* [dpdk-dev] rte_eth_dev_count() returns 0 with ENA device
@ 2019-06-06 21:26 Reeve Yang
2019-06-07 0:21 ` Reeve Yang
0 siblings, 1 reply; 3+ messages in thread
From: Reeve Yang @ 2019-06-06 21:26 UTC (permalink / raw)
To: dev
Hi Gurus,
I'm trying to bring VM under Amzaon EC2 R4.16xlarge instance, so the
ethernet device is uising Amazon ENA driver. The kernel is 3.10, dpdk
is 18.02. All ether device are bound successfully, but for some
reason, the DPDK data path cannot be initialized because
rte_eth_dev_count() always returns zero. Can someone shed some lights?
Thanks.
I'm pretty sure the VM instance is set up correctly in terms ENA enabled.
Below are some details:
# modinfo ena
filename:
/lib/modules/3.10.0-693.11.6.el7.228052.x86_64/kernel/drivers/net/ethernet/amazon/ena/ena.ko.xz
version: 1.0.2
license: GPL
description: Elastic Network Adapter (ENA)
author: Amazon.com, Inc. or its affiliates
rhelversion: 7.4
# lspci -vt
-[0000:00]-+-00.0 Intel Corporation 440FX - 82441FX PMC [Natoma]
+-01.0 Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
+-01.1 Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
+-01.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI
+-02.0 Cirrus Logic GD 5446
+-03.0 Device 1d0f:ec20
+-04.0 Device 1d0f:ec20
+-05.0 Device 1d0f:ec20
+-06.0 Device 1d0f:ec20
+-07.0 Device 1d0f:ec20
+-08.0 Device 1d0f:ec20
+-09.0 Device 1d0f:ec20
+-0a.0 Device 1d0f:ec20
+-0b.0 Device 1d0f:ec20
\-1f.0 XenSource, Inc. Xen Platform Device
# dpdk-devbind.py -s
Network devices using DPDK-compatible driver
============================================
0000:00:04.0 'Device ec20' drv=igb_uio unused=ena
0000:00:05.0 'Device ec20' drv=igb_uio unused=ena
0000:00:06.0 'Device ec20' drv=igb_uio unused=ena
0000:00:07.0 'Device ec20' drv=igb_uio unused=ena
0000:00:08.0 'Device ec20' drv=igb_uio unused=ena
0000:00:09.0 'Device ec20' drv=igb_uio unused=ena
0000:00:0a.0 'Device ec20' drv=igb_uio unused=ena
0000:00:0b.0 'Device ec20' drv=igb_uio unused=ena
Network devices using kernel driver
===================================
0000:00:03.0 'Device ec20' if=nic0_0 drv=ena unused=igb_uio *Active*
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] rte_eth_dev_count() returns 0 with ENA device
2019-06-06 21:26 [dpdk-dev] rte_eth_dev_count() returns 0 with ENA device Reeve Yang
@ 2019-06-07 0:21 ` Reeve Yang
2019-06-07 10:37 ` Michał Krawczyk
0 siblings, 1 reply; 3+ messages in thread
From: Reeve Yang @ 2019-06-07 0:21 UTC (permalink / raw)
To: dev
some followup ... I debugged more, it looks like rte_pci_probe is not
happening, so the rte_eth_dev_allocate is not called at all ..., buy
why is that? I ran testpmd, it shows no probed ethernet device.
# /opt/bluecoat/sslv/bin/testpmd testpmd -n 2 -l 2-3 -w 0000:00:04.0
-m 256 -- -i
EAL: Detected 48 lcore(s)
EAL: Multi-process socket /var/run/.rte_unix
EAL: Probing VFIO support...
testpmd: No probed ethernet devices
Interactive-mode selected
...
Any help is greatly appreciated
On Thu, Jun 6, 2019 at 2:26 PM Reeve Yang <reeve.yang@gmail.com> wrote:
>
> Hi Gurus,
>
> I'm trying to bring VM under Amzaon EC2 R4.16xlarge instance, so the
> ethernet device is uising Amazon ENA driver. The kernel is 3.10, dpdk
> is 18.02. All ether device are bound successfully, but for some
> reason, the DPDK data path cannot be initialized because
> rte_eth_dev_count() always returns zero. Can someone shed some lights?
> Thanks.
>
> I'm pretty sure the VM instance is set up correctly in terms ENA enabled.
