vincent JARDIN [this message]
2014-08-07 21:28 ` Chris Wright
2014-08-08 2:07 ` Neil Horman
2014-08-08 11:49 ` Ananyev, Konstantin
2014-08-08 12:25 ` Neil Horman
2014-08-08 13:09 ` Ananyev, Konstantin
2014-08-08 14:30 ` Neil Horman
2014-08-11 22:23 ` Thomas Monjalon
2014-08-21 20:15 ` [dpdk-dev] [PATCHv3] " Neil Horman
2014-08-25 16:30 ` Ananyev, Konstantin
2014-08-26 17:44 ` Neil Horman
2014-08-27 11:25 ` Ananyev, Konstantin
2014-08-27 18:56 ` Neil Horman
2014-08-27 19:18 ` Ananyev, Konstantin
2014-08-28 9:02 ` Richardson, Bruce
2014-08-28 15:55 ` Neil Horman
2014-08-28 20:38 ` [dpdk-dev] [PATCHv4] " Neil Horman
2014-08-29 17:58 ` Ananyev, Konstantin
2014-09-01 11:05 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAG8AbRVUFLhzeKmA+Hx8sBNHnBr6608ebDyfEuSBu7Hx-RxWdw@mail.gmail.com \
--to=vincent.jardin@6wind.com \
--cc=dev@dpdk.org \
--cc=nhorman@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).