>
> Below are some details:
> # modinfo ena
> filename:
> /lib/modules/3.10.0-693.11.6.el7.228052.x86_64/kernel/drivers/net/ethernet/amazon/ena/ena.ko.xz
> version: 1.0.2
> license: GPL
> description: Elastic Network Adapter (ENA)
> author: Amazon.com, Inc. or its affiliates
> rhelversion: 7.4
>
> # lspci -vt
> -[0000:00]-+-00.0 Intel Corporation 440FX - 82441FX PMC [Natoma]
> +-01.0 Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
> +-01.1 Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
> +-01.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI
> +-02.0 Cirrus Logic GD 5446
> +-03.0 Device 1d0f:ec20
> +-04.0 Device 1d0f:ec20
> +-05.0 Device 1d0f:ec20
> +-06.0 Device 1d0f:ec20
> +-07.0 Device 1d0f:ec20
> +-08.0 Device 1d0f:ec20
> +-09.0 Device 1d0f:ec20
> +-0a.0 Device 1d0f:ec20
> +-0b.0 Device 1d0f:ec20
> \-1f.0 XenSource, Inc. Xen Platform Device
> # dpdk-devbind.py -s
>
> Network devices using DPDK-compatible driver
> ============================================
> 0000:00:04.0 'Device ec20' drv=igb_uio unused=ena
> 0000:00:05.0 'Device ec20' drv=igb_uio unused=ena
> 0000:00:06.0 'Device ec20' drv=igb_uio unused=ena
> 0000:00:07.0 'Device ec20' drv=igb_uio unused=ena
> 0000:00:08.0 'Device ec20' drv=igb_uio unused=ena
> 0000:00:09.0 'Device ec20' drv=igb_uio unused=ena
> 0000:00:0a.0 'Device ec20' drv=igb_uio unused=ena
> 0000:00:0b.0 'Device ec20' drv=igb_uio unused=ena
>
> Network devices using kernel driver
> ===================================
> 0000:00:03.0 'Device ec20' if=nic0_0 drv=ena unused=igb_uio *Active*
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] rte_eth_dev_count() returns 0 with ENA device
2019-06-07 0:21 ` Reeve Yang
@ 2019-06-07 10:37 ` Michał Krawczyk
0 siblings, 0 replies; 3+ messages in thread
From: Michał Krawczyk @ 2019-06-07 10:37 UTC (permalink / raw)
To: dev
Hi Reeve,
On 07.06.2019 02:21, Reeve Yang wrote:
> some followup ... I debugged more, it looks like rte_pci_probe is not
> happening, so the rte_eth_dev_allocate is not called at all ..., buy
> why is that? I ran testpmd, it shows no probed ethernet device.
>
>
> # /opt/bluecoat/sslv/bin/testpmd testpmd -n 2 -l 2-3 -w 0000:00:04.0
> -m 256 -- -i
> EAL: Detected 48 lcore(s)
> EAL: Multi-process socket /var/run/.rte_unix
> EAL: Probing VFIO support...
> testpmd: No probed ethernet devices
> Interactive-mode selected
> ...
>
> Any help is greatly appreciated
>
> On Thu, Jun 6, 2019 at 2:26 PM Reeve Yang <reeve.yang@gmail.com> wrote:
>>
>> Hi Gurus,
>>
>> I'm trying to bring VM under Amzaon EC2 R4.16xlarge instance, so the
>> ethernet device is uising Amazon ENA driver. The kernel is 3.10, dpdk
>> is 18.02. All ether device are bound successfully, but for some
>> reason, the DPDK data path cannot be initialized because
>> rte_eth_dev_count() always returns zero. Can someone shed some lights?
On my setup it works fine. I've used 3.13 kernel and DPDK v18.02 and
r4.18xl. I can probe and attach ENA on 00:04.0.
I was using ami-02699dba41e68180a Ubuntu Server 14.04 LTS. I also
couldn't reproduce your issue on kernel 4.4, it works fine for me.
rte_eth_dev_count() is returning 1 in my case, because I have 1 ENA
available.
Could you give more details what AMI are you using?
>> Thanks.
>>
>> I'm pretty sure the VM instance is set up correctly in terms ENA enabled.
>>
>> Below are some details:
>> # modinfo ena
>> filename:
>> /lib/modules/3.10.0-693.11.6.el7.228052.x86_64/kernel/drivers/net/ethernet/amazon/ena/ena.ko.xz
>> version: 1.0.2
>> license: GPL
>> description: Elastic Network Adapter (ENA)
>> author: Amazon.com, Inc. or its affiliates
>> rhelversion: 7.4
>>
>> # lspci -vt
>> -[0000:00]-+-00.0 Intel Corporation 440FX - 82441FX PMC [Natoma]
>> +-01.0 Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
>> +-01.1 Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
>> +-01.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI
>> +-02.0 Cirrus Logic GD 5446
>> +-03.0 Device 1d0f:ec20
>> +-04.0 Device 1d0f:ec20
>> +-05.0 Device 1d0f:ec20
>> +-06.0 Device 1d0f:ec20
>> +-07.0 Device 1d0f:ec20
>> +-08.0 Device 1d0f:ec20
>> +-09.0 Device 1d0f:ec20
>> +-0a.0 Device 1d0f:ec20
>> +-0b.0 Device 1d0f:ec20
>> \-1f.0 XenSource, Inc. Xen Platform Device
>> # dpdk-devbind.py -s
>>
>> Network devices using DPDK-compatible driver
>> ============================================
>> 0000:00:04.0 'Device ec20' drv=igb_uio unused=ena
>> 0000:00:05.0 'Device ec20' drv=igb_uio unused=ena
>> 0000:00:06.0 'Device ec20' drv=igb_uio unused=ena
>> 0000:00:07.0 'Device ec20' drv=igb_uio unused=ena
>> 0000:00:08.0 'Device ec20' drv=igb_uio unused=ena
>> 0000:00:09.0 'Device ec20' drv=igb_uio unused=ena
>> 0000:00:0a.0 'Device ec20' drv=igb_uio unused=ena
>> 0000:00:0b.0 'Device ec20' drv=igb_uio unused=ena
>>
>> Network devices using kernel driver
>> ===================================
>> 0000:00:03.0 'Device ec20' if=nic0_0 drv=ena unused=igb_uio *Active*
Thanks,
Michal
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-06-07 10:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-06 21:26 [dpdk-dev] rte_eth_dev_count() returns 0 with ENA device Reeve Yang
2019-06-07 0:21 ` Reeve Yang
2019-06-07 10:37 ` Michał Krawczyk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